Table of Contents
Seagate ZA480CV10001 User Manual
Displayed below is the user manual for ZA480CV10001 by Seagate which is a product in the Internal Solid State Drives category. This manual has pages.
Related Manuals
Seagate® BarraCuda® SSD
Product Manual
100835666, Rev. A
June 2018
ZA250CM10002
ZA500CM10002
ZA1000CM10002
ZA2000CM10002
© 2018, Seagate Technology LLC All rights reserved. Publication number: 100835666, Rev. A, June 2018
Seagate Technology reserves the right to make changes to the product(s) or information disclosed herein at any time without notice.
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Nytro, and SeaTools are either trademarks or registered trademarks of
Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report
a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file
format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by
the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice,
product offerings or specifications.
Revision History
Version and Date Description of Changes
Rev A, June 2018 First document release.
Seagate BarraCuda SSD Product Manual, Rev A 3
Contents
Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Models and Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.5 Reliability/Endurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Mechanical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Pin and Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1 Signal Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Power Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Supported ATA Command List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.1 ATA Feature Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2 ATA Command Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. SMART Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.1 SMART ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7. Feature Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1 Flash Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.1 Error Correction Code (ECC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.2 Wear Leveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.3 Bad Block Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.4 TRIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.5 SMART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.1.6 Over Provisioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.1.7 Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.1.8 Thermal Throttling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.1.9 Low Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.1.9.1 DIPM/HIPM/DEVSLP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.2 Advanced Device Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.2.1 Secure Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.2.2 SSD Lifetime Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.2.3 Media Wear Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.2.4 Read Only Mode (End of Life) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3 Adaptive Approach to Performance Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3.1 Throughput . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3.2 Predict and Fetch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7.3.3 SLC Caching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Contents
Seagate BarraCuda SSD Product Manual, Rev A 4
8. Safety, Standards, and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.1 Regulatory Model Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2 Agency and Safety Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2.1 Safety Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2.2 Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2.3 Electromagnetic susceptibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2.4 Electromagnetic compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
8.2.5 European Union (EU) CE Marking Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.2.6 Australian and New Zealand RCM Compliance Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.2.7 Canada ICES-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.2.8 South Korean Certification Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.2.9 Morocco Commodity Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.2.10 Taiwanese BSMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.3 Environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.3.1 European Union Restriction of Hazardous Substance Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.3.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.3.1.2 Substances of Very High Concern (SVHC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8.3.2 China Requirements —China RoHS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8.3.3 Taiwan Requirements — Taiwan RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8.4 Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Seagate BarraCuda SSD Product Manual, Rev A 5
Seagate Technology Support Services
For Internal SSD Support, visit: https://www.seagate.com/support/products/
For information regarding online support and services, visit: http://www.seagate.com/contacts/
For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/
For information regarding data recovery services, visit:
http://www.seagate.com/services-software/seagate-recovery-services/recover/
For Seagate OEM and Distribution partner and Seagate reseller portal, visit: http://www.seagate.com/partners
Seagate BarraCuda SSD Product Manual, Rev A 6
www.seagate.com Introduction
1. Introduction
The Seagate® BarraCuda® SSD is a fast, dependable storage solution for everyday compute applications. The Seagate
BarraCuda SSD offers SATA interface, fully compatible with SATA 3.2 6.0Gbps.
Table 1 The BarraCuda SSD Features
Feature Description
Capacity
(User)
250 GB, 500 GB, 1000 GB, 2000 GB
Certifications,
Eco-Compliance
CE, UL, FCC, BSMI, KCC, Microsoft WHQL, VCCI, CB
RoHS
Dimensions (69.85±0.25) x (100±0.25) x (Max. 7) mm SSD outer case can support suitable Z-height for
various host situations.
Endurance 250 GB 120 Terabyte Writes (TBW)
500 GB 249 TBW
1000 GB 485 TBW
2000 GB 1067 TBW
Endurance rating valid for SSD Life Remaining >
1% (SMART E7h>1).
See Section 2.5, Reliability/Endurance.
Form 2.5-inch Standard SSD
Interface
Compliance
Fully compliant with ATA-8/ACS-3 Standard
Compliant with SATA Revision 3.2
Supported protocol AHCI and ASC2 command set
Compatible with SATA 1.5 Gbps, 3 Gbps, and 6Gbps interfaces
PIO, DMA, UDMA (up to 6 modes, dependent on host) supported
Native Command Queuing (NCQ): up to 32 commands
Data Set Management Command Trim support
NAND Triple-level cell (TLC), BiCS3 3D
Operating
Systems
Windows® 7 (64 bit), 8 (64 bit), 8.1 (64 bit), and Windows 10 (64 bit)
Ubuntu 16.10
Performance
Random
Read: Up to 90,000 IOPS
Write: Up to 90,000 IOPS
Actual performance might vary depending on
use conditions and environment.
See Section 2.2, Performance.
Performance
Sequential
Read: Up to 560 MB/s
Write: Up to 540 MB/s
Actual performance might vary depending on
the capacity, use conditions and environment.
See Section 2.2, Performance.
Power
Consumption
Active mode: < 3,100 mW
Idle mode: < 225 mW
DEVSLP: 5 mW
Results vary with capacity and mode.
See Section 2.3, Power Consumption.
Power Loss
Data Protection
To protect your data, you must send a Standby Immediate command (0xE1h) before you remove
power. The BarraCuda SSD does not provide data protection for a sudden power loss.
Power
Management
2.5 inch: 5 V SATA Supply
Host-initiated power management
Device-initiated power management
HIPM/DEVSLP Mode
Reliability End-to-end data path protection
MTBF: 1.8 million hours
UBER: 1 error in 1016 bits read
Seagate BarraCuda SSD Product Manual, Rev A 7
www.seagate.com Introduction
Shock and
Vibration
Shock
Non-Operating: 1,500 G, at 0.5 ms
See Section 2.4, Environmental
Conditions.
Vibration
Non-Operating: 1.52 GRMS, (20 to 800 Hz,
Frequency)
Temperature
Range
(Operating)
0°C to 70°C
Temperature Sensor (SMART Attribute ID C2h)
Voltage 5V±5%
Warranty Five years, or when the device reaches Host TBW, whichever happens first. Endurance rating valid for SSD
Life Remaining > 1% (SMART E7h>1).
Weight 50 g, 1.76 Oz ±5%
Table 1 The BarraCuda SSD Features (continued)
Feature Description
Seagate BarraCuda SSD Product Manual, Rev A 8
www.seagate.com Specifications
2. Specifications
2.1 Models and Capacity
NOTE About capacity:
Sector Size: 512 Bytes
User-addressable LBA count = (97696368) + (1953504 x (Desired Capacity
in Gb-50.0)) From International Disk Drive Equipment and Materials
Association (IDEMA) (LBA1-03_standard.doc)
2.2 Performance
NOTE About performance:
Fresh out of box (FOB) performance obtained on newly formatted drive.
Performance may vary based on the SSD’s firmware version, system
hardware, and configuration.
Performance is based on CrystalDiskMark v.5.2.1 ×64 on Windows 10 host.
Table 2 Models and Capacity
Model Names User Capacity
ZA250CM10002 250 GB
ZA500CM10002 500 GB
ZA1000CM10002 1000 GB
ZA2000CM10002 2000 GB
Table 3 Random and Sequential Read and Write Performance
Parameter 250GB 500 GB 1000 GB 2000 GB
Sequential Read MB/s 560 560 560 560
Sequential Write MB/s 530 535 540 540
Random Read (IOPS) 90,000 90,000 90,000 90,000
Random Write (IOPS) 90,000 90,000 90,000 90,000
Seagate BarraCuda SSD Product Manual, Rev A 9
www.seagate.com Specifications
2.3 Power Consumption
NOTE About power consumption:
The average value of power consumption is based on 100% conversion
efficiency.
The measured power voltage is 5 V.
Samples used BiCS3 3D Toggle TLC NAND flash and were measured under
ambient temperature.
Sequential Read/Write is measured while testing 4000 MB five times by
CrystalDiskMark.
Power Consumption can differ according to flash configuration and
platform.
2.4 Environmental Conditions
NOTE Temperature is measured without condensation. Operating mode
temperature is measured by temperature sensor, SMART Attribute C2h.
NOTE Shock and vibration results assume that the SSD is mounted securely with the
input vibration applied to the SSD mounting. These specifications do not cover
connection issues that may result from testing at this level. The measured
specification is in root mean square (RMS) form.
Table 4 Power Consumption
250 GB 500 GB 1000 GB 2000 GB
Read (mW) 2,250 2,250 2,450 2,600
Write (mW) 2,600 2,600 2,800 3,100
Idle (mW) 185 192 221 225
Slumber (mW) 75 78 109 115
DEVSLP (mW) 5 5 5 5
Table 5 Temperature, Humidity, Shock
Specification Value
Temperature
Operating (case temperature at specific airflow)
Non-operating
0°C to 70°C
-40°C to 85°C
Humidity
Operating
Non-operating (storage)
90%
93%
Shock
Non-operating 1,500 G, duration 0.5 ms
Vibration
Non-operating 1.52 GRMS, (20Hz to 80Hz, Frequency)
Seagate BarraCuda SSD Product Manual, Rev A 10
www.seagate.com Specifications
Non-operating Shock. The limits of non-operating shock applies to all
conditions of handling and transportation. This includes both isolated
SSD and integrated SSDs. Shock may be applied in the X, Y, or Z-axis.
Non-Operating Vibration. The limits of non-operating vibration shall
apply to all conditions of handling and transportation. This includes both
isolated SSD and integrated SSDs. Vibration may be applied in the X, Y, or
Z-axis.
2.5 Reliability/Endurance
NOTE About endurance:
The SSD achieves the specified MTBF in an operational environment that
complies with the operational temperature range specified in this manual.
Operating temperatures are measured by temperature sensor, SMART
Attribute ID C2h.
Endurance rating valid for SSD Life Remaining > 1% (SMART E7h>1).
Endurance is characterized while running Client JESD219A workload (per
JESD218A specification).
Table 6 Reliability/Endurance
Specification Value
Mean time between failures (MTBF) 1.8 million hours
Bit Error Rate 1 error in 1016 bits read
Endurance 250 GB: 120 TBW
500 GB: 249 TBW
1000 GB: 485 TBW
2000 GB 1,067 TBW
Seagate BarraCuda SSD Product Manual, Rev A 11
www.seagate.com Mechanical Information
3. Mechanical Information
3.1 Dimensions and Weight
Weight: 50 g, 1.76 Oz +/- 5%
Height: Maximum, 7 mm
Width: 69.85 mm±0.25 mm
Length: 100 mm+0.35/-0.15 mm
Figure 1 BarraCuda SSD Enclosure
Seagate BarraCuda SSD Product Manual, Rev A 12
www.seagate.com Pin and Signal Descriptions
4. Pin and Signal Descriptions
4.1 Signal Pin Definitions
NOTE Key and spacing separate the signal and power segments.
4.2 Power Pin Definitions
NOTE About Power Pin Signal Definitions:
Key and spacing separate the signal and power segments.
Uses 5 V power only; 3.3 V (P1-P2) and 12 V (P13-P15) power are not used.
Table 7 Serial ATA Connector Pin Signal Definitions
Pin Name Definition
S1 Ground Ground
S2 A+ Differential signal pair A+ and A-
S3 A-
S4 Ground Ground
S5 B- Differential signal pair B- and B+
S6 B+
S7 Ground Ground
Table 8 Power Pin Definitions
Pin Function Definition
P1 not used Not Used (3.3 V)
P2 V33 Not Used (3.3 V)
P3 DEVSLP SATA PHY Power Control
P4 GND Ground
P5 GND Ground
P6 GND Ground
P7 V5 5 V Power, Precharge
P8 V5 5 V Power
P9 V5 5 V Power
P10 GND Ground
P11 DAS GPIO for debug
P12 Reserved Reserved
P13 not used Not Used (12 V pre-charge)
P14 V12 Not Used (12 V)
P15 V12 Not Used (12 V)
Seagate BarraCuda SSD Product Manual, Rev A 13
www.seagate.com Supported ATA Command List
5. Supported ATA Command List
The BarraCuda SSDcomplies with ATA-8/ACS-3. All mandatory and many optional commands and features are
supported.
5.1 ATA Feature Set
The following table summarizes the ATA feature set and commands that the BarraCuda SSD supports.
5.2 ATA Command Description
The following table shows the ATA commands supported.
Table 9 ATA Feature Set
Feature Supported
48-Bit Address feature set Yes
General feature set Yes
Native Command Queuing (NCQ) feature set Yes
Power Management feature set Yes
Security feature set Yes
SMART feature set Yes
Table 10 ATA Command Description
Op-Code Command Description Op-Code Command Description
00h —NOP 60h ——
Read FPDMA Queued
06h —Data Set Management 61h ——
Write FPDMA Queued
10h —Recalibrate 70h ——
Seek
20h —Read Sectors 90h ——
Execute Device Diagnostic
21h —Read Sectors without Retry 91h ——
Initialize Device Parameters
24h —Read Sectors EXT 92h ——
Download Microcode
25h —Read DMA EXT 93h ——
Download Microcode DMA
27h —Read Native Max Address EXT B0h ——
SMART
29h —Read Multiple EXT B0h D0h —SMART READ DATA
2Fh —
Read Log EXT
B0h D1h —
SMART READ DATA ATTRIBUTE
THRESHOLD
30h —
Write Sectors
B0h D2h —
SMART ENABLE/DISABLE ATTRIBUTE
AUTOSAVE
31h —Write Sectors without Retry B0h D3h —SMART SAVE ATTRIBUTE VALUES
Seagate BarraCuda SSD Product Manual, Rev A 14
www.seagate.com Supported ATA Command List
34h —Write Sectors EXT B0h D4h —SMART EXECUTE OFF-LINE IMMEDIATE
35h —Write DMA EXT B0h D5h —SMART READ LOG
37h —Set Native Max Address EXT B0h D6h —SMART WRITE LOG
39h —Write Multiple EXT B0h D8h —SMART ENABLE OPERATIONS
3Dh —Write DMA FUA EXT B0h D9h —SMART DISABLE OPERATIONS
3Fh —Write Long EXT B0h DAh —SMART RETURN STATUS
40h —
Read Verify Sectors
B0h DBh —
SMART ENABLE/DISABLE AUTOMATIC
OFF-LINE
41h —Read Verify Sectors without Retry B1h —DEVICE CONFIGURATION OVERLAY
42h —Read Verify Sectors EXT B1h C0h —DEVICE CONFIGURATION RESTORE
45h —Write Uncorrectable EXT B1h C1h —DEVICE CONFIGURATION FREEZE LOCK
47h —Read Log DMA EXT B1h C2h —DEVICE CONFIGURATION IDENTIFY
57h —Write Log DMA EXT B1h C3h —DEVICE CONFIGURATION SET
B1h C4h
DEVICE CONFIGURATION IDENTIFY
DMA ECh ——
Identify Device
B1h C5h DEVICE CONFIGURATION SET DMA EFh ——
Set Features
C4h —Read Multiple EFh 02h —Enable 8-bit PIO transfer mode
C5h —
Write Multiple
EFh 03h —
Set transfer mode based on value in
Count field
C6h —Set Multiple Mode EFh 05h —Enable advanced power management
C8h —Read DMA EFh 10h —Enable use of Serial ATA feature
C9h —
Read DMA without Retry
EFh 10h 02h
Enable DMA Setup FIS Auto-Activate
optimization
CAh —
Write DMA
EFh 10h 03h
Enable Device-initiated interface power state
(DIPM) transitions
CBh —
Write DMA without Retry
EFh 10h 06h
Enable Software Settings Preservation
(SSP)
Table 10 ATA Command Description (continued)
Op-Code Command Description Op-Code Command Description
Seagate BarraCuda SSD Product Manual, Rev A 15
www.seagate.com Supported ATA Command List
CEh —
Write Multiple FUA EXT
EFh 10h 07h
Enable Device Automatic Partial to
Slumber transitions
E0h —Standby Immediate EFh 10h 09h Enable Device Sleep
E1h —Idle Immediate EFh 55h —Disable read look-ahead feature
E2h —Standby EFh 66h —Disable reverting to power-on defaults
E3h —Idle EFh 82h —Disable write cache
E4h —Read Buffer EFh 85h —Disable advanced power management
E5h —Check Power Mode EFh 90h —Disable use of Serial ATA feature set
E6h —
Sleep
EFh 90h 02h
Disable DMA Setup FIS Auto-Activate
optimization
E7h —
Flush Cache
EFh 90h 03h
Disable Device-initiated interface power state
(DIPM) transitions
E8h —
Write Buffer
EFh 90h 06h
Disable Software Settings Preservation
(SSP)
E9h —
Read Buffer DMA
EFh 90h 07h
Disable Device Automatic Partial to
Slumber transitions
EAh —Flush Cache EXT EFh 90h 09h Disable Device Sleep
EBh —Write Buffer DMA EFh AAh —Enable read look-ahead feature
EFh CCh Enable reverting to power-on
defaults F4h ——
Security Erase Unit
F1h —Security Set Password F5h ——
Security Freeze Lock
F2h —Security Unlock F6h ——
Security Disable Password
F3h —Security Erase Prepare F8h ——
Read Native Max Address
Table 10 ATA Command Description (continued)
Op-Code Command Description Op-Code Command Description
Seagate BarraCuda SSD Product Manual, Rev A 16
www.seagate.com SMART Support
6. SMART Support
The BarraCuda SSD supports the SMART command set.
6.1 SMART ID
The following table lists SMART IDs and Descriptions.
Table 11 SMART Attribute IDs and Descriptions
Description
0 1 2 3 4 5 6 7 8 9 10 11
Threshold
ID Flag Value Worse DATA
Number of Accumula-
tion of
Uncorrectable Error
01h 0Bh 00h 64h 64h UECC error count
from Host
0 0 0 0 0 32h
Power-On hours Count 09h 12h 00h 64h 64h Power on hour 0 0 0 0 0 00h
Drive Power Cycle Count 0Ch 12h 00h 64h 64h Power on/off cycles 0 0 0 00h
Spare Blocks Available 10h 12h 00h 64h 64h Spare Blocks
Available by
plane
0 0 0 0 0 00h
Remaining Spare Blocks 11h 12h 00h 64h 64h Remaining Spare
Blocks by
plane
0 0 0 0 0 00h
SATA PHY Error Count A8h 12h 00h 64h 64h SATA PHY error count 0 0 0 00h
Bad Block Count (Early /
Later)
AAh 03h 00h NoteaEarly Bad Block
count by all
plane
0 0 Later Bad
Block count
by all plane
00Ah
Erase count (average,
max, erase count)
ADh 12h 00h 64h 64h Max Erase Count
Average
Erase
Count
Least Erase
Count
0 00h
Unexpected Power Loss
count
AEh 12h 00h 64h 64h Number of accidental power loss
count
0 0 0 00h
Wear Range delta B1h 00h 00h 00h 00h Noteb0 0 0 0 0 0 00h
Unexpected Power Loss
Count
C0h 12h 00h 64h 64h number of accidental power loss
count
0 0 0 00h
Temperature
(only Toshiba or thermo
sensor embedded)
C2h 23h 00h 128-
Curre nt
Temp
128-
Highest
value
Current Temp Lowest
Temp
Highest
Temp
039h
Seagate BarraCuda SSD Product Manual, Rev A 17
www.seagate.com SMART Support
Number of accumula-
tion CRC error
(read/write data FIS CRC
error)
DAh 0Bh 00h 64h 64h CRC Error Count 0 0 0 32h
SSD life remaining E7h 13h 00h 64h 64h Notec0000Thro
ttlin
g
level
000h
Read Failure Block Count E8h 13h 00h 64h 64h Flash Read Fail Count Raw
Read
Error
Rate
00 00h
Lifetime Writes to Flash
(G Unit)
E9h 0Bh 00h 64h 64h Lifetime Writes to Flash by GByte 0 00h
Lifetime Writes to Flash
(Sector Unit)
EBh 0Bh 00h 64h 64h Lifetime Writes to Flash by Sector 0 00h
Host Writes (G Unit) F1h 12h 00h 64h 64h Lifetime Writes from Host by Gbyte 0 00h
Host Reads (G Unit) F2h 12h 00h 64h 64h Lifetime Reads from Host by Gbyte 0 00h
a. Bad Block Count (Early / Later) ID170. Value = (Remaining Spare Blocks by plane)/(Spare Blocks Available by plane) *100. This formula calculates percentage
of spare block. Value is between 100 and 0.
b. Wear Range Delta ID 177. Value = (max erase count - least erase count) / (P-E Cycle) *100 (percentage).
c. SSD Life Remaining ID 231. Value = 100 - ((average erase count / Rated PE Cycle) * 100).
Table 11 SMART Attribute IDs and Descriptions (continued)
Description
0 1 2 3 4 5 6 7 8 9 10 11
Threshold
ID Flag Value Worse DATA
Seagate BarraCuda SSD Product Manual, Rev A 18
www.seagate.com Feature Details
7. Feature Details
7.1 Flash Management
7.1.1 Error Correction Code (ECC)
Flash memory cells deteriorate with use, which might generate random bit errors in the stored data. The BarraCuda
SSD applies the BCH ECC algorithm to detect and correct 120bits/2K Byte errors occur during read process, to make
sure data is read correctly, and to protect data from corruption.
7.1.2 Wear Leveling
NAND flash devices can undergo only a limited number of program/erase cycles. Commonly, areas of the flash media
are not used evenly. If some areas are updated more frequently than others, this reduces the lifetime of the device.
Wear Leveling extends the life of the NAND Flash by evenly distributing write and erase cycles across the media.
Seagate’s advanced Wear Leveling algorithm spreads the flash usage throughout the whole flash media area.
Implementing dynamic and static Wear Leveling algorithms improves the life expectancy of the NAND flash.
7.1.3 Bad Block Management
Bad blocks do not function properly and they can contain more invalid bits. This can make stored data unstable and
bad block reliability is not guaranteed. Blocks identified and marked as bad by the manufacturer are called “Early Bad
Blocks”. Bad blocks that develop during the lifespan of the Flash are called “Later Bad Blocks”. Seagate’s bad block
management algorithm detects the factory-produced bad blocks and manages bad blocks that appear with use. This
practice prevents data from being stored in bad blocks and improves data reliability
7.1.4 TRIM
The TRIM feature improves the read/write performance and speed of SSDs. SSDs cannot overwrite existing data, so
the available space becomes smaller with each data block use. The TRIM command tells the SSD (through the
operating system) which data blocks can be removed permanently because they are no longer in use. The SSD erases
these unused data blocks.
7.1.5 SMART
SMART, stands for Self-Monitoring, Analysis, and Reporting Technology, is an open standard that allows an SSD to
automatically detect its health and report potential failures. When SMART records a failure, users can replace the drive
to prevent unexpected outage or data loss. SMART can also inform users of impending failures while there is still time
to copy data to another device.
Seagate BarraCuda SSD Product Manual, Rev A 19
www.seagate.com Feature Details
7.1.6 Over Provisioning
Over Provisioning (OP) preserves an additional area beyond user capacity in a SSD, which is not visible to users and
cannot be used by them. With Over Provisioning, the performance and IOPS (Input/Output Operations per Second)
are improved by providing the controller additional space to manage P/E cycles, which enhances the reliability and
endurance as well. Moreover, the write amplification of the SSD becomes lower when the controller writes data to the
flash.
7.1.7 Firmware Upgrade
Firmware is a set of instructions on how the device communicates with the host. Firmware can be upgraded when
new features are added, compatibility issues are fixed, or read/write performance gets improved.
7.1.8 Thermal Throttling
The purpose of thermal throttling is to prevent any components in a SSD from over-heating during read and write
operations. BarraCudaSSD is designed with an on-board thermal sensor and with its accuracy, firmware can apply
different levels of throttling to achieve the purpose of protection efficiently and proactively via SMART 12 reading.
7.1.9 Low Power Management
7.1.9.1 DIPM/HIPM/DEVSLP Mode
SATA interfaces contain two low power management states for power saving: Partial and Slumber modes. For Partial
mode, the device has to resume to full operation within 10 microseconds, whereas the device will spend 10
milliseconds to become fully operational in the Slumber mode. SATA interfaces allow low power modes to be initiated
by Host (HIPM, Host Initiated Power Management) or Device (DIPM, Device Initiated Power Management). As for HIPM,
Partial or Slumber mode can be invoked directly by the software. For DIPM, the device will send requests to enter
Partial or Slumber mode.
7.2 Advanced Device Security Features
7.2.1 Secure Erase
Secure Erase is a standard ATA command and it writes all of “0xFF” to fully wipe all the data on hard drives and SSDs.
When this command is issued, the SSD controller erases its storage blocks and returns to its factory default settings
7.2.2 SSD Lifetime Management
Terabytes Written (TBW)
TBW (Terabytes Written) measures the lifespan of the SSD. This measurement represents the amount of data written
to the device. To calculate the TBW of a SSD, use the following equation:
TBW = [(NAND Endurance) x (SSD Capacity)] / [WAF]
NAND Endurance: NAND endurance refers to the P/E (Program/Erase) cycle of a NAND flash.
SSD Capacity: The SSD capacity is the specific capacity in total of a SSD.
Seagate BarraCuda SSD Product Manual, Rev A 20
www.seagate.com Feature Details
WAF: Write Amplification Factor (WAF) is a numerical value representing the ratio between the amount of data that a
SSD controller needs to write and the amount of data that the host’s flash controller writes. A better WAF, which is near
1, guarantees better endurance and lower frequency of data written to flash memory.
TBW in this document is based on JEDEC 218/219 workload.
7.2.3 Media Wear Indicator
Actual life indicator reported by SMART Attribute 231 (E7h) Life Remaining by percentage, recommends User to
replace drive before reaching 0%.
7.2.4 Read Only Mode (End of Life)
When the SSD is aged by program/erase cycles, media wear-out may cause increasing numbers of bad blocks. When
the number of usable good blocks falls outside a defined usable range, the drive notifies the host through AER event
and Critical Warning to enter Read Only Mode to prevent further data corruption. When this happens, the user should
replace the SSD with another one immediately.
7.3 Adaptive Approach to Performance Tuning
7.3.1 Throughput
Based on the available space of the disk, the BarraCuda SSD regulates the read/write speed and manages the
performance of throughput. When there is a lot of space, the firmware continuously performs read/write actions.
There is no need yet to implement garbage collection to allocate and release memory to accelerate the read/write
processing and improve performance. When there is less available space, the SSD slows down the read/write
processing and implements garbage collection to release memory.
7.3.2 Predict and Fetch
When the Host tries to read data from the SSD, the SSD performs only one read action after receiving one command.
However, the BarraCuda SSD applies Predict and Fetch to improve the read speed. When the host issues sequential
read commands to the SSD, the SSD automatically expects that the following is also read commands. Therefore,
before receiving the next command, flash has already prepared the data. This accelerates data processing time, and
the host needs to wait less time to receive data.
7.3.3 SLC Caching
The BarraCuda SSD firmware design adopts static caching to deliver better performance, endurance and user
experience.
Seagate BarraCuda SSD Product Manual, Rev A 21
www.seagate.com Safety, Standards, and Compliance
8. Safety, Standards, and Compliance
Each Hard Drive and Solid State Drive ("device") has a product label that includes certifications that are applicable to
that specific drive. The following information provides an overview of requirements that may be applicable to the
drive.
8.1 Regulatory Model Numbers
The following regulatory model number represents all features and configurations within the series:
STA012
8.2 Agency and Safety Certifications
8.2.1 Safety Certification
These products are certified to meet the requirements of UL/cUL 60950-1, EN 60950-1, and may also include, IEC
62368, UL 62368 and EN 62368.
8.2.2 Electromagnetic Compatibility
The device, as delivered, is designed for system integration and installation into a suitable enclosure prior to use. The
drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules.
The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides
reasonable shielding. The device is capable of meeting the Class B limits of the FCC Rules and Regulations of the
Canadian Department of Communications when properly packaged; however, it is the user’s responsibility to assure
that the device meets the appropriate EMI requirements in their system.
8.2.3 Electromagnetic susceptibility
The device as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the
responsibility of those integrating the drive within their systems to perform those tests required and design their
system to ensure that equipment operating in the same system as the drive or external to the system does not
adversely affect the performance of the device.
8.2.4 Electromagnetic compliance
Seagate uses an independent laboratory to confirm compliance with the EMC directives and standards. The device
was tested in a representative system for typical applications.Although the test system with this Seagate model
complies with the directives/standards, we cannot guarantee that all systems will comply. The computer
manufacturer or system integrator shall confirm EMC compliance and provide the appropriate marking for their
product.
Seagate BarraCuda SSD Product Manual, Rev A 22
www.seagate.com Safety, Standards, and Compliance
8.2.5 European Union (EU) CE Marking Requirements
Devices that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2014/30/EU). Testing is performed to the levels specified by the product standards for
Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012, Class B and the immunity
levels are defined by EN 55024.
The devices also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.
Although CE-marked Seagate devices comply with all relevant regulatory requirements and standards for the drives,
Seagate cannot guarantee that all system-level products into which the devices are installed comply with all
regulatory requirements and standards applicable to the system-level products. The device is designed for operation
inside a properly designed system (e.g., enclosure designed for the device), with properly shielded I/O cable (if
necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm
EMC compliance and provide CE marking for the system-level products.
For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2), see Section 8.3.1, European Union Restriction of
Hazardous Substance Law, on page 23.
8.2.6 Australian and New Zealand RCM Compliance Mark
If the device has the RCM marking, it complies with the Australia/New Zealand Standard AS/NZ CISPR32 and meets
the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communications and Media
Authority (ACMA).
8.2.7 Canada ICES-003
If the device has the ICES-003 Issue 6 marking, it complies with the requirements of ICES tested per ANSI C63.4-2014 or
CAN/CSA-CISPR 22-10.
8.2.8 South Korean Certification Mark
If the device has the Korean Communications Commission (KCC) logo, they comply with KN32 and KN35.
8.2.9 Morocco Commodity Mark
Seagate drives are tested for compliance and comply with the European Union (EU) Electromagnetic Compatibility
(EMC) Directive 2014/30/EU and the Low Voltage Directive (LVD) 2014/35/EU. Accordingly, the drives also meet the
requirements of Morocco's Order of the Minister of Industry, Trade, Investment and Digital Economy No. 2574-14 of 29
Ramadan 1436 (16 July 2015) on electromagnetic compatibility of equipment.
For devices with the Morocco Mark, Seagate has added the Moroccan Commodity Mark to the devices provided to the
OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the
OEM's finished system-level product by an end user. The Customer Kits are considered 'devices' under Morocco's
Order of the Minister of Industry, Trade, Investment and Digital Economy No. 2574-14 of 29 Ramadan 1436 (16 July
2015) on electromagnetic compatibility of equipment.
Seagate BarraCuda SSD Product Manual, Rev A 23
www.seagate.com Safety, Standards, and Compliance
8.2.10 Taiwanese BSMI
Devices with the Taiwanese certification mark comply with Chinese National Standard, CNS13438 (2006.6) and CNS
15663 (2013.7).
For compliance with the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) RoHS requirements, see
Section 8.3.3, Taiwan Requirements — Taiwan RoHS, on page 25.
8.3 Environmental protection
Seagate designs its products to meet environmental protection requirements worldwide, including regulations
restricting certain chemical substances.
8.3.1 European Union Restriction of Hazardous Substance Law
8.3.1.1 Restriction of Hazardous Substances in Electrical and Electronic Equipment
Seagate devices are designed to be compliant with the European Union RoHS "Recast" Directive 2011/65/EU (RoHS 2)
as amended by Directive (EU) 2015/863. The RoHS2 restricts the use of certain hazardous substances such as Lead,
Cadmium, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether
(PBDE), BisBis(2-Ethylhexyl) phthalate (DEHP), Benzyl butyl phthalate (BBP), Dibutyl phthalate (DBP), and Diisobutyl
phthalate (DIBP) in electrical and electronic equipment (EEE).
8.3.1.2 Substances of Very High Concern (SVHC)
The European Union REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC)
1907/2006 regulates chemicals shipped into and used in Europe. A number of parts and materials in Seagate products
are procured from external suppliers. We rely on the representations of our suppliers regarding the presence of REACH
substances in these articles and materials. Our supplier contracts require compliance with our chemical substance
restrictions, and our suppliers document their compliance with our requirements by providing full-disclosure material
content declarations that disclose inclusion of any REACH-regulated substance in such articles or materials.
Product-specific REACH declarations are available upon request through your Seagate Sales Representative.
Seagate BarraCuda SSD Product Manual, Rev A 24
www.seagate.com Safety, Standards, and Compliance
8.3.2 China Requirements —China RoHS 2
China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July
1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical
and Electronic Products. To comply with China RoHS 2, Seagate determines this product's
Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the
Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014.
Table 12 China - Hazardous Substances
部件名称
Part Name
有害物质
Hazardous Substances
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板组装
PCBA XOO O O O
机壳
Chassis XOO O O O
本表格依据 SJ/T 11364 的规定编制。
This table is prepared in accordance with the provisions of SJ/T 11364-2014
O：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
O：Indicates that the hazardous substance contained in all of the homogeneous materials for this
part is below the limit requirement of GB/T26572.
X：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
X：Indicates that the hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T26572.
20
Seagate BarraCuda SSD Product Manual, Rev A 25
www.seagate.com Safety, Standards, and Compliance
8.3.3 Taiwan Requirements — Taiwan RoHS
Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard
CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment.
Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective
January 1, 2018. This product is Taiwan RoHS compliant.
The following table meets the Section 5 “Marking of presence” requirements.
8.4 Reference Documents
In case of conflict between this document and any reference document, this document takes precedence.
Table 13 Taiwan - Restricted Substances
設備名稱：固態硬碟，
Equipment Name: 2.5 inch SSDs
型號（型式）
Type Designation (Type)
單元
Unit
限用物質及其化學符號
Restricted Substance and its chemical symbol
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
Chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
快閃記憶體
Flash Memory OOOOOO
連接器
Connector OOOOOO
外殻
Product Cover OOOOOO
印刷電路板總成
PCB Assembly —OOOOO
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2. "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3. "—" indicates that the restricted substance corresponds to the exemption.
Table 14 Reference Documents
Date Title
Apr. 2007 SATA-IO Commands for ATA-8
Feb. 2011 Solid-State Drive (SSD) Requirements and Endurance Test Method(JESD218A)
Jul. 2011 Serial ATA Revision 3.1
Jul. 2011 IDEMA (LBA1-03_standard.doc)
Jul. 2012 SOLID-STATE DRIVE (SSD) Endurance Workload(JESD219A)
Oct. 2013 ATA/ATAPI Command Set -2 (ACS-3) Revision 5
Seagate Technology LLC
AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888
EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00
Publication Number: 100835666, Rev. A
June, 2018