Table of Contents
Philips HTL3120/12 User Manual
Displayed below is the user manual for HTL3120/12 by Philips which is a product in the Soundbar Speakers category. This manual has pages.
Related Manuals
HTL3120
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
HTL3120_12_UM_V4.0.indb 2 2013/10/21 11:46:43
1
English
EN
Contents
1 Important 2
Safety 2
Mains fuse 3
Care for your product 3
Care of the environment 3
Compliance 3
Help and support 4
2 Your SoundBar 4
Main unit 4
Remote control 4
Connectors 6
3 Connect and set up 7
Connect to TV 7
Connect digital devices through HDMI 7
Connect audio from TV and other
devices 8
Set up EasyLink (HDMI-CEC control) 8
4 Use your SoundBar 9
Adjust the volume 9
Choose your sound 9
MP3 player 10
USB storage devices 10
Play audio through Bluetooth 11
Auto standby 11
Apply factory settings 12
5 Wall mount 12
6 Product specications 13
7 Troubleshooting 14
HTL3120_12_UM_V4.0.indb 1 2013/10/21 11:46:44
2EN
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Consumer Care to
have the product checked before use.
• Never place the product and accessories
nearnakedamesorotherheatsources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the SoundBar!
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Neverinstallthisproductinaconned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
HTL3120_12_UM_V4.0.indb 2 2013/10/21 11:46:44
3
English
EN
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Mains fuse
This information applies only to products with a
UK mains plug.
Thisproductisttedwithanapprovedmolded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
Copyright in the U.K.
• Recording and playback of material may
require consent. See Copyright Act 1956
and The Performer’s Protection Acts 1958
to 1972.
Care for your product
Useonlymicroberclothtocleantheproduct.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, WOOX Innovations, declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at www.
philips.com/support.
1797
HTL3120_12_UM_V4.0.indb 3 2013/10/21 11:46:44
4EN
Help and support
For extensive online support, visit www.philips.
com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• ndanswerstofrequentlyanswered
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your
product.Youcanndthisinformationonthe
back or bottom of your product.
2 Your SoundBar
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfrom
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a (Standby-On/Standby indicator)
• Switch the SoundBar on or to standby.
• When the SoundBar is in standby, the
standby indicator turns red.
b VOLUME +-
Increase or decrease volume.
c SOURCE
Select an input source or Bluetooth mode
for the SoundBar.
d Display panel
Remote control
This section includes an overview of the
remote control.
abc
d
HTL3120_12_UM_V4.0.indb 4 2013/10/21 11:46:45
5
English
EN
a (Standby-On)
• Switch the SoundBar on or to standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b HDMI ARC
Switch your source to HDMI ARC
connection. If the connected TV is not
HDMI ARC compliant or an unsupported
audio format is detected, “ARC” on the
display panel blinks.
3
9
10
11
12
13
14
1
2
19
15
17
16
18
21
20
22
23
4
5
6
7
8
c HDMI 1
Switch your source to the HDMI IN 1
connection.
d OPTICAL
Switch your audio source to the optical
connection.
e AUDIO-IN
Switch your audio source to the MP3
connection (3.5mm jack).
f Bluetooth
Switch to Bluetooth mode.
g (Repeat)
Selectorturnoffrepeat/shufemodein
USB mode.
h / (Previous/Next)
Skip to the previous or next track in USB
mode and Bluetooth mode (only for
AVRCP-supported Bluetooth devices).
i SOUND
Select a sound mode.
j DIM
Set the brightness of SoundBar display
panel.
k AUTO VOL
Turn auto volume on or off.
l NIGHT MODE
Turn night mode on or off.
m BASS +/-
Increase or decrease bass.
n TREBLE +/-
Increase or decrease treble.
o AUDIO SYNC +/-
Increase or decrease audio delay.
p +/- (Volume)
Increase or decrease volume.
q (Mute)
Mute or restore volume.
r SURR
• Select surround or stereo sound.
HTL3120_12_UM_V4.0.indb 5 2013/10/21 11:46:46
6EN
• In HDMI in mode (connected via
HDMI IN 1 or HDMI IN 2), press and
hold to switch audio output from the
Soundbar speaker or TV speaker.
s (Play/Pause)
• Start, pause or resume play in USB
mode and Bluetooth mode (only for
AVRCP-supported Bluetooth devices).
• Press and hold to stop play in USB
mode.
t USB
Switch to USB mode.
u AUX
Switch your audio source to the AUX
connection.
v COAX
Switch your audio source to the coaxial
connection.
w HDMI 2
Switch your source to the HDMI IN 2
connection.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
Side connectors
a AUDIO-IN
Audio input from an MP3 player (3.5mm
jack).
b (USB)
Audio input from a USB storage device.
Rear connectors
a AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
b DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
c DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
d TO TV-HDMI OUT (ARC)
Connect to the HDMI input on the TV.
e HDMI IN 1 / HDMI IN 2
Connect to the HDMI output on a digital
device.
f AC MAINS~
Connect to the power supply.
HTL3120_12_UM_V4.0.indb 6 2013/10/21 11:46:46
7
English
EN
3 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•Foridenticationandsupplyratings,seethetypeplate
at the back or bottom of the product.
•Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect to TV
Connect your SoundBar to a TV. You can listen
to audio from TV programs through your
SoundBar. Use the best quality connection
available on your SoundBar and TV.
Connect to TV through HDMI (ARC)
Your SoundBar supports HDMI version with
Audio Return Channel (ARC). If your TV is
HDMI ARC compliant, you can hear the TV
audio through your SoundBar by using a single
HDMI cable.
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
TV
SoundBar to the HDMI ARC connector
on the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
2 On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
Note
•If your TV is not HDMI ARC compliant, connect
an audio cable to hear the TV audio through your
SoundBar. (see 'Connect audio from TV and other
devices' on page 8)
•If your TV has a DVI connector, you can use an HDMI/
DVI adapter to connect to TV. However, some of the
features may not be available.
Connect digital devices
through HDMI
Connect a digital device such as a set-top box,
DVD/Blu-ray player, or games console to your
SoundBar through a single HDMI connection.
When you connect the devices in this way and
playaleorgame,the
• video is automatically displayed on your
TV, and
• audio is automatically played on your
SoundBar.
1 Using a High Speed HDMI cable, connect
the HDMI OUT connector on your digital
device to the HDMI IN 1/2 on your
SoundBar.
2 Connect your SoundBar to TV through
HDMI OUT (ARC).
• If the TV is not HDMI CEC compliant,
select the correct video input on your
TV.
3 On the connected device, turn on HDMI-
CEC operations. For details, see the user
manual of the device.
HTL3120_12_UM_V4.0.indb 7 2013/10/21 11:46:47
8EN
Connect audio from TV and
other devices
Play audio from TV or other devices through
your Soundbar speakers.
Use the best quality connection available on
your TV, Soundbar, and other devices.
Note
•When your Soundbar and TV are connected through
HDMI ARC, an audio connection is not required. (see
'Connect to TV through HDMI (ARC)' on page 7)
Option 1: Connect audio through a
digital optical cable
Best quality audio
1 Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on the TV
or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
TV
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.
Set up EasyLink (HDMI-CEC
control)
Your SoundBar supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
DVD
HTL3120_12_UM_V4.0.indb 8 2013/10/21 11:46:47
9
English
EN
Control) protocol. EasyLink-compliant devices
that are connected through HDMI can be
controlled by a single remote control.
Note
•Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
Before you start
• Connect your SoundBar to the HDMI-
CEC compliant device through HDMI
connection.
• Make the necessary connections described
in the quick start guide, and then select the
correct audio source for the connected
device.
• On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
EasyLink controls
With EasyLink, you can control your SoundBar,
TV, and other connected HDMI-CEC compliant
devices with a single remote control.
• One-touch standby: If one-touch standby
is enabled, your SoundBar can switch to
standby with the remote control of the TV
or other HDMI-CEC devices.
4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the SoundBar to the correct source
for other devices.
Adjust the volume
1 Press +/- (Volume) to increase or decrease
a volume level.
• To mute sound, press (Mute).
• To restore the sound, press (Mute)
again or press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Selectpredenedsoundmodestosuityour
video or music.
1 Press SOUND to select a sound option
from the display panel.
• AUtO: Automatically select a sound
setting based on the sound stream.
• OFF: Experience the original sound of
your movies and music, without added
sound effects.
• POWEr: Enjoy thrilling arcade sounds,
ideal for action-packed videos and loud
parties.
HTL3120_12_UM_V4.0.indb 9 2013/10/21 11:46:47
10 EN
• HIGH: Spice up your dull movies and
music with added sound effects.
• CLEAr: Hear every detail in your music
and clear voices in your movies.
• dEEP: Experience spoken words and
music vocals in comfort.
• OWN: Personalize the sound based on
your preferences.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SURR to select a sound option from
the display panel.
• AUtO: Intelligently select the best
surround sound mode based on the
media played.
• OFF: Two-channel stereo sound. Ideal
for listening to music.
• SURR: Multi-channel surround output.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
1 Press AUTO VOL to turn auto volume on
or off.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press AUDIO SYNC +/- to synchronize
the audio with the video.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1 Press NIGHT MODE to turn night mode
on or off.
Note
•If auto volume is set to turned on, you cannot enable
the night mode.
MP3 player
Connect your MP3 player to play your audio
lesormusic.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2 Press AUDIO-IN on the remote control.
3 Press the buttons on the MP3 player to
selectandplayaudiolesormusic.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3playerandUSBashmemory,etc.
What you need
• A USB storage device that is formatted
forFATlesystems,andcomplieswiththe
Mass Storage Class.
• AnMP3orWMAleonaUSBstorage
device
1 Connect a USB storage device to the
SoundBar.
2 Press USB on the remote control.
HTL3120_12_UM_V4.0.indb 10 2013/10/21 11:46:47
11
English
EN
3 Use the remote control to control play.
Button Action
Start, pause or resume play.
Press and hold to stop play.
/ Skip to the previous or next track.
(Repeat)
Selectorturnoffrepeat/shufe
mode.
Note
•This product may not be compatible with certain types
of USB storage device.
•If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•Digital camera PTP protocols are not supported.
•Do not remove the USB storage device while it is
being read.
•DRM-protectedmusicles(MP3,WMA)arenot
supported.
•Support a USB port: 5V , 1A.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
youcanlistentotheaudiolesstoredonthe
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
BluetoothproleA2DP,AVRCPandwith
Bluetooth version as 3.0 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control
to switch the SoundBar to Bluetooth
mode.
» bt is displayed on the display panel,
blinking.
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL3120 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, bt on the display
panel blinks.
3 Wait until you hear a beep sound from the
SoundBar.
» When the Bluetooth connection
succeeds, bt is displayed on the display
panel without blinking.
» If the connection fails, bt on the display
panel blinks continuously.
4 Selectandplayaudiolesormusicon
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If your Bluetooth device supports
AVRCPprole,ontheremotecontrol
you can press / to skip to a track,
or press to pause/resume play.
5 To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•If you want to connect your SoundBar with another
Bluetooth device, press and hold Bluetooth on the
remote control to disconnect the currently connected
Bluetooth device.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
• no button is pressed for 29 minutes, and
• no audio/video play from a connected
device.
HTL3120_12_UM_V4.0.indb 11 2013/10/21 11:46:48
12 EN
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
1 In AUX mode, within three seconds, press
VOL-, BASS-,and Treble-.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.
5 Wall mount
Note
•Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•Before wall mounting, make sure the wall can support
the weight of your SoundBar.
•Before wall mount, you need not remove the three
rubber feet at the bottom of the soundbar, otherwise
therubberfeetcannotbexedback.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
For information about how to wall mount your
SoundBar, see the quick start guide.
> 25mm
3.5-4mm
4mm
HTL3120_12_UM_V4.0.indb 12 2013/10/21 11:46:48
13
English
EN
6 Product
specifications
Note
•Specicationsanddesignaresubjecttochangewithout
notice.
Amplier
• Total output power: 120W RMS (+/- 0.5
dB, 30% THD) / 96W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 750 mV
• AUDIO-IN: 400 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32
• SupportsMP3andWMAleformats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
Bluetooth
•Bluetoothproles:A2DP,AVRCP
•Bluetooth version: 3.0 + EDR
Main unit
•Power supply: 110-240 V~, 50/60 Hz
•Power consumption: 25 W
•Standbypowerconsumption:≤0.5W
• Speaker impedance: 8 ohm
• Speaker drivers: 4 x 3" woofer
•Dimensions (WxHxD):
995 x 94 x 102.5 mm
•Weight: 3.5 kg
Remote control batteries
• 2 x AAA-R03-1.5 V
HTL3120_12_UM_V4.0.indb 13 2013/10/21 11:46:48
14 EN
7 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the SoundBar do not work.
• Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from your
SoundBar to your TV or other devices.
However, you do not need a separate
audio connection when:
• the SoundBar and TV are connected
through HDMI ARC connection, or
• a device is connected to the HDMI IN
connector on your SoundBar.
• Reset your SoundBar to its factory settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundBar is not muted.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.
Bluetooth
A device cannot connect with the SoundBar.
• The device does not support the
compatibleprolesrequiredforthe
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundBar.
HTL3120_12_UM_V4.0.indb 14 2013/10/21 11:46:48
HTL3120_12_UM_V4.0.indb 16 2013/10/21 11:46:53
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are
used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
HTL3120_12_UM_V4.0