Table of Contents
Philips NTX600/77 User Manual
Displayed below is the user manual for NTX600/77 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
NTX600
Question?
Contact
Philips
1EN
Contents
1 Important 2
Safety 2
2 Your Mini Hi-Fi System 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 7
3 Get started 8
Prepare the remote control 8
Connect 8
Turn on 9
Turn demo mode on or off 9
4 Play 10
Play from a disc or USB 10
Play audio through Bluetooth 12
Play from an external device 13
5 Listen to radio 15
Tune to a radio station 15
Program radio stations automatically 15
Program radio stations manually 15
Select a preset radio station 15
Change AM tuning grid 15
6 Adjust volume level and sound
effect 16
Adjust volume level 16
Mute sound 16
Apply AUTO DJ effect 16
Apply DJ effects manually 16
Select a preset sound effect 16
Enhance bass 16
Apply NX Bass effect 17
Adjust equalizer settings 17
7 Other features 18
Mix sound 18
Speak or sing with a microphone 18
Turn the decorative light on or off 18
Reverse the display 18
Listen through a headphone 18
8 Product information 19
Specications 19
USB playability information 20
Supported MP3 disc formats 20
Maintenance 20
9 Troubleshooting 21
General 21
About Bluetooth device 22
10 Notice 23
Care of the environment 23
Trademark notice 23
2EN
1 Important
Safety
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:Toreducetheriskofreorelectric
shock, this apparatus should not be exposed to
rainormoistureandobjectslledwithliquids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Warning
• Never remove the casing of this device.
• Never lubricate any part of this device.
• Never place this device on other electrical equipment.
• Keep this device away from direct sunlight, naked
amesorheat.
• Never look into the laser beam inside this device.
• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
• Do not use this apparatus near water.
• Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Use only with the cart, stand, tripod,
bracket,ortablespeciedbythe
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
• Unplug this apparatus during lightning
storms or when unused for long periods
of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
remote control:
• Install all batteries correctly, + and - as
marked on the remote control.
• Do not mix batteries (old and new or
carbonandalkaline,etc.).
• Remove batteries when the remote
control is not used for a long time.
• Batteries (battery pack or batteries
installed)shallnotbeexposedtoexcessive
heatsuchassunshine,reorthelike.
3EN
• Apparatus shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
apparatus(e.g.liquidlledobjects,lighted
candles).
• Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Caution
• Use of any controls, adjustments, or procedures other
thanthosespeciedhereinmayresultinhazardous
laser exposure or other unsafe operation.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute. The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
• Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing. To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
• Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as your
hearing adapts.
• Do not turn up the volume so high that
you can't hear what's around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Note
• The type plate is located on the back of the unit.
4EN
2 Your Mini Hi-Fi
System
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this product, you can
• enjoy audio from discs, USB storage
devices, Bluetooth enabled devices, or
other external devices;
• swap play between the dual audio sources
with the cross fader;
• listen to FM or AM radio stations;
• speak or sing with microphones through
the loudspeakers of the unit; and
• record to a USB storage device.
To enrich sound, this unit offers you these
sound effects:
• Presetequalizer(EQ)settings
• DynamicBassBoost(DBB)
• DJ effects
• NX Bass Enhancement
What's in the box
Check and identify the following box contents:
• Main unit x 1
• Remote control with 2 AAA batteries
• FM wire antenna x 1
• AM loop antenna x 1
• Short user manual
5EN
Overview of the main unit
a
• Turn on the unit or switch to standby
mode.
a
}~
€ |
{
zyxwuvt
e
f
rg
h
i
jj
k
lmno
p
q
f
e
s
dcb
b
• Open or close the disc tray.
6EN
c NFC
• Connect a NFC compatible device
through Bluetooth.
d Volume knob
• Adjust volume.
e USB A/B socket
• Connect USB mass storage devices.
f AUDIO IN A/B socket
• Connect an external audio device.
g AUX
• Select an audio source from an
external device: DVD, PC, TV or GAME
player.
h Headphone socket
• Connect a headphone.
i knob
• Adjust the headphone volume.
j A/B
• Listen from Source A/B through a
headphone.
k Bluetooth indicator
• Show Bluetooth connection status.
l Custom Equalizer knobs
• Adjust the equalizer settings for high/
middle/low frequecy ranges.
m DBB
• Turn dynamic bass enhancement on
or off.
n Sound effect keys
• Select a preset sound effect.
o Custom
• Activate custom equalizer effect.
p MIC knob
• Adjust microphone volume.
q MIC socket
• Connect a microphone.
r FLIP
• Reverse the display.
s REC
• In USB A mode, record to a USB device.
t DJ EFFECT dial
• Adjust the sound level of DJ effects.
u AUTO DJ
• In USB A mode, apply AUTO DJ
effects automatically.
v DJ EFFECT
• In CD, USB A, Bluetooth, Tuner, or Audio
in A mode, apply DJ effects manually.
w Source selector A
• Select an audio source: CD, USB A,
Bluetooth, Tuner, or Audio in A.
x NX Bass
• Turn on NX Bass effect.
y Source selector B
• Select an audio source: USB B or
AUDIO IN B.
z
• Enable or diable the speaker lighting
effect.
• Turn demo mode on or off.
{ Display panel
• Show current status.
| Control play panel (B)
• Control play for Source B modes
(including USB B mode and Audio in
Bmode).
} (B)
• In USB B mode, stop play.
~ CROSS FADER
• Adjust the channel balance between
Source A and Source B during
playback.
(A)
• In Disc or USB A mode, stop play.
• In Disc or USB A mode, erase
programmed list.
• Exit the recording process.
• In tuner mode, switch between FM and
AM bands.
7EN
€ Control play panel (A)
• Control play for Source A modes
(including CD, USB A, Bluetooth, Tuner,
andAudioinAmodes).
Overview of the remote
control
a
• Turn on the unit or switch to standby
mode.
b Source selection keys
• Select an audio source.
c USB RECORD
• In USB A mode, record to a USB
device.
d AUTO DJ
• In USB A mode, apply AUTO DJ effect
automatically.
e ALB/PRESET+/-
• In Disc or USB A mode, skip to the
previous or next album.
• In tuner mode, select a preset radio
station.
f MUTE
• Mute or resume sound.
a
d
e
f
g
hi
j
k
l
m
n
o
p
q
r
s
c
b
g DBB
• Turn dynamic bass enhancement on
or off.
h EQ
• Selectapresetequalizer(EQ)setting.
i USB B
• In USB B mode, start or pause play.
j USB BMODE
• InUSBBmode,repeatorshufeplay.
k VOL +/-
• Adjust volume.
l
• In Disc or USB A mode, stop playing.
• In Disc or USB A mode, erase
programmed list.
• Exit the recording process.
m LIGHT
• Enable or diable the speaker lighting
effect.
n /
• In tuner mode, tune to radio stations.
• In Disc or USB A mode, search within
a track.
o /
• In Disc, USB A, or Bluetooth mode,
skip to the previous or next track.
p
• In Disc, USB A, or Bluetooth mode,
start or pause play.
q USB DELETE
• InUSBAmode,deleteaudioles
stored on a USB storage device.
r MODE
• In Disc or USB A mode, select a repeat
play mode.
• In Disc or USB A mode, play tracks
randomly.
s PROG
• In Disc or USB A mode, program
tracks.
• In tuner mode, program radio stations.
8EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Note
• Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent
type.
• Batteries contain chemical substances, so they should
be disposed of properly.
1 Open the battery compartment.
2 Insert two AAA batteries with correct
polarity(+/-)asindicated.
3 Close the battery compartment.
Connect
Connect FM antenna
Note
• For better reception, fully extend and adjust the
position of the FM antenna.
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
Connect AM antenna
Note
• For better reception, adjust the position of the AM
antenna.
1 Assemble the AM loop antenna.
9EN
2 Connect the AM loop antenna to the AM
jack on the back of the main unit.
Connect power
Caution
• Risk of product damage! Make sure that you have
selected the power supply voltage that corresponds to
your local power supply.
• Risk of electric shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
Note
• Before connecting to AC power, make sure that you
have completed all other connections.
1 Adjust the voltage selector on the back of
the main unit to match your local power
supply.
2 Connect the AC power plug to the power
outlet.
Turn on
Press .
» The unit switches to the last selected
source.
Switch to standby mode
Press again to switch the unit to standby
mode.
» The button lights up red.
Turn demo mode on or off
In standby mode, press and hold for more
than 5 seconds to turn demo mode on or off.
» When the demo mode is activated,
the color of the speaker box changes
randomly and constantly.
10 EN
4 Play
Play from a disc or USB
Play disc
Note
• Make sure that the disc contains playable audio contents.
1 Slide CROSS FADER to the far left.
2 Press CD to select the disc source.
3 Press on the main unit to open the disc
tr ay.
4 Load a disc on the disc tray, with the
printed side facing up.
5 Press on the main unit to close the disc
tr ay.
• To start, pause, or resume play, press
.
• To stop play, press .
• To select another track, press or .
• To select an album, press ALB/PRESET+/-.
• To search within a track, press and
hold or , then release to resume
normal play.
Play from a USB A device
Note
• Make sure that the USB device contains playable audio
contents in supported formats.
1 Slide CROSS FADER to the far left.
2 Insert the USB plug of the device into the
USB A socket.
3 Press USB A to select the USB A source.
4 Press ALB/PRESET+/- to select an album.
5 Press or toselectanaudiole.
6 Press to start play.
• To pause or resume play, press .
• To stop play, press .
• Tosearchwithinanaudiole,press
and hold or , then release to
resume normal play.
Delete from a USB device
1 In USB A mode, press to stop music
playback.
2 Press or toselectanaudiole.
• To delete an audio folder, press ALB/
PRESET+/- to select an audio folder,
then press or toselectale.
3 Press USB DELETE repeatedly to select:
• [DEL FILE](Deletele):Delete
currentaudiole.
• [DEL DIR](Deletedirectory):Delete
current audio folder.
• [FORMAT](Format):Deletealllesin
the USB device.
11EN
4 Press toconrmtheselection.
» Aconrmationmessageisdisplayed.
• To cancel, press .
Note
• The function is not available in USB B mode.
Caution
• If [FORMAT]isselected,allles(includingnon-audio
les)storedintheUSBdevicewillbeerased.
Record to a USB device
AudioCDtracks,MP3les,radio,andaudio
from external devices are recorded in .mp3
format.
ThersttimeyourecordtoaUSBdevice,
a folder is automatically created on the USB
device. Each time you record to a USB device,
therecordedlesarestoredinasubfolder
of this folder. Files and subfolders are named
numerically in the order in which they are
created.
1 Connect a USB device to A socket.
2 Prepare the source to record from.
• Disc: Select the CD source and load
a disc, then select a track to start
recording.
• Radio: Select the TUNER source, then
tune to a radio station.
• USB B: Select the USB B source, then
connectandselectanaudioletoplay.
3 Press USB RECORD to start recording.
• For Disc mode, press USB RECORD
repeatedly to select:
A [REC ONE](recordone):therstor
current track is recorded.
B [REC ALL](recordall):alltracksorthe
remaining tracks are recorded.
» Play starts automatically from the
beginning of the disc or the selected
track, and the recording starts.
• To stop recording, press .
Note
• If the USB device does not have enough memory to
storetheaudioles,amessageaboutafullmemoryis
displayed.
• This function is not available in "USB B" and "Mix sound"
mode.
• This function is not available when AUTO DJ or DJ
EFFECT effects are applied.
Play from a USB B device
1 Slide CROSS FADER to the far right.
2 Rotate the source selector on the main
unit to select the USB B source.
3 Insert the USB plug of the device into the
USB B socket.
4 Usethecontrolplaypanel(B)onthetop
panel of the main unit to control play.
• To start, pause, or resume play, press
.
• To select an album, press or .
• Toselectanaudiole,press or .
• To stop play, press (B).
• Tosearchwithinanaudiole,press
and hold or , then release to
resume normal play.
Play options
Repeat and random play
1 In Disc/USB A mode, press MODE
repeatedly (or in USB B mode, press USB
B MODE) to select a play mode.
• [RPT ONE](repeatone):playthe
current track repeatedly.
• [RPT ALL] (repeatall):playalltracks
repeatedly.
• [RANDOM] (random):playalltracks
randomly.
2 To return to normal play, press MODE (or
USB B MODE) repeatedly to select [OFF]
(off).
12 EN
Note
• Shufeplaycannotbeselectedwhenyouplaythe
programmed tracks.
Program tracks
You can program a maximum of 20 tracks.
1 In Disc or USB A mode, press to stop
playing.
2 Press PROG to activate the program
mode.
» Anumberashesonthescreen.
3 For MP3 tracks, press ALB/PRESET+/- to
select an album.
4 Press or to select a track number,
then press PROGtoconrmselection.
5 Repeat steps 3 to 4 to program other tracks.
6 Press to play the programmed track.
• To erase the program, press twice.
Note
• The function is not available in USB B mode.
Play audio through Bluetooth
The product can stream music from your
Bluetooth device to the system through
Bluetooth.
Connect a device
Note
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• The operational range between this product and a
Bluetoothdeviceisapproximately10meters(30feet).
• Any obstacle between this product and a Bluetooth
device can reduce the operational range. Keep away
from any other electronic device that may cause
interference.
Option 1: Connect a device through
NFC
NearFieldCommunication(NFC)isa
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1 Enable NFC on your Bluetooth device
(refertoitsusermanual).
2 Press Bluetooth to select BT source.
» [BT] (BT)isdisplayed,then[SEARCH]
(search)beginstoash.
» TheBluetoothindicatorashes.
3 Tap the NFC tag on the top of the product
with the NFC area of your Bluetooth
device.
4 Follow the on-screen instructions to
complete the pairing and connection.
» After successful connection, the
Bluetooth indicator turns solid blue,
and the product beeps twice.
Option 2: Connect a device manually
1 Slide CROSS FADER to the far left.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
thedevice).
3 Press Bluetooth repeatedly to select BT
source.
» [BT] (BT)isdisplayed,then[SEARCH]
(search)beginstoash.
» TheBluetoothindicatorashes.
13EN
4 Select [PHILIPS NTX600] displayed on
your device for pairing. If necessary, input
“0000” as the pairing password.
» After successful connection, the
Bluetooth indicator turns solid blue,
and the product beeps twice.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to this product.
Disconnect a device
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The product beeps twice.
Note
• Before connecting another Bluetooth device, disconnect
thecurrentdevicerst.
Play from an external device
You can play audio from an external device
through the speakers of this product.
Play from an MP3 player
AUD-A
1 Slide CROSS FADER to the far left.
2 Press AUDIO A to select the [AUD-A]
source.
3 Connect an audio input cable (not
supplied)witha3.5mmconnectoron
both ends to:
• the AUDIO IN A socket on the unit,
and
• the headphone socket on the MP3
player.
4 Play audio on the MP3 player (refer to its
usermanual).
Tip
• If the MP3 player is connected to the AUDIO IN B
socket, rotate the source selector on the main unit to
select the [AUD-B] source.
Play from other audio device
You can connect a PC or other audio devices
to this unit.
1 Press AUX repeatedly to cycle through
GAME, PC IN, TV and DVD sources.
2 Connect the white and red audio cables
(notsupplied)to:
• the AUX sockets on the back of the
main unit, and
• the headphone socket on a PC, or the
AUDIO OUT socket on an external
device.
DVD
L
R
14 EN
3 Play audio on the device (refer to the user
manualofthedevice).
Tip
• To exit AUX mode and enjoy audio from other sources,
press AUX repeatedly to select [AUX OFF].
15EN
5 Listen to radio
Tune to a radio station
Tip
• Keep the unit away from other electronic devices to
avoid radio interference.
• For better reception, fully extend and adjust the
position of the antenna.
1 Slide CROSS FADER to the far left.
2 Press TUNER on the remote control, or
A on the main unit repeatedly to select FM
or AM tuner.
3 Press and hold or for 2 seconds.
» [SEARCH] (search)isdisplayed.
» The radio tunes to a station with
strong signal automatically .
4 Repeat step 3 to tune to more stations.
• To tune to a station manually, press
or repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
• You can program a maximum of 30 FM and 10 AM
radio stations.
In tuner mode, press and hold PROG for 2
seconds to activate automatic program mode.
» [AUTO](auto)isdisplayed.
» The unit stores radio stations with
sufcientsignalstrengthautomatically.
» After all available radio stations are
stored,therststoredradiostationis
broadcast automatically.
Program radio stations
manually
Note
• You can program a maximum of 30 FM and 10 AM
radio stations.
1 Tune to a radio station.
2 Press PROG to activate the program
mode.
» A position number is displayed.
3 Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROGtoconrm.
4 Repeat steps 1-3 to program other
stations.
Tip
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press ALB/PRESET+/- to select
a preset number.
Change AM tuning grid
In some countries, the AM radio frequency step
between adjacent channels is 10 kHz or 9 kHz.
• In AM tuner mode, press and hold for
morethanveseconds.
» All preset stations are erased and need
to be re-programmed.
16 EN
6 Adjust volume
level and sound
effect
Adjust volume level
During play, press VOL +/- to increase or
decrease volume.
Mute sound
During play, press MUTE to mute or unmute
sound.
Apply AUTO DJ effect
The AUTO DJ function adds various sound and
playback effects to your music automatically.
• To apply AUTO DJ effects, press AUTO DJ
repeatedly to select between:
• [METAL](Metal),and
• [PARTY](party)
• To turn off the AUTO DJ effects, press
AUTO DJ repeatedly to select [OFF]
(Off).
• To adjust the occurrence frequency and
sound level of the added effects, rotate the
DJ EFFECT dial.
Note
• These effects are added by the application automatically
and randomly.
• The function is only available in USB A mode.
Apply DJ effects manually
You can also add the preset DJ effects by
yourself.
• Press DJ EFFECT repeatedly to select an
effect:
• [SCRATCH](scratch)
• [REVERB](reverb)
• [BEAT BOX](beatbox)
• [YEAH](yeah)
• To turn off the DJ effects, press DJ EFFECT
repeatedly to select [OFF](off).
• To adjust the sound level of the added
effects, rotate the DJ EFFECT dial.
Note
• The function is not available in USB B mode and Audio
in B mode.
Select a preset sound effect
Thepresetequalizer(EQ)featureenablesyou
to enjoy special sound effects.
• During play, press EQ repeatedly to select:
• [ROCK](rock)
• [POP](pop)
• [HIP-HOP](hip-hop)
• [REGUETON](regueton)
• [PARTY](party)
Enhance bass
ThebestDynamicBassEnhancement(DBB)
setting is generated automatically for each
DSC selection. You can manually select the
DBB setting that best suits your listening
environment.
• During play, press DBB repeatedly to
select:
• DBB 1
• DBB 2
• DBB 3
• DBB OFF
17EN
Apply NX Bass effect
NX Bass effect adds clean and lively
characteristics to your music with rather low
background noise.
• During play, press NX Bass. Then the
sound will change in 3 stages:
• Stage 1: The sound volume increases to
a higher level and stays at this level for
5 seconds.
» [FIRING](ring)isdisplayed.
• Stage 2: The sound volume gradually
decreases to its original level in 10
seconds.
» [DISCHARGE](discharge)isdisplayed.
• Stage 3: The sound volume keeps at
normal level for 40 seconds.
• If you press NX Bass again,
[RECHARGE](recharge)isdisplayed.
Adjust equalizer settings
Custom Equalizer lets you increase or decrease
thegainforspecicfrequencyranges,andadjust
audio output to your own preferences.
1 Press CUSTOM on the main unit.
2 Switch the Custom Equalizer knobs to
adjust the equalizer settings for each of the
three frequency ranges.
18 EN
7 Other features
Mix sound
You can play from Source A (Disc/USB A/
Bluetooth/Tuner/AudioinAmode)andfrom
Source B(USBB/AudioinBmode)atthe
same time.
1 Play from Source A.
• Disc: Select the CD source, and play a
track in the loaded disc.
• Tuner: Select the Tuner source, and
tune to a radio station.
• Audio in A: Select the Audio in
A source, and play audio on the
connected external device.
• USB A: Select the USB A source, and
play audio on the connected USB A
device.
• Bluetooth: Select the Bluetooth source,
connect a Bluetooth device, and then
play audio on the device.
2 Play from Source B.
• Audio in B: Select the Audio in B
source, and then play audio on the
connected external device.
• USB B: Select the USB B source, and
then play audio on the connected USB
B device.
3 Use the CROSS FADER control to adjust
the output balance between the two tracks
played from Source A and Source B.
Speak or sing with a
microphone
With this unit, you can speak or sing to a music
source with a microphone.
1 Turn the MIC volume knob to the
minimum level.
2 Connectamicrophone(notsupplied)to
the MIC socket on the top panel.
3 Press CD, TUNER, USB A, AUDIO A, or
AUX to select a source, and start play.
4 Sing or speak through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the microphone,
turn the MIC volume knob.
Note
• The MIC input is designed for dynamic coil microphones
with750Ω+/-30%impedance.
Turn the decorative light on
or off
• In power-on mode, press LIGHT
repeatedly to adjust the decoration light
around the loudspeakers, or turn the light
off.
Reverse the display
• During play, press FLIP to reverse the
display.
Listen through a headphone
Note
• When you listen through a headphone, the loudspeaker
cannot be muted.
1 Plug a headphone into the socket on the
top panel of the main unit.
2 Press A/B to select an audio source to
listen from: Source A or Source B.
3 Turn the volume knob to adjust the
headphone volume.
19EN
8 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Total Output Power 4X600W,30%THD
Frequency Response 60 -16000 Hz, ±3 dB
Signal to Noise Ratio >65 dBA
Audio Input 2VRMSRin≥22kohm
Disc
Laser type Semiconductor
Disc diameter 12cm/8cm
Support disc CD-DA, CD-R, CD-RW,
MP3-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion
<0.8%(1kHz)
Frequency Response 4Hz-20kHz(44.1kHz)
S/N Ratio >65 dBA
Speakers
Speaker
Impedance
6 ohm
Speaker Driver Woofer: 8”; Midrange: 4”;
Tweeter: 0.5” dome
Sensitivity 89±3dB/m/W
Tuner
Tuning Range FM: 87.5 - 108 MHz;
AM: 531 - 1602 kHz
(9KHz);530-1700
KHz(10KHz)
Tuning Grid 100KHz(FM);9KHz/
10KHz(AM)
Number of Presets 30 FM, 10 AM
- Mono, 26dB S/N
Ratio
<22 dBf
Search Selectivity <35 dBf
Total Harmonic
Distortion
<2%
Signal to Noise Ratio >45 dB
Bluetooth
Bluetooth Version V2.1+EDR
Bluetooth Frequency
Band
2.4GHz ~ 2.48GHz
ISM Band
BluetoothProle A2DP, AVRCP 1.4
Range 10m(Freespace)
General information
AC Power 110 -127V/220 -
240V~, 50/60Hz
Operation power
consumption
110 W
Standby power
consumption
30 W
USB Direct Version 2.0 HS, 5V,
500mA
Headphone Output 5.0mW2x16Ω
Dimensions
-MainUnit(WxHxD)
358 x 1091 x 471
mm
Weight 27.4 kg
20 EN
USB playability information
Compatible USB devices:
• USBashmemory(USB2.0)
• USBashplayers(USB2.0)
• memory cards (requires an additional
cardreadertoworkwiththisunit)
Supported formats:
• USBormemoryleformatFAT12,
FAT16,FAT32(sectorsize:512bytes)
• MP3bitrate(datarate):32-320Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID3 tag v1.2 or later
• File name in Unicode UTF8 (maximum
length:128bytes)
Unsupported formats:
• Empty albums: an empty album is an
albumthatdoesnotcontainMP3les,
and is not be shown in the display.
• Unsupportedleformatsareskipped.
Forexample,Worddocuments(.doc)
orMP3leswithextension.dlfare
ignored and not played.
• AAC,WAV,PCMaudioles
• WMAles
Supported MP3 disc formats
• ISO9660, Joliet
• Maximum title number: 999 (depending on
lenamelength)
• Maximum album number: 99
• Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
• SupportedBit-rates:32-320(kbps),
variable bit rates
• ID3 tag v1.2 or later
• Directory nesting up to a maximum of 8
levels
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
• Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
21EN
9 Troubleshooting
Caution
• Never remove the casing of this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
thePhilipswebsite(www.philips.com/support).
When you contact Philips, ensure that your
unit is nearby and the model number and serial
number are available.
General
No power
•Make sure that the AC power plug of the
unit is connected properly.
•Make sure that there is power at the AC
outlet.
No sound or poor sound
•Adjust the volume.
•Check that the speakers are connected
correctly.
•Check if speakers are muted. Press MUTE
to restore sound.
No response after pressing some source keys
•Make sure that the product is not in
standby mode.
•Check if the product is in AUX mode. If
yes, press AUXrepeatedly to exit the AUX
moderst,thentryagain.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
•Beforeyoupressanyfunctionbutton,rst
select the correct source with the remote
control instead of the main unit.
•Reduce the distance between the remote
control and the unit.
•Insert the batteries with their polarities
(+/–signs)alignedasindicated.
•Replace the batteries.
•Aim the remote control directly at the
sensor on the front of the main unit.
No disc detected
•Insert a disc.
•Check if the disc is inserted upside down.
•Wait until the moisture condensation at
the lens has cleared.
•Replace or clean the disc.
•UseanalizedCDorcorrectformatdisc.
Cannot display some les in USB device
•ThenumberoffoldersorlesintheUSB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•Theformatsoftheselesarenot
supported.
USB device not supported
•The USB device is incompatible with the
unit. Try another one.
Cannot apply sound effects when playing from
a USB B device.
•USB B mode does not support DBB, DSC,
DJ EFFECT or AUTO DJ effects.
Cannot delete les from a USB B device.
•USB B mode does not support USB
Delete function.
Poor radio reception
•Increase the distance between the unit and
other electrical appliances.
•Adjust the position of the antenna for
better reception.
22 EN
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
•The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
•This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
•The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
•For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.
23EN
10 Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
Gibson Innovations may void the user’s
authority to operate the equipment.
Care of the environment
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Do not throw away the product with the
normal household waste at the end of its life,
buthanditinatanofcialcollectionpointor
recycling. By doing this, you help to preserve the
environment.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separateintothreematerials:cardboard(box),
polystyrenefoam(buffer)andpolyethylene
(bags,protectivefoamsheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
Innovations Limited is under license. Other
trademarks and trade names are those of their
respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Specifications are subject to change without notice.
2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and
Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used
under license from Koninklijke Philips N.V.
NTX600_77_UM_V1.0