Table of Contents
QNAP TS-432PXU-RP User Manual
Displayed below is the user manual for TS-432PXU-RP by QNAP which is a product in the NAS & Storage Servers category. This manual has pages.
Related Manuals
Hardware Specification
TS-432PXU-RP-2G
CPU AnnapurnaLabs Alpine AL324 64-bit ARM® Cortex-A57 quad-core 1.7GHz
processor
CPU Architecture 64-bit ARM
Floating Point Unit Yes
Encryption Engine Yes
System Memory 2 GB UDIMM DDR4 (1 x 2 GB)
Maximum Memory 16 GB (1 x 16 GB)
Memory Slot 1 x Long-DIMM DDR4
Flash Memory 512 MB (Dual boot OS protection)
Drive Bay 4 x 3.5" SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable Yes
M.2 SSD Slot Optional via a PCIe adapter
SSD Cache Acceleration
Support
Yes
2.5 Gigabit Ethernet Port
(2.5G/1G/100M)
2 (also support 10M)
10 Gigabit Ethernet Port 2 x 10GbE SFP+
Wake on LAN (WOL) Yes
Jumbo Frame Yes
PCIe Slot 1
Slot 1: PCIe Gen 2 x2
USB 3.2 Gen 1 port 4
Form Factor 1U Rackmount
LED Indicators HDD 1-4, Status, LAN, Storage expansion
Buttons Power, Reset
Dimensions (HxWxD) 44 × 439 × 499 mm
Weight (Net) 8.12 kg
Weight (Gross) 11.12 kg
Operating temperature 0 - 40 °C (32°F - 104°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 250W (x2) PSU, 100 - 240V
Power Consumption:
Operating Mode, Typical
53.343 W
Fan 2 x 40mm, 12VDC
Sound Level 39 db(A)
System Warning Buzzer
Max. Number of
Concurrent Connections
(CIFS)
700
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front
of operating NAS.
Designs and specifications are subject to change without notice.