Sony HZC-PRV50W User Manual
Displayed below is the user manual for HZC-PRV50W by Sony which is a product in the Software Licenses/Upgrades category. This manual has pages.
Related Manuals
HDC Series HDC-3500, HDC-3100, HDC-3170
2
Over the years, Sony has established a powerful solution lineup for HD studio
operations with its HDC Series cameras along with a wide range of accessories to
enhance your creative options.
Sony’s flagship HDC Series cameras have been accepted as a worldwide standard,
using cutting-edge technologies to realize excellent picture quality.
Now Sony proudly introduces new models designed to boost creativity with higher
levels of performance along with the flexibility of continued interchangeability with
existing models. The new HDC-3500, HDC-3100, HDC-3170, and point-of-view (POV)-style
camera HDC-P50 are powerful tools that truly inspire innovation and enable your
creative vision.
In addition, for even higher levels of creativity, Sony offers the HDC-4300 super-motion
camera with a 4K capability. Along with various camera head choices, all HDC Series
cameras also boast various options such as a stunning 7-inch OLED viewfinder
and a large lens adaptor that enables rapid attachment without fine
adjustment.
With their field-proven high reliability, all HDC Series cameras are stunning
acquisition tools, ideal for a broad range of HD production applications.
Sony HD Cameras –
Open up a World of Creativity with this New Performance Benchmark
3
HDC-3170
Digital triax interface
1080/50i, 1080/59.94i
720/50p, 720/59.94p
1080/50p, 1080/59.94p
HDC Series Multi-Format HD Camera System
Portable Cameras
HDC-3500
Optical-fiber interface
1080/50i, 1080/59.94i
1080/23.98p*2, 1080/24p*2, 1080/25p*2
1080/29.97p*2, 1080/50p*3, 1080/59.94p*3
720/50p, 720/59.94p, 1080/100i*4
1080/119.88i*4, 720/100p*4, 720/119.88p*4
UHD/50p*3*5, UHD/59.94p*3*5
HDC-3100
Optical-fiber interface
1080/50i, 1080/59.94i
720/50p, 720/59.94p
1080/23.98p*2, 1080/24p*2, 1080/25p*2
1080/29.97p*2, 1080/50p*3, 1080/59.94p*3
UHD/50p*3*5, UHD/59.94p*3*5
HDC-3500
*2 Optional HZC-PSF50 software is required. *3 Optional HZC-PRV50 software is required. *4 Double-speed acquisition format for slow-motion
*5 Optional HKCU-UHD30 Board is required to be installed into HDCU-3100.
HDC-
Sony has newly developed a powerful imaging device
specifically for the HDC-. This offers high sensitivity of
F (at /.p) or F (at /p) and a superior
signal-to-noise ratio.
The HDC-* offers enhanced, excellent picture quality
through new cutting-edge technologies. The first of these is
a newly developed K CMOS imaging device equipped with
global shutter technology. And the second is a newly
developed dedicated signal processor. In addition, the HDC-
can be upgraded with optional software licenses to add
required functions such as capturing progressive signals,
progressive segmented frame (PsF) signals, and double-
speed acquisition for exquisite picture-quality slow motion.
The HDC- is operated through fiber transmission as
standard. It also has an exchangeable side panel interface
and the HKC-CN enhances easy exchangeable operation.
To satisfy your varying requirements with the HDC-,
Sony provides exchangeable outside panels – the HKC-FB
(for fiber transmission) and the HKC-TR (for triax
transmission), as well as the HDC-H which does not have
a transmission function. You can also choose the HDCU-
Camera Control Unit for fiber operation and the HDCU-
for triax operation.
HDC-, HDC-
The HDC-* offers an optical fiber transmission
capability as standard. Meanwhile, the HDC- offers a
digital triax transmission capability. Both deliver high
sensitivity of F (at /.i) or F (at /i) so you
can select your model according to the signal wiring setup
– optical fiber or triax – in the expected stadium.
* Please refer to the table on the left to see supported formats for each camera head.
4
Highly Acclaimed 4K CMOS Sensor with Global Shutter
Technology (for the HDC-3500)
Based on Sony’s cutting-edge imaging device
technology and the latest on-chip lens structure,
this 2/3-inch-type 4K CMOS sensor offers high
sensitivity of F10 (at 1080/59.94p) and
F11 (at 1080/50p) at 2,000 lx and a superior
signal-to-noise ratio even without digital noise suppression.
In addition, there is a wide variety of available output formats including
1080/59.94i, 1080/50i, 1080/23.98p*1, 1080/24p*¹, 1080/25p*1, 1080/29.97p*1,
and 1080/59.94p*² or 1080/50p*². These formats are beyond HD picture quality
made from 4K capturing images.
Double-speed acquisition for excellent slow-motion picture quality is also
available in 1080/119.88i*³, 1080/100i*³, 720/119.88p*³, and 720/100p*³ modes.
What’s more, installing the optional HKCU-UHD30 4K HDR Processor Board to the
HDCU-3100 enables the CCU to transmit ultra-high-bit-rate (UHB) signals
automatically and output 4K signals (UHD/59.94p or UHD/50p)*2.
*1 Optional HZC-PSF50 software is required for the HDC-3500.
*2 Optional HZC-PRV50 software is required for the HDC-3500.
*3 Optional HZC-DFR50 software is required for the HDC-3500.
State-Of-The-Art Evolving Digital Signal Processor
The DSP LSI developed for the HDC-3500 supports 1080/59.94p and 1080/50p
progressive formats, making full use of the high-clarity images captured by the
CMOS sensor. You can also capture
UHD/59.94p or UHD/50p 4K resolution
images and achieve high-speed signal
processing – the capabilities that are
needed most for compact operation.
Optical Fiber Transmission
HDC-3500 and HDC-3100 cameras offer an optical fiber transmission capability as
standard, enabling you to shoot in various capturing formats.
These cameras are equipped with an SMPTE-standard optical fiber interface for
connecting the associated camera control unit (the HDCU-3100 or HDCU-2000).
While achieving exceptional quality, these cameras can also transmit all digital
bi-directional video and audio signals, a control line, and a prompter line over
extremely long distances.
Next-Generation Digital Triax Transmission
With these newly developed third-generation digital triax-based systems, you
can transmit detailed high-quality images over a long distance – up to 1,800
meters (5,904 feet)* with a ø14.5 mm triax cable.
*4 Maximum cable length varies with camera system configuration.
Network TRUNK*5
The network TRUNK function (LAN port) allows for data transmission between
the camera and the CCU at up to 1 Gbps. This supports new system
configurations that are being used with various IP-based products.
*5 This function can only be used with the fiber system.
Servo-Controlled ND and CC Filters*
The HDC-3500 is equipped with dual optical filter wheels for ND (neutral density)
and CC (color correction) which can be remotely controlled by any remote control
panel (RCP) or master setup unit (MSU), as well as directly controlled by the
camera head.
*6 The HDC-3100 and HDC-3170 are equipped with a single optical filter wheel for ND.
HDC Series Cutting-Edge Technologies
5
HDC Series Cutting-Edge Technologies
Compact and Lightweight Camera Body
HDC-3500, HDC-3100, and HDC-3170 cameras incorporate magnesium alloy in
their bodies and the HDC-3500 also features carbon fiber reinforced plastic
(CFRP) in its outside panel. With this strong yet lightweight design, these
cameras are highly mobile and can be operated even in the toughest shooting
conditions.
The HDC Series provides stable handling, owing to a low center of gravity. You
can easily adjust the shoulder pad into a well-balanced position without needing
to use a screwdriver. Also, a wide viewable area beneath the handle provides
you with a broad field of view, ideal for handheld camera operation. In every
carefully considered aspect, HDC Series studio cameras offer great ergonomic
design to increase ease of use.
Rich Focus Assist Functions
The viewfinder detail function adds dedicated image-enhancing edge signals
directly to the viewfinder, helping you to recognize a focusing point.
The focus assist indicator displays an indicator for adjustment at the bottom (or
another selected position) of the viewfinder frame.
In addition, the HDC-3500 and HDC-3100 are equipped with an advanced focus
position meter function; the return switch can also be utilized as the focus
position meter with illumination. Three focus positions can be assigned at the
RGB switches of the HDLA-1500 Series Large Lens Adaptor, and the same
position data can be assigned at the return switches on the camera’s intercom
panel. These switches can be lit in red, green, blue or others according to the
functions.
This is helpful especially when shooting with a wide-viewing angle.
6
Flexibility with the HDC Series
HKC-FB30: Optical Fiber Transmission Adaptor
(for HDC-3500 and HDC-3500H)
HKC-TR37: Digital Triax Transmission Adaptor
(for HDC-3500 and HDC-3500H)
Easy Transmission Change
The transmission system can be easily changed between fiber (HKC-FB30), triax (HKC-TR37), and wireless (HKC-WL50) transmission by
replacing parts assembled in the outside panels*.
In addition, since all replacement connectors are located in the outside panels, camera balance is maintained.
*7 The optional HKC-CN50 is required to attach an outside panel.
7
Flexibility with the HDC Series
Upgrade Software to Expand Creativity
An upgrade path is provided for your further creative operation. You can select
your configuration with the following optional software, including special
versions that operate for a limited time period, according to your needs.
HZC-PSF50: PsF-format Software
HZC-PSF50M: PsF-format Software (30-day limited period)
HZC-PSF50W: PsF-format Software (7-day limited period)
HZC-PRV50: 59.94p/50p Software
HZC-PRV50M: 59.94p/50p Software (30-day limited period)
HZC-PRV50W: 59.94p/50p Software (7-day limited period)
HZC-DFR50: Double-speed Capturing Software for Slow Motion
(for HDC-3500)
HZC-DFR50M: Double-speed Capturing Software for Slow Motion
(30-day limited period) (for HDC-3500)
HZC-DFR50W: Double-speed Capturing Software for Slow Motion
(7-day limited period) (for HDC-3500)
HZC-UG50: User Gamma-compatible Software
HZC-UG50M: User Gamma-compatible Software (30-day limited period)
HZC-UG50W: User Gamma-compatible Software (7-day limited period) HDC-3100
8
Flexibility with the HDC Series
* i signals are supported as standard.
* This will be supprted in .
* Progressive software is pre-installed.
HDC-3170 HDCU-3170
1080p*³
1080PsF*²
1080i*¹
HZC-PSF50
Optional Software
HDC-3500/HDC-3100 HDCU-3100
HZC-PRV50
Optional Software
1080p
1080i*¹
HDCU-3100
HDC-3500/HDC-3100
HKCU-UHD30
HZC-PRV50
Optional Software
UHD
1080p
1080i*¹
HDC-3500/HDC-3100 HDCU-3100
1080PsF
1080i*¹
HZC-PSF50
Optional Software
*²
9
Superior Operability
Wider area for an easier handle
grip
It’s easy to grip the handle even with gloves on.
And visibility through this area has improved. In
addition, the ergonomically designed handle
enables stable handling of the camera – use your
index finger to tightly hold this part of the camera.
Viewfinder position: easy and
stylish to use
The position of the viewfinder can be adjusted with
ease. You can slide the viewfinder backward or
forward and lock it to set its position with just the
positioning lever. Its mounting rods are perfectly
retracted into the body in a minimized position. As
the rods do not protrude inward,
they cannot interfere with
your hand when gripping
the handle.
Excellent Visibility
Camera numbering using
electronic paper (for the HDC-3500)
An industry first, the HDC-3500 camera uses
electronic paper (e-ink)-type camera numbers. This
numbering changes automatically when the system
changes the camera number.
In addition, graphics can also be displayed with a
number.
Side tally using an LED lamp
(for the HDC-3500)
A tally lamp is mounted next to the camera number,
improving visibility of tally status from the outside.
User-Friendly Interface
Improved layout of connectors
It’s easy to pull BNC connectors out of the rear
panel because of the ergonomic layout design.
Simple intercom with earphone
terminal
Besides the conventional intercom system, a
commercially available earphone (4-pole earphones)
can be utilized to input and output the intercom
audio signal.
10
HDCU-3100
Camera Control Unit
-Up to eight 3G-SDI/HD-SDI outputs
-Four sets of 3G-SDI/HD-SDI/SD-SDI return video inputs
-Two-channel teleprompter inputs
-Built-in LAN interface (10BASE-T/100BASE-TX)
-Two-channel data trunk lines (RS-422A or RS-232C) for easy data transmission
-Two-channel microphone outputs (two XLR connectors)
Sony HDCU-3100 and HDCU-3170 Camera Control Units are next-generation CCUs that perform signal processing, provide an interface to external
equipment, and supply power to the camera. In a compact 1.5 RU-size, these devices provide a path for IP and 12G-SDI capabilities, including IP
on HDC Series optical fiber studio cameras. These highly compact 1.5 RU-size CCUs fit a standardized 19-inch rack system, ideal for space-limited
production areas.
Versatile System Components: HDCU-3100 and HDCU-3170
HDCU-3170
Camera Control Unit
-Up to eight 3G-SDI/HD-SDI outputs
-One-channel teleprompter input
-Built-in LAN interface (10BASE-T/100BASE-TX)
-A channel data trunk line (RS-422A/RS-232C) for easy data transmission
-Two-channel microphone outputs (two XLR connectors)
-A triax transmission connector is incorporated as standard and an optical fiber
connector can also be added by installing an optional HKCU-FB30 Optical Fiber
Connector kit. When you are operating in an OB van, it’s easy to switch signals
between optical fiber and triax cables.
HDCU-3170 standard
HDCU-3170 Triax/Fiber transmission
with optional HKCU-FB30
11
Upgrade Program for 4K
With the optional HKCU-UHD30 4K HDR Processor Board and HZC-PRV50 Signal
Format Software, the HDC-3500 and HDC-3100 can be upgraded to create 4K
images as well as 4K Live HDR (high dynamic range) images.
HKCU-UHD30: 4K/HDR Processor Board
The HKCU-UHD30 4K HDR Processor Board provides 4K HDR signals for SDI and
IP output.
HKCU-SDI30: 12G-SDI Extension Kit
The HKCU-SDI30 is an 12G-SDI expansion kit that adds two connectors for 4K
12G-SDI signals.*1
*1 The HKCU-UHD30 is required for 4K signal output.
Interface Expansion Options
HKCU-FB30: Optical Fiber Connector Kit
The HDCU-3170 Digital Triax CCU can achieve fiber transmission when you install
the optional HKCU-FB30. With this new feature, the HDCU-3170 provides
selectable triax and fiber transmission in one CCU body.
HKCU-SM30: Single Mode Fiber Connector Kit
The HKCU-SM30 is a single mode fiber connection kit between a camera and
CCU.
With the HKCU-SM30, the maximum distance extends up to 10 km.
Versatile System Components: HDCU-3100 and HDCU-3170
12
Optional Accessories
MSU-1000
Master Setup Unit
HDVF-L750
7-inch*1 LCD Color Viewfinder
MSU-1500
Master Setup Unit
HDLA-1500
Large Lens Adaptor
(for attachment of the
HDVF-EL70/700A)
HDVF-L770
7-inch*1 LCD Color Viewfinder
HDLA-1505
Large Lens Adaptor
(for attachment of the HDVF-EL75/
C730W/550/C550W)
HDLA-1507
Large Viewfinder Adaptor
(for attachment of the
HDVF-EL70/700A)
RCP-1000
Remote Control Panel
RCP-1001
Remote Control Panel
RCP-1500
Remote Control Panel RCP-3100
Remote Control Panel
*Available in 2019 January
HDVF-EL30
Full HD OLED Viewfinder with
3.5-inch*1 LCD
HDVF-EL20
Full HD OLED Viewfinder
HDVF-EL70
7.4-inch*1 Color HD Viewfinder
HDVF-EL75
7.4-inch*1 Color HD Viewfinder
VFH-790
Outdoor Hood for
HDVF-EL70/EL75
*1 Viewable area measured diagonally
HDCE-100
Camera Extension Adaptor
HKCU-SM100
CCU Extension Adaptor
BKW-401
Viewfinder Rotation Bracket
BKP-7911
Script Holder
13
HKC-CN50
Side Panel Attachment Kit
HDCU-3100
Fiber Camera Control Unit
HDCU-3170
Triax Camera Control Unit
HKCU-SFP30
ST2110 Interface Kit
HKCU-SDI30
12G-SDI Extension Kit
HKCU-SM30
Single Mode Fiber Connector Kit
CAC-12
Mic Holder
HKC-FB30
Optical Fiber Transmission
Adaptor
CAC-6
Return Video Selector
HKC-TR37
Digital Triax Transmission
Adaptor
HKCU-FB30
Optical Fiber Connector Kit
HKC-WL50
Wireless Module Adaptor
*Available in 2019 January
J-712-156-0A
Camera Test Charts
HKCU-UHD30
4K/HDR Processor Board
VCT-14
Tripod Adaptor
14
Specifications
HDC-3500 HDC-3100 HDC-3170
General
Power requirements AC 240 V, 1.4 A (max.), DC 240 V, 1.05 A (max.) AC 240 V, 1.05 A (max.), DC 240 V, 1.05 A (max.) DC 240 V, 1.05 A (max.)
Operating temperature –20°C to +45°C (–4°F to 113°F)
Storage temperature –20°C to +60°C (–4°F to 140°F)
Mass Approx. 4.9 kg (10 lb 13 oz) (Unit only)
Approx. 5.1 kg (11 lb 4 oz) (when HKC-TR37 is attached)
Approx. 4.9 kg (10 lb 13 oz) (when HKC-FB30 is attached)
Approx. 4.8 kg (10 lb 9 oz) Approx. 5.0 kg (11 lb 0.4 oz)
Imager
Imager 2/3 inch type 4K CMOS sensor with global shutter 2/3 inch type CMOS sensor with global shutter
Method 3-CMOS, RGB
Electrical characteristics
Sensitivity F10 with 1080/59.94p
F11 with 1080/50p
(at 2,000 lx with 89.9% reflectance)
F12 with 1080/59.94i
F13 with 1080/50i
(at 2,000 lx with 89.9% reflectance)
Signal-to-noise ratio -62 dB or higher
Geometric distortion Negligible (not including lens distortion)
Optical system specifications
Spectrum system F1.4 prism
Built-in filters ND filters 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4: 1/16ND, 5: 1/64ND
CC filters A: cross filter, B: 3200K (clear), C: 4300K, D: 6300K
1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
Input/output connectors
CCU Electro-optical connector (LEMO 3K.93C connector) (x1) Triax connector (x1)
LENS 12-pin (x1)
VF 20-pin (x1)
MIC 1 IN XLR 3-pin, female (x1)
AUDIO IN CH1, CH2 XLR 3-pin, female (x1 each)
AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced
AUDIO switch for LINE: 0 dBu, balanced
INTERCOM 1 XLR 5-pin, female (x1)
INTERCOM 2 XLR 5-pin, female (x1) No
EARPHONE 4-pole mini jack (x1), (2-pole mono, 3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
DC IN XLR 4-pin (x1), DC 10.5 to 17 V
DC OUT 4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹
2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
SDI 1 BNC (x1)
SDI 2 BNC (x1) No
SDI MONI BNC (x1)
TEST OUT BNC (x1)
PROMPTER/GENLOCK BNC (x1)
PROMPTER 1 Vp-p, 75
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 , SD: Black burst (NTSC: 0.286 Vp-p, 75 /PAL: 0.3 Vp-p, 75 )
PROMPTER2 BNC (x1), 1 Vp-p, 75 No
RET CTRL 6-pin (x1)
REMOTE 8-pin (x1)
TRACKER 12-pin (x1)
CRANE 12-pin (x1) No
USB USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
NETWORK TRUNK RJ-45 type 8-pin (x1) No
Supplied accessories
Before Using This Unit (1), Operating Instructions (CD-ROM) (1),
Cable clamp belt (1 set), Screws (+B3×8) (2), Attached label (1)
Before Using This Unit (1), Operating Instructions (CD-ROM) (1), Cable clamp belt (1 set), Screws (+B3×8) (2),
Attached label (1), Camera number label (1)
HDC-3500/HDC-3100/HDC-3170 Specifications
* This may be limited by the imposed load or inputs.
15
HDCU-3100 HDCU-3170
General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 4.5 A (max.)
Operating temperature 5 °C to 40 °C (41 °F to 104 °F)
Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)
Mass Approx. 7.3 kg (16 lb 1.5 oz) Approx. 8.1 kg (17 lb 14 oz)
Input/output connectors
CAMERA FIBER Optical fiber connector (x1) No
CAMERA TRIAX No Triax connector (x1)
INTERCOM/TALLY/IO PORT
D-sub 50-pin connector (x1)
INTERCOM (PROD/ENG), 4 W: 0 dBu, RTS: 0 dBu, CC: –14 dBu
PGM, 3 systems, 0dBu/–20dBu (for HDC-3100/HDC-3170)
TALLY (R, G, Y)
FLAG
RCP/CNU 8-pin multi-connector (x1)
TRUNK 12-pin (x1)
LAN-COM 8-pin (x1)
NETWORK TRUNK 8-pin (x1)
SDI I/O 1 to 4
3G/HD/SD-SDI I/O
BNC (x4)
3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 , 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 , 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 , 270Mbps
3G-SDI/HD-SDI/SD-SDI, character signal selectable
REFERENCE IN/OUT
BNC (x2), loop-through output
HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75
SD: Black burst (NTSC: 0.286 Vp-p, 75 /PAL: 0.3 Vp-p, 75 ) or NTSC 10F-BB
Input connectors
AC IN 100 V to 240 V AC (x1)
SDI RET 1 to 4
BNC (x4)
3G-SDI: SMPTE ST424/425, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 270 Mbps
PROMPTER 1
PROMPTER 2/VBS-RET BNC (x2), loop-through output during 1CH mode, terminate internally at 75 during 2CH mode, analog signal, 1.0 Vp-p, 75
Output connectors
AUDIO OUT CH1, CH2 XLR 3-pin, male (x2), 0dBu/–20 dBu/+4 dBu
CHARACTER/ABS/EBU
BNC (x1), VBS, 1 Vp-p, 75
HD SYNC: BTA-S001, tri-level sync, 0.6 Vp-p, 75
SD SYNC: composite sync, 0.3 Vp-p, 75
VBS/HD, SYNC/SD, SYNC selectable
SDI OUT 1 to 4
3G/HD/SD SDI OUTPUT
BNC (x4)
3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 , 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 , 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 , 270 Mbps
3G-SDI/HD-SDI/SD-SDI, character signal selectable
Supplied accessories
Number plates (1 set), Before Using this Unit (1), Operating Instructions (CD-ROM) (1)
Optional accessories
United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782-929-XX)
United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection Cable (10 meters)
HDCU-3100/HDCU-3170 Specifications
Design and specifications are subject to change without notice
Specifications
© Sony Imaging Products & Solutions Inc.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
The values for mass and dimension are approximate.
“SONY” is a registered trademark of Sony Corporation.
All other trademarks are the property of their respective owners.
Please visit Sony’s professional website or contact your Sony representative
for specific models available in your region.
MKVKURASEP
Distributed by