Table of Contents
Philips MCM1006/93 User Manual
Displayed below is the user manual for MCM1006/93 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
Register your product and get support at
注册您的产品并在以下网站链接中了解详情
www.philips.com/welcome
ZH-CN 用户手册 17
EN User manual 3
MCM1006
MCM1006_93_UM_V3.0.indb 1 2013/3/18 10:25:09
3
English
EN
Contents
1 Important 4
Safety 4
Notice 4
2 Your micro music system 6
Introduction 6
What's in the box 6
Overview of the system 7
3 Get started 8
Connect power 8
Turn on and select a source 8
4 Play discs 8
Control play 8
Program tracks 9
5 Play from a USB storage device 10
Control play 10
Program tracks 11
6 Listen to radio 11
7 Listen to an external device 12
8 Adjust sound 12
Adjust the volume level 12
Use the DBB sound effect 12
9 Product information 13
Specications 13
USB playability information 13
Supported MP3 disc formats 14
Maintenance 14
10 Troubleshooting 15
MCM1006_93_UM_V3.0.indb 3 2013/3/18 10:25:09
4EN
1 Important
Safety
Read and understand all instructions before
you use this micro music system. If damage is
caused by failure to follow the instructions, the
warranty does not apply.
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
• Never place the product and accessories
nearnakedamesorotherheatsources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Make sure that you always have easy
access to the power adaptor to disconnect
the product from the power outlet.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power adaptor,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, make sure that the power
voltage matches the value printed on the
bottom of the product. Never connect the
product to the power outlet if the voltage
is different.
• Avoid force coming onto power plugs.
Loosepowerplugscancausearcingorre.
Risk of injury or damage to the product!
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside
the disc compartment.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Risk of overheating!
• Neverinstallthisproductinaconned
space. Always leave a space of at least four
inches around the product for ventilation.
• Make sure that curtains or other objects
never cover the ventilation slots on the
product.
Risk of swallowing batteries!
• The product may contain a coin type
battery, which can be swallowed. Keep the
battery out of reach of children at all times!
Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Compliance
This apparatus includes this label:
MCM1006_93_UM_V3.0.indb 4 2013/3/18 10:25:10
5
English
EN
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Copyright
The making of unauthorized copies of copy-
protected material, including computer
programs,les,broadcastsandsound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
2013 © Koninklijke Philips Electronics N.V.
Specicationsaresubjecttochangewithout
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Note
•The type plate is located on the bottom of the system.
MCM1006_93_UM_V3.0.indb 5 2013/3/18 10:25:11
6EN
2 Your micro
music system
Introduction
With this system, you can:
• enjoy audio from discs, USB storage
devices, and other external devices
• listen to FM radio stations
You can enrich sound output with the sound
effect:
• Dynamic bass boost (DBB)
Playable media:
• Discs: CD-DA, CD-R, CD-RW, MP3-CD,
WMA-CD
• Files: .mp3, .wma
What's in the box
Check and identify the contents of the package:
• Micro music system
• MP3 link cable
• User manual
• Quick start guide
MCM1006_93_UM_V3.0.indb 6 2013/3/18 10:25:11
7
English
EN
Overview of the system
a Cover of disc compartment
b Disc compartment
c Integrated speaker
d DBB
• Slide to enable or disable the DBB
sound effect.
e Indicator window
• Indicate the frequency of current FM
radio station.
f TUNING
• Rotate to select an FM radio frequency.
g PROG
• Program audio tracks.
h MODE
• Press repeatedly to select a play mode.
i STOP
• Stop the play of audio tracks.
a
b
c
d
e
f
g
h
j
i
n
l
k
m
o
p
q
j PLAY/PAUSE
• Start, pause, or resume the play of
audio tracks.
k / PREVIOUS/NEXT
• Skip to the previous/next audio track.
l ALBUM - /ALBUM +
• Skip to the previous/next album.
m USB DIRECT
• Connect to a USB storage device.
n - VOLUME +
• Rotate to adjust the volume level.
o LCD screen
p MP3-LINK
• Connect to the audio output socket
(usually the headphone socket) of an
external device.
q Power switch and source selector
• Slide to select a source or turn off the
system.
MCM1006_93_UM_V3.0.indb 7 2013/3/18 10:25:24
8EN
3 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Connect power
Connect the power adaptor to the power
supply socket.
Turn on and select a source
Slide the power switch and source selector to
CD, USB, or FM.
» The LED indicator beside the LCD screen
lights up in red.
• To turn off the system, slide it to OFF.
• When the power switch and source
selector is not in the "OFF" position and an
MP3 link cable is connected to the MP3-
LINK socket, the system automatically
switches the source to audio input through
the MP3-LINK socket.
4 Play discs
1 Slide the power switch and source selector
to CD.
2 Lift the cover of disc compartment.
3 Load a disc with the printed side facing
upwards.
4 Close the cover of disc compartment.
» Play starts automatically after a few
seconds.
• If play does not start automatically,
press to start play.
Control play
During play, follow the instructions below to
control play.
Buttons Function LCD displays
Start or resume
play.
the track
number, ,
and
Pause play. the track
number, , and
(blinking)
Stop play. the total
number of
tracks and
/ Press to skip to
the previous or
next track.
the track
number, ,
and
/ Press and hold to
rewind or search
forward fast within
a track.
the track
number, ,
and
ALBUM - /
ALBUM +
Skip to the
previous or next
album when no
less than one
album exists.
the track
number, ALB,
and
MCM1006_93_UM_V3.0.indb 8 2013/3/18 10:25:36
9
English
EN
Program tracks
Note
•You can program a maximum of 20 tracks.
•During programming, if no operation is made within
20 seconds, the system returns to stop mode without
saving programmed tracks.
For a CD
1 Press to stop play.
» The total number of tracks is displayed.
2 Press PROG to activate the programming.
» PROG is displayed, and blinks.
3 Press / (or ALBUM - /ALBUM +)
to select a track.
» The track number blinks.
4 Press PROG again to program the selected
track.
5 Repeat steps 3 and 4 to program more
tracks.
6 Press to start play.
For a WMA/MP3 disc
1 Press to stop play.
» The total number of tracks is displayed.
2 Press PROG to activate the programming.
» PROG is displayed, and blinks.
3 Press / (or ALBUM - /ALBUM +)
repeatedly to select an album.
» The album number and ALB blinks.
4 Press PROGagaintoconrmtheselected
album.
» A track number is displayed, and ALB
disappears.
5 Press / (or ALBUM - /ALBUM +)
repeatedly to select a track.
6 Press PROGagaintoconrmtheselected
track.
7 Repeat steps 3 to 6 to program more
tracks.
8 Press to start play.
Erase the program
To erase the program,
• Press twice.
• Slide the power switch and source selector.
MCM1006_93_UM_V3.0.indb 9 2013/3/18 10:25:36
10 EN
5 Play from a USB
storage device
Thissystemcanplay.mp3and.wmalesthat
are copied onto a supported USB storage
device:
• Flash drive
• Memory card reader
• HDD: hard disc drive (This product can
detect only a portable HDD with USB
power peak current no more than 500
mA.)
Note
•Philips does not guarantee compatibility with all USB
storage devices.
•NTFS(NewTechnologyFileSystem)lesystemisnot
supported.
1 Slide the power switch and source selector
to USB.
2 Connect the USB storage device to the
USB DIRECT socket.
» Play starts automatically after a few
seconds.
• If play does not start automatically,
press to start play.
Control play
During play, follow the instructions below to
control play.
Buttons Function LCD displays
Start or
resume play.
the track number,
WMA/MP3 (track
format), , and
Pause play. the track number,
WMA/MP3 (track
format), , and
(blinking)
Stop play. the total number of
tracks, WMA/MP3
(track format), and
/ Press to
skip to the
previous or
next track.
the track number,
WMA/MP3 (track
format), , and
/ Press and
hold to
rewind
or search
forward
fast within a
track.
the track number,
WMA/MP3 (track
format), , and
ALBUM -
/ALBUM +
Skip to the
previous or
next album
when no less
than one
album exists.
the album number,
ALB, WMA/MP3
(track format), and
MCM1006_93_UM_V3.0.indb 10 2013/3/18 10:25:48
11
English
EN
Program tracks
Note
•You can program a maximum of 20 tracks.
•During programming, if no operation is made within
20 seconds, the system returns to stop mode without
saving programmed tracks.
1 Press to stop play.
» The total number of tracks is displayed.
2 Press PROG to activate the programming.
» PROG is displayed, and blinks.
3 Press / (or ALBUM - /ALBUM +)
repeatedly to select an album.
» The album number and ALB blinks.
4 Press PROGagaintoconrmtheselected
album.
» A track number is displayed, and ALB
disappears.
5 Press / (or ALBUM - /ALBUM +)
repeatedly to select a track.
6 Press PROGagaintoconrmtheselected
track.
7 Repeat steps 3 to 6 to program more
tracks.
8 Press to start play.
Erase the program
To erase the program,
• Press twice.
• Slide the power switch and source selector.
6 Listen to radio
Note
•For optimal reception, fully extend the FM antenna and
adjust its position.
1 Slide the power switch and source selector
to FM.
2 Rotate the TUNING knob to tune to an
FM radio station.
MCM1006_93_UM_V3.0.indb 11 2013/3/18 10:25:48
12 EN
7 Listen to an
external device
You can use the system as a speaker to amplify
the audio input from an external device, for
example, MP3 player.
1 Slide the power switch and source selector
to CD, USB, or FM.
2 Connect the MP3 link cable to
• the MP3-LINK socket on the system,
and
• the audio output socket (usually the
headphone socket) on the external
device.
3 Play the external device.
Note
•To play audio input from other sources, disconnect the
MP3 link cable from the system.
PM
3
-K
N
I
L
8 Adjust sound
The following operations are applicable to all
supported media.
Adjust the volume level
Rotate the - VOLUME + knob clockwise or
anti-clockwise to increase or decrease the
volume level.
Use the DBB sound effect
Slide DBB to ON to enable the DBB sound
effect.
• To disable the DBB sound effect, slide DBB
to OFF.
MCM1006_93_UM_V3.0.indb 12 2013/3/18 10:26:00
13
English
EN
9 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated output power 2 X 2 W RMS
Frequency response 40 Hz - 20 kHz,
±3 dB
Signal-to-noise ratio > 50 dB
MP3-Link input 600 mV RMS,
22 kOhm
Disc
Laser type Semiconductor
Disc diameter 12cm, 8cm
Support discs CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC 24 Bits, 44.1 kHz
Total harmonic distortion < 3% (1 kHz)
Frequency response 40 Hz - 20 kHz
(44.1 kHz)
S/N Ratio > 55 dB
Tuner (FM)
Tuning range 88-108 MHz
Sensitivity
- Mono, 26 dB S/N Ratio
- Stereo, 46 dB S/N Ratio
< 22 dBf
< 43 dBf
Total harmonic distortion < 3%
Signal-to-noise ratio > 50 dB
General information
AC power input 100-240 V ~, 50-60 Hz
Output of AC-DC
power adaptor 12 V , 1000 mA
Operation power
consumption 10 W
USB Direct Version 1.1
Dimensions
(W x H x D) 450 x 158 x 208 mm
Net weight 2.05 kg
USB playability information
Compatible USB storage devices:
• USBashmemory(USB1.1)
• USBashplayers(USB1.1)
• Memory cards (an additional card reader
required)
Supported formats:
• USBormemoryleformat:FAT12,FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bitrate (data rate): 32-320 Kbps and
variable bitrate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/folders: maximum 99
• Numberoftracks/les:maximum999
• File name in Unicode UTF8 (maximum
length: 16 bytes)
Unsupported formats:
• Empty album: an album that does not
containMP3/WMAles
• Unsupportedleformatsareskipped.For
example, Word documents (.doc) or MP3
leswithextension.dlfareignoredand
not played.
• AAC,WAV,PCMaudioles
• DRMprotectedWMAles(.wav,.m4a,
.m4p, .mp4, .aac)
• WMAlesinLosslessformat
MCM1006_93_UM_V3.0.indb 13 2013/3/18 10:26:00
14 EN
Supported MP3 disc formats
• ISO9660, Joliet
• Maximumtrack/lenumber:999
(dependingonlenamelength)
• Maximum album number: 99
• Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
• Supported bitrates: 32-320 kbps, variable
bitrates
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
• Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
MCM1006_93_UM_V3.0.indb 14 2013/3/18 10:26:00
15
English
EN
10 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the product yourself.
If you encounter problems when using this product, check the following points before requesting
service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When
you contact Philips, make sure that the product is nearby and the model number and serial number are
available.
Write down the model number and serial number for record.
• Model number:
• Serial number:
Problem Solution
No
power.
Make sure that the power adaptor is securely connected to the power supply.
Make sure that the power supply is available.
No sound
or poor
sound.
Adjust the volume level.
To play audio input from a source other than MP3-LINK socket, disconnect the MP3 link
cable.
No
response
from the
system.
Disconnect and reconnect the power adaptor, and then turn on the system again.
No disc is
detected.
Insert a disc.
Make sure that the printed side of the disc faces outwards.
Wait until the moisture condensation at the lens is cleared.
Replace or clean the disc.
Makesurethatthediscisnalizedandwithsupportedformat.
No USB
storage
device is
detected.
Make sure that the USB storage device is supported. USB 2.0 storage device and NTFS
lesystemarenotsupported.
MakesurethattheUSBstoragedeviceincludessupported.wmaor.mp3les.
Radio
reception
is poor.
Increase the distance between the system and your TV or VCR.
Fully extend the FM antenna.
Adjust the position of the FM antenna.
Connect an outdoor FM antenna instead.
MCM1006_93_UM_V3.0.indb 15 2013/3/18 10:26:00
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363 – 2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
Environmental Protection Use Period
This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate so that the use of these [substances or
elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
O O O O O O
O O O O O O
X O O O O O
X O O O O O
X O O O O O
MCM1006_93_UM_V3.0.indb 28 2013/3/18 10:26:51
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
MCM1006_93_UM_V3.0
MCM1006_93_UM_V3.0.indb 32 2013/3/18 10:26:52