Table of Contents
Seagate XF1230-1A0480 User Manual
Displayed below is the user manual for XF1230-1A0480 by Seagate which is a product in the Internal Solid State Drives category. This manual has pages.
Related Manuals
Seagate® Nytro® XF1230 SATA SSD
Product Manual
XF1230-1A0240
XF1230-1A0480
XF1230-1A0960
XF1230-1A1920
100797573, Rev. D
August 2016
© 2016, Seagate Technology LLC All rights reserved. Publication number: 100797573, Rev. D, August 2016
Seagate Technology reserves the right to make changes to the product(s) or information disclosed herein at any time without notice.
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Nytro, Nytro WarpDrive and SeaTools are either trademarks or registered
trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report
a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file
format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by
the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice,
product offerings or specifications.
Revision History
Version and Date Description of Changes
Rev D, August, 2016 First public release of the document.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 3
Contents
Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Models and Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3.1 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.5 Endurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Pin and Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Serial ATA Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 Pin Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3 Connector Pin Signal Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.4 Power Pin Signal Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.5 SSD Activity LED Indicator (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Supported ATA Command List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1 ATA Feature Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 ATA Command Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.3 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3.1 Password Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. SMART Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.1 SMART Command Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.2 SMART Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6.3 SMART Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7. Safety, Standards, and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.1 Safety Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.2 Electromagnetic Compliance and Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.4 Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.5 Electromagnetic Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.6 Electromagnetic Compliance for the European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.7 Australian RCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.8 Korean KCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.9 Taiwanese BSMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7.10 China Requirements — China RoHS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
7.11 Japan VCCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.11.1 Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 4
Seagate Technology Support Services
For Nytro® Support, visit: http://www.seagate.com/support/by-product/ssd-and-pcie-flash/
For information regarding online support and services, visit: http://www.seagate.com/contacts/
Available services include:
Presales & Technical support
Global Support Services telephone numbers & business hours
Authorized Service Centers
For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/
For information regarding data recovery services, visit:
http://www.seagate.com/services-software/seagate-recovery-services/recover/
For Seagate OEM and Distribution partner and Seagate reseller portal, visit: http://www.seagate.com/partners
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 5
www.Seagate.com Introduction
1. Introduction
The Seagate® Nytro® XF1230 SSDs provide high reliability and sustained performance for enterprise Server and
Storage products. The Nytro XF1230 series offers SATA interface, fully compatible with SATA 3.1 6.0Gb/s.
Table 1 Nytro XF1230 Card Features
Feature Description
Capacity 240, 480, 960, 1920 GB
Certifications,
Eco-Compliance
CE, UL, FCC, RCM, BSMI, KCC, Microsoft WHQL, SATA-IO
RoHS
Dimension (69.85±0.25) x (100±0.25) x (Max. 7) mm SSD Outer case can support suitable Z-height
for various host situations.
Endurance Endurance varies with product capacity. See Table10, Endurance, on page9.
Form 2.5 Inch Standard SSD
Interface
Compliance
Fully compliant with SATA revision 3.1, compatible with SATA 6.0Gb/s interface rates.
Fully compliant with ATA-8/ACS-3 Standard.
PIO, DMA, UDMA (up to 6, dependent on host) supported.
SATA 6.0Gb/s Native Command Queuing (NCQ): up to 32 commands.
SMART command transport (SCT) technology.
Data Set Management Command Trim support.
Latency
Read: 140 μs (Typ.)
Write: 60 μs (Typ.)
Latency measured with transfer size 4 KB and
queue depth of 1 on a random workload, and
based on high density (1920 GB).
NAND 16 nm
Performance
Random
(Sustained)
4 KB Read: Up to 98K IOPS
4 KB Write: Up to 16.8K IOPS
8 KB Read: Up to 58K IOPS
8 KB Write: Up to 8K IOPS
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance, on page 7.
Typical I/O performance numbers measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Performance
Sequential
(128 KB
Sustained)
Read: Up to 560MB/s
Write: Up to 505MB/s
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance, on page 7.
Typical I/O performance numbers as measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Power
Consumption
Active: Up to 5.7 W
Idle: Up to 1.0 W
See Section 2.3, Power, on page 8.
RMS Average.
NOTE This specification is for the 1920 GB drive;
smaller capacity drives have lower active
power.
Power Loss Protection
Power
Management
2.5 inch: 5 V SATA Supply
OS-aware hot plug/removal
Power On Ready Normal shut down: 5 s
Unsolicited shut down: 21 s
Based on High Density (1920 GB).
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 6
www.Seagate.com Introduction
Quality of
Service
Read/Write: 0.2 ms/0.9 ms (99.9%) Based on Random 4 KB, queue depth=1, and
1920 GB Density.
Reliability
MTBF: 2 million hours
BER: 1 error in 1017bits read
End-to-End data-path protection
Shock
Operating: 1500G, duration 0.5ms
Non-Operating: 1500G, duration 0.5ms
Temperature
Range
(Operating)
0°C to 70°C
Temperature Sensor (SMART Attribute ID 194)
Vibration
Operating:20G, 10~2 KHz
Non-Operating: 20G, 10~2 KHz
Voltage 5V±5%
Warranty Five years limited Warranty with Media Usage, based on the shorter of term or endurance usage of
the drive.
Weight up to 85g ±5%
Table 1 Nytro XF1230 Card Features (continued)
Feature Description
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 7
www.Seagate.com Specifications
2. Specifications
2.1 Models and Capacity
2.2 Performance
NOTE Information on performance:
Performance measured with queue depth set to 32.
4 KB = 4,096 bytes, 8 KB = 8,192 bytes.
Drive write cache enabled.
Measurements performed on Full Logical Block Address (LBA) range,
sustained for 2x Drive Capacity.
Set to 4 KB alignment.
Performance test precondition: Drive is preconditioned with 2x drive
capacity 128 KB write IOs.
Measured on system with Intel Xeon E5-2640v3 and C610 chipset with
on-board AHCI controller running Microsoft Windows® 2012 R2 DC.
System variations may affect measured results.
MB/s = 1,000,000 bytes/second.
Table 2 Nytro XF1230 Card Models
Device Name Model Names Usable Capacity LBAs
Nytro XF1230 XF1230-1A0240 240 GB 468,862,128
Nytro XF1230 XF1230-1A0480 480 GB 937,703,088
Nytro XF1230 XF1230-1A0960 960 GB 1,875,385,008
Nytro XF1230 XF1230-1A1920 1920 GB 3,750,748,848
Table 3 Random Read/Write Input/Output Operations Per Second (IOPS)
Parameter 240 GB 480 GB 960 GB 1920 GB
Random 4 KB Read (IOPS) 96,700 98,000 98,000 98,000
Random 4 KB Write (IOPS) 8,700 15,800 16,800 16,000
Random 8 KB Read (IOPS) 58,000 58,000 58,000 58,000
Random 8 KB Write (IOPS) 4,000 8,000 8,000 8,000
Table 4 Sequential Read/Write Throughput
Parameter 240 GB 480 GB 960 GB 1920 GB
Sequential Read (Sustained) 560MB/s 560MB/s 560MB/s 560MB/s
Sequential Write (Sustained) 306MB/s 505MB/s 490MB/s 445MB/s
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 8
www.Seagate.com Specifications
2.3 Power
The 2.5" drive uses 5 V DC power.
2.3.1 Power Consumption
NOTE Operating, as measured by temperature sensor, SMART Attribute ID 194.
Measured without condensation.
The Shock specification assumes that the SSD is mounted securely with
the input vibration applied to the drive mounting. Stimulus may be
applied in the X, Y or Z axis.
Operating Shock: The drive, as installed for normal operation, operates
error-free while subjected to intermittent shock not exceeding
specification. Shock may be applied in the X, Y, or Z-axis. Shock must not
be repeated more than once every 2 seconds.
Table 5 Operating Voltage
240 GB 480 GB 960 GB 1920 GB
Operating Voltage range
Inrush Current
5 V ± 5%
0.91 A
5 V ± 5%
1.10 A
5 V ± 5%
1.20 A
5 V ±5%
1.60 A
Table 6 Power Consumption
240 GB 480 GB 960 GB 1920 GB
Active Read – Average 2.1 W2.2 W2.2 W2.8 W
Active Write – Average 2.8 W4.2 W4.2 W4.3 W
Active Read – Burst 500 μS Average 2.2 W 2.4 W 2.4 W 3.0 W
Active Write – Burst 500 μS Average 3.2 W 4.8 W 6.1 W 5.7 W
Idle 0.8 W0.8 W0.8 W0.9 W
Table 7 Temperature, Humidity, Shock
Specification Nytro XF1230
Temperature
Operating (case temperature at specific airflow)
Non-Operating
0°C to 70°C
- 40°C to 95°C
Humidity
Operating and Non-Operating 5 to 95%
Shock
Operating and Non-Operating 1500 G at 0.5 ms
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 9
www.Seagate.com Specifications
Non-Operating Shock: The limits of non-operating shock applies to all
conditions of handling and transportation. This includes isolated and
integrated drives. Shock may be applied in the X, Y, or Z-axis.
NOTE The Vibration specification assumes that the SSD is mounted securely with the
input Vibration applied to the drive mounting screws. Stimulus may be applied
in the X, Y or Z axis.
Operating Vibration: The drive, as installed for normal operation, shall
operate error free while subjected to specified vibration not exceeding
specification. Vibration may be applied in the X, Y, or Z-axis.
Non-Operating Vibration: The limits of non-operating vibration shall apply
to all conditions of handling and transportation. This includes both
isolated drive and integrated drives. Vibration may be applied in the X, Y,
or Z-axis.
2.4 Reliability
2.5 Endurance
NOTE Information on endurance:
SSD Endurance is lifetime on finite amount of writes.
DWPD is drive write per day.
Limited Warranty with Media Usage provides coverage for the warranty
period or the endurance usage of the drive.
Table 8 Vibration
Specification Nytro XF1230
Maximum Vibrations
Operating
Non-Operating
20 G (10 to 2000 KHz)
20 G (10 to 2000 KHz)
Table 9 Reliability
Specification Nytro XF1230
Mean time between failures (MTBF) 2 million hours
Uncorrectable Bit Error Rate <1 error in 1017 bits read
Table 10 Endurance
Specification 240 GB 480 GB 960 GB 1920 GB
Endurance Rating 0.5 DWPD 0.6 DWPD 0.67 DWPD 0.67 DWPD
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 10
www.Seagate.com Mechanical Information
3. Mechanical Information
3.1 Dimensions and Weight
Weight: 0.187 lbs, 85 g
Height: Maximum 7 mm
Width: 69.85±0.25
Length: 100±0.25
NOTE All dimensions are in millimeters.
Figure 1 Nytro XF1230 Dimensions
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 11
www.Seagate.com Pin and Signal Descriptions
4. Pin and Signal Descriptions
4.1 Serial ATA Interface Connector
Figure 2 Connector Physical Dimension and Connector Assembly
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 12
www.Seagate.com Pin and Signal Descriptions
4.2 Pin Locations
Figure 3 Layout of 2.5-inch Signal and Power Segment Pins
NOTE The 2.5-inch connector supports built in latching capability.
4.3 Connector Pin Signal Definitions
NOTE Key and spacing separate the signal and power segments.
Table 11 Serial ATA Connector Pin Signal Definitions—2.5-inch Form Factors
Pin Name Definition
S1 Ground Ground
S2 A+
Differential signal pair A and A-
S3 A-
S4 Ground Ground
S5 B-
Differential signal pair B and B-
S6 B+
S7 Ground Ground
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 13
www.Seagate.com Pin and Signal Descriptions
4.4 Power Pin Signal Definitions
NOTE Key and spacing separate the signal and power segments.
Uses 5 V power only, 3.3 V (P1-P3) and 12 V (P13-P15) power are not used.
Pins P1, P2, and P3; Pins P13, P14, and P15 are connected together. They
are not connected internally to the device, and the host may apply
voltage on these pins.
Ground pins are P4, P5, P6, P10, P12.
Signal pins and the rest of the 5V power pins are P8,P9.
Power pins P7, P8, and P9 are internally connected to one another within
the device
4.5 SSD Activity LED Indicator (Optional)
The Nytro XF1230 can support DAS Control function from the SSD module to indicate LED activity of host side.
The device includes a physical pin P11 for connecting device activity LEDs.
The signal provided to indicate activity of the device is a low-voltage and low-current driver intended for efficient
integration into current and future IC manufacturing processes. The signal is not suitable for directly driving an LED
and is first buffered using a circuit external to the device before driving an LED.
For DAS function operation, a Firmware function feature and R das are included as an option.
The DAS function firmware feature generates a Low/High toggle Activity signal input when the SSD is in a busy state
and generates a high Activity signal input when the SSD is in idle mode (Low level: GND, High level: 3.3V).
Using DAS function increases current because of the Activity LED operation.
The DAS Firmware feature is disabled and the R das is opened when the DAS function is not in use.
Table 12 Serial ATA Power Pin Signal Definitions—2.5-inch Form Factors
Pin Function Definition
P1 V33 3.3 V Power; not used
P2 V33 3.3 V Power; not used
P3 V33 3.3 V Power; not used
P4 GND Ground
P5 GND Ground
P6 GND Ground
P7 V5 5 V Power
P8 V5 5 V Power
P9 V5 5 V Power
P10 GND Ground
P11 DAS Device Activity Signal
P12 GND Ground
P13 V12 12 V Power; not used
P14 V12 12 V Power; not used
P15 V12 12 V Power; not used
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 14
www.Seagate.com Pin and Signal Descriptions
Figure 4 Circuit of SSD Activity LED indication
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 15
www.Seagate.com Supported ATA Command List
5. Supported ATA Command List
The Nytro XF1230 complies with ATA-8/ACS-4. All mandatory and many optional commands and features are
supported.
5.1 ATA Feature Set
The following table shows the ATA feature set and commands that the Nytro XF1230 supports.
5.2 ATA Command Description
The following table shows the ATA commands supported.
Table 13 ATA Feature Set
Feature Supported
48-Bit Address feature set Yes
General feature set Yes
Native Command Queuing (NCQ) feature set Yes
Power Management feature set Yes
Security feature set Yes
SMART feature set Yes
Table 14 ATA Command Description
Command Code
(Hex) Command Code
(Hex)
CHECK POWER MODE E5h SMART DISABLE OPERATION B0h/D9h
DATA SET MANAGEMENT 06h SMART ENABLE/DISABLE B0h/D2h
DOWNLOAD MICROCODE 92h SMART ENABLE OPERATION B0h/D8h
EXECUTE DEVICE DIAGNOSTIC 90h SMART EXECUTE OFFLINE B0h/D4h
FLUSH CACHE E7h SMART READ DATA B0h/D0h
FLUSH CACHE EXT EAh SMART READ LOG B0h/D5h
IDENTIFY DEVICE ECh SMART READ THRESHOLD B0h/D1h
IDLE E3h SMART RETURN STATUS B0h/DAh
IDLE IMMEDIATE E1h SMART SAVE ATB VALUES B0h/D3h
INITIALIZE DEVICE PARAMETERS 91h SMART WRITE LOG B0h/D6h
NOP 00h STANDBY E2h
READ BUFFER E4h STANDBY IMMEDIATE E0h
READ DMA C8h WRITE BUFFER E8h
READ DMA EXT 25h WRITE DMA CAh
READ DMA W/O RETRIES C9h WRITE DMA EXT 35h
READ FPDMA QUEUED 60h WRITE DMA FUA EXT 3Dh
READ LOG DMA EXT 47h WRITE DMA WITHOUT RETRIES CBh
READ LOG EXT 2Fh WRITE FPDMA QUEUED 61h
READ MULTIPLE C4h WRITE LOG DMA EXT 57h
READ MULTIPLE EXT 29h WRITE LOG EXT 3Fh
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 16
www.Seagate.com Supported ATA Command List
5.3 Security
The user/master password is supported.
When the device receives a normal SECURITY ERASE UNIT command, the device erases all data blocks including
unallocated (hidden) blocks.
You can download firmware regardless of the security state.
5.3.1 Password Loss
If you lose the user password, you can access the device using the master password. If both passwords are lost, there is
no way to access the device.
READ SECTOR(S) 20h WRITE MULTIPLE C5h
READ SECTOR(S) EXT 24h WRITE MULTIPLE EXT 39h
READ SECTOR(S) W/O RETRY 21h WRITE MULTIPLE FUA EXT CEh
READ VERIFY SECTOR(S) 40h WRITE SECTOR(S) 30h
READ VERIFY SECTOR(S) W/O RETRY 41h WRITE SECTOR(S) EXT 34h
READ VERIFY SECTOR(S) EXT 42h WRITE SECTORS WITHOUT RETRY 31h
RECALIBRATE 10h WRITE UNCORRECTABLE EXT 45h
REQUEST SENSE DATA EXT 0Bh
SECURITY DISABLE PASSWORD F6h
SECURITY ERASE PREPARE F3h
SECURITY ERASE UNIT F4h
SECURITY FREEZE LOCK F5h
SECURITY SET PASSWORD F1h
SECURITY UNLOCK F2h
SEEK 70h
SET FEATURES EFh
SET MULTIPLE MODE C6h
SLEEP E6h
Table 14 ATA Command Description (continued)
Command Code
(Hex) Command Code
(Hex)
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 17
www.Seagate.com SMART Support
6. SMART Support
The Nytro XF1230 supports the SMART Command Set.
6.1 SMART Command Set
The Nytro XF1230 supports the SMART Command Set shown in the following table.
Table 15 SMART Commands
Feature Field Values Command
D0h SMART READ DATA
D1h SMART READ ATTRIBUTE THRESHOLDS
D2h SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
D3h SAVE ATTRIVUTE VALUES
D4h SMART EXECUTE OFF-LINE IMMEDIATE
00h* Execute SMART Off-Line routine
01h* Execute SMART Short Self-test routine (Off-Line)
02h* Execute SMART Extended Self-test routine (Off-Line)
03h* Execute SMART Conveyance self-test routine in off-line mode
04h* Execute SMART Selective self-test routine in off-line mode
7Fh* Abort Off-Line routine
81h* Execute SMART Short Self-test routine (Captive)
82h* Execute SMART Extended Self-test routine (Captive)
83h* Execute SMART Conveyance self-test routine in captive mode
84h* Execute SMART Selective self-test routine in captive mode
D5h SMART READ LOG
D6h SMART WRITE LOG
D8h SMART ENABLE OPERATIONS
D9h SMART DISABLE OPERATIONS
DAh SMART RETURN STATUS
*Low LBA values
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 18
www.Seagate.com SMART Support
6.2 SMART Attributes
The Nytro XF1230 supports the SMART attributes shown in the following table.
Table 16 SMART Attributes
ID Attribute ID Description
1 Raw Read Error Rate Rate of hardware read errors that occurred when reading data from a device
5 Retired Block count Count of number of blocks that have been reallocated, excluding pending
sectors
9 Power on hours The time accumulated while the power is on and operating
12 Drive Power cycle count Count of number of Power Cycles, excluding power mode commands
174 Unexpected Power Loss Count Number of Issue on Unexpected Power Loss
175 Maximum Program Fail Count Maximum number of Program Error Events per die
176 Maximum Erase Fail Count Maximum number of Erase Error Events per die
177 Endurance Used Indicates the number of NAND wear
178 Used Reserved Block Count Number of used reserved blocks
179 Used Reserved Block Count Number of used reserved blocks in SSD
180 End to End Error Detection Rate Number of error detection of the data path between host and NAND in SSD
during last power-on
181 Program Fail Count Number of Error Events on Program (Lifetime)
182 Erase Fail Count Number of Error Events on Erase (Lifetime)
183 SATA Downshift Count Number of times that SATA interface speed reduced
184 End to End Error Detection Count Number of error detection of the data path between host and NAND in SSD of
lifetime
187 Uncorrectable Error Count Uncorrectable Error Count
188 Command Timeout Count Number of total uncompleted commands
189 SSD Health Flags Indicates PLP health status and Thermal Throttling status
190 SATA Error Counter Number of encountered SATA error
194 Temperature (Celsius) Temperature of the SSD
195 ECC Uncorrectable Error Rate Uncorrectable Error Count vs. Total read sector count
199 CRC Error Count Number of Ultra DMA CRC error count (Lifetime)
201 Uncorrectable Soft Read Error Rate (UECC) Number of soft read errors (Count of UECC Error)
204 Soft ECC Correction Rate Count of errors corrected by software ECC[citation needed]
231 SSD Life Left (%) Indicates the approximate SSD life left, in terms of program/erase cycles or Flash
blocks currently available for use
234 Vendor Specific Information of Vendor
241 Lifetime Writes from Host Track the number of user data in GB written by the host
242 Lifetime Reads from Host Track the number of user data in GB read by the host
245 Vendor Specific Information of Vendor
250 NAND Read Retries Indicates the total number of NAND read retires
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 19
www.Seagate.com SMART Support
6.3 SMART Trip
SMART trip (threshold exceeded condition) indicates impending degradation or fault condition. The host can issue a
SMART return status command (B0h/DAh) to communicate the reliability status of the drive. The threshold-exceeded
condition is also checked during drive self tests.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 20
www.Seagate.com Safety, Standards, and Compliance
7. Safety, Standards, and Compliance
7.1 Safety Characteristics
All Seagate SSDs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked with
the supplier’s name or trademark, type, and UL flammability rating. A CB and UL report has been generated for
EN60950.
7.2 Electromagnetic Compliance and Standards
The Nytro XF1230 card is designed to minimize electromagnetic emissions, susceptibility to radio frequency energy,
and the effects of electrostatic discharge. The card carries the CE mark, RCM, Canadian Compliance Statement, KCC,
Taiwan BSMI, Japan VCCI, and FCC Class B, and the card is marked with the FCC Self-Certification logo. The card also
meets the requirements of CISPR Class B.
7.3 Standards
The Nytro XF1230 card is recognized in accordance with UL 60950-1 as tested by UL, CAN/CSA C22.2 No. 60950-1 and
IEC/EN60950-1 as tested by TUV SUD.
7.4 Electromagnetic Compatibility
Electromagnetic Compatibility Notices
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. Seagate is not responsible for any radio or television
interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified
by Seagate Technology LLC. The correction of interferences caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user.
The device is tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 21
www.Seagate.com Safety, Standards, and Compliance
7.5 Electromagnetic Compliance
Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and
C-Tick Marking. The Nytro XF1230 card was tested in a representative system for typical applications and complies
with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. The selected
system represents the most popular characteristics for test platforms. The system configurations include:
Typical current-use microprocessor
Keyboard
Monitor display
Printer
Mouse
Although the test system with this Seagate model complies with the directives and standards, we cannot guarantee
that all systems comply. The computer or server manufacturer or the system integrator must confirm EMC compliance
and provide the appropriate marking for their product.
7.6 Electromagnetic Compliance for the European Union
If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 2004/108/EC as put into place on 20 July 2007.
7.7 Australian RCM
If this model has the RCM Marking it complies with the Australia/New Zealand Standard AS/NZ CISPR22 and meets the
Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Management Agency (SMA).
7.8 Korean KCC
If this model has the Korean Communications Commission (KCC) logo, it complies with KN22, KN 24, and KN61000.
7.9 Taiwanese BSMI
If this model has the Taiwanese certification mark then it complies with Chinese National Standard, CNS13438.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 22
www.Seagate.com Safety, Standards, and Compliance
7.10 China Requirements — China RoHS 2
China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled
Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To
comply with China RoHS 2, we determined this product's Environmental Protection Use Period (EPUP) to be 20 years
in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT
11364-2014.
中国电器电子产品有害物质限制使用管理办法
(Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products _
China RoHS)
产品中有害物质的名称及含量
(Name and Content of the Hazardous Substances in Product)
Table 17 Hazardous Substances
部件名称
Part Name
有害物质
Hazardous Substances
铅
Lead
(Pb)
汞
Mercury
(Hg)
镉
Cadmium
(Cd)
六价铬
Hexavalent
Chromium
(CF (VI))
多溴联苯
Polybrominated
biphenyls (PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷电路板组装
PCBA XOOOOO
机壳
Chassis XOOOOO
本表格依据 SJ/T 11364 的规定编制。
This table is prepared in accordance with the provisions of SJ/T 11364-2014
O：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
O: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of
GB/T26572.
X：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
X: Indicates that the hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit
requirement of GB/T26572.
20
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. D 23
www.Seagate.com Safety, Standards, and Compliance
7.11 Japan VCCI
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a
radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction guide.
7.11.1 Reference Documents
In case of conflict between this document and any reference document, this document takes precedence.
Table 18 Reference Documents
Name
Apr. 2007 SATA-IO Commands for ATA-8
Feb. 2011 Solid-State Drive (SSD) Requirements and Endurance Test Method(JESD218A)
Jul. 2011 Serial ATA Revision 3.1
Jul. 2011 IDEMA (LBA1-03_standard.doc)
Jul. 2012 SOLID-STATE DRIVE (SSD) Endurance Workload(JESD219A)
Jul. 2015 ATA/ATAPI Command Set -4 (ACS-4) Working Draft
Nov. 2011 ISO/IEC 14776-xxxSCSI Block Commands-3 (SBC-3) Standard (T10/1799-D)
Seagate Technology LLC
AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888
EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00
Publication Number: 100797573, Rev. D
August 2016