QNAP QSW-1208-8C User Manual
Displayed below is the user manual for QSW-1208-8C by QNAP which is a product in the Network Switches category. This manual has pages.
Related Manuals
www.qnap.com
Kurzinstallationsanleitung 快速安装指南
Guida di installazione rapida Pika-asennusopas
快速安裝手冊
빠른 설치 설명서
Guía de Instalación Rápida
クイックインストールガイド
Hızlı Kurulum Kılavuzu
คู่มือการติดตั้งแบบเร็ว Gyors telepítési útmutató
Průvodce rychlou ins talací
Instrukcja szybkiej instalacji
Guia de Instalação Rápida
Hurtig installationsvejledning
Pika-asennusopas Installatiegids
Snelle Installatiegids
Hurtiginstallasjonsveiledning
Snabbinstallationsguide
Краткое руководство по установке
QSW-1208-8C
Quick Installation Guide
1
QSW-1208-8C
Package Contents
Rackmount brackets Power cordFoot pads Bracket screws
2
Hardware Overview
SFP+/RJ45 Combo Ports 5-12
Each port number has two types: SFP+ and RJ45. Users may select either one to connect.
SFP+ Ports 1-4
SFP+ ports support 10 Gbps connections.
Front Panel Ports
3
SFP+ Ports 1-12
▪ Off: No link.
▪ Green: Link is up and operates at 10 Gbps. Flashing
indicates network activity.
▪ Amber: Link is up and operates at 1 Gbps. Flashing
indicates network activity.
Front Panel LED
Status
▪ Off: System down.
▪ Green: System is ready for use. Flashing indicates
bootup in progress.
▪ Amber: System warning, e.g. high temperature or fan
error.
RJ45 Ports 5-12
▪ Off: No link.
▪ Green: Link is up and operates at 10 Gbps. Flashing
indicates network activity.
▪ Amber: Link is up and operates at 1 Gbps, 2.5 Gbps
or 5 Gbps. Flashing indicates network activity.
4
Back Panel
Side Panel
AC Input Power
Bolt Hole
Bolt HoleFan
K-SlotMaintenance Port
5
Horizontal Surface
Place four foot pads at the bottom of the QSwitch.
Mounting in a Rack
Attach the rackmount brackets to the QSwitch using six bracket screws.
Attach the QSwitch to the rack using two mounting screws.
1
1
2 2
Hardware Installation
1
2
6
Connecting RJ45
Connect an Ethernet cable from your computer or host system to any RJ45 port of the QSwitch.
Connect Ethernet cable from your device to other RJ45 ports of the QSwitch.
5
1 2
Combo Port Instruction
You can only choose either SFP+ or RJ45 for connection. RJ45 will have higher priority if both
connections are used.
7
Connecting Power
Connecting SFP+
Connect the power cord to the power port of the QSwitch.
Connect the other end of the power cord to a power outlet.
Plug a compatible ber module into any SFP+ port of the QSwitch.
Connect an optical ber cable to the ber module. Then connect the other end of the cable to another
ber device.
3
4
1
2
1
2
8
Specications
Model QSW-1208-8C
Dimensions (H x W x D) 43 x 285 x 233 mm
Net weight 2.15 kg
Supported voltage range 100 to 240VAC
Switching capacity 240Gbps
SFP+ ports 4
Combo ports (SFP+/RJ45) 8
Operating temperature 0 - 40˚C / 32~104°F
Relative humidity 5~95% Non-condensing, wet bulb: 27˚C
9
更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址 www.qnap.com/regulatory/。
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this equipment.
This device complies with CE compliance Class A.
According to the requirement of the WEEE legislation the following user information is
provided to customers for all branded QNAP Electronics products subject to the WEEE
directive.
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or the shop where you purchased the
product.
10
Printed in Taiwan
P/N: 51000-024465-RS
docs.qnap.com
helpdesk.qnap.com
start.qnap.com
www.qnap.com/download