QNAP QSW-1105-5T User Manual
Displayed below is the user manual for QSW-1105-5T by QNAP which is a product in the Network Switches category. This manual has pages.
Related Manuals
Quick Installation Guide
QSW-1105-5T
Quick Installation Guide
Bracket screws Anchors Foot pads
Quick installation guidePower supply
QSW-1105-5T
1. Power LED 3. 2.5GbE RJ45 ports
2. Loop indicator 4. Power input
1 2 3 4
LED Status Description
Power Green Device is on.
O Device is o.
Loop indicator
O No loop.
Red and ashing with the looping
RJ45 port. Loop occurs.
RJ45
Green Linked at 2.5Gbps.
Amber Linked at <2.5Gbps.
Flashing without Loop indicator Port is transmitting.
Flashing with Loop indicator Port loops.
O No link.
LED Behavior
Model QSW-1105-5T
Dimensions (H x W x D) 34 x 180 x 145 mm
Net weight Around 577 g
Input voltage range 100–240VAC
Switching capacity 25 Gbps
2.5GbE RJ45 ports 5
Operating temperature 0˚C–40˚C (32°F –104°F)
Relative humidity 10% to 90% (non-condensing)
Specications
1 2
2
1
2
更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址 www.qnap.com/regulatory/。
声明 此为 A 级产品，在生活环境中，该产品肯能会造成无线电干扰。 在这种情况下，可能需要
用户对其干扰采取切实可行的措施。仅适用于海拔 2000m 以下地区安全使用。
※付属の電源コードは当該製品専用です。他の機器に使用しないでください。
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Class B Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Modications:
Any modications made to this device that are not approved by QNAP Systems, Inc. may void the
authority granted to the user by the FCC to operate this equipment.
This QNAP device complies with CE Compliance Class B.
According to the requirement of the WEEE legislation the following user information is provided to
customers for all branded QNAP products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop
o your waste equipment for recycling, please contact your local city oce, your household waste
disposal service or the shop where you purchased the product.
download.qnap.com
service.qnap.com
install.qnap.com