Table of Contents
- Contents
- 1 Important safety instructions
- 2 Your SE888
- 3 Get started
- 4 Bluetooth
- 5 Calls
- Make a call
- End a call
- Answer a call
- Adjust the volume during a call
- Mute the microphone
- Turn the speaker on or off
- Make a second call
- Answer a second call
- Toggle between two calls on the handset and base station
- Toggle between two calls on the land line and Bluetooth line
- Make a conference call with external callers
- Make a conference call on the land line and Bluetooth line
- 6 Intercom and conference calls
- 7 Text and numbers
- 8 Phonebook
- 9 Call log
- 10 Redial list
- 11 Phone settings
- 12 Alarm clock
- 13 Display settings
- 14 Sound settings
- 15 Services
- Access the services menu
- Auto conference
- Manage the carrier code
- Manage the area code
- Auto prefix
- Network type
- Select the recall duration
- Dial mode
- First ring
- Auto clock
- Register the handsets
- Unregister the handsets
- Call services
- Call forward
- Activate/Deactivate call forward
- Edit the activation/deactivation code
- Call return
- Call the return service centre
- Edit the call return service centre number
- Call-back service
- Cancel the call-back service
- Edit the cancel call-back service number
- Hide your identity
- Activate ID withheld
- Edit the ID withheld code
- Restore default settings
- 16 Baby monitor
- 17 Telephone answering machine
- Turn on/off the answering machine
- Set the answering machine language
- Set the answer mode
- Announcements
- Incoming messages (ICM)
- Listen to the incoming messages
- From the base
- From the handset
- Delete an incoming message
- From the base
- From the handset
- Delete all old incoming messages
- From the base
- From the handset
- Call screening
- From the base
- Set the sound quality of the message
- Set the ring delay
- Remote access
- Change the PIN code
- Activate/deactivate the remote access
- Access the answering machine remotely
- Remote access commands
- 18 Default settings
- 19 Technical data
- 20 Notice
- 21 Frequently asked questions
Philips SE8881B/BR User Manual
Displayed below is the user manual for SE8881B/BR by Philips which is a product in the Telephones category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
SE888
EN User manual
3EN
4
Call from the redial list 21
Call from the phonebook 21
Call from the call log 21
End a call 21
Answer a call 21
Divert the incoming call to the answering
machine 22
Turn off the ringer for all incoming calls 22
Adjust the volume during a call 22
Mute the microphone 22
Turn the speaker on or off 22
Make a second call 22
Answer a second call 22
Toggle between two calls on the handset
and base station 22
Toggle between two calls on the land line
and Bluetooth line 23
Make a conference call with external callers 23
Make a conference call on the land line and
Bluetooth line 23
6 Intercom and conference calls 24
Make a call to another handset 24
While you are on the phone 24
Toggle between calls 24
Transfer a call 24
Make a conference call 24
During an external call 24
During the conference call 25
7 Text and numbers 26
Enter text and numbers 26
Switch between the upper case and lower
case 28
8 Phonebook 29
Access the phonebook directories 29
Direct access memory 29
View the phonebook 29
Download the phonebook from the mobile
phone or computer 29
Search a record 29
Scroll the contact list 29
Enter the rst character of a contact 30
Call from the phonebook 30
Access the phonebook during a call 30
Add a record 30
Contents
1 Important safety instructions 7
2 Your SE888 9
What is in the box 9
Overview of the phone 10
Overview of the base station 11
Main menu icons 12
Display icons 13
3 Get started 14
Connect the base station and charger 14
Install the handset 14
Congure your phone (country dependent) 15
Select the country 15
Set the date and time 15
Set the date and time format 15
Charge the handset 15
Check the battery level 16
What is standby mode? 16
Check the signal strength 16
4 Bluetooth 17
Rename your device 17
Pair SE888 17
Pair SE888 with your mobile phones 17
Pair SE888 with your computer 17
Synchronize the phonebook and call log 18
Download the phonebook and update the
call log from the mobile phones 18
Download the phonebook from the
computer 18
Manage the devices list 18
Connect/Disconnect the device 18
Rename the device 19
Delete a device/Delete all devices on the list 19
Change the PIN code 19
5 Calls 20
Make a call 20
Quick call 20
Dial before you call 20
Redial the most recent number 20
EN
5
Set the sound prole 41
15 Services 42
Access the services menu 42
Auto conference 42
Activate/Deactivate auto conference 42
Manage the carrier code 42
Activate auto removal of the carrier code 42
Deactivate auto removal of the area code 42
Manage the area code 43
Activate auto removal of the area code 43
Deactivate auto removal of the area code 43
Auto prex 43
Set auto prex 43
Network type 44
Select the recall duration 44
Dial mode 44
Set the dial mode 44
First ring 44
Turn the rst ring on/off 44
Auto clock 45
Register the handsets 45
Auto registration 45
Manual registration 45
Unregister the handsets 46
Call services 46
Call forward 46
Activate/Deactivate call forward 46
Edit the activation/deactivation code 46
Call return 47
Call the return service centre 47
Edit the call return service centre number 47
Call-back service 47
Cancel the call-back service 47
Edit the cancel call-back service number 47
Hide your identity 47
Activate ID withheld 47
Edit the ID withheld code 47
Restore default settings 47
16 Baby monitor 49
Activate/Deactivate the baby monitor 49
Send an alert 49
Send to other handsets 49
Send to an external line 49
Set the baby cry level 49
Edit a record 30
Set the melody 31
Delete a record 31
Delete all records 31
9 Call log 32
Access the call records 32
View the call records 32
Download the phonebook from the mobile
phone or computer 32
Return a call 32
Save a call record to the phonebook 33
Delete a call record 33
Delete all call records 33
10 Redial list 34
Access the redial list 34
Redial a call 34
Save a redial record to the phonebook 34
Delete a redial record 34
Delete all redial records 35
11 Phone settings 36
Access the phone settings menu 36
Set the date and time 36
ECO mode 36
Name the handset 36
Set the display language 36
Line settings 37
12 Alarm clock 38
Access the Alarm menu 38
Set the alarm 38
13 Display settings 39
Access the Display menu 39
Set the display 39
14 Sound settings 40
Access the sounds menu 40
Set the handset’s ringtone volume 40
Set the handset’s ringtone 40
Set the silent mode 40
Set the key tone 40
Set the docking tone 41
EN
6
17 Telephone answering machine 50
Turn on/off the answering machine 50
Through the handset 50
Through the base 50
Set the answering machine language 50
Set the answer mode 50
Announcements 51
Record an announcement 51
Listen to the announcement 51
Restore the default announcement 51
Incoming messages (ICM) 51
Listen to the incoming messages 51
From the base 52
From the handset 52
Delete an incoming message 52
From the base 52
From the handset 52
Delete all old incoming messages 52
From the base 52
From the handset 52
Call screening 52
From the base 52
Set the sound quality of the message 52
Set the ring delay 53
Remote access 53
Change the PIN code 53
Activate/deactivate the remote access 53
Access the answering machine remotely 53
Remote access commands 54
18 Default settings 55
19 Technical data 56
20 Notice 57
Declaration of conformity 57
Use GAP standard compliance 57
Compliance with EMF 57
Disposal of your old product and batteries 57
Trademarks 58
21 Frequently asked questions 59
EN
7
To avoid damage or malfunction
Caution
•Use only the power supply listed in the user
instructions.
•Use only the batteries listed in the user instructions.
•Do not allow the charging contacts or the battery to
come into contact with metal objects.
•Do not open the handset, base station or charger as
you could be exposed to high voltages.
•Do not allow the product to come into contact with
liquids.
•Risk of explosion if battery is replaced by an incorrect
type.
•Dispose of used batteries according to the instructions.
•Always use the cables provided with the product.
•For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
•Handsfree activation could suddenly increase the
volume in the earpiece to a very high level: make sure
the handset is not too close to your ear.
•This equipment is not designed to make emergency
calls when the power fails. An alternative has to be
made available to allow emergency calls.
•Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
•Do not drop your phone or allow objects to fall on
your phone.
•Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
•Do not use the product in places where there are
explosive hazards.
•Do not let small metal objects come into contact with
the product. This can deteriorate audio quality and
damage the product.
•Active mobile phones in the vicinity may cause
interference.
•Metallic objects may be retained if placed near or on
the handset receiver.
1 Important safety
instructions
Power requirements
• This product requires an electrical supply
of 100-240 volts AC. In case of power
failure, the communication can be lost.
• The voltage on the network is classied
as TNV-3 (Telecommunication Network
Voltages), as dened in the standard EN
60950.
Warning
•The Electrical network is classied as hazardous. The
only way to power down the charger is to unplug the
power supply from the electrical outlet. Ensure that the
electrical outlet is always easily accessible.
EN
8
When using the phone as a baby monitor
Caution
•Children should be supervised to ensure that they do
not play with the appliance.
•Make sure the baby unit and the cord are always out of
reach of the baby (at least 1 metre/3 feet away).
•Keep the parent unit at least 1.5 metres/5 feet away
from the baby unit to prevent acoustic feedback.
•Never place the baby unit inside the baby’s bed or
playpen.
•Never cover the parent unit and the baby unit with
anything (e.g. a towel or blanket). Always make sure the
cooling vents of the baby unit are free.
•Take every precaution to make sure that your baby can
sleep safely.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
•If you place the parent unit next to a transmitter or
other DECT appliance (e.g. a DECT telephone or
wireless router for the internet), the connection with
the baby unit may be lost. Move the baby monitor
further away from the other wireless appliances until
the connection is restored.
•This baby monitor is intended as an aid. It is not a
substitute for responsible and proper adult supervision
and should not be used as such.
About operating and storage temperatures
• Operate in a place where temperature is
always between 0°C to +35°C (32°F to
95°F).
• Store in a place where temperature is
always between -20°C and +45°C (-4° F
to 113° F).
• Battery life may be shorter in low
temperature conditions.
EN
9
Power adapter**
Line cord*
Warranty
Quick start guide
CD rom
Note
•* In some countries, you have to connect the line
adapter into the line cord, then plug the line cord into
the telephone socket.
2 Your SE888
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
What is in the box
Base station
Handset**
Charger**
EN
10
1 Earpiece
2 - Delete text or digits.
- Cancel operation.
- Enter the redial list.
3 - End the call.
- Exit the menu/
operation.
4 - Scroll up on the
menu.
- Increase the
earpiece/speaker
volume.
- Enter the
phonebook.
- Scroll down on the
menu.
- Decrease the
earpiece/speaker
volume.
- Enter the call log.
/ - Move the cursor to
the left/right in editing
mode.
5 - Make a predial call.
- Press and hold to
enter a pause
- Switch to upper/
lower case during
editing.
6 - Mute/unmute the
microphone.
7 Microphone
8 - It is displayed when
the speaker phone
is on.
- Make and receive
calls through the
speaker.
9*- Set the dial mode
(pulse mode or
temporary tone
mode).
10 - Make and receive
calls.
Note
•** In multi-handset packs, there are additional handsets,
chargers, and power adapters.
Overview of the phone
EN
11
1 - Find handsets
- Enter registration
mode
2MENU - Enter the main
menu screen.
- Turn answering
machine on/off.
3 Right soft key - Delete text or digits.
- Cancel operation.
- Select the function
displayed on the
screen directly above
the key.
- Play messages.
- Stop messages
playback.
4 - Scroll up on the
menu.
- Enter the
phonebook.
- Scroll down on the
menu.
- Enter the call log.
5 LCD display
6 Left soft key - Conrm option.
- Enter the options
menu.
- Select the function
displayed on the
screen directly above
the key.
- Delete the current
playback message.
- Press and hold
to delete all old
messages.
7 - Increase the speaker
volume.
- Decrease the
speaker volume.
8 Loudspeaker
9 /HOME - Make and receive
calls.
- End the call.
11 - Access the main
menu.
- Conrm option.
- Enter the options
menu.
- View the new
available event.
- Select the function
displayed on the
handset screen directly
above the key.
12 Loudspeaker
13 Battery door
Overview of the base station
Top view
Bottom view
EN
12
Icon Descriptions
[Phone setup] - Set the date and
time, ECO mode, handset name
and display language.
[Sounds] - Set the ring volume,
ring tone, key tone etc.
[Services] - Set the auto
conference, auto prex, network
type, recall time, auto clock, dial
mode, register/unregister handset,
call services etc.
The services are network and
country dependent.
[Alarm] - Set date and time, alarm,
alarm tone etc.
[Phonebook] - Add, edit, manage
phonebook entries etc.
[Call list] - Displays the call history
of all missed or received calls.
[Display] - Set the brightness,
screen saver etc.
[Baby monitor] - Set the alert to
other handsets and the baby cry
level.
[Answer machine] - Setup, listen
to, delete phone messages, etc.
10 /MOBILE - Make calls through
mobile phones.
11 REDIAL - Enter redial list
and dial the recent
number.
12 FLASH/CALL
WAIT
- Recall key (This
function is network-
dependent.)
13 - Press to enter a
pause.
- Switch between
lower and upper case
during text editing.
14 INTERCOM - Make an intercom
call.
- Make a conference
call.
15 - Mute/unmute the
microphone
16 *- Set the dial mode
(pulse mode or
temporary tone
mode).
17 Microphone
18 USB socket
for iPhone
charging
19 Micro USB
cable for
mobile phone
charging
Main menu icons
The following is an overview of the menu
options that are available in your SE888. For
detailed explanation of the menu options, see
the corresponding sections in this user manual.
EN
13
The Bluetooth function is
activated. Number ‘1’ indicates
mobile 1 while ‘2’ indicates mobile
2, in the active list of bluetooth
device. White color means the
device is in range or the service
is available. Gray color means
the device is added in the active
list but is out of range or not
available. Blank color means the
corresponding active list has no
device added.
It is displayed when the baby
monitor is set up.
/ It is displayed when you scroll up/
down a list/increase and decrease
the volume.
ECO The ECO mode is activated.
Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
Icon Descriptions
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging is complete.
The empty battery icon ashes
and you hear an alert tone.
The battery is low and needs
recharging.
It displays the link status between
the handset and base station. The
more bars are shown, the better
the connection is.
It ashes when there is a new
missed call.
It is steadily on when browsing the
new missed calls in call log.
The alarm is activated.
The speaker is on.
The ringer is off.
The silent mode is on but the
current time is not in the set
period.
Answering machine: it ashes
when there is a new message.
It displays when the telephone
answering machine is turned on.
It ashes when there is a new
voice message.
It remains steadily on when the
voice messages are already viewed
in the call log.
The icon is not shown when there
is no voice message.
EN
14
• the DC jack at the bottom of the
extra handset charger.
• the power socket on the wall.
4 For mobile phones with micro USB
charging, connect the micro USB cable plug
to the micro USB socket of the mobile
phone.
5 For iPhone users, connect the plug of your
USB charging cable (not supplied) to the
USB socket at the bottom of SE888.
Install the handset
The batteries are pre-installed in the handset.
Pull off the battery tape from the battery door
before charging.
3 Get started
Caution
•Make sure that you have read the safety instructions in
the “Important” section before you connect and install
your handset.
Connect the base station and
charger
Warning
•Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or underside of the phone.
•Use only the supplied power adapter to charge the
batteries.
Note
•If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
make sure that you install a DSL lter between the
telephone line cord and the power socket. The lter
prevents noise and caller ID problems caused by DSL
interference. For further information about DSL lters,
contact your DSL service provider.
•The type plate is located on the bottom of the base
station.
1 Connect each end of the power adapter
to:
• the DC jack at the bottom of the
base station;
• the power socket on the wall.
2 Connect each end of the line cord to:
• the telephone socket at the bottom
of the base station;
• the telephone socket on the wall.
3 Connect each end of the power adapter
to (for multi-handset versions only):
EN
15
3 Press the numeric buttons to enter the
date and time.
Note
•If the time is in 12-hour format, press * on the handset/
base station to select [AM] or [PM].
4 Press [OK] to conrm.
Set the date and time format
1 Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
conrm.
• On the base station, press MENU,
select [Phone setup] > [Date & time],
then press [OK] to conrm.
2 Select [Date format] or [Time format].
3 Press / on the handset or base station.
4 Select [DD/MM/YY] or [MM/DD/YY] as
the date display, and [12 Hours] or [24
Hours] as the time display. Then press
[OK] to conrm.
»The setting is saved.
Note
•The date and time format setting is country-dependent.
Charge the handset
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
»The handset starts charging.
Caution
•Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
•Use only the supplied batteries.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
Warning
•Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Congure your phone
(country dependent)
1 When using your phone for the rst time,
you see a welcome message.
2 Press [OK].
Select the country
Select your country, then press [OK] to
conrm.
»The language setting is saved.
Set the date and time
Tip
•To set the date and time later, press [Back] to skip this
setting.
1 Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
conrm.
• On the base station, select [Phone
setup], then press [OK] to conrm.
2 Select [Set date]/[Set time], then press
[OK] to conrm.
EN
16
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
and number/date and time, signal icon, and
battery icon.
Check the signal strength
It displays the link status between
the handset and base station. The
more bars are shown, the better
the connection is.
• Make sure that the handset is linked to the
base station before you make or receive
calls and carry out the functions and
features.
• If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
closer to the base station.
Note
•Charge the batteries for 8 hours before rst use.
•If the handset becomes warm when the batteries are
charging, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium, and
low).
When the handset is on the base
station/charger, the bars ash until
charging is complete.
The empty battery icon ashes.
The battery is low and needs
recharging.
If the batteries are empty, the handset turns
off. If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.
EN
17
3 Place the mobile phone close to the base
station, then press [OK] to conrm.
»The mobile phone name is displayed
on the screen.
4 On the mobile phone, select SE888 and
connect.
5 Enter the PIN code on the mobile phone,
if necessary.
Tip
•The default PIN code is 0000.
»When SE888 and the mobile phone
are paired, or is displayed on the
screen of the handset and base station.
Note
•When the Bluetooth device list is full, remove some
mobile phone names before pairing can start.
•If the name of SE888 exists in your mobile phone, you
have to remove it from your mobile phone. Then you
can do the pairing again.
•When pairing is successful, you can add the new mobile
phone name to the active list. Remove some mobile
phone names if the active list is full. See “Manage the
devices list” in this chapter for information.
Pair SE888 with your computer
Install the PC software ‘ThinkLink’ saved in the
cd rom or at http://www.philips.com/support
1 Double click on Setup.exe to start the
installation.
2 Select the display language.
3 After the installation is done, select ‘?’ and
follow the instructions to do the pairing.
4 Bluetooth
SE888 supports Bluetooth wireless technology.
You can connect it to a compatible Bluetooth
device such as a computer and mobile phone.
Then you can make and receive calls from your
mobile phone on the SE888 handset. You can
also download the phonebook and call log from
your computer or mobile phone with its base
station.
Note
•Make sure that the other Bluetooth devices with
which you establish a connection support Bluetooth
function. See the user manual of the other devices for
information.
•The Bluetooth connection is subject to interference
from obstructions such as walls or other electronic
devices.
Rename your device
The name of your phone is SE888 by default.
You can rename it in this way:
1 On the base station, press MENU.
2 Select [Bluetooth] > [Rename Me], then
press [OK] to conrm.
3 Edit the name, then press [Save] to
conrm.
Pair SE888
Pair SE888 with your mobile phones
Make sure the Bluetooth function of the mobile
phones is activated and in search status. Then
you can do the pairing in this way:
1 On the base station, press MENU.
2 Select [Bluetooth] > [Find Me].
EN
18
»The call log from the mobile phone is
updated on the base station.
Download the phonebook from the
computer
Install the PC software ‘ThinkLink’ saved in the
cd rom or at http://www.philips.com/support
1 Double click on Setup.exe to start the
installation.
2 Select the display language.
3 After the installation is done, select ‘?’ and
follow the instructions to download the
phonebook from the computer.
Manage the devices list
You can manage your Bluetooth devices list
(mobile phones/computer) in this way:
1 On the base station, press MENU and
select [Bluetooth] > [Device list], then
press [OK] to conrm.
»The Bluetooth devices list is displayed.
2 Select a Bluetooth devices, press [Option].
3 Select [Connect]/[Disconnect]/[Delete]/
[Delete all], then press [OK] to conrm.
Note
•You can see [Disconnect] in the option list only when
the Bluetooth device is connected; and [Connect] only
when the Bluetooth device is disconnected.
Connect/Disconnect the device
1 On the base station, press MENU and
select [Bluetooth] > [Device list], the
press [OK] to conrm.
»The Bluetooth devices list is displayed.
2 Select a Bluetooth device, press [Option].
3 Select [Connect]/[Disconnect], then press
[OK] to conrm.
Synchronize the phonebook
and call log
Download the phonebook and update
the call log from the mobile phones
On the base station
1 Make sure that the mobile phone is already
connected to SE888 with Bluetooth.
2 On the base station, press MENU and
select [Bluetooth] > [Mobile sync].
3 Select [Phonebook] to download the
phonebook or [Call log] to update the
call log from the mobile phone, then press
[OK] to conrm.
4 Select a mobile phone, then press [OK]
again to conrm.
»The phonebook and call log from the
mobile phone are updated on the base
station.
Note
•The call log from the mobile phone can be updated
automatically if you select [Call log mode] > [Auto] .
•After the update is complete, the new phonebook
overrides the old one.
•If there is an incoming call when phonebook/call log
update is in progress, the update is suspended and
resumes after the call ends.
On the handset
1 To update the phonebook, press to
access the phonebook menu.
2 Select your mobile phone ( or ).
3 Press [Update].
»The phonebook from the mobile
phone is updated on the base station.
1 To update the call log, press to access the
incoming call menu.
2 Select [Incoming calls].
3 Select your mobile phone ( or ).
4 Press [Update].
EN
19
»The selected Bluetooth device
is connected to/disconnect from
Bluetooth.
Rename the device
1 On the base station, press MENU.
2 Select [Bluetooth] > [Rename Me], then
press [OK] to conrm.
»The current phone name is displayed.
3 Edit the name, then press [Save] to
conrm.
»The new phone name is displayed.
Delete a device/Delete all devices on
the list
1 On the base station, press MENU and
select [Bluetooth] > [Device list] , then
press [OK] to conrm.
»The Bluetooth device list is displayed.
2 Select a Bluetooth device, press [Option].
3 Select [Delete]/[Delete all], then press
[OK] to conrm.
Note
•If you select to delete all Bluetooth devices on the list.
A conrmation message is displayed. Press [Yes] to
conrm.
Change the PIN code
1 On the base station, press MENU.
2 Select [Bluetooth] > [Change PIN], then
press [OK] to conrm.
3 Press [Clear] to remove the current PIN.
4 Enter the new PIN, then press [OK] to
conrm.
»The new PIN is saved.
EN
20
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Dial before you call
1 Dial the phone number on the handset or
base station.
• To erase a digit, press [Clear].
• To enter a pause, press and hold .
2 Press / to select the land line or
Bluetooth line ( / / ) from which you
want to make an outgoing call.
3 Then, you can either:
• press / on the handset; or
• press /HOME or /MOBILE on
the base station and select a line or
mobile phone to dial out the call.
Note
•Make sure that the Line settings are set to [Home] for
land line or [Mobile 1]/[Mobile 2] for Bluetooth line.
For information, see Line settings in the Phone settings
chapter.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Redial the most recent number
1 Press on the handset.
»The redial list is displayed and the most
recent number is selected.
2 Press [OK].
5 Calls
Note
•When the power fails, the phone cannot access
emergency services.
Tip
•Check the signal strength before you make a call or
when you are in a call. For information, see “Check the
signal strength” in the “Get started” section.
Make a call
You can make a call from the land line or
Bluetooth line through your mobile phones in
these ways:
• Quick call
• Dial before you call
• Redial the most recent number
• Call from the redial list.
• Call from the phonebook list
• Call from the call log
Quick call
1 You can make a call from the land line:
• To make a call from the land line,
press / on the handset or
• /HOMEon the base station.
Note
•Make sure that the line settings are set to [Home]
for land line. For information, see “Line settings” in the
Phone settings chapter.
2 Dial the phone number.
»The number is dialed out.
»The duration of your current call is
displayed.
EN
21
End a call
You can end a call in these ways:
• Press on the handset or /
HOME on the base station; or
• Place the handset to the base station.
Answer a call
• When there is an incoming call from the
land line, press / on the handset
or /HOME on the base station to
answer the call.
• When there is an incoming call from the
Bluetooth line, press / on the
handset or /MOBILE on the base station
to answer the call.
• When there are incoming calls from the
land line and Bluetooth line at the same
time, press / on the handset/base
station to select a call, then,
• on the handset, press / ; or
• on the base station, press /
HOME or /MOBILE to pick up one
of the calls.
Tip
•The LED indicator in the /HOME or /MOBILE
ashes to indicate if the incoming call is from a land line
or Bluetooth lines.
Note
•The caller ID service is available if you have registered
to the caller ID service with your service provider.
Tip
•When you miss a call, a notication message appears.
»The most recent number is then dialed
out.
Call from the redial list
You can make a call from the redial list.
Tip
•For information, see “Redial a call” in the “Redial list”
section.
Call from the phonebook
You can make a call from the phonebook list.
Tip
•For information, see “Call from the phonebook” in the
“Phonebook” section.
Call from the call log
You can return a call from the received or
missed call log.
Tip
•For information, see “Return a call” in the Call log
section.
Note
•The talk time of your current call is displayed in the
call timer.
Note
•If you hear warning tones, the handset is almost out
of battery or the handset is out of range. Charge the
battery or move the handset nearer to the base station.
EN
22
1 You can make a second call in these ways:
• Press on the handset or FLASH/
CALL WAIT on the base station
during a call.
• The rst call is put on hold.
• Press [Option] and select [Start 2nd
call], then press [OK] to conrm.
• The current call is put on hold.
2 Dial the second number.
»The number displayed on the screen is
dialed out.
Tip
•For information of how to make a call through the land
line or the Bluetooth line, see the section on “Make a
call”.
Answer a second call
Note
•It is a country-dependent setting.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1 Press and on the handset or
FLASH/CALL WAIT and on the base
station to answer the call.
»The rst call is put on hold, and you
are now connected to the second call.
2 Press and or FLASH/CALL WAIT
and 1 on the base station to end the
current call and answer the rst call.
Toggle between two calls on
the handset and base station
You can toggle your calls on the handset or
base station in these ways:
Divert the incoming call to the
answering machine
Press on the handset or base station when
receiving a call.
Turn off the ringer for all incoming
calls
Press on the handset or base station.
»The ringer is off.
Adjust the volume during a
call
Press / on the handset or / on the
base station to change the volume during a call.
Mute the microphone
1 Press on the handset or base station
during a call.
»[Mute on] is displayed.
»The caller cannot hear you, but you
can still hear the caller’s voice.
2 Press again on the handset or base
station to unmute the microphone.
»You can now communicate with the
caller.
Turn the speaker on or off
Press on the handset.
Make a second call
Note
•This service is network-dependent.
EN
23
• Press and on the handset or
FLASH/CALL WAIT and on the base
station.
• Press [Option], select [Conference] and
then press [OK] to conrm.
»The two calls are combined and a
conference call is established.
Make a conference call on the
land line and Bluetooth line
You can make a two-line conference call
through the land line and mobile line in this way:
1 Make an outgoing call with the land line.
2 When there is an incoming from the
Bluetooth line, press [Option] , then select
a mobile phone to answer the call.
3 Press [Option] to access the menu.
»In the options menu, select to start a
conference call with the land line and
Bluetooth line.
• Press and on the handset or press
FLASH/CALL WAIT and on the base
station.
• Press [Option] and select [Switch calls],
then press [OK] again to conrm.
»The current call is put on hold, and you
are now connected to the other call.
Toggle between two calls on
the land line and Bluetooth
line
You can toggle the calls between the land line
and Bluetooth line in this way:
1 Make an outgoing call with the land line.
2 When there is an incoming call from the
Bluetooth line, press [Option], then select
a mobile phone to pick up the call.
3 Press [Option] to access the menu.
»In the options menu, select to switch
or exit the two calls from the land line
and the Bluetooth line.
Note
•For some mobile phones, when you pick up the call
from the mobile phone, the Bluetooth is disconnected.
For further information, check with the mobile phone
dealer.
Make a conference call with
external callers
Note
•This service is network-dependent. Check with the
service provider for additional charges.
When you are connected to two calls, you can
make a conference call on the handset or base
station in these ways:
EN
24
2 Select a handset number, then press [OK]
to conrm.
»Wait for the other side to answer your
call.
Toggle between calls
Press and hold * on the handset or
INTERCOM on the base station to switch
between the outside call and the intercom call.
Transfer a call
1 Press and hold * on the handset or press
INTERCOM on the base station during a
call.
»The handsets available for intercom are
displayed.
2 Select a handset number, then press [OK]
to conrm.
3 Press on the handset or /HOME
on the base station when the other side
answers your call.
»The call is now transferred to the
selected handset.
Make a conference call
A 3-way conference call is a call between you,
another handset user and outside callers. It
requires two handsets to share the same base
station.
During an external call
1 Press and hold * on the handset or press
INTERCOM on the base station to initiate
an internal call.
»The handsets available for intercom are
displayed.
»The external caller is put on hold.
6 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation among you, another
handset user and outside callers.
Make a call to another
handset
Note
•If the base station only has 2 registered handsets, press
and hold * on the handset or press INTERCOM on
the base station to make a call to another handset.
1 Press and hold * on the handset or press
INTERCOM on the base station.
»The handsets available for intercom are
displayed.
2 Select a handset, then press [OK] to
conrm.
»The selected handset rings.
»The intercom is established.
3 Press [Cancel] to cancel or end the
intercom call.
Note
•If the selected handset is occupied in a call, you hear a
busy tone.
While you are on the phone
You can go from one handset to another during
a call:
1 Press and hold * on the handset or press
INTERCOM on the base station.
»The current caller is put on hold.
EN
25
2 Select or enter a handset number, then
press [OK] to conrm.
»The selected handset rings.
3 Press on the selected handset or
INTERCOM on the base station.
»The intercom is established.
4 Press [Conf] .
»You are now in a 3-way conference
call with an external call and a selected
handset/base station.
5 Press on the handset or /HOME
on the base station to end the conference
call.
Note
•If [Services] > [Conference] is set to [Auto], press
[Conf] to join an ongoing conference with another
handset.
During the conference call
You can press and hold * on the handset or
press INTERCOM on the base station to:
• put the external call on hold and go back
to the internal call.
»The external call is put on hold.
• toggle between the external and internal
call.
• establish the conference call again.
Note
•If a handset/the base station hangs up during the
conference call, the other handset/base station remains
connected to the external call.
EN
26
Key Lower case characters (for
English/French/ German/
Italian/Turkish/Portuguese/
Spanish/Dutch/Danish/
Finnish/Norwegian/ Swedish)
0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * + - %
\ ^ ~ |
11 @ _ # = < > ( ) & € £ $ ¥
[ ] { } ¤ § …
2 a b c 2 à â æ á ã ä å ç
3d e f 3 è é ê ë Δ Φ
4g h i 4 ğ í ì ï ı Γ
5j k l 5 Λ
6 m n o 6 ñ ó ô õ ö ò
7p q r s 7 β ş Π Θ Σ
8t u v 8 ù ú ü μ
9w x y z 9 ø Ω Ξ Ψ
Key Upper case characters
(for Greek)
0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * +
- % \^ ~|
11 @ _ # = < > ( ) & £ $
¥ [ ] { } ¤ § ...
2A B Г 2 A B C Æ Å Ç
3Δ Ε Ζ 3 D E F É
4Η Θ Ι 4 G H I
5Κ Λ Μ 5 J K L
6Ν Ξ Ο 6 M N O Ñ Ö
7Π Ρ Σ 7 P Q R S
8Τ Υ Φ 8 T U V Ü
9Χ Ψ Ω 9 W X Y Z Ø
7 Text and
numbers
You can enter text and numbers for handset
name, phonebook records, and other menu
items.
Enter text and numbers
1 Press once or several times on the
alphanumeric key to enter the selected
character.
2 Press [Clear] to delete the character. Press
/ to move the cursor left and right.
Key Upper case characters (for
English/French/ German/
Italian/Turkish/Portuguese/
Spanish/Dutch/Danish/Finnish/
Norwegian/ Swedish)
0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - %
\^ ~|
11 @ _ # = < > ( ) & £ $ ¥ [
] { } ¤ § ...
2A B C 2 À Â Æ Á Ã Ä Å Ç
3D E F 3 È É Ê Ë Δ Φ
4G H I 4 Ğ Í Ï İ Γ
5J K L 5 Λ
6M N O 6 Ñ Ó Ô Õ Ö
7P Q R S 7 Ş Π Θ Σ
8T U V 8 Ù Ú Ü
9W X Y Z 9 Ø Ω Ξ Ψ
EN
27
Key Lower case characters (for
Romanian/Polish/Czech/
Hungarian/Slovakian/
Slovenian/Croatian)
0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \
^ ~ |
11 @ _ # = < > ( ) & € £ $ ¥
[ ] { } ¤ § …
2a b c 2 à â æ á ă ä å ą ć č
3d e f 3 ď đ ė ě è é ę Δ Φ
4g h i 4 í ì Γ
5j k l 5 Λ
6m n o 6 ñ ň ó ö ő ò
7p q r s 7 ř š ś Π Θ Σ ß
8t u v 8 ţ ť ù ú û ü ů ǚ ű
9w x y z 9 ý ž ƒ ø Ω Ξ Ψ
Key Upper case characters (for
Greek)
0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - %
\^ ~|
11 @ _ # = < > ( ) & £ $ ¥ [
] { } ¤ § ...
2А Б В Г Ђ Ć Č 2 A B CÆ
Ä Å Ç
3Д Е Ж З Ј Đ 3 D E F É Δ Φ
4И Й К Л Љ 4 G H I Γ
5М Н О П Њ 5 J K L Λ
6Р С Т У Ћ 6 M N O Ñ Ö
7Ф Х Ц Ч ǚ 7 P Q R S Π
Θ Σ
8Ш Щ Ъ Ы 8 T U V Ü
9Ь Э Ю Я Ž 9 W X Y Z Ø
Ω Ξ Ψ
Key Lower case characters
(for Greek)
0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * +
- % \ ^ ~ |
11 @ _ # = < > ( ) & € £
$ ¥ [ ] { } ¤ § …
2α β γ 2 a b c à æ ä å
3δ ε ζ 3 d e f è é
4η θ ι 4 g h i ì
5κ λ μ 5 j k l Λ
6ν ξ ο 6 m n o ñ ö ò
7π ρ σ ς 7 p q r s ß
8τ υ φ 8 t u v ù ü
9χ ψ ω 9 w x y z ø
Key Upper case characters (for
Romanian/Polish/Czech/
Hungarian/Slovakian/Slovenian/
Croatian)
0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - %
\^ ~|
11 @ _ # = < > ( ) & £ $ ¥ [ ]
{ } ¤ § ...
2A B C 2 Â Æ Á Ă Ä Å Ą Ç
Ć Č
3D E F 3 Ď Đ Ė Ě É Ę Δ Φ
4G H I 4 Í Î Γ
5J K L 5 Λ Ł Ĺ Ľ
6M N O 6 Ñ Ň Ń Ó Ö Ő
7P Q R S 7 Ř Ş Š Ś Π Θ Σ
8T U V 8 Ţ Ť Ú Û Ü Ů ǚ Ű
9W X Y Z 9 Ý Ž Ź Ż ſ Ø Ω
Ξ Ψ
EN
28
Key Lower case characters
(for Serbian/Bulgarian)
0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * +
- % \ ^ ~ |
11 @ _ # = < > ( ) & € £
$ ¥ [ ] { } ¤ § …
2 a b c 2 à æ ä å
3d e f 3 è é Δ Φ
4g h i 4 ì Γ
5j k l 5 Λ
6 m n o 6 ñ ö ò
7p q r s 7 Π Θ Σ ß
8 t u v 8 ù ü
9x y z 9 ø Ω Ξ Ψ
Switch between the upper
case and lower case
By default, the rst letter of each word in a
sentence is upper case and the rest is lower
case. Press to switch between the upper case
and lower case letters.
EN
29
View the phonebook
Tip
•You can view the phonebook on either the handset or
base station only.
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this chapter).
2 Press / on the handset or base station
to scroll through the phonebook entries.
3 Select a contact and view the detailed
information.
Download the phonebook
from the mobile phone or
computer
Tip
•For information, see”Synchronize the phonebook and
call log” in the “Bluetooth” section.
Search a record
You can search the phonebook records in these
ways:
• Scroll the contact list.
• Enter the rst character of the contact.
Scroll the contact list
You can view the phonebook by scrolling the
contact list.
Tip
•See “View the phonebook” in the previous paragraph
in this chapter.
8 Phonebook
This phone has a phonebook that stores up to
200 records. Each record can have a name up
to 14 characters long and a number up to 24
digits long.
You can access the phonebook from the
handset or base station. The base station can
maintain multiple phonebook directories and
can transfer the phonebook from each mobile
phone and computer. You can access any
phonebook entry and use that entry to make a
call on the land line or either of the two mobile
phones.
Access the phonebook
directories
On the handset
Press or select [Menu] > > [OK] to access
the phonebook directories.
On the base station
Press .
Direct access memory
You have 2 direct-access memories (keys 1 and
2) on the home phonebook directory. To dial
the saved phone number automatically, press
and hold on the keys in standby mode.
Depending on your country, Keys 1 and 2 are
preset to [1_voicemail] (voice mail number)
and [2_info svc] (information service number)
of your network operator respectively.
EN
30
Add a record
Note
•If your phonebook memory is full, a notication
message is displayed on the handset. Delete some
records to add new ones.
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this section).
2 Select [Option] > [Add new], then press
[OK] to conrm.
3 Enter the name, then press [OK] to
conrm.
4 Enter the number, then press [Save] to
conrm
»Your new record is saved.
Tip
•Press and hold to insert a pause.
Note
•The phonebook only saves new number entries.
Tip
•For information on how to edit the numbers and name,
see the chapter on “Text and numbers”.
Edit a record
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories in the previous
paragraph in this chapter).
Enter the rst character of a contact
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this chapter).
2 Press the alphanumerical key that matches
the character.
»The rst entry that starts with this
character is displayed.
Call from the phonebook
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this chapter).
2 Select a contact.
3 You can make the call in either way:
• Press or on the handset; or
• Press /HOME or /MOBILE on
the base station.
4 Then select a line to make the call.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Access the phonebook during
a call
1 Press [Option] and select [Phonebook].
2 Press [OK] to conrm.
3 Select a contact, then press [OK] to
conrm.
»The number can be viewed.
EN
31
2 Select a contact, then select [Option] >
[Delete]. Press [OK] to conrm.
»A conrmation request is displayed on
the handset.
3 Select [OK] to conrm.
»The record is deleted.
Delete all records
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this chapter).
2 Select a contact, then select [Option] >
[Delete all]. Press [OK] to conrm.
»A conrmation request is displayed on
the handset.
3 Press [OK] to conrm.
»All records are deleted.
2 Select a contact, then select [Option] >
[Edit], then press [OK] to conrm.
3 Edit the name, then press [OK] to conrm.
4 Edit the number, then press [Save] to
conrm.
»The record is saved.
Tip
•Press [Clear] to delete the character. Press / to
move the cursor left and right.
Set the melody
You can personalize the melody played when
someone in the phonebook calls you.
Note
•Make sure that you have subscribed to the caller line
identication service before you can use this feature.
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph of this chapter).
2 Select a contact, then press [Option] >
[Select melody].
3 Press [OK] to set or change the melody
for the contact.
4 Select a melody for the contact, then press
[OK] to conrm.
»The melody is set.
Delete a record
1 Access the phonebook directories on
the handset/base station (see “Access the
phonebook directories” in the previous
paragraph in this chapter).
EN
32
Tip
•Press [Update] to update the call log.
On the base station,
1 Press .
2 Select the call log from the land line
( [Home] ) or Bluetooth line ([Mobile 1]
or [Mobile 2]).
»The call log is displayed.
View the call records
1 Access the call log menu on the handset/
base station (see “Access the call records”
in the previous paragraph in this chapter).
2 Select a record, then press [OK] to view
the available information.
Download the phonebook
from the mobile phone or
computer
Tip
•For information, see”Synchronize the phonebook and
call log” in the “Bluetooth” section.
Return a call
1 Access the call log menu on the handset/
base station (see “Access the call records”
in the previous paragraph in this chapter).
2 Select a record on the list.
3 To make a call, either:
• Press or on the handset; or
• Press /HOME or /MOBILE on
the base station.
4 Then select a line to make the call.
9 Call log
The call log stores the call history of all missed
or received calls. The incoming call history
includes the name and number of the caller, call
time, and date. This feature is available if you
have registered to the caller ID service with
your service provider.
You can access the call log from the land line or
either of the two mobile phones through the
handset and base station.
Your phone can store up to 50 call records. The
call log icon on the handset and base station
ashes to remind you of any unanswered calls.
If the caller allows the display of his identity, you
can view his name or number. The call records
are displayed in chronological order with the
most recent received call at the top of the list.
Note
•Make sure that the number in the call list is valid before
you can call back directly from the call list.
The following icon shown on the screen
informs you if you have missed calls.
It ashes when there is a new
missed call.
It is steadily on when browsing the
new missed calls in call log.
Access the call records
On the handset,
1 Press or select [Menu] > , then press
[OK] to conrm.
2 Select [Incoming calls].
3 Select the call log from the land line or
Bluetooth line ( / / ).
»The call log is displayed.
EN
33
Delete all call records
1 Access the call log menu on the handset/
base station (see “Access the call records”
in the previous paragraph in this chapter).
2 Select [Option] > [Delete all], then press
[OK] to conrm.
»A conrmation request is displayed on
the handset.
3 Press [OK] to conrm.
»All records are deleted.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Save a call record to the
phonebook
1 Access the call log menu on the handset/
base station (see “Access the call records”
in the previous paragraph in this chapter).
2 Select a record, then press [Option].
3 Select [Save], then press [OK] to conrm.
4 Enter and edit the name, then press [OK]
to conrm.
5 Enter and edit the number, then press
[Save] to conrm.
»The record is saved.
Delete a call record
1 Access the call log menu on the handset/
base station (see “Access the call records”
in the previous paragraph in this chapter).
2 Select a record, then press [Option] to
conrm.
3 Select [Delete], then press [OK] to
conrm
»A conrmation requests is displayed
on the handset.
4 Press [OK] to conrm.
»The record is deleted.
EN
34
Save a redial record to the
phonebook
1 Access the redial list on the handset/base
station (see “Access the redial list” in the
previous paragraph in this chapter).
2 Select a record, then press [Option] to
conrm.
3 Select [Save number], then press [OK] to
conrm.
4 Enter and edit the name, then press [OK]
to conrm.
5 Enter and edit the number, then press
[Save] to conrm.
»The record is saved.
Delete a redial record
1 Access the redial list on the handset/base
station (see “Access the redial list” in the
previous paragraph in this chapter).
2 Select a record, then press [Option] to
conrm.
3 Select [Delete], then press [OK] to
conrm.
»A conrmation request is displayed on
the handset.
4 Press [OK] to conrm.
»The record is deleted.
10 Redial list
You can access the redial list through the
handset or base station. The redial list stores the
call history of dialed calls. It includes the names
and/or numbers you have called. This phone can
store up to 20 redial records.
Access the redial list
On the handset,
1 Press .
2 Select the redial list from the land line or
Bluetooth line ( / / ).
»The redial list is displayed.
On the base station,
1 Press REDIAL .
2 Select the redial list from the land line (
[Home] ) or Bluetooth line ([Mobile 1] or
[Mobile 2]).
»The redial list is displayed.
Redial a call
1 Access the redial list on the handset/base
station (see “Access the redial list” in the
previous paragraph in this chapter).
2 Select the record you want to call.
3 You can make a call in either way:
• Press or on the handset; or
• Press /HOME or /MOBILE on
the base station .
4 Then select a line to make the call.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
EN
35
Delete all redial records
1 Access the redial list on the handset/base
station (see “Access the redial list” in the
previous paragraph in this chapter).
2 Select [Option] > [Delete all], then press
[OK] to conrm.
»A conrmation request is displayed on
the handset.
3 Press [OK] to conrm.
»The record is deleted.
EN
36
3 Select [On]/[Off], and press [OK] to
conrm.
»The setting is saved.
»ECO is displayed in standby mode.
Note
•When ECO is activated, the connection range between
the handset and the base station can be reduced.
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1 Access the “Phone settings” menu on
the handset or base station (see “Access
the phone settings menu” in the previous
paragraph in this chapter).
2 Select [Phone name], then press [OK] to
conrm.
3 Enter or edit the name. To erase a
character, select [Clear].
4 Press [Save] to conrm.
»The setting is saved.
Set the display language
Note
•This feature only applies to models with multiple-
language support.
•Languages available for selection vary from country to
country.
•You can set a different language separately on the
handset and base station. When you change the display
language on the handset, it does not mean the display
language on the base station is changed as well.
1 Access the “Phone settings” menu on
the handset or base station (see “Access
11 Phone settings
You can customize the settings to make it your
own phone.
Access the phone settings
menu
On the handset
Select [Menu] > , then press [OK] to
conrm.
On the base station
1 Press MENU.
2 Select [Phone setup], then press [OK] to
conrm.
Set the date and time
For information, see “Set the date and time”
and “Set the date and time format” in the “Get
started” section.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1 Access the “Phone settings” menu on
the handset or base station (see “Access
the phone settings menu” in the previous
paragraph in this chapter).
2 Select [Eco mode], then press [OK] to
conrm.
EN
37
the phone settings menu” in the previous
paragraph in this chapter).
2 Select [Language], then press [OK] to
conrm.
3 Select a language, then press [OK] to
conrm.
»The setting is saved.
Line settings
You can select to access the land line or the
Bluetooth lines.
1 Access the “Phone settings” menu on
the handset or base station (see “Access
the phone settings menu” in the previous
paragraph in this chapter).
2 Select [Line settings], then press [OK] to
conrm.
3 Select a new setting, then press [OK] to
conrm.
»The setting is saved.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority. Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
EN
38
7 Select [Alarm tone], then press [OK].
8 Select a tone from options, then press
[OK] to conrm.
»The alarm is set and is displayed on
the screen.
Tip
•Press * to switch between [AM]/[PM].
12 Alarm clock
Your phone has a built-in alarm clock. Check
the information in the following paragraphs to
set your alarm clock.
Access the Alarm menu
On the handset
Select [Menu] > , then press [OK] to conrm.
On the base station
1 Press MENU.
2 Select [Alarm], then press [OK] to
conrm.
Set the alarm
1 Access the “Alarm” menu on the handset
or base station (see “Access the alarm
menu” in the previous paragraph in this
chapter).
2 Select [On]/[Off], then press [OK] to
conrm.
3 Select [Alarm time], then press [OK] to
conrm.
4 Enter an alarm time, then press [OK] to
conrm.
5 Select [Repetition], then press [OK] to
conrm.
6 Select an alarm occurrence, then press
[OK] to conrm.
EN
39
13 Display settings
You can change the brightness of the display,
color theme, and screen saver of the phone.
Access the Display menu
On the handset
Select [Menu] > , then press [OK] to conrm.
Set the display
1 Access the “Display settings” menu on the
handset (see “Access the Display settings
menu” in the previous paragraph in this
chapter).
2 Select [Display], then press [OK] to
conrm.
3 Select [Brightness]/[Clock]/[Screen saver],
then press [OK] to conrm.
4 Select an option, then press [OK] to
conrm.
EN
40
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [Ring tones], then press [OK] to
conrm.
3 Select a ringtone, then press [OK] to
conrm.
»The setting is saved.
Set the silent mode
You can set your phone to silent mode and
enable the silent mode for a specied duration.
When the silent mode is activated, your phone
does not ring or send any alerts or sound.
Note
•When you press to nd your handset, or when you
activate the alarm, your phone still sends an alert even
when the silent mode is activated.
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [Silent mode], then press [OK] to
conrm.
3 Select [On]/[Off], then press [OK] to
conrm.
4 Select [Start & end], then press [OK] to
conrm.
5 Set the start time and end time of the
silent mode, then press [OK] to conrm.
»The setting is saved.
» is displayed.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
14 Sound settings
You can customize the sound settings of your
phone.
Access the sounds menu
On the handset
Select [Menu] > , then press [OK] to
conrm.
On the base station
1 Press MENU.
2 Select [Sounds], then press [OK] to
conrm.
Set the handset’s ringtone
volume
You can select among 5 ringtone volume levels
or [OFF].
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [Ring volume], then press [OK] to
conrm.
3 Select a volume level, then press [OK] to
conrm.
»The setting is saved.
Tip
•To turn the ringtone off, press and hold in standby
mode. Then is displayed on the screen.
Set the handset’s ringtone
You can select from 15 ringtones.
EN
41
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [Key tone], then press [OK] to
conrm.
3 Select [On]/[Off], then press [OK] to
conrm.
»The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [Docking tone], then press [OK] to
conrm.
3 Select [On]/[Off], then press [OK] to
conrm.
»The setting is saved.
Set the sound prole
You can set the sound in the earpiece among 3
different proles.
1 Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2 Select [My sound], then press [OK] to
conrm.
3 Select your preferred prole, then press
[OK] to conrm.
»The setting is saved.
EN
42
Manage the carrier code
Note
•This feature only applies to models with carrier code
support.
You can dene a carrier code (up to 5 digits).
This carrier code is automatically removed from
an incoming call if it matches with the code you
dene. Then the phone number is saved in the
call log without a carrier code.
Activate auto removal of the carrier
code
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Carrier code], then press [OK] to
conrm.
3 Enter the carrier code, then press [OK] to
conrm.
»The setting is saved.
Deactivate auto removal of the area
code
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Carrier code], then press [OK] to
conrm.
3 Press [Clear] to delete all the digits.
4 Press [OK] to conrm.
»The setting is saved.
15 Services
The phone supports a number of features that
help you handle and manage the calls. You can
access the “Services” menu through the handset
or base station.
Access the services menu
On the handset
Select [Menu] > , then press [OK] to
conrm.
On the base station
1 Press MENU.
2 Select [Services], then press [OK] to
conrm.
Auto conference
To join an external call with another handset,
press .
Activate/Deactivate auto conference
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Conference], then press [OK] to
conrm.
3 Select [Auto]/[Off], then press [OK] to
conrm.
»The setting is saved.
EN
43
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Set auto prex
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Auto prex], then press [OK] to
conrm.
3 Enter the detect number, then press [OK]
to conrm.
4 Enter the prex number, then press [OK]
to conrm.
»The setting is saved.
Note
•To enter a pause, press and hold .
Note
•If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
Note
•The feature is unavailable if the dialed number starts
with * and #.
Manage the area code
Note
•This feature only applies to models with area code
support.
You can dene an area code (up to 5 digits).
This area code is automatically removed from
an incoming call if it matches with the code you
dene. Then the phone number is saved in the
call log without an area code.
Activate auto removal of the area
code
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Area code], then press [OK] to
conrm.
3 Enter the area code, then press [OK] to
conrm.
»The setting is saved.
Deactivate auto removal of the area
code
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Area code], then press [OK] to
conrm.
3 Press [Clear] to delete all the digits.
4 Press [OK] to conrm.
»The setting is saved.
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
EN
44
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Dial mode], then press [OK] to
conrm.
3 Select a dial mode, then press [OK] to
conrm.
»The setting is saved.
Note
•If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the rst ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the rst
ring. You can change this setting to suit your
preference. This feature only applies to models
with rst ring support.
Turn the rst ring on/off
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [First ring], then press [OK] to
conrm.
Network type
Note
•This feature only applies to models with network type
support.
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Network type], then press [OK].
3 Select a network type, then press [OK].
»The setting is saved.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Recall time], then press [OK] to
conrm.
3 Select an option, then press [OK] to
conrm.
»The setting is saved.
Dial mode
Note
•This feature only applies to models that support both
tone and pulse dial.
EN
45
Auto registration
Place the unregistered handset on the base
station.
»The handset detects the base station
and registers automatically.
»Registration is completed in less than 2
minutes. The base station automatically
assigns a number to the handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1 Access the “Services” menu on the handset
(see “Access the services menu” in the
previous paragraph in this chapter).
2 Select [Register], then press [OK] to
conrm.
3 Press and hold on the base station for
5 seconds until you hear a conrmation
beep.
4 Enter the system PIN. Press [Clear] to
make corrections.
5 Press [OK] to conrm the PIN.
»Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•If the PIN is incorrect or no base is found within a
certain period, your handset displays a notication
message. Repeat the above procedure if registration
fails.
Note
•The preset PIN is 0000. No change can be made on it.
3 Select [On]/[Off], press [OK] to conrm.
»The setting is saved.
Note
•To reset the rst ring status, go to the reset menu.
Auto clock
Note
•This service is network-dependent.
Note
•Make sure that you have the caller ID service before
you have this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. To synchronize
the date, make sure that the current year is set.
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Auto clock], then press [OK] to
conrm.
3 Select [On]/[Off], then press [OK] to
conrm.
»The setting is saved.
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
EN
46
Call forward
You can divert your calls to another phone
number. You can select among 3 options:
• [Call forward]: divert all incoming calls to
another number.
• [Call fwd busy]: divert calls when the line
is busy.
• [Call fwd unans]: divert calls when no one
answers.
Activate/Deactivate call forward
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Call forward]/
[Call fwd busy]/[Call fwd unans]
3 Select [Activate]/[Deactivate], then press
[OK] to conrm.
4 Enter the telephone number.
»The setting is saved.
Edit the activation/deactivation code
You can edit the prex and sufx to the call
forward codes.
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Call forward]/
[Call fwd busy]/[Call fwd unans], then
press [OK] to conrm.
3 Select [Change code], then press [OK].
4 Then you can either
• Select [Activation] > [Prex]/[Sufx],
then press [OK] to conrm; or
• Select [Deactivation], then press
[OK] to conrm.
5 Enter or edit the code, then press [OK] to
conrm.
»The setting is saved.
Unregister the handsets
If two handsets share the same base station, you
can unregister a handset with another handset.
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Unregister], then press [OK] to
conrm.
3 Enter the system PIN. Press [Clear] to
make corrections.
4 Select the handset number to be
unregistered.
5 Press [OK] to conrm.
»The handset is unregistered.
Tip
•The handset number is displayed beside the handset
name in standby mode.
Note
•The preset PIN is 0000. No change can be made on it.
Call services
The call services are network and country
dependent. Contact your service provider for
information.
Note
•For the call services to work properly, make sure that
the activation and/or deactivation codes are correctly
entered.
EN
47
Edit the cancel call-back service
number
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Cancel call bk] >
[Settings], then press [OK] to conrm.
3 Enter or edit the number, then press [OK]
to conrm.
»The setting is saved.
Hide your identity
You can hide your identity from the caller.
Activate ID withheld
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Hide my ID] >
[Activate], then press [OK] to conrm.
»When you make a call to your contact,
your ID is withheld.
Edit the ID withheld code
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Hide my ID] >
[Settings], then press [OK] to conrm.
3 Enter or edit the number, then press [OK]
to conrm.
»The setting is saved.
Restore default settings
You can reset your phone settings to the
original factory settings.
Call return
You can check the most recent unanswered call.
Call the return service centre
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Call return] >
[Call], then press [OK] to conrm.
»Your call is made to the service centre.
Edit the call return service centre
number
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Call return] >
[Settings], then press [OK] to conrm.
3 Enter or edit the number, then press [OK]
to conrm.
»The setting is saved.
Call-back service
The call-back service noties you when a party
you have tried to call becomes available. You
can cancel this service from the menu after you
have activated it from the service provider.
Cancel the call-back service
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Call Services] > [Cancel call bk] >
[Call], then press [OK] to conrm.
»A call is made to the service centre to
cancel the call-back option.
EN
48
1 Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2 Select [Reset], then press [OK] to conrm.
»A conrmation request is displayed on
the handset.
3 Press [OK] to conrm.
»All settings are reset.
Tip
•For information about the default settings, see the
section on “Default settings”.
EN
49
2 Select the handset number, then press
[OK] to conrm.
Send to an external line
1 Select [Menu] > > [Send alert to]
> [External line], then press [OK] to
conrm.
2 Enter a telephone number, then press
[OK] to conrm.
Set the baby cry level
1 Select [Menu] > > [Baby cry level], then
press [OK] to conrm.
2 Select a new setting, then press [OK] to
conrm.
»The setting is saved.
16 Baby monitor
Your phone supports the baby monitor function
which sends an alert when the sound level
exceeds the set limit. You can access the baby
monitor menu through the handset.
Note
•The baby monitor feature is available only in multi-
handset versions.
Activate/Deactivate the baby
monitor
Select [Menu] > > [Activate], then press
[OK] to conrm.
»The baby monitor mode is activated.
Tip
•To exit from the baby monitor menu, press .
Note
•When the baby monitor mode is activated, the baby
handset does not ring on incoming calls.
Send an alert
You can send an alert to other handsets or an
external line.
Send to other handsets
1 Select [Menu] > > [Send alert to] >
[Connected line], then press [OK] to
conrm.
EN
50
Note
•When the answering machine is switched on, it answers
incoming calls after a certain number of rings based on
the ring delay setting.
Set the answering machine
language
Note
•This feature only applies to models with multiple-
language support.
The answering machine language is the language
for the announcements.
1 Select [Menu] > > [Voice language],
then press [OK] to conrm.
2 Select a language, then press [OK] to
conrm.
»The setting is saved.
Set the answer mode
You can set the answering machine and
select if the callers can leave messages. Select
[Answer & rec.] if you allow the callers to leave
messages. Select [Answer only] if you forbid
the callers to leave messages.
1 Select [Menu] > > [Answer mode],
then press [OK] to conrm.
2 Select an answer mode, then press [OK]
to conrm.
»The setting is saved.
Note
•If the memory is full, the answering machine switches to
[Answer only] mode automatically.
17 Telephone
answering
machine
Your phone includes a telephone answering
machine that records unanswered calls when
it is on. By default, the answering machine is
set to [Answer & rec.]. You can also access the
answering machine remotely and change the
settings through the answering machine menu
on the handset.
The LED indicator on the base station lights up
when the answer machine is on.
Turn on/off the answering
machine
You can turn on/off the answering machine
through the base station or the handset.
Through the handset
1 Select [Menu] > > [Answer mode],
then press [OK] to conrm. Then you can
select among the options below:
• To turn on the answering machine,
select either [Answer & rec.] or
[Answer only].
• To turn off the answering machine,
select [Off].
2 Press [OK] to conrm.
»The setting is saved.
Through the base
Press to turn on/off the answering machine in
standby mode.
EN
51
Note
•You can no longer listen to the announcement when
you pick up an incoming call.
Restore the default announcement
1 Select [Menu] > > [Announcement],
then press [OK] to conrm.
2 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
3 Select [Use default], then press [OK] to
conrm.
»The handset displays a conrmation
request.
4 Press [OK] to conrm.
»The default announcement is restored.
Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator ashes on the answering
machine and the handset displays a notication
message.
Note
•If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
Note
•If the memory is full, the answering machine switches
to [Answer only] automatically. Delete old messages to
receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
Announcements
The announcement is the message your caller
hears when the answering machine picks up
the call. The answering machine has 2 default
announcements: the [Answer & rec.] mode
and [Answer only] mode.
Record an announcement
The maximum length of the announcement you
can record is 3 minutes. The newly recorded
announcement automatically replaces the old
one.
1 Select [Menu] > > [Announcement],
then press [OK] to conrm.
2 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
3 Select [Record new], then press [OK] to
conrm.
4 Recording starts after the beep.
5 Press [OK] to stop recording or the
recording stops after 3 minutes.
»You can listen to the newly recorded
announcement on the handset.
Note
•Make sure that you speak close to the microphone
when you record an announcement.
Listen to the announcement
1 Select [Menu] > > [Announcement],
then press [OK] to conrm.
2 Select [Answer & rec.] or [Answer only],
then press [OK] to conrm.
3 Select [Play], then press [OK] to conrm.
»You can listen to the current
announcement.
EN
52
Delete all old incoming messages
From the base
Press and hold in standby mode.
»All old messages are permanently
deleted.
From the handset
1 Select [Menu] > > [Delete all], then
press [OK] to conrm.
»The handset displays a conrmation
request.
2 Press [OK] to conrm.
»All old messages are permanently
deleted.
Note
•You can only delete the read messages. No deleted
messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press to answer the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1 Select [Menu] > > [Msg quality], then
press [OK] to conrm.
2 Select the new setting, then press [OK] to
conrm.
»The setting is saved.
From the base
• To start/stop listening, press .
• To adjust the volume, press / .
• To play the previous message, press
[Option] > [Previous].
• To replay the current message, press
[Option] > [Repeat].
• To play the next message, press [Option]
> [Forward].
• To delete the current message, press .
Note
•No deleted messages can be recovered.
From the handset
Select [Menu] > > [Play], then press [OK]
to conrm.
»New messages start playing. Old
messages start playing if there is no
new message.
• Press [Back] to stop listening.
• Press [Option] to enter the options menu.
• Press / to increase/decrease the
volume.
Delete an incoming message
From the base
Press when you listen to the message.
»The current message is deleted.
From the handset
1 When you listen to the message, press
[Option] to enter the options menu.
2 Select [Delete], then press [OK] to
conrm.
»The current message is deleted.
EN
53
Change the PIN code
1 Select [Menu] > > [Remote access] >
[Change PIN], then press [OK] to conrm.
2 Enter the old PIN, then press [OK] to
conrm.
3 Enter the new PIN code, then press [OK]
to conrm.
4 Enter the new PIN code again, then press
[OK] to conrm.
»The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1 Select [Menu] > > [Remote access],
then press [OK] to conrm.
2 Select [Activate]/[Deactivate], then press
[OK] to conrm.
»The setting is saved.
Access the answering machine
remotely
1 Make a call to your home number with a
touch tone phone.
2 Enter # when you hear the announcement.
3 Enter your PIN code.
»You now have access to your
answering machine, and you can listen
to the new messages.
Note
•You have 2 chances to enter the correct PIN code,
before your phone hangs up.
4 Press a key to carry out a function. See the
‘Remote access commands’ in the following
table for a list of available functions.
Note
•The sound quality can only be adjusted before
recording starts.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine.
1 Select [Menu] > > [Ring delay], then
press [OK] to conrm.
2 Select a new setting, then press [OK] to
conrm.
»The setting is saved.
Note
•Make sure that the answering machine is switched on
before this feature can be applied.
Tip
•When you access the answering machine remotely,
you are recommended to set the ring delay to[Toll
saver] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; when
there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
EN
54
Note
•When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7Switch the answering machine on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9Switch the answering machine off.
(not available when you listen to
the messages).
EN
55
18 Default settings
Language* Country dependent
Handset name PHILIPS
Date 01/01/11
Date format* Country dependent
Time* Country dependent
Time format* Country dependent
Alarm [Off]
Phonebook list Unchanged
Recall time* Country dependent
First ring* Country dependent
Conference [Off]
Dial mode* Country dependent
Handset ring melody* Country dependent
Receiver volume [Volume 3]
Handset ring volume [Level 3]
Handset key beep [On]
Incoming call log Empty
Redial list Empty
Line settings [Auto]
Answering Machine
Ans machine status [On]
Ans machine mode [Answer & rec.]
Base call screening [On]
Announcement memory Default
announcement
Incoming message
memory
Empty
Remote access [Off]
PIN code 0000
Voice language* Country
dependent
Ring delay [5 rings]
Speaker volume [Level 3]
Note
•*Country dependent features
EN
56
19 Technical data
Display
• 64 color TFT display
General telephone features
• Dual mode caller name & number
identication
• Conference call and voice mails
• Intercom
• Maximum talk time: 22 hours
Phonebook list, Redial list and Call log
• Phonebook list with 200 entries for the
land line, 500 entries for mobile 1 and 500
entries for mobile 2.
• Redial list with 20 entries
• Call log with 50 entries
Battery
• Ni-MH AAA 1.2V 750mAh
Power adapter
Base
• SSW-2207XX, Input: 230 V, 50Hz 0.2A,
Output: 5.5V 1.5A
Charger
• SSW-2095XX-1, Input: 100 – 240V, 50-
60Hz 0.2A, Output: 5V 600mA
Power consumption
• Power consumption at standby mode:
around 1.2W
Weight and dimensions
• Handset: 117. 4 grams
• 167.5 x 49.3 x 27 mm (H x W x D)
• Base: 376.2 grams
• 57.3 x 243.5 x 109.7 mm (H x W x D)
• Charger: 56.8 grams
• 94.47 x 82.03 x 53.04 mm (H x W x D)
Temperature range
• Operation: 0°C to +35°C (32°F to 95°F)
• Storage: -20°C to +45°C (-4°F to 113°F)
Relative humidity
• Operation: Up to 90% at 40°C
• Storage: Up to 95% at 40°C
EN
57
put the base station in registration mode, then
follow the procedure described in the handset
manufacturer’s instructions.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips conrms that if its products are
handled properly for their intended use, they
are safe to use according to scientic evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardization for early
integration in its products.
Disposal of your old product
and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
20 Notice
Declaration of conformity
Hereby Philips Consumer Lifestyle, Accessories,
declares that the SE888 is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC. You can nd
the Declaration of Conformity on www.p4c.
philips.com.
This product has been designed, tested and
manufactured according the European R&TTE
directive 1999/5/EC. Following this directive,
this product can be brought into service in the
following countries:
Use GAP standard
compliance
The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make. The handset and base station are
GAP compliant, which means they guarantee
the minimum functions: register a handset,
take the line, make a call and receive a call. The
advanced features may not be available if you
use them with other makes. To register and use
this handset with a GAP compliant base station
of different make, rst follow the procedure
described in the manufacturer’s instructions,
then follow the procedure described in this
manual for registering a handset. To register a
handset from different make to the base station,
EN
58
owners. The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and
any use of such marks by Koninklijke Philips
Electronics N.V. is under license.
iPhone are trademarks of Apple Inc., registered
in the U.S. and other countries.
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
When this logo is attached to a product, it
means a nancial contribution has been paid to
the associated national recovery and recycling
system.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademarks
Trademarks are the property of Koninklijke
Philips Electronics N.V. or their respective
EN
59
•Check and upgrade the OS (operation
system) version of your mobile phone/
iphone.
I can neither pair the SE888 with my mobile
phone, nor synchronize the phonebook or
call log.
•You can nd the list of mobile phones
which are compatible with SE888 in
Bluetooth compatibility list for SE888.pdf
saved in the CD rom or at http://www.
philips.com/support
•When the Bluetooth device list is full,
remove the mobile phone/computer name
before pairing can start.
•If the mobile phone name exists in your
mobile phone, you have to remove it from
your mobile phone. Then you can do the
pairing again.
•Check and upgrade the OS (operation
system) version of your mobile phone/
iphone.
My mobile phone/iphone does not reconnect
to SE888 automatically.
•You can nd the list of mobile phones
which are compatible with SE888 in
Bluetooth compatibility list for SE888.pdf
saved in the CD rom or at http://www.
philips.com/support
•Check and upgrade the OS (operation
system) version of your mobile phone/
iphone.
I cannot pair my computer with SE888.
The PC application software only supports
Bluetooth devices with Bluetooth protocol
driver specied below. Check your Bluetooth
device and change it if necessary.
• Microsoft Stack compatible
• Broadcom Stack V 5.1.0.1700, V
5.1.0.2100 and 5.1.0.3500 Retail
I still cannot pair my computer with SE888
even I have changed my Bluetooth device.
Disable the internal computer Bluetooth device.
For information, see the user manual of your
computer. Then, install an external Bluetooth
device that supports the Bluetooth protocol
driver already mentioned above.
21 Frequently
asked questions
No signal bar is displayed on the screen.
•The handset is out of range. Move it closer
to the base station.
•If [Unregister] is displayed on the handset,
put the handset on the base until the signal
bar is displayed.
Tip
•For further information, see “Register the handsets” on
the Services section.
I cannot charge up my mobile phone.
•Make sure that the iPhone USB charging
cable or micro-USB charging cable is
connected correctly. SE888 is mainly
supporting single mobile charging. If two
mobiles are connected to SE888 and if the
total battery charging is over the limit, you
receive a message. In this case, you need to
disconnect one mobile phone from battery
charging.
•If you still fail to charge up the mobile
phone even after you have removed one
of the two mobile phones, disconnect
all mobile phones from battery charging.
Reconnect one mobile only to SE888 and
charge it again.
•SE888 mainly supports iPhone charging
and those mobile phones complying with
the EU harmonized standard for mobile
charging. If your mobile phone cannot be
charged with SE888, it is because your
mobile phone does not support the EU
harmonized standard.
•You can nd the list of mobile phones
which SE888 supports for charging in
Charging compatibility list for SE888.pdf
saved in the CD rom or at http://www.
philips.com/support
EN
60
Make sure that the handset ringtone is turned
on.
The caller ID does not display.
•The service is not activated. Check with
your service provider.
•The caller’s information is withheld or
unavailable.
Note
•If the above solutions do not help, disconnect the
power supply from both the handset and base station.
Try again after 1 minute.
There is unknown text/symbols displayed on
the phonebook list.
Normally, SE888 can recognize the text/symbols
specied in the section “Text and number”. If
you still nd unknown text/symbols, you are
recommended to change them to English text.
If I fail to register the additional handsets to
the base station, what do I do?
Your base memory is full. Unregister the unused
handsets and try again.
No dialing tone
•Check your phone connections.
•The handset is out of range. Move it closer
to the base station.
I cannot change the settings of my voice mail.
The voice mail service is managed by your
service provider but not the phone itself.
Contact your service provider to change the
settings.
The handset on the charger does not charge.
•Make sure that the batteries are inserted
correctly.
•Make sure that the handset is placed
properly on the charger. The battery icon
animates when charging.
•Make sure that the docking tone setting
is turned on. When the handset is placed
correctly on the charger, you can hear a
docking tone.
•The charging contacts are dirty. Disconnect
the power supply rst and clean the
contacts with a damp cloth.
•Batteries are defective. Purchase new ones
from your dealer.
No display
•Make sure that the batteries are charged.
•Make sure that there is power and the
phone is connected.
Bad audio (crackles, echo, etc.)
•The handset is nearly out of range. Move it
closer to the base station.
•The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
•The phone is at a location with thick walls.
Move the base away from them.
The handset does not ring.
EN
IFU_SE888_EN_V2.0
WK12245
0168
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.