Table of Contents
- Table of Contents
- Basic operations
- Advanced operations
- Preparation
- Shooting
- Selecting the shooting mode
- Movie recording setup
- Adjusting the focus
- Detecting faces
- Adjusting the brightness of the image
- The flash
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Setting the image processing
- Adjusting the color tones (White balance)
- Zooming in in one step
- Selecting the drive mode
- Playback
- Setup of the camera
- Computer
- Cleaning
- Trouble shooting/Others
- Index
Sony SLT-A65 + 18-55mm + 55-200mm User Manual
Displayed below is the user manual for SLT-A65 + 18-55mm + 55-200mm by Sony which is a product in the Digital Cameras category. This manual has pages.
Related Manuals
4-287-948-13(1)
SLT-A65/SLT-A65V ©2011 Sony Corporation
Interchangeable Lens
Digital Camera
α Handbook
A-mount
Preparing the camera
Shooting and viewing
images
Shooting images to suit
your subject
Using the shooting
functions
Using the playback
functions
Functions list
Viewing images on a
computer
Others
Advanced operations
Index
2
Table of Contents
Basic
operations ................................................................. 9
This section provides basic information on operating the camera.
The contents of the “Basic operations” section are the same as those in the
Instruction Manual supplied.
Notes on using your camera ............................................ 10
Preparing the camera
Checking the supplied items ............................................ 13
Identifying parts ............................................................... 14
Charging the battery pack ................................................ 20
Inserting the battery pack/memory card (sold separately)
..................................................................................... 22
Attaching a lens ............................................................... 25
Turning the camera on and setting the clock ................... 28
Before shooting ............................................................... 30
Adjusting the viewfinder to the visual acuity (diopter
adjustment)......................................................... 30
Holding the camera properly ...................................... 30
Shooting and viewing images
Shooting still images ....................................................... 31
Recording movies ............................................................ 33
Playing back images ........................................................ 34
Deleting images (Delete) ................................................. 35
Shooting images to suit your subject
Adjusting the angle of the LCD monitor ......................... 36
Shooting with the various shooting modes ...................... 37
......................................................................... 38
Scene Selection .................................................. 39
Sweep Panorama/ 3D Sweep Panorama ....... 40
Continuous Advance Priority AE ......................... 41
Using the shooting functions
Using the flash ................................................................. 42
Adjusting the brightness of the image ............................. 44
3
Selecting the drive mode .................................... 46
Switching the recording information display (DISP) ...... 47
Setting image size ............................................................ 48
Image Size .................................................................. 48
Panorama: Size ........................................................... 48
Using the playback functions
Enlarging images ............................................................. 50
Switching to the display of the image list ....................... 51
Viewing images on a TV screen ...................................... 52
Functions list
Functions that can be operated with the buttons/switch
..................................................................................... 53
Selecting a function with the Fn (Function) button ......... 54
Functions that can be selected with the Fn (Function) button
..................................................................................... 55
The functions selected with the MENU button ............... 57
Using the guide function of the camera ........................... 64
In-Camera Guide ........................................................ 64
Shooting Tip ............................................................... 64
Viewing images on a computer
Using with your computer ............................................... 66
Using the software ........................................................... 68
Selecting the method for creating a disc of movies ......... 72
Others
List of icons on the screen ............................................... 74
Functions available for each shooting mode ................... 77
Flash modes available ..................................................... 78
Advanced
operations ...............................................................79
This section provides further information on the camera.
Preparation
Setting up the camera ...................................................... 80
Removing the eyecup ................................................. 80
The screen displayed for shooting mode ......................... 81
Selecting the screen mode .......................................... 81
4
Histogram ................................................................... 82
The digital level gauge ............................................... 83
Monitoring the subject through the lens without effects
displayed ........................................................... 83
List of icons for viewfinder mode .............................. 84
Shooting a clear image without camera shake ................ 86
Camera shake warning indicator ................................ 86
Using the SteadyShot function ................................... 86
Using a tripod ............................................................. 87
Shooting
Selecting the shooting mode ............................................ 88
AUTO/ Flash Off .......................................... 88
......................................................................... 88
Scene Selection .................................................. 89
Sweep Panorama/ 3D Sweep Panorama ....... 91
Cont. Priority AE ................................................. 93
Program Auto ......................................................... 94
Aperture Priority ................................................... 95
Shutter Priority ....................................................... 97
Manual Exposure ................................................... 99
BULB ................................................................... 100
Movie recording setup ................................................... 103
Recording movies easily .......................................... 103
Recording movies with the shutter speed and aperture
adjusted ........................................................... 104
File Format ............................................................... 105
Record Setting .......................................................... 106
Audio Recording ...................................................... 107
Adjusting the focus ........................................................ 108
Autofocus ................................................................. 108
Focus-lock ................................................................ 110
Autofocus Mode ....................................................... 111
AF area ..................................................................... 112
Object Tracking ........................................................ 112
Manual focus ............................................................ 114
Peaking ..................................................................... 115
Focus Magnifier ....................................................... 115
Detecting faces .............................................................. 117
5
Face Detection .......................................................... 117
Face Registration ...................................................... 118
Smile Shutter ............................................................ 119
Adjusting the brightness of the image ........................... 121
AE Lock ................................................................... 121
Metering Mode ......................................................... 122
Flash Comp. ............................................................. 122
Flash control ............................................................. 123
The flash ........................................................................ 124
Wireless flash ........................................................... 124
The AF illuminator ................................................... 125
Setting ISO .................................................................... 127
Multi frame noise reduction ..................................... 127
Compensating for the brightness and contrast automatically
(D-Range) ................................................................. 128
D-RangeOptimizer ................................................... 128
Auto HDR ................................................................ 129
Setting the image processing ......................................... 131
Picture Effect ............................................................ 131
Creative Style ........................................................... 132
Adjusting the color tones (White balance) .................... 134
The fine adjustment screen for color ........................ 135
Color Temp./Color Filter ......................................... 136
Custom white balance .............................................. 136
Zooming in in one step .................................................. 138
Selecting the drive mode .................................. 139
Shooting single shot ................................................. 139
Cont. Shooting .......................................................... 139
Self-timer .................................................................. 140
Bracket: Cont./Single Bracket .................................. 140
WB bracket ............................................................... 142
Remote Cdr. ............................................................. 142
Playback
The screen displayed for playback mode ...................... 144
Switching the screen during playback ...................... 144
List of icons on the histogram display ..................... 144
Using the playback functions ........................................ 146
Rotating an image .................................................... 146
6
View Mode ............................................................... 146
Slide Show ............................................................... 147
Playback Display ...................................................... 147
Scrolling panoramic images ..................................... 148
Protecting images (Protect) ........................................... 149
Deleting images (Delete) ............................................... 150
Delete (Multiple Img.) ............................................. 150
Deleting all the images or movies in the same view mode
.......................................................................... 151
About playback on TV .................................................. 152
3D Viewing .............................................................. 152
Using “BRAVIA” Sync ........................................... 152
Setup of the camera
GPS setting (SLT-A65V only) ...................................... 154
GPS Assist Data ....................................................... 155
GPS Auto Time Cor. ................................................ 155
Setting the aspect ratio and image quality ..................... 157
Aspect Ratio ............................................................. 157
Quality ...................................................................... 157
Setting the other functions of the camera ...................... 159
Long Exposure NR ................................................... 159
High ISO NR ............................................................ 159
Color Space .............................................................. 160
Release w/o Lens ...................................................... 160
Grid Line .................................................................. 161
Auto Review ............................................................. 161
Func. of AEL button ................................................ 161
ISO Button ............................................................... 162
Preview Button ......................................................... 162
Electronic Front Curtain Shutter .............................. 162
LCD Brightness ........................................................ 163
Viewfinder Bright. ................................................... 163
Power Save ............................................................... 164
FINDER/LCD Setting .............................................. 164
Lens compensation ........................................................ 165
Lens Comp.: Peripheral Shading .............................. 165
Lens Comp.: Chromatic Aberration ......................... 165
Lens Comp.: Distortion ............................................ 165
7
Setting the method for recording on a memory card ..... 166
Format ...................................................................... 166
File Number ............................................................. 166
Folder Name ............................................................. 166
Select REC Folder .................................................... 167
New Folder ............................................................... 167
Recover Image DB ................................................... 168
Upload Settings ........................................................ 168
Resetting to the default .................................................. 170
Confirming the version of the camera ........................... 174
Computer
Connecting the camera to the computer ........................ 175
Setting the USB connection ..................................... 175
Connecting to the computer ..................................... 175
Importing images to the computer (Windows) ........ 176
Importing images to the computer (Macintosh) ....... 177
Deleting the USB connection ................................... 178
Creating a movie disc .................................................... 179
Creating an AVCHD format disc ............................. 179
Creating a standard definition image quality (STD) disc
................................................................................... 180
Discs you can use with “PMB” ................................ 181
Print
Specifying DPOF .......................................................... 182
Date Imprint ............................................................. 182
Cleaning
Cleaning the camera and a lens ..................................... 183
Cleaning the image sensor ............................................. 184
Trouble shooting/Others
Troubleshooting ............................................................. 187
Warning messages ......................................................... 196
Precautions .................................................................... 198
To use your camera abroad — Power sources .............. 201
AVCHD format ............................................................. 202
GPS (SLT-A65V only) .................................................. 203
3D-shootings ................................................................. 205
Memory card ................................................................. 206
10
Notes on using your camera
Shooting procedure
• This camera has 2 modes for monitoring
subjects: the LCD monitor mode using
the LCD monitor, and the viewfinder
mode using the viewfinder.
• The recorded image may be different
from the image you monitored before
recording.
Notes on the functions available with
the camera
• To check whether it is a 1080 60i-
compatible device or 1080 50i-
compatible device, check for the
following marks on the bottom of the
camera.
1080 60i-compatible device:60i
1080 50i-compatible device:50i
• This camera is compatible with 1080 60p
or 50p-format movies. Unlike standard
recording modes up to now, which record
in an interlacing method, this camera
records using a progressive method. This
increases the resolution, and provides a
smoother, more realistic image.
• You may feel uncomfortable symptoms
such as eyestrain, nausea, or a tired
feeling while watching 3D-images
recorded with the camera on 3D-
compatible monitors. When you watch
3D-images, we recommend that you take
a break at regular time intervals. Since
the need for or frequency of break times
varies among individuals, please set your
own standards. If you feel sick, stop
watching 3D-images, and consult a
doctor as needed. Also, refer to the
operating instructions of the connected
device or the software used with the
camera. A child’s vision is always
vulnerable (especially for children under
6 years of age). Before allowing them to
watch 3D-images, please consult with an
expert, such as a pediatric or ophthalmic
doctor. Be sure to make sure your
children follow the precautions above.
No compensation for contents of the
recording
The contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera or a memory card, etc.
Back up recommendation
To avoid the potential risk of data loss,
always copy (back up) data to other
medium.
Notes on the LCD monitor, electronic
viewfinder, lens, and image sensor
• The LCD monitor and electronic
viewfinder are manufactured using
extremely high-precision technology so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright
points (white, red, blue or green in color)
that constantly appear on the LCD
monitor and electronic viewfinder. These
points are normal in the manufacturing
process and do not affect the images in
any way.
• Do not hold the camera by taking hold of
the LCD monitor.
• Do not expose the camera to sunlight or
shoot sunward for a long time. The
internal mechanism may be damaged. If
sunlight is focused on a nearby object, it
may cause a fire.
• There is a magnet on the back and around
the rotating shaft of the hinge part of the
LCD monitor. Do not bring anything that
is easily affected by a magnet, such as
floppy disk, credit cards near the LCD
monitor.
• Images may trail across on the screen in a
cold location. This is not a malfunction.
When turning on the camera in a cold
location, the screen may become
temporarily dark. When the camera
warms up, the screen will function
normally.
11
Notes on using your camera
Notes on long-time recording
• When you continue to shoot for a long
time, the temperature of the camera rises.
If the temperature reaches above a certain
level, the mark is indicated on the
screen and the camera is turned off
automatically. If the power is turned off,
leave the camera for 10 minutes or longer
to allow the temperature inside the
camera to decrease to a safe level.
• Under high ambient temperatures, the
temperature of the camera rises quickly.
• When the temperature of the camera
rises, the image quality may deteriorate.
It is recommended that you wait until the
temperature of the camera drops before
continuing to shoot.
• The surface of the camera may get warm.
This is not a malfunction.
Notes on importing AVCHD View
movies* to a computer
When importing AVCHD View movies to
a computer, for Windows computers, use
the “PMB” software on the CD-ROM
(supplied).
* “AVCHD View movies” are movies that
were recorded in the [AVCHD 60i/60p]/
[AVCHD 50i/50p] mode of [File Format]
(page 105).
Notes when playing movies on other
devices
• This camera uses MPEG-4 AVC/H.264
High Profile for AVCHD format
recording. Movies recorded in AVCHD
format with this camera cannot be played
with the following devices.
–Other devices compatible with AVCHD
format that does not support High
Profile
–Devices incompatible with the AVCHD
format
This camera also uses MPEG-4 AVC/
H.264 Main Profile for MP4 format
recording. For this reason, movies
recorded in MP4 format with this camera
cannot be played on devices other than
those that support MPEG-4 AVC/H.264.
• Discs recorded with HD image quality
(high definition) can be played back only
on AVCHD format-compatible devices.
DVD-based players or recorders cannot
play back HD image quality discs, as
they are incompatible with the AVCHD
format. Also, DVD-based players or
recorders may fail to eject HD image
quality discs.
• 1080 60p/50p movies can be played back
on compatible devices only.
On GPS-compatible devices (SLT-
A65V only)
• To determine whether your camera
supports GPS function, check the model
name of your camera.
GPS-compatible: SLT-A65V
GPS-incompatible: SLT-A65
• Use GPS in accordance with regulations
of countries and regions where you use it.
• If you do not record the location
information, set [GPS On/Off] to [Off]
(page 154).
• In an airplane, make sure to turn off the
camera following cabin announcements.
Warning on copyright
Television programs, films, videotapes, and
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provisions of the
copyright laws.
The pictures used in this manual
The photographs used as examples of
pictures in this manual are reproduced
images, and are not actual images shot
using this camera.
On the data specifications described
in this manual
The data on performance and specifications
is defined under the following conditions,
except as described in this manual: at an
ordinary ambient temperature of 25ºC
(77°F), and using a battery pack that is
charged for about 1 hour after the
CHARGE lamp goes out.
12
Notes on using your camera
Model name
This manual covers several models
supplied with different lenses.
The model name varies depending on the
supplied lens. The available model varies
depending on the countries/regions.
Notes on shooting with the
viewfinder
This camera is equipped with an XGA
Organic Electro-Luminescence viewfinder
with high resolution and high contrast. This
viewfinder achieves a wide viewing angle
and a long eye relief, approaching that of
the DSLR-A900 equipped with a 35 mm
full size sensor. This camera is designed to
provide an easily viewable viewfinder by
appropriately balancing various elements.
• The image may be slightly distorted near
the corners of the viewfinder. This is not
a malfunction. When you want to check
every detail of the entire composition,
you can also use the LCD monitor.
• If you pan the camera while looking into
the viewfinder or move your eyes around,
the image in the viewfinder may be
distorted or the color of the image may
change. This is a characteristic of the lens
or display device and is not a
malfunction. When you shoot an image,
we recommed that you look at the center
area of the viewfinder.
Model name Lens
SLT-A65/A65V –
SLT-A65K/
A65VK
DT18-55mm
SLT-A65Y/
A65VY
DT18-55mm and
DT55-200mm
SLT-A65M/
A65VM
DT18-135mm
13
Preparing the camera
Preparing
the
camera
Checking the supplied items
First check the model name of your camera (page 12). The accessories
supplied differ depending on the model.
The number in parentheses indicates the number of pieces.
Common accessories
• Camera (1)
• BC-VM10A Battery charger (1)
• Power cord (mains lead) (1)* (not
supplied in the U.S.A. and
Canada)
* Multiple power cords may be supplied
with your camera. Use the appropriate
one that matches your country/region.
• Rechargeable battery pack NP-
FM500H (1)
• USB cable (1)
• Shoulder strap (1)
• Body cap (1) (Attached on the
camera)
• Eyecup (1) (Attached on the
camera)
•CD-ROM (1)
– Application Software for α
camera
–α Handbook (This manual)
• Instruction Manual (1)
SLT-A65K/A65VK
• DT18-55mm zoom lens (1)/Front
lens cap (1)/Packaging lid (1)
SLT-A65Y/A65VY
• DT18-55mm zoom lens (1)/Front
lens cap (1)/Packaging lid (1)
• DT55-200mm zoom lens (1)/
Front lens cap (1)/Rear lens cap
(1)/Lens hood (1)
SLT-A65M/A65VM
• DT18-135mm zoom lens (1)/
Front lens cap (1)/Rear lens cap
(1)/Lens hood (1)
14
Identifying parts
See the pages in parentheses for details of operation.
AShutter button (31)
BPower switch (28)
CControl dial (94)
DRemote sensor (142)
ESelf-timer lamp (140)
FLens contacts*
GMirror*
HPreview button (97)
IMount
JBuilt-in flash* (42, 124)
KMicrophone** (107)
LMode dial (37)
M (Flash pop-up) button (42,
124)
NMounting index (25)
OLens release button (26)
PFocus mode switch (108, 114)
* Do not directly touch these
parts.
** Do not cover this part
during movie recording.
Doing so may cause noise
or lower the volume.
Front side
15
Identifying parts
Preparing the camera
AEyepiece sensors (80)
BViewfinder*
• When you look into the
viewfinder, the viewfinder
mode is activated, and when
you take your face away from
the viewfinder, the screen mode
returns to the LCD monitor
mode.
CDiopter-adjustment dial (30)
DLCD monitor (74, 84, 144)
ELight sensor (163)
FEyecup (80)
GFor shooting: Fn (Function)
button (54, 55)
For viewing: (Image
rotation) button (146)
HControl button
v/V/b/B/DISP (Display) (81,
144)/WB (White balance)
(134)/ (Drive) (46, 139)/
(Picture Effect) (131)
IControl button (Enter)/AF
button (112)/Object Tracking
button (112)
J (In-Camera Guide) button
(64)
For viewing: (Delete) button
(35)
K (Playback) button (34)
* Do not directly touch this
part.
Rear side
16
Identifying parts
AAuto-lock Accessory shoe
(124)
BMENU button (57)
CMOVIE button (33, 103)
DFINDER/LCD button (164)
E (Exposure) button (44)
FISO button (127)
G Image sensor position
mark (110)
HFor shooting: (Smart
teleconverter) button (138)/
Focus Magnifier button (115)
For viewing: (Zoom in)
button (50)
IFor shooting: AEL (AE lock)
button (121)/AV (Aperture
value) button (99)
For viewing: (Zoom out)
button (50)/ (Image index)
button (51)
Top side
17
Identifying parts
Preparing the camera
AHooks for shoulder strap
• Attach both ends of the strap
onto the camera.
BREMOTE terminal
• When connecting the RM-
L1AM Remote Commander
(sold separately) to the camera,
insert the plug of the Remote
Commander into the REMOTE
terminal, aligning the guide of
the plug with the guide of the
REMOTE terminal. Make sure
that the cord of the Remote
Commander faces forward.
CSpeaker
DDC IN terminal
• When connecting the AC-
PW10AM AC Adaptor (sold
separately) to the camera, turn
the camera off, then plug the
connector of the AC Adaptor to
the DC IN terminal on the
camera.
EMicrophone jack
• When an external microphone
is connected, the internal
microphone is turned off
automatically. When the
external microphone is a plug-
in-power type, the power of the
microphone is supplied by the
camera.
FHDMI terminal (52, 152)
G (USB) terminal (175)
HAccess lamp (23)
IMemory card insertion slot (22)
JMemory card cover (22)
Sides/Bottom
18
Identifying parts
KBattery insertion slot (22)
LBattery cover (22)
MTripod receptacle
• Use a tripod with a screw length
of less than 5.5 mm (7/32 inch).
You will be unable to firmly
secure the camera to tripods
with a screw length of 5.5 mm
(7/32 inch) or longer, and
attempting to do so may
damage the camera.
19
Identifying parts
Preparing the camera
DT 18-55mm F3.5-5.6 SAM
(Supplied with the SLT-A65K/A65VK/
A65Y/A65VY)
DT 55-200mm F4-5.6 SAM
(Supplied with the SLT-A65Y/A65VY)
DT 18-135mm F3.5-5.6 SAM
(Supplied with the SLT-A65M/A65VM)
AFocusing ring
BZoom ring
CFocal-length scale
DFocal-length index
ELens contacts
FFocusing mode switch
GMounting index
HLens hood index
IZoom lock switch
• The DT 18-55mm F3.5-5.6
SAM/DT 55-200mm F4-5.6
SAM/DT 18-135mm F3.5-5.6
SAM are designed for Sony A-
mount cameras (models equipped
with an APS-C sized image
sensor). You cannot use these
lenses on 35mm-format cameras.
• For the lenses other than DT 18-
55mm F3.5-5.6 SAM/DT 55-
200mm F4-5.6 SAM/DT 18-
135mm F3.5-5.6 SAM, refer to
the operating instructions
supplied with the lens.
Lens
20
Charging the battery pack
When using the camera for the first time, be sure to charge the NP-
FM500H “InfoLITHIUM” battery pack (supplied).
The “InfoLITHIUM” battery pack can be charged even when it has not
been fully depleted.
It can also be used when it has not been fully charged.
The battery pack is discharged little by little without using it. To miss the
opportunity to shoot, check the remaining battery level before use. If the
battery level is low, charge it again.
1Insert the battery pack onto
the battery charger.
Push the battery pack until it clicks.
21
Charging the battery pack
Preparing the camera
Notes
• The charging time differs depending on the remaining capacity of the battery pack or
charging conditions.
• We recommend charging the battery pack in an ambient temperature of between
10°C to 30°C (50°F to 86°F). You may not be able to efficiently charge the battery
pack outside of this temperature range.
• Connect the battery charger to the nearest wall outlet (wall socket).
2Connect the battery charger
to the wall outlet (wall
socket).
Light on: Charging
Light off: Charge completed
• When charging a fully depleted
battery pack at a temperature of 25°C
(77°F).
• The CHARGE lamp turns off when
charging is completed.
For the U.S.A and Canada
CHARGE lamp
For countries/regions other than the
U.S.A. and Canada
Charging time About 175 minutes
Plug
To a wall outlet
(wall socket)
CHARGE lamp
22
Inserting the battery pack/memory
card (sold separately)
1While sliding the battery
cover open lever, open the
cover.
2Firmly insert the battery pack
all the way while pressing
the lock lever with the tip of
the battery.
Lock lever
3Close the cover.
4While sliding the memory
card cover, open the cover.
23
Inserting the battery pack/memory card (sold separately)
Preparing the camera
To remove the battery pack
To remove the memory card
Check that the access lamp is not lit, then open the cover, and push the
memory card once.
To check the remaining battery level
The supplied battery pack is a lithium-ion battery pack that has functions
for exchanging information related to operating conditions with your
camera. The remaining battery time in percent figures is displayed
according to the operating conditions of your camera.
5Insert a memory card.
• With the notched corner facing as
illustrated, insert the memory card
until it clicks into place.
Ensure the notched corner faces
correctly.
6Close the cover.
Turn off the camera and slide the lock
lever in the direction of the arrow. Be
careful not to drop the battery pack.
Lock lever
24
Inserting the battery pack/memory card (sold separately)
The following memory cards are compatible with this camera. However, all
memory cards are not guaranteed to work with this camera.
• MultiMediaCard cannot be used.
Note
• Images recorded on an SDXC memory card cannot be imported to or played on
computers or AV devices that are not compatible with exFAT. Make sure that the
device is compatible with exFAT before connecting it to the camera. If you connect
your camera to an incompatible device, you may be prompted to format the card.
Never format the card in response to this prompt, as doing so will erase all data on
the card. (exFAT is the file system used on SDXC memory cards.)
Battery level
“Battery
exhausted.”
High Low You cannot shoot
any more pictures.
Available memory cards
Types of memory card Still
images Movies In this manual
Memory Stick PRO Duo (Mark2) Memory Stick
PRO Duo
Memory Stick PRO-HG Duo
SD memory card (Class 4 or faster)
SD card
SDHC memory card (Class 4 or faster)
SDXC memory card (Class 4 or faster)
25
Preparing the camera
Attaching a lens
Notes
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• E-mount lenses are not compatible with this camera.
• When you use a lens for which a tripod socket is provided, attach the lens onto the
tripod using the tripod socket provided to help balance the weight of the lens.
• When carrying the camera with a lens attached, hold both the camera and the lens
firmly.
1Remove the body cap from
the camera and the
packaging lid from the rear
of the lens.
• When changing the lens, quickly
change the lens away from dusty
locations so as to keep dust or debris
from getting inside the camera.
• When shooting, remove the front lens
cap from the front of the lens.
Front lens cap
Packaging lid
2Mount the lens by aligning
the orange index marks
(mounting indexes) on the
lens and camera.
Orange index marks
3Turn the lens clockwise until
it clicks into the locked
position.
• Be sure to put the lens on straight.
Body cap
26
Attaching a lens
• Do not hold the part of the lens that is extended for the zoom or focus adjustment.
To remove the lens
To attach a lens hood
Notes
• A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the
ALC-SH108 (sold separately).
• The lens hood may block the light of the flash. Remove the lens hood when using the
flash.
1Press the lens release button
all the way in and turn the
lens counterclockwise until it
stops.
Lens release button
2Attach the caps to the front
and rear of the lens and the
body cap to the camera.
• Before you attach them, remove dust
from them.
• A rear lens cap is not supplied with
the DT 18-55mm F3.5-5.6 SAM Lens
Kit. When you store the lens without
attaching it to the camera, purchase
the Rear Lens Cap ALC-R55.
It is recommended that you use a lens
hood to reduce flare and ensure
maximum image quality.
Fit the hood into the mount on the end of
the lens barrel and rotate the hood
clockwise until it clicks.
27
Attaching a lens
Preparing the camera
• When storing, turn over the lens hood and place it onto the lens backwards.
Note on changing the lens
When changing the lens, if dust or debris gets inside the camera and
adheres to the surface of the image sensor (the part that acts as the film), it
may appear as dark spots on the image, depending on the shooting
environment.
The camera is equipped with an anti-dust function to prevent dust from
landing on the image sensor. However, quickly change the lens away from
dusty locations when attaching/removing a lens.
28
Turning the camera on and setting the
clock
When you turn the camera on for the first time, the date/time setup screen
appears.
1Set the power switch to ON to
turn the camera on.
The screen used for setting date and
time appears.
• To turn the camera off, set it to OFF.
2Verify that [Enter] is selected
on the LCD monitor, then
press the center of the
control button.
3Select your area with b/B on the control button, then
press the center of the control button.
4Select each item with b/B
and set the numeric value
with v/V.
[Daylight Svg.:]: Turns on or off the
daylight saving time setting.
[Date Format:]: Selects the format to
display date.
• Midnight is indicated as 12:00 AM,
and noon as 12:00 PM.
29
Turning the camera on and setting the clock
Preparing the camera
To cancel the date/time setting operation
Press the MENU button.
To set up the date/time again
When you turn the camera on for the first time, the date/time setup screen
appears automatically. The next time, set up the date and time from the
menu.
MENU button t 1 t [Date/Time Setup]
To set up the area again
You can set the area where you are using the camera. This allows you to set
the local area when you use the camera abroad.
MENU button t 1 t [Area Setting]
Maintaining the date and time setting
This camera has an internal rechargeable battery for maintaining the date
and time and other settings regardless of whether the power is on or off, or
the battery is installed or not (page 198).
5Repeat step 4 to set other items, then press the center
of the control button.
6Verify that [Enter] is selected, then press the center of
the control button.
30
Before shooting
Note
• The dioptic adjustment attachment (sold separately) cannot be used with this camera.
Stabilize your upper body and take a position that keeps the
camera from moving.
Point 1
One hand holds the grip of the camera, and the other hand supports the lens.
Point 2
Take a secure stance with your feet shoulder-width apart.
Point 3
Lightly tuck your elbows against your body.
When shooting in a kneeling position, steady your upper body by placing
your elbow on your knee.
Adjusting the viewfinder to the visual acuity (diopter
adjustment)
Adjust the diopter-adjustment
dial to your eyesight until the
display appears clearly in the
viewfinder.
Holding the camera properly
In LCD monitor mode In viewfinder mode In viewfinder mode
(vertical position)
31
Shooting and viewing images
Shooting and viewing images
Shooting still images
The “AUTO” mode allows you to easily shoot any subject under any
conditions because the camera makes appropriate judgments on the
situation to adjust the settings.
Select when shooting in a location where the use of a flash is restricted.
1Set the mode dial to or
(Flash Off).
2Hold the camera, monitoring your shot with the LCD
monitor or viewfinder.
3Overlay the AF area on the
desired subject.
• If the (Camera shake
warning) indicator flashes, carefully
shoot the subject, holding the camera
steady, or by using a tripod.
AF area
4When using a zoom lens,
turn the zoom ring, then
decide on your shot.
or
(Camera shake
warning) indicator
Zoom ring
33
Shooting and viewing images
Recording movies
Notes
• The sound of the camera and the lens in operation may be recorded while recording a
movie. You can disable sound recording by setting [Audio Recording] to [Off]
(page 107).
• The continuous recording time of a movie may be shorter, depending on the ambient
temperature or the status of the camera. See “Notes on continuous movie recording.”
• When the mark is indicated, the temperature of the camera is too high. Turn the
camera off and wait until the temperature of the camera drops (page 197).
1Press the MOVIE button to
start recording.
• Movie recording can be started from
any exposure mode.
• The shutter speed and aperture are
adjusted automatically. If you want to
set them to particular values, set the
mode dial to (Movie) (page 104).
• The camera continues to adjust the
focus when it is in autofocus mode.
MOVIE button
2Press the MOVIE button again to stop recording.
34
Playing back images
Note
• Movies recorded with other devices may not be played back on this camera.
1Press the button.
button
2MENU button t 1 t [View Mode] t Select the
desired mode
• To play back still images, select [Folder View(Still)], and to play back
movies, select [Folder View(MP4)] or [AVCHD View] according to the
file format.
3Select an image with b/B on the control button.
• To play back movies, press the center of the control button.
During movie playback Control button/control dial operation
To pause/resume z
To fast-forward B
To fast-rewind b
To slow-forward Rotate the control dial to the right during
pause
To slow-reverse Rotate the control dial to the left during
pause
• The movie is played back frame-by-
frame.
To adjust sound volume V t v/V
To display the information v
35
Shooting and viewing images
Deleting images (Delete)
Once you have deleted an image, you cannot restore it. Check whether to
delete the image or not beforehand.
Note
• Protected images cannot be deleted.
Deleting the image that is currently displayed
1Display the image you want
to delete and press the
button.
button
2Select [Delete] with v on the control button, then press
the center of the control button.
36
Shooting images to suit your subject
Adjusting the angle of the LCD monitor
Adjust the LCD monitor to an easily
viewable angle.
• The LCD monitor tilts 180 degrees.
• The LCD monitor can be rotated
leftward 270 degrees from the position
in which the LCD monitor is facing
forward.
• When the LCD monitor is not used, it is
recommended that you close it with the
screen side facing to the camera.
Note
• When the LCD monitor is open, the eye
sensor may not be able to function in
situations involving low-position shooting. If
you look into the viewfinder and the monitor
is not switched automatically, press the
FINDER/LCD button.
37
Shooting images to suit your subject
Shooting with the various shooting
modes
The following shooting modes are provided with the camera:
Set the mode dial to the desired
mode.
(AUTO)/
(Flash Off) (31, 88)
The “AUTO” mode allows you to easily shoot any subject
under any conditions because the camera makes appropriate
judgments on the situation to adjust the settings. Select
“Flash Off” when you want to shoot without the flash.
(Auto+) (38,
88)
The camera recognizes and evaluates the shooting condition,
and appropriate settings are set automatically. The camera
saves 1 appropriate image by combining or separating
images, as necessary.
(Scene
Selection) (39, 89)
Selecting an appropriate mode for the subject or the shooting
conditions allows you to shoot the image with a suitable
setting for the subject.
(Sweep
Panorama) (40, 91)
Allows you to shoot panoramic images.
(3D Sweep
Panorama) (40, 91)
Allows you to shoot 3D panoramic images for playback on a
3D compatible TV.
(Cont. Priority
AE) (41, 93)
The camera continues to shoot while the shutter button is
pressed fully down. The camera records the images
continuously at a maximum of about 10 images per second.
(Movie) (33,
103)
Allows you to shoot movies with the exposure adjusted
manually (both the shutter speed and the aperture value).
(Program Auto)
(94)
Allows you to shoot with the exposure adjusted automatically
(both the shutter speed and the aperture value). The other
settings can be adjusted manually.
(Aperture
Priority) (95)
Allows you to shoot after adjusting the aperture value
manually using the control dial.
(Shutter Priority)
(97)
Allows you to shoot after adjusting the shutter speed
manually using the control dial.
38
Shooting with the various shooting modes
Scene recognized by the camera
Shooting function
(Manual
Exposure) (99)
Allows you to shoot after adjusting the exposure manually
(both the shutter speed and the aperture value) using the
control dial.
1Set the mode dial to (Auto+).
2Point the camera towards the
subject.
When the camera recognizes and adjusts
for shooting conditions, the following
information is indicated: recognized
scene mode mark, appropriate shooting
function, the number of images to be
shot.
Recognized scene mode mark
Number of images to be shot
3Adjust the focus and shoot the subject.
(Night Scene) (Hand-held Twilight) (Landscape)
(Backlight Portrait) (Portrait) (Tripod Night Scene)
(Backlight) (Macro) (Night Portrait)
(Spotlight) (Low Brightness) (Baby)
Cont. Shooting (139) Slow Sync. (42, 124) Auto HDR (129)
Daylight Sync. Slow Shutter Hand-held Twilight (39,
89)
Shooting function
39
Shooting with the various shooting modes
Shooting images to suit your subject
Scene Selection
1Set the mode dial to (Scene Selection).
2Press the center of the control button.
3Select the desired mode with v/V, then press the center of the
control button.
• To change the scene, press the Fn button, then select another scene.
4Adjust the focus and shoot the subject.
(Portrait) Blurs away backgrounds and sharpens the subject. Expresses
skin tones softly.
(Sports Action) Shoots a moving subject at a fast shutter speed so that the
subject looks as if it is standing still. The camera shoots
images continuously while the shutter button is pressed.
(Macro) Shoots close subjects such as flowers, foods.
(Landscape) Shoots the entire range of scenery in sharp focus with vivid
colors.
(Sunset) Shoots the red of the sunrise or sunset beautifully.
(Night Scene) Shoots night scenes at a distance without losing the dark
atmosphere of the surroundings.
(Hand-held
Twilight)
Shoots night scenes with less noise and blur without using a
tripod. A burst of shots are taken, and image processing is
applied to reduce subject blur, camera shake, and noise.
(Night Portrait) Shoots portraits in night scenes.
40
Shooting with the various shooting modes
Sweep Panorama/ 3D Sweep Panorama
1Set the mode dial to (Sweep Panorama)/ (3D Sweep
Panorama).
2Press the center of the control button.
3Point the camera at the edge of
the subject, then press the shutter
button halfway down to adjust the
focus.
This part will not be taken
4Press the shutter button fully down.
5Pan or tilt the camera to the end,
following the guidance on the
screen.
Guidance bar
41
Shooting with the various shooting modes
Shooting images to suit your subject
Continuous Advance Priority AE
1Set the mode dial to (Cont. Priority AE).
2Adjust the focus and shoot the subjects.
• The camera continues to shoot while the shutter button is pressed fully
down.
• The camera records the images continuously at a maximum of about 10
images per second.
42
Using the shooting functions
Using the flash
In a dark location, using the flash allows you to shoot the subject brightly,
and it also helps to prevent camera shake. When shooting into the sun, you
can use the flash to shoot a bright image of the backlit subject.
1Fn button t (Flash Mode) t Select the desired setting
• For further information on the flash modes available for each shooting
mode, see page 78.
2Press the button.
The flash pops up.
• In AUTO, AUTO+ or Scene Selection
mode, the flash automatically pops up
if the amount of light is insufficient or
the subject is backlit. The built-in flash
does not pop up even if you press the
button.
button
3After the flash has finished
charging, shoot the subject.
Flashing: The flash is being charged.
When the indicator flashes, you cannot
release the shutter.
Lit: The flash has been charged and
is ready to fire.
• When you press the shutter button
halfway down under dark lighting in
autofocus mode, the flash may be fired
to help focus on a subject (AF
Illuminator).
(Flash charging) indicator
43
Using the flash
Using the shooting functions
(Flash Off) Does not fire even the built-in flash pops up.
• You cannot select this item when the mode dial is set to P,
A, S, or M. However, the flash will not be fired if it is not
pulled up.
(Autoflash) Fires if it is dark or against light.
(Fill-flash) Fires every time you trigger the shutter.
(Slow Sync.) Fires every time you trigger the shutter. Slow sync shooting
allows you to shoot a clear image of both the subject and the
background by slowing the shutter speed.
(Rear Sync.) Fires right before the exposure is completed every time you
trigger the shutter.
(Wireless) Fires an external flash (sold separately) that is off the camera
and away from it (Wireless flash shooting).
44
Adjusting the brightness of the image
Except for exposure mode M, the exposure is automatically selected
(Automatic exposure).
Based on the exposure acquired by the automatic exposure, you can
perform exposure compensation. You can make the entire image brighter
by shifting to the + side. The entire image becomes darker when you shift it
to the – side (Exposure compensation).
• Adjust the compensation level by checking the recorded image.
• Using bracket shooting, you can shoot multiple images with the exposure
shifted to the plus or minus sides (page 140).
1Press the button. button
2Adjust the exposure with the
control dial.
Toward + (over): Brightens an image.
Toward – (under): Darkens an image.
• In viewfinder mode, confirm the
exposure using the EV scale.
LCD monitor
Compensated exposure
Viewfinder
Standard exposure
3Adjust the focus and shoot the subject.
Shooting techniques
45
Adjusting the brightness of the image
Using the shooting functions
Note
• This item cannot be set when the exposure mode is set to AUTO, AUTO+, or Scene
Selection.
46
Selecting the drive mode
You can use an appropriate drive mode to suit your purposes, such as
single-shot advanced, continuous advanced, or bracket.
on the control button t
Select the desired mode
(Single
Shooting) (139)
This mode is for normal shooting.
(Cont. Shooting)
(139)
The camera records the images continuously.
(Self-timer) (140) The 10-second self-timer is convenient when the
photographer appears in a photo and the 2-second self-timer
is convenient to reduce the camera shake.
(Bracket:
Cont.) (140)
You can shoot 3 images, each with different degrees of
exposure.
(Single
Bracket) (140)
You can shoot 3 images, shot by shot, each with different
degrees of exposure.
(WB
bracket) (142)
Based on the selected white balance, and the color
temperature/color filter, 3 images are recorded with the white
balance shifted.
(Remote Cdr.)
(142)
You can shoot using the SHUTTER and 2SEC (the shutter is
released after 2 seconds) buttons on the RMT-DSLR1
Wireless Remote Commander (sold separately).
47
Using the shooting functions
Switching the recording information
display (DISP)
Graphic Display
Each time you press DISP on the control
button, the recording information display
changes as follows.
You can select the available displays in
the viewfinder or on the LCD monitor
separately.
The Graphic Display shows the shutter
speed and aperture value as graphs, and
clearly illustrates how the exposure
works. The pointers on the shutter speed
indicator and aperture indicator indicate
the current value.
Shutter speed
No Disp. Info. LevelDisplay All Info.
Digital level gauge
Graphic Display
Aperture value
48
Setting image size
MENU button t 1 t [Image Size] t Select the desired size
[Aspect Ratio]: [3:2]
[Aspect Ratio]: [16:9]
Note
• When you select a RAW image with [Quality], the image size of the RAW image
corresponds to L. This size is not displayed on the screen.
You can set the image size of panoramic images. The image size varies
depending on the setting of the shooting direction (page 93).
MENU button t 1 t [Panorama: Size] or [3D Pan.: Image
Size] t Select the desired size
[Panorama: Size]
Image Size
Image size Usage guidelines
L:24M 6000 × 4000 pixels For shooting at the highest image
quality
M:12M 4240 × 2832 pixels For prints up to A3+ size
S:6.0M 3008 × 2000 pixels For prints up to A5 size
Image size Usage guidelines
L:20M 6000 × 3376 pixels For viewing on a high-definition
TV
M:10M 4240 × 2400 pixels
S:5.1M 3008 × 1688 pixels
Panorama: Size
Standard [Panorama: Direction] is set to [Up] [Down]: 3872 × 2160
[Panorama: Direction] is set to [Right] [Left]: 8192 × 1856
Wide [Panorama: Direction] is set to [Up] [Down]: 5536 × 2160
[Panorama: Direction] is set to [Right] [Left]: 12416 × 1856
49
Setting image size
Using the shooting functions
[3D Pan.: Image Size]
16:9 1920 × 1080
Standard 4912 × 1080
Wide 7152 × 1080
50
Using the playback functions
Enlarging images
A still image can be enlarged for closer examination. This is convenient to
check the focus condition of a recorded image.
To cancel the enlarged playback
Press the center of the control button so that the image returns to the normal
size.
1Display the image you want to
enlarge, then press the button.
button
2Zoom the image in or out with the button or button.
• Rotating the control dial switches the image at the same display
magnification. When you shoot multiple images with the same
composition, you can compare their focus conditions.
3Select the portion you want to enlarge with v/V/b/B on the
control button.
51
Using the playback functions
Switching to the display of the image
list
You can display multiple images on the screen simultaneously.
To return to the single-image screen
Press the center of the control button when you select the desired image.
To display the desired folder
Press the button.
The image index screen is displayed.
button
Select the left bar on the image index
screen with the control button, then select
the desired folder with v/V. Pressing the
center of the control button when the left
bar is selected switches the view mode.
52
Viewing images on a TV screen
To view images recorded on the camera on a TV set, an HDMI cable (sold
separately) and an HD TV equipped with an HDMI connector are required.
1Turn off both your camera and the
TV, and connect the camera to the
TV.
2Turn on the TV and switch the input.
• See also the operating instructions supplied with the TV.
3Turn on the camera, and press the
button.
Images shot with the camera appear on
the TV screen.
Select the desired image with b/B on the
control button.
• The LCD monitor on the camera does
not turned on.
button
1 To the HDMI
connector
HDMI cable
(sold separately)
2 To the
HDMI terminal
Control button
53
Functions list
Functions list
Functions that can be operated with
the buttons/switch
You can set up or operate various functions with these buttons/switch.
For the location of the buttons/switch, see “Identifying parts” (page 14).
button (42, 124) Pops the flash up.
button (44) Compensates the exposure.
ISO button (127) Adjusts the ISO sensitivity.
FINDER/LCD button (164) Switches the display between the LCD monitor and the
viewfinder.
MENU button (57) Displays the menu screen for setting up the menu item.
MOVIE button (33, 103) Records movies.
AEL button (121)/AV
button (99)/ button
(51)/ button (50)
Fixes the exposure of the entire screen./Sets up the
aperture value./Displays multiple images on the screen
simultaneously./Scales down an image that has been
scaled up when viewing images.
button (138)/Focus
Magnifier button (115)/
button (50)
Zooms in to the center of an image./Allows you to check
the focus by enlarging the image before shooting./Scales
an image up when viewing images.
Fn button (54, 55)/
button (146)
Displays the setup screen of the function that is set using
the Fn button./Rotates images.
Control button Sets up the following functions: Display (47, 81, 144),
White Balance (134), Drive mode (46, 139), Picture
Effect (131), and Autofocus (108).
button (34) Plays back images.
button (64)/ button
(35)
Displays a shooting tip or In-Camera Guide./Deletes
images.
Focus mode switch (108,
114)
Switches the autofocus and manual focus.
Preview button (97) Checks blurring of the background.
54
Selecting a function with the Fn
(Function) button
This button is used for setting up or executing functions used frequently in
shooting.
To set up the camera directly from the recording information screen
Turn the control dial without pressing the center z in step 2. You can set
up the camera directly from the recording information screen.
1Press the Fn button.
2Select the desired item with v/V/b/B on the control button,
then press the center z to execute.
The setup screen appears.
3Following the operation guide,
select and execute the desired
function.
Operation guide
55
Functions list
Functions that can be selected with
the Fn (Function) button
The functions that can be selected with the Fn button are as follows:
Scene Selection (39,
89)
Selects an appropriate mode from among the Scene Selection
preset settings to suit shooting conditions.
(Portrait/Sports Action/Macro/Landscape/Sunset/Night
Scene/Hand-held Twilight/Night Portrait)
Movie (104) Selects the exposure mode to suit your subject or your effect.
(P/A/S/M)
Drive Mode (46, 139) Sets the drive mode such as continuous shooting.
(Single Shooting/Cont. Shooting/Self-timer/Bracket: Cont./
Single Bracket/WB bracket/Remote Cdr.)
Flash Mode (42, 124) Sets the flash mode.
(Flash Off/Autoflash/Fill-flash/Slow Sync./Rear Sync./
Wireless)
Autofocus Mode
(111)
Selects the method for focusing according to movement of
the subject.
(Single-shot AF/Automatic AF/Continuous AF)
AF area (112) Selects the area of focus.
(Wide/Zone/Spot/Local)
Object Tracking (112) Keeps the focus on a subject while tracking it.
(On/Off)
Face Detection (117) Automatically captures people’s face(s) with the optimal
focus and exposure.
(On/On (Regist. Faces)/Off)
Smile Shutter (119) Shoots when a smile is detected.
(On/Off)
ISO (127) Sets the sensitivity to light. The larger the number, the faster
the shutter speed.
(Multi Frame Noise Reduct./ISO AUTO to 16000)
Metering Mode (122) Selects the method for measuring brightness.
(Multi segment/Center weighted/Spot)
Flash Comp. (122) Adjusts the intensity of flash output.
(+2.0EV to –2.0EV)
White Balance (134) Adjusts the color tone of images.
(Auto WB/Daylight/Shade/Cloudy/Incandescent/Fluor.:
Warm White/Fluor.: Cool White/Fluor.: Day White/Fluor.:
Daylight/Flash/Color Temp./Color Filter/Custom)
56
Functions that can be selected with the Fn (Function) button
DRO/Auto HDR (128) Compensates for the brightness and contrast automatically.
(Off/D-Range Opt./Auto HDR)
Creative Style (132) Selects your desired image processing.
(Standard/Vivid/Portrait/Landscape/Sunset/Black & White)
Picture Effect (131) Shoots with the desired effect filter to achieve more
impressive expression.
(Off/Toy Camera/Pop Color/Posterization/Retro Photo/Soft
High-key/Partial Color/High Contrast Mono./Soft Focus/
HDR Painting/Rich-tone Mono./Miniature)
57
Functions list
The functions selected with the MENU
button
You can set up the basic settings for the camera as a whole or execute
functions such as shooting, playback, or other operations.
Press the MENU button, then set up the desired item with v/V/b/B on the
control button, then press the center of the control button.
Still shooting menu
Select a page of the menu Select an item on the menu
Image Size (48) Selects the size of still images.
(L:24M/M:12M/S:6.0M (When [Aspect Ratio] is set to 3:2)
L:20M/M:10M/S:5.1M (When [Aspect Ratio] is set to 16:9))
Aspect Ratio (157) Selects the aspect ratio for still images.
(3:2/16:9)
Quality (157) Sets the image quality for still images.
(RAW/RAW & JPEG/Fine/Standard)
Panorama: Size (48) Selects the size of panoramic images.
(Standard/Wide)
Panorama: Direction
(93)
Sets the shooting direction for panoramic images.
(Right/Left/Up/Down)
3D Pan.: Image Size
(48)
Selects the size of 3D-images.
(16:9/Standard/Wide)
3D Pan.: Direction
(93)
Sets the shooting direction for 3D-images.
(Right/Left)
Long Exposure NR
(159)
Sets noise reduction processing for shots in which shutter
speed will be 1 second or longer.
(On/Off)
58
The functions selected with the MENU button
Movie shooting menu
Custom menu
High ISO NR (159) Sets noise reduction processing for high-sensitivity shooting.
(High/Normal/Low)
Flash control (123) Sets the method for determining the intensity of flash output.
(ADI flash/Pre-flash TTL)
AF Illuminator (125) Sets the AF illuminator, which sheds light on a dark scene to
aid focusing.
(Auto/Off)
Color Space (160) Changes the range of reproducible colors.
(sRGB/AdobeRGB)
SteadyShot (86) Sets SteadyShot.
(On/Off)
Shooting Tip List (64) Allows you to access all shooting tips.
File Format (105) Selects the movie file format.
(AVCHD 60i/60p/AVCHD 50i/50p/MP4)
Record Setting (106) Selects the size of the recorded movie frame.
(60i 24M(FX)/50i 24M(FX)/60i 17M(FH)/50i 17M(FH)/60p
28M(PS)/50p 28M(PS)/24p 24M(FX)/25p 24M(FX)/24p
17M(FH)/25p 17M(FH)/1440×1080 12M/VGA 3M)
Audio Recording
(107)
Sets whether or not to record audio when shooting a movie.
(On/Off)
Wind Noise Reduct.
(107)
Reduces wind noise during movie recording.
(On/Off)
SteadyShot (86) Sets SteadyShot.
(On/Off)
Eye-Start AF (80) Sets whether or not to use auto focus when you look through
the viewfinder.
(On/Off)
FINDER/LCD Setting
(164)
Sets the method for switching between the viewfinder and
LCD monitor.
(Auto/Manual)
Red Eye Reduction Reduces the red-eye phenomenon during flash use.
(On/Off)
59
The functions selected with the MENU button
Functions list
Release w/o Lens
(160)
Sets whether shutter can open when lens is not attached.
(Enable/Disable)
Auto+ Cont. Shooting
(88)
Sets whether or not to shoot continuously in AUTO+ mode.
(Auto/Off)
Auto+ Image Extract.
(88)
Sets whether or not to save all the images that were shot
continuously in AUTO+ mode.
(Auto/Off)
Grid Line (161) Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Auto Review (161) Displays the captured image after shooting. Sets auto review.
(10 Sec/5 Sec/2 Sec/Off)
DISP Button(Monitor)
(81)
Allows you to select the available screen display modes of
the LCD monitor that can be selected by pressing DISP on
the control button.
(Graphic Display/Display All Info./No Disp. Info./Level/
Histogram/For viewfinder)
DISP Button(Finder)
(81)
Allows you to select the available screen display modes of
the viewfinder that can be selected by pressing DISP on the
control button.
(Graphic Display/Display All Info./No Disp. Info./Level/
Histogram)
Peaking Level (115) Enhances the outline of in-focus ranges with a specific color.
(High/Mid/Low/Off)
Peaking Color (115) Sets the color used for the peaking function.
(Red/Yellow/White)
Live View Display
(83)
Sets whether or not to display the effect of a function on the
screen, such as the effect of the exposure compensation
value.
(Setting Effect ON/Setting Effect OFF)
60
The functions selected with the MENU button
Func. of AEL button
(161)
Assigns the desired function to the AEL button.
(Exposure Comp./Drive Mode/Flash Mode/Autofocus Mode/
AF area/Face Detection/Smile Shutter/ISO/Metering Mode/
Flash Comp./White Balance/DRO/Auto HDR/Creative Style/
Picture Effect/Image Size/Quality/AEL hold/AEL toggle/
AEL hold/ AEL toggle/Object Tracking/AF lock/Aperture
Preview/Shot. Result Preview/Smart Telecon./Focus
Magnifier)
ISO Button (162) Assigns the desired function to the ISO button.
(Exposure Comp./Drive Mode/Flash Mode/Autofocus Mode/
AF area/Face Detection/Smile Shutter/ISO/Metering Mode/
Flash Comp./White Balance/DRO/Auto HDR/Creative Style/
Picture Effect/Image Size/Quality/AEL hold/AEL toggle/
AEL hold/ AEL toggle/Object Tracking/AF lock/Aperture
Preview/Shot. Result Preview/Smart Telecon./Focus
Magnifier)
Preview Button (162) Selects the method to be used for the operating preview
button.
(Shot. Result Preview/Aperture Preview)
Focus Hold Button Sets the function of the focus hold button of the lens.
(Focus Hold/D.O.F.Preview)
Smart Telecon.
Button (115, 138)
Selects the operation method for the button.
(Smart Telecon./Focus Magnifier)
Lens Comp.: Shading
(165)
Compensates for the shaded corners of the screen caused by
the lens attached.
(Auto/Off)
Lens Comp.: Chro.
Aber. (165)
Reduces the color deviation at the corners of the screen
caused by the lens attached.
(Auto/Off)
Lens Comp.:
Distortion (165)
Compensates for distortion on the screen caused by the lens
attached.
(Auto/Off)
61
The functions selected with the MENU button
Functions list
Playback menu
Memory Card Tool menu
Front Curtain Shutter
(162)
Sets whether or not to use the electronic front curtain shutter
function.
(On/Off)
Face Registration
(118)
Registers or changes the person to be given priority in the
focus.
(New Registration/Order Exchanging/Delete/Delete All)
Delete (35, 150) Deletes images.
(Multiple Img./All in Folder/All AVCHD view files)
View Mode (146) Allows you to determine how to group the playback images.
(Folder View(Still)/Folder View(MP4)/AVCHD View)
Slide Show (147) Shows a slide show.
(Repeat/Interval/Image Type)
Image Index (51) Displays the image list.
(4 Images/9 Images)
3D Viewing (152) Plays back 3D-images using a 3D-compatible TV connected
to the camera.
Protect (149) Protects or cancels protection for an image.
(Multiple Img./Cancel All Images/Cancel All Movies(MP4)/
Cancel All AVCHD view files)
Specify Printing
(182)
Specifies or unspecifies the images for DPOF.
(DPOF Setup/Date Imprint)
Volume Settings Sets the volume for movie playback.
Playback Display
(147)
Sets how to play back an image recorded in portrait.
(Auto Rotate/Manual Rotate)
Format (166) Formats the memory card.
File Number (166) Sets the method used to assign file numbers to still images
and movies.
(Series/Reset)
62
The functions selected with the MENU button
Clock setup menu
Setup menu
Folder Name (166) Sets the folder format for still images.
(Standard Form/Date Form)
Select REC Folder
(167)
Changes the selected folder for storing still images.
New Folder (167) Creates a new folder for storing still images and movies.
Recover Image DB
(168)
Recovers the image database file and enables recording and
playback.
Display Card Space Displays the remaining recording time of movies and the
recordable number of still images on the memory card.
Date/Time Setup (28) Sets date and time, and daylight savings.
Area Setting (29) Sets the location of use.
Menu start Sets the default position of the cursor on the menu to the top
item or the last-selected item.
(Top/Previous)
LCD Brightness (163) Sets the brightness of the LCD monitor.
(Auto/Manual)
Viewfinder Bright.
(163)
Sets the brightness of the viewfinder.
(Auto/Manual)
GPS Settings (154)
(SLT-A65V only)
Sets the GPS functions.
Power Save (164) Sets the interval after which power save mode engages.
(30 Min/5 Min/1 Min/20 Sec/10 Sec)
HDMI Resolution
(152)
Sets the resolution when the camera is connected to an HDMI
TV.
(Auto/1080p/1080i)
CTRL FOR HDMI
(153)
Operates the camera from a TV that support “BRAVIA”
Sync.
(On/Off)
63
The functions selected with the MENU button
Functions list
* Appears when an Eye-Fi card (sold separately) is inserted in the camera.
Upload Settings*
(168)
Sets the upload function of the camera when using an Eye-Fi
card.
(On/Off)
USB Connection
(175)
Sets the USB connection method.
(Auto/Mass Storage/MTP)
Audio signals Sets whether or not to use the beep sound when the focus is
achieved or the self-timer is working.
(On/Off)
Cleaning Mode (184) Starts the cleaning mode to clean the image sensor.
Version (174) Displays the camera software version.
Language Selects the language.
Mode Dial Guide Turns on or off the mode dial guide (the explanation of each
shooting mode).
(On/Off)
Demo Mode Sets the demonstration playback of a movie to on or off.
(On/Off)
Initialize (170) Restores the settings to their defaults.
(Reset Default/Rec mode reset/Custom reset)
64
Using the guide function of the camera
The camera displays the shooting tips in accordance with the shooting
mode selected.
To access all shooting tips
You can search through all the shooting tips from the menu.
Use this item when you want to read shooting tips you have seen before.
In-Camera Guide
When you press the (In-Camera Guide)
button on the Fn screen or menu screen, a
guide in accordance with the currently
selected function or setting appears
automatically.
Select unavailable functions or settings
on the Fn screen, then press the center of
the control button, the appropriate setup
is indicated in order to enable them.
(In-Camera Guide) button
Shooting Tip
1Press the (In-Camera Guide)
button when the recording
information display is displayed.
A shooting tip list in accordance with the
current subject appears automatically.
(In-Camera Guide) button
2Select the desired shooting tip with v/V on the control button,
then press the center of the control button.
The shooting tip is displayed.
• You can scroll the screen with v/V.
• You can select the item with b/B.
65
Using the guide function of the camera
Functions list
MENU button t 2 t [Shooting Tip List]t Select the desired
shooting tip
• You can access a tip from the [Table of contents].
66
Viewing images on a computer
Using with your computer
Following applications are contained on the CD-ROM (supplied) to allow
more versatile use of images shot with your camera.
• “Image Data Converter”
• “PMB” (Picture Motion Browser)
If “PMB” has already been installed on the computer, and the version
number of the previously installed “PMB” is lower than that of the “PMB”
on the CD-ROM (supplied), install “PMB” also from the CD-ROM
(supplied).
For detailed notes on installation, also see page 68.
Note
• “PMB” is not compatible with Macintosh computers.
The following computer environment is recommended when using the
supplied software and importing images via a USB connection.
* 64-bit editions and Starter (Edition) are not supported. Windows Image
Mastering API (IMAPI) Ver.2.0 or later is required to use the function
for creating discs.
** Starter (Edition) is not supported.
Recommended computer environment (Windows)
OS (pre-installed) Microsoft Windows XP* SP3/Windows Vista** SP2/
Windows 7 SP1
“PMB” CPU: Intel Pentium III 800 MHz or faster
(For playing/editing the High Definition movies: Intel Core
Duo 1.66 GHz or faster/Intel Core 2 Duo 1.66 GHz or faster,
Intel Core 2 Duo 2.26 GHz or faster (HD FX/HD FH), Intel
Core 2 Duo 2.40 GHz or faster (HD PS))
Memory: 512 MB or more (For playing/editing the High
Definition movies: 1 GB or more)
Hard Disk: Disk space required for installation-
approximately 500 MB
Display: Screen resolution-1024 × 768 dots or more
“Image Data
Converter Ver.4”
CPU/Memory: Pentium 4 or faster/1 GB or more
Display: 1024 × 768 dots or more
67
Using with your computer
Viewing images on a computer
The following computer environment is recommended when using the
supplied software and importing images via a USB connection.
Notes
• Operation is not assured in an environment based on an upgrade of the operating
systems described above or in a multi-boot environment.
• If you connect 2 or more USB devices to a single computer at the same time, some
devices, including the camera, may not operate, depending on the types of USB
devices you are using.
• Connecting the camera using a USB interface that is compatible with Hi-Speed USB
(USB 2.0 compliant) allows advanced transfer (high speed transfer), as the camera is
compatible with Hi-Speed USB (USB 2.0 compliant).
• When your computer resumes activity from suspend or sleep mode, communication
between the camera and your computer may not recover at the same time.
Recommended computer environment (Macintosh)
OS (pre-installed) USB Connection: Mac OS X (v10.3, 10.4, 10.5, 10.6)
“Image Data Converter Ver.4”: Mac OS X (v10.5, 10.6
(Snow Leopard))
“Image Data
Converter Ver.4”
CPU: Intel Core Solo/Core Duo/Core 2 Duo or faster
Memory: 1 GB or more is recommended.
Display: 1024 × 768 dots or more
68
Using the software
Log on as Administrator.
Notes
• If “PMB” has already been installed on the computer, and the version of the
previously installed “PMB” is higher than that of the “PMB” on the CD-ROM
(supplied), installation is not required. The usable functions are activated when the
camera is connected to the computer using the USB cable.
Installing the software (Windows)
1Turn on your computer, and insert the CD-ROM (supplied) into
the CD-ROM drive.
The installation menu screen appears.
• If it does not appear, double-click [Computer] (For Windows XP: [My
Computer]) t (SONYPMB) t [Install.exe].
• If the AutoPlay screen appears, select “Run Install.exe” and follow the
instructions that appear on the screen to proceed with the installation.
2Click [Install].
Make sure that both “Image Data Converter” and “PMB” are checked and
follow the instructions on the screen.
• Connect the camera to the computer during the procedure following the
instructions on the screen (page 175).
• When the restarting confirmation message appears, restart the computer
following the instructions on the screen.
• DirectX may be installed depending on the system environment of your
computer.
3Remove the CD-ROM after the installation is complete.
The following software is installed and shortcut icons appear on the desktop.
“Image Data Converter”
“PMB”
“PMB Launcher”
“PMB Help”
69
Using the software
Viewing images on a computer
• If a version of “PMB” under 5.0.00 has been installed on your computer, you may be
unable to use some functions of those “PMB” when installing the “PMB” from the
supplied CD-ROM. Also, “PMB Launcher” is installed from the supplied CD-ROM
and you can start “PMB” or other software by using the “PMB Launcher.” Double-
click the “PMB Launcher” short-cut icon on the computer screen to start “PMB
Launcher.”
Log on as Administrator.
With “Image Data Converter” you can do the following, etc.:
• To edit images recorded in RAW format with various corrections, such as
tone curve, and sharpness.
• To adjust images with white balance, exposure, and creative style, etc.
• To save the images displayed and edited on a computer.
• You can either save the image as RAW format or save it in the general
file format.
• To display and compare RAW/JPEG images recorded with this camera.
• To rate the images on a scale of five.
• To set color labels.
Installing the software (Macintosh)
1Turn on your Macintosh computer, and insert the CD-ROM
(supplied) into the CD-ROM drive.
2Double-click the CD-ROM icon.
3Copy the [IDC_INST.pkg] file in the [MAC] folder to the hard
disk icon.
4Double-click the [IDC_INST.pkg] file in the copy-to folder.
Follow the instructions on the screen to complete the installation.
Using “Image Data Converter”
70
Using the software
To use “Image Data Converter,” refer to Help.
Click [Start] t [All Programs] t [Image Data Converter] t [Help] t
[Image Data Converter Ver.4].
With “PMB” you can do the following, etc.:
• To set images shot with the camera and display them on the computer.
• To organize images on the computer on a calendar by shooting date to
view them.
• To retouch (red-eye reduction, etc.), print, send still images as e-mail
attachments, and change the shooting date.
• To display the shooting location of the image on the map (SLT-A65V
only).
• To print or save still images with the date.
• To create Blu-ray discs or DVD discs from AVCHD View movies
imported to a computer. (An Internet connection environment is required
when a Blu-ray disc/DVD disc is created for the first time.)
Notes
• “PMB” is not compatible with Macintosh computers.
• Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i
24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are
converted by “PMB” in order to create an AVCHD disc. This conversion can take a
long time. Also, you cannot create a disc with the original image quality. If you want
to keep the original image quality, you must store your movies on a Blu-ray disc.
• “AVCHD View movies” are movies that were recorded in the [AVCHD 60i/60p]/
[AVCHD 50i/50p] mode of [File Format].
Using “PMB”
71
Using the software
Viewing images on a computer
To use “PMB,” refer to “PMB Help.”
Double-click the shortcut of (PMB Help) on the desktop. Or, click
[Start] t [All Programs] t [PMB] t [PMB Help].
“PMB” support page (English only)
http://www.sony.co.jp/pmb-se/
72
Selecting the method for creating a
disc of movies
You can create a disc from AVCHD View movies that have been recorded
with this camera.
Depending on the disc type, playable devices may vary. Select the method
that suits your disc player.
Here, 2 ways of creating a disc of movies are described; creating a disc with
a computer using “PMB” or creating a disc with devices other than a
computer such as a DVD writer.
You can import AVCHD View movies to a computer using “PMB” and
create an AVCHD format disc or a standard definition image quality (STD)
disc.
For details on the method for creating a disc using “PMB,” see “PMB
Help.”
Notes
• To create Blu-ray discs, be sure to install [BD Add-on Software] from the “PMB”
installation screen.
Player Disc type Feature
Blu-ray disc playback
devices
(Blu-ray disc player,
PlayStation®3, etc.)
Using a Blu-ray disc enables you to record
high-definition image quality (HD) movies
of a longer duration than DVD discs.
AVCHD format
playback devices
(Sony Blu-ray disc
player, PlayStation®3,
etc.)
High-definition image quality (HD) movies
can be recorded on DVD media, such as
DVD-R discs, and a high-definition image
quality (HD) disc is created.
• You cannot play a high-definition image
quality (HD) disc on ordinary DVD
players.
Ordinary DVD playback
devices
(DVD player, computer
that can play DVDs,
etc.)
Standard definition image quality (STD)
movies converted from high-definition
image quality (HD) movies can be recorded
on DVD media, such as DVD-R discs, and a
standard definition image quality (STD)
disc is created.
Creating a disc using a computer
73
Selecting the method for creating a disc of movies
Viewing images on a computer
• The PlayStation®3 may not be available in some countries/regions.
• Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i
24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are converted
by “PMB” in order to create an AVCHD disc. This conversion can take a long time.
Also, you cannot create a disc with the original image quality. If you want to keep the
original image quality, you must store your movies on a Blu-ray disc (page 180).
• To play back movies recorded with the [60p 28M(PS)]/[50p 28M(PS)] setting on a
Blu-ray disc, the device that is compatible with the AVCHD Ver 2.0 format is required.
• “AVCHD View movies” are movies that were recorded in the [AVCHD 60i/60p]/
[AVCHD 50i/50p] mode of [File Format].
You can create a disc with a Blu-ray disc recorder and DVD writer.
The disc type you can create depends on the device used.
Notes
• For details on how to create a disc, refer to the operating instructions of the device
you use.
• If you create a disc using Sony DVDirect (DVD Writer), use the memory card slot of
the DVD Writer or connect the DVD Writer via USB connection to transfer the data.
• If you use Sony DVDirect (DVD Writer), check that the firmware is updated to the
newest version.
For details, see the following URL:
http://sony.storagesupport.com/
• To copy movies recorded with the [60p 28M(PS)]/[50p 28M(PS)] setting to a Blu-
ray disc, the device that is compatible with the AVCHD Ver 2.0 format is required.
To play back the created Blu-ray disc, the device that is compatible with the
AVCHD Ver 2.0 format is required.
Creating a disc with a device other than a computer
Device Disc type
Blu-ray disc recorder: To create a Blu-
ray disc or DVD with standard image
quality (STD)
DVD writer other than DVDirect
Express: To create an AVCHD disc or
DVD with standard image quality
(STD)
HDD recorder, etc.: To create a DVD
with standard image quality (STD)
74
Others
List of icons on the screen
Graphic Display (LCD monitor)
Display All Info. (LCD monitor)
For playback (Basic information
display)
A
Display Indication
P A S
M
Exposure mode (37)
Scene Recognition icons
(38, 88)
Memory card (22, 206)/
Upload (168)
100 Remaining number of
recordable images
Aspect ratio of still
images (157)
3D Sweep Panorama (40,
91)
24M 12M
6.0M 20M
10M 5.1M
Image size of still images
(48)
Image quality of still
images (157)
Frame rate of movies
(106)
75
List of icons on the screen
Others
B
C
D
Image size of movies
(106)
100% Remaining battery (23)
Flash charge in progress
(42)
Setting Effect OFF (83)
No audio recording of
movies (107)
SteadyShot/Camera
shake warning (86)
GPS triangulating status
(154) (SLT-A65V only)
SteadyShot error (195)
Overheating warning (11)
Database file full (197)/
Database file error (197)
View Mode (146)
100-0003 Folder - file number
(177)
-Protect (149)
DPOF DPOF set (182)
Remaining battery
warning (23)
Display Indication
Spot metering area (122)
AF area (112)
Smart teleconverter (138)
Display Indication
Shutter speed indicator
(47)
Aperture indicator (47)
Display Indication
REC 0:12 Recording time of the
movie (m:s)
z Focus (32, 109)
1/250 Shutter speed (97)
F3.5 Aperture (95)
EV scale (44, 100, 141)
(Only for viewfinder)
+3.0 Exposure compensation
(44)
AE lock (121)
GPS information (SLT-
A65V only)
35° 37’
32”N
139° 44’
31”W
Latitude and longitude
display (SLT-A65V only)
Auto HDR image
warning (129)
Picture Effect error (132)
ISO400 ISO sensitivity (127)
3/7 File number/Number of
images in the view mode
2011-1-1
10:37AM
Date of recording
Display Indication
Drive mode (46, 139)
Display Indication
76
List of icons on the screen
E
Flash mode (42, 124)/
Red-eye reduction (58)
Focus mode (111)
AF area (112)
Object tracking (112)
Face Detection (117)
Smile Shutter (119)
Smile Detection
Sensitivity indicator
(119)
Display Indication
Metering mode (122)
Flash compensation (122)
AWB
7500K
A5 G5
White balance (Auto,
Preset, Custom, Color
temperature, Color filter)
(134)
D-Range Optimizer
(128)/Auto HDR (129)
+3 +3 +3
Creative Style (132)/
Contrast, Saturation,
Sharpness
Display Indication
Picture Effect (131)
Display Indication
77
Others
Functions available for each shooting
mode
The functions you can use depend on the selected shooting mode.
In the table below, indicates the function available. – indicates the
function not available.
The functions you cannot use are displayed in gray on the screen.
* When [Manual Exposure] is selected, this function is not available.
Shoot Mode Exposure
Comp. (44)
Self-timer
(140)
Cont.
Shooting
(139)
Face
Detection
(117)
Smile
Shutter
(119)
(31, 88) –
(31, 88) –
(38, 88) –
(39, 89) ––
–
––
––
––
––
––– –
––
(40, 91) ––––
(40, 91) ––––
(41, 93) ––––
(94)
(95)
(97)
(99) –
(33, 103) *–
78
Flash modes available
The flash modes you can select depend on the shooting mode and functions
selected.
In the table below, indicates the function selectable. – indicates the
function not selectable.
The flash modes you cannot select are displayed in gray on the screen.
Shoot Mode
(Flash
Off)
(Autoflash)
(Fill-
flash)
(Slow
Sync.)
(Rear
Sync.)
(Wireless)
(31,
88)
–––
(31, 88) –––––
(38,
88)
–––
(39, 89)
–––
––––
–––
––––
––––
–––––
–––––
––––
(40, 91) –––––
(40, 91) –––––
(41, 93) ––
(94) ––
(95) ––
(97) ––
(99) ––
(33, 103) –––––
79
Preparation (Advanced operations)
Preparation
Advanced operations
This section provides further information
on the camera.
80
Setting up the camera
When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the eyecup.
Note
• When the FDA-A1AM Angle Finder (sold separately) is attached to the camera,
setting [Eye-Start AF] to [Off] is recommended because the eyepiece sensors located
above the viewfinder may be activated.
Removing the eyecup
Carefully slide the eyecup off by
pushing on each side of the eyecup.
• Put your fingers under the eyecup, and
slide it upward.
81
Preparation (Advanced operations)
The screen displayed for shooting
mode
You can select the desired screen mode. When you switch the screen by
pressing DISP on the control button (page 47), only selected screens are
displayed. You can set the available screens to be displayed on the LCD
monitor and the viewfinder separately.
Selecting the screen mode
1MENU button t 2 t [DISP Button(Monitor)] or [DISP
Button(Finder)]
2Select the desired display with v/V/b/B on the control button,
then press the center of the control button.
3Press the MENU button.
82
The screen displayed for shooting mode
Notes
• The histogram does not indicate the final recorded image. It indicates the condition
of the image just monitored on the screen. The histogram will differ based on
aperture setting, etc.
• The histogram differs between shooting and playback in the following situations:
– When firing the flash.
– When the subject has low intensity, such as night scenery.
Histogram
The histogram displays the luminance
distribution that shows how many pixels
of a particular brightness exist in the
picture.
The exposure compensation will change
the histogram accordingly.
Both ends of the histogram show a high-
key or low-key portion. You cannot
restore these area with a computer later.
Adjust the exposure if necessary and
shoot again.
Number of pixels
Dark Light
83
The screen displayed for shooting mode
Preparation (Advanced operations)
Notes
• The error of the digital level gauge is larger if you tilt the camera too far forward or
backward.
• A tilt of ±1° may be indicated even if the camera is almost level.
You can monitor the subject through the lens without effects, such as the
exposure compensation, white balance, Creative Style, Picture Effect etc.,
displayed.
MENU button t 2 t [Live View Display] t [Setting Effect
OFF]
• When [Setting Effect OFF] is selected, the Live View image in M mode
is always displayed with the appropriate brightness.
Note
• [Setting Effect OFF] cannot be selected when the exposure mode is set to AUTO,
AUTO+, Sweep Panorama, 3D Sweep Panorama, Movie or Scene Selection.
The digital level gauge
The digital level gauge indicates whether
the camera is level in both the horizontal
and front-back directions. When the
camera is level in one direction, the
indicator turns to green.
Horizontal direction
Front-back direction
Monitoring the subject through the lens without effects
displayed
84
The screen displayed for shooting mode
When [For viewfinder] in [DISP Button(Monitor)] is activated, you can set
the status of the LCD monitor to one suitable for used with the viewfinder,
by pressing DISP on the control button.
See pages in parentheses for details of operation.
A
List of icons for viewfinder mode
In AUTO, AUTO+, or
Scene Selection mode
In Continuous Advance Priority AE/
P/A/S/M mode
Display Indication
P A S
M
Exposure mode (37)
Memory card (22, 206)/
Upload (168)
100 Remaining number of
recordable images
Aspect ratio of still
images (157)
3D Sweep Panorama (40,
91)
24M 12M
6.0M 20M
10M 5.1M
Image size of still images
(48)
Image quality of still
images (157)
Frame rate of movies
(106)
Image size of movies
(106)
100% Remaining battery (23)
Display Indication
85
The screen displayed for shooting mode
Preparation (Advanced operations)
B
C
Flash charge in progress
(42)
Setting Effect OFF (83)
No audio recording of
movies (107)
SteadyShot/Camera
shake warning (86)
GPS triangulating status
(154) (SLT-A65V only)
SteadyShot error (195)
Overheating warning (11)
Database file full (197)/
Database file error (197)
Display Indication
Drive mode (46, 139)
Flash mode (42, 124)/
Red-eye reduction (58)
Focus mode (111)
AF area (112)
Object Tracking (112)
Face Detection (117)
Metering mode (122)
Display Indication
AWB
7500K
A5 G5
White balance (Auto,
Preset, Custom, Color
temperature, Color filter)
(134)
D-Range Optimizer
(128)/Auto HDR (129)
+3 +3 +3
Creative Style (132)/
Contrast, Saturation,
Sharpness
Picture Effect (131)
Smile Shutter (119)
Exposure compensation
(44)/Metered Manual
(100)
Flash compensation (122)
EV scale (44, 100, 141)
Display Indication
1/125 Shutter speed (97)
F2.8 Aperture (95)
ISO AUTO ISO sensitivity (127)
AE lock (121)
Display Indication
86
Shooting a clear image without camera
shake
“Camera shake” refers to unwanted movement of the camera that occurs
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.
Note
• The (Camera shake warning) indicator is displayed only in the modes that
automatically set the shutter speed. This indicator is not displayed in M/S modes or
when you record movies.
The SteadyShot function is available with this camera to reduce camera
shake. The SteadyShot function can be set separately for still image
shooting and for movie recording.
The SteadyShot function is set to [On] in the default settings.
MENU button t 2 or 1 t [SteadyShot] t Select the
desired setting
Note
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
Camera shake warning indicator
Due to potential camera shake, the
(Camera shake warning) indicator
flashes. In this case, use a tripod or the
flash.
(Camera shake warning)
indicator
Using the SteadyShot function
87
Shooting a clear image without camera shake
Preparation (Advanced operations)
In the following cases, we recommend that you mount the camera on a
tripod.
• Shooting without a flash under dark conditions.
• Shooting with slow shutter speeds, which are typically used in night-time
shooting.
• Shooting a close subject, such as in macro shooting.
• Shooting with a telescopic lens.
Note
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the SteadyShot function.
Using a tripod
88
Shooting (Advanced operations)
Shooting
Selecting the shooting mode
Set the mode dial to , and shoot images (page 31).
• Select when shooting in a location where the use of a flash is
restricted.
Note
• Since the camera turns on the automatic setting function, many features will be
unavailable, such as exposure compensation, ISO setting. If you want to adjust
various settings, set the mode dial to P, then shoot your subject.
Set the mode dial to (Auto+), and shoot images (page 38).
To set the continuous shooting
MENU button t 1 t [Auto+ Cont. Shooting] t Select the
desired setting
To select the storage method to be used for recorded images
In continuous shooting, you can select a storage method that allows the
camera either to store 1 appropriate image from among the continuously
shot images or store all the images.
MENU button t 1 t [Auto+ Image Extract.] t Select the
desired setting
Notes
• Even when you set [Auto+ Image Extract.] to [Off] with [Hand-held Twilight]
selected from recognized scene mode, 1 combined image is saved.
• The numbers of images that were not saved are skipped when the images are
extracted.
AUTO/ Flash Off
89
Selecting the shooting mode
Shooting (Advanced operations)
Set the mode dial to (Scene Selection), select the desired
mode, and shoot images (page 39).
Scene Selection
This mode is suitable for
zShooting with preset settings according to the scene
(Portrait) Blurs away backgrounds and sharpens
the subject. Expresses skin tones softly.
• To blur the background more, set the
lens to the telephoto position.
• You can shoot a vivid image by
focusing on the eye that is closer to
the lens.
• Use the lens hood to shoot backlit subjects.
• Use the red-eye reduction function if the eyes of your
subject turn red from the flash (page 58).
(Sports Action) Shoots a moving subject at a fast
shutter speed so that the subject looks
as if it is standing still. The camera
shoots images continuously while the
shutter button is pressed.
• Press and hold the shutter button
halfway down until the right moment.
(Macro) Shoots close subjects such as flowers,
foods.
• You can shoot a closer subject using
a macro lens (sold separately).
• Set the flash mode to [Flash Off]
when you shoot a subject within 1 m
(3.3 feet).
• When shooting in macro mode, the SteadyShot function
will not be fully effective. Use a tripod to achieve better
results.
• The shortest focal distance does not change.
(Landscape) Shoots the entire range of scenery in
sharp focus with vivid colors.
• To accentuate the openness of the
scenery, set the lens to wide angle.
90
Selecting the shooting mode
• When you want finer images, set the mode dial to P, A, S, or M and use
the creative style function (page 132). In such cases, you can adjust the
exposure, ISO, etc.
(Sunset) Shoots the red of the sunrise or sunset
beautifully.
(Night Scene) Shoots night scenes at a distance
without losing the dark atmosphere of
the surroundings.
• The shutter speed is slower, so using
a tripod is recommended.
• The picture may not be taken
properly when shooting a wholly dark night scene.
(Hand-held
Twilight)
Shoots night scenes with less noise and
blur without using a tripod. A burst of
shots are taken, and image processing
is applied to reduce subject blur,
camera shake, and noise.
• Reducing blur is less effective even
in [Hand-held Twilight] when shooting:
– Subjects with erratic movement
– Subjects too close to the camera
– Subjects with a repeating pattern such as tiles, and
subjects with little contrast such as sky, sandy beach, or
lawn
– Subjects with constant change such as waves or water
falls
• In the case of [Hand-held Twilight], block noise may occur
when using a light source that flickers, such as fluorescent
lighting.
(Night Portrait) Shoots portraits in night scenes.
• The shutter speed is slower, so using
a tripod is recommended.
Shooting technique
91
Selecting the shooting mode
Shooting (Advanced operations)
Notes
• Since the camera judges the settings automatically, many features will be
unavailable, such as exposure compensation, ISO setting.
• The flash is set to [Autoflash] or [Flash Off] for each Scene Selection mode. You can
change these settings (pages 42, 124).
Set the mode dial to (Sweep Panorama) or (3D Sweep
Panorama), and shoot images (page 40).
Notes
• If you cannot pan or tilt the camera across the entire subject within the given time, a
gray area occurs in the composed image. If this happens, move the camera fast to
record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded
smoothly. While shooting, do not tilt the camera back and forth, or right and left
when you swing the camera straight ahead.
• Under low light conditions, panoramic images may be blurred or not be recorded.
• Under lights that flicker such as fluorescent light, the brightness or color of the
combined image is not always the same.
• When the whole angle of panoramic shooting and the angle in which you fixed the
focus and exposure with AE/AF lock are extremely different in brightness, color and
focus, the shooting will not be successful. If this happens, change the lock angle and
shoot again.
• [Sweep Panorama] or [3D Sweep Panorama] is not suitable when shooting:
– Moving subjects.
– Subjects too close to the camera.
– Subjects with a repeating pattern such as tiles, and subjects with little contrast such
as sky, sandy beach, or lawn.
– Subjects with constant change such as waves or water falls.
– Subjects with the sun or electric lights, etc. that are much brighter than
surroundings.
Sweep Panorama/ 3D Sweep Panorama
This mode is suitable for
zShooting expansive scenery, or high-rise buildings with dynamic composition.
zShooting 3D-images with a sense of depths and viewing them using a 3D-
compatible TV.
92
Selecting the shooting mode
• [Sweep Panorama] or [3D Sweep Panorama] recording may be discontinued in the
following situations:
– You pan or tilt the camera too fast or too slow.
– There is too much camera shake.
• The camera continues shooting during [Sweep Panorama] or [3D Sweep Panorama]
recording, and the shutter keeps clicking until the end of the shooting.
Tips for shooting a panoramic image
• In Sweep Panorama or 3D Sweep Panorama, it is recommended that you
use a wide-angle lens.
• When you use a lens that has a long focal length, pan or tilt the camera
more slowly than when you use a wide-angle lens.
• Determine the scene and press the shutter button halfway, so that you can
lock the focus, exposure, and white balance.
• If a section with greatly varied shapes or scenery is concentrated along a
screen edge, the image composition may fail. In such cases, adjust the
frame composition so that the section is in the center of the image, then
shoot again.
3D-images
Using the same operation as that for Sweep Panorama, the camera records
multiple images and combines them to create a 3D-image.
You can view these 3D images using a 3D-compatible TV. For details on
3D-shooting, see page 205.
To change the image size
You can select the image size: MENU button t 1 t [Panorama:
Size] or [3D Pan.: Image Size].
Pan or tilt the camera in an arc with a
constant velocity and in the same
direction as the indication on the screen.
[Sweep Panorama] or [3D Sweep
Panorama] is better suited for still
subjects, rather than moving ones. Radius as short as
possible
Vertical
direction
Horizontal direction
93
Selecting the shooting mode
Shooting (Advanced operations)
To set the pan or tilt direction
You can set the direction in which to pan or tilt the camera.
MENU button t 1 t [Panorama: Direction] or [3D Pan.:
Direction] t Select the desired setting
Set the mode dial to (Cont. Priority AE), and shoot images
(page 41).
• When the autofocus mode is set to [Continuous AF], the focus and the
exposure continue to be adjusted during shooting. The ISO sensitivity can
be adjusted.
• In manual focus mode or when the autofocus mode is set to [Single-shot
AF], you can adjust the ISO sensitivity and the aperture. When [Single-
shot AF] is selected, the focus is fixed at the first image.
Notes
• The Face Detection function is turned off.
• When [Auto HDR] is selected, the DRO process is performed temporarily according
to the DRO setting.
• Our measurement conditions. The speed of continuous shooting is slower,
depending on shooting conditions.
Cont. Priority AE
This mode is suitable for
zShooting a fast-moving subject continuously to capture a moment.
zShooting a child’s expressions, changing continuously from moment to
moment.
Shooting techniques
94
Selecting the shooting mode
Program Shift
Program Auto
This mode is suitable for
zUsing the automatic exposure, while keeping the custom settings for ISO
sensitivity, Creative Style, D-Range optimizer, etc.
1Set the mode dial to P.
2Set the shooting functions to your desired settings (pages 108
to 143).
• To fire the flash, press the button.
3Adjust the focus and shoot the subject.
You can temporarily change the shutter
speed and aperture value combination
with the correct exposure determined by
the camera maintained.
Rotate the control dial to select your
desired combination while the focus is
achieved.
The exposure mode indication changes to
“P*.”
95
Selecting the shooting mode
Shooting (Advanced operations)
Aperture Priority
This mode is suitable for
zPutting the subject in sharp focus and blur everything in front of and beyond the
subject. Opening the aperture narrows the range that is in focus. (Depth of field
becomes shallower.)
zShooting the depth of the scenery. Narrowing down the aperture widens the
range that is in focus. (Depth of field becomes deeper.)
1Set the mode dial to A.
2Select the aperture value (F-
number) with the control dial.
• Smaller F-number: The foreground and
background of the subject are blurred.
Larger F-number: The subject and its
foreground and background are all in
focus.
• You cannot check the blurring of an
image on the LCD monitor or in the
viewfinder. Check the recorded image
and adjust the aperture.
Aperture (F-number)
96
Selecting the shooting mode
• The shutter speed may become slower depending on the aperture value.
When the shutter speed is slower, use a tripod.
• To blur the background more, use a telephoto lens or a lens that is
equipped with a smaller aperture value (bright lens).
• You can check the approximate blurring of the image before recording
using the preview button.
Note
• Press the button when you shoot with the flash. However, the flash range differs
according to the aperture value. When you shoot with the flash, check the flash range
in “Specifications.”
3Adjust the focus and shoot the
subject.
The shutter speed is automatically
adjusted to obtain correct exposure.
• When the camera judges that the proper
exposure is not obtained with the
selected aperture value, the shutter
speed flashes. In such cases, adjust the
aperture again.
Shutter speed
Shooting techniques
97
Selecting the shooting mode
Shooting (Advanced operations)
To check blurring of the background (Preview button)
• Press the preview button after you adjust the focus.
• You can adjust the aperture in preview mode.
The LCD monitor and the viewfinder
shows an image captured with the widest
aperture. The change in aperture affects
the sharpness of the subject image,
creating a discrepancy between the
sharpness of the image before shooting
and that of the actual image.
While you are pressing the preview
button, you can see the image with the
aperture used in the actual shot so that
you can check the approximate sharpness
of the subject before shooting.
Preview button
Shutter Priority
This mode is suitable for
zShooting a moving subject at a moment in time. Use a faster shutter speed to
crisply shoot an instant of the movement.
zTracing the movement to express the dynamism and flow. Use a slower shutter
speed to shoot a trailing image of the moving subject.
1Set the mode dial to S.
98
Selecting the shooting mode
• When the shutter speed is slower, use a tripod.
• When shooting an indoor sport, select a higher ISO sensitivity.
Notes
• The (Camera shake warning) indicator is not indicated in Shutter Priority
mode.
• The higher the ISO sensitivity, the more conspicuous the noise.
• When the shutter speed is 1 second or longer, noise reduction (Long Exposure NR)
will be done for the same amount of time that the shutter was open after shooting.
You cannot do any further shooting during the reduction.
2Select the shutter speed with the
control dial.
Shutter speed
3Adjust the focus and shoot the
subject.
The aperture is automatically adjusted to
obtain correct exposure.
• When the camera judges that the proper
exposure is not obtained with the
selected shutter speed, the aperture
value flashes. In such cases, adjust the
shutter speed again.
Aperture (F-number)
Shooting techniques
99
Selecting the shooting mode
Shooting (Advanced operations)
• Press the button when you shoot with the flash. However, when using the flash, if
you close the aperture (a larger F-number) by making the shutter speed slower, the
light of the flash will not reach distant subjects.
Manual Exposure
This mode is suitable for
zShooting with the desired exposure setting by adjusting both the shutter speed
and aperture.
1Set the mode dial to M.
2Rotate the control dial to adjust
the shutter speed, and while
pressing the AV button, rotate the
control dial to adjust the aperture.
AV button
Shutter speed
Aperture (F-number)
100
Selecting the shooting mode
Notes
• The (Camera shake warning) indicator is not indicated in manual exposure
mode.
• When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode,
the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary
(page 127).
• Press the button when you shoot with the flash. However, the flash range differs
according to the aperture value. When you shoot with the flash, check the flash range
in “Specifications.”
3Shoot the image after the
exposure is set.
• Check the exposure value on the EV
scale (Metered Manual*) when
monitoring with the viewfinder.
Toward +: Images become brighter.
Toward –: Images become darker.
The b B arrow appears if the set
exposure is beyond the range of the EV
scale. The arrow starts flashing if the
difference becomes greater.
* When the camera is in M mode, it will
show an under or over compensation
value based on the correct exposure
using the index on the exposure
compensation indicator.
In viewfinder mode
Standard value
BULB
This mode is suitable for
zShooting trails of light, such as fireworks.
zShooting trails of stars.
1Set the mode dial to M.
101
Selecting the shooting mode
Shooting (Advanced operations)
• Use a tripod.
• Set the focus to infinity in manual focus mode when shooting fireworks,
etc. When the infinity position of the lens is not known, first adjust the
focus on fireworks that is set off in the same general area, then shoot
them.
2Rotate the control dial to the left
until [BULB] is indicated.
BULB
3While pressing the AV button,
rotate the control dial to adjust
the aperture (F-number).
AV button
4Press the shutter button halfway down to adjust the focus.
5Press and hold the shutter button for the duration of the
shooting.
As long as the shutter button is pressed, the shutter remains open.
Shooting techniques
102
Selecting the shooting mode
• Use the Wireless Remote Commander (sold separately) (page 142).
Pressing the SHUTTER button on the Wireless Remote Commander
triggers BULB shooting and pressing it again stops BULB shooting. You
do not need to press and hold the SHUTTER button on the Wireless
Remote Commander.
• If you use a Remote Commander that is equipped with a shutter button
lock function (sold separately), you can leave the shutter open using the
Remote Commander.
Notes
• When using a tripod, turn off the SteadyShot function (page 87).
• The longer the exposure time, the more conspicuous the noise on the image.
• After shooting, noise reduction (Long Exposure NR) will be done for the same
amount of time that the shutter was open. You cannot do any further shooting during
the reduction.
• When the Smile Shutter or Auto HDR function is activated, or when [Picture Effect]
is set to [HDR Painting] or [Rich-tone Mono.], you cannot set the shutter speed to
[BULB].
• If the Smile Shutter, Auto HDR function, or the [HDR Painting] or [Rich-tone
Mono.] setting of [Picture Effect] is used with the shutter speed set to [BULB], the
shutter speed is temporarily set to 30 seconds.
• It is recommended that you start BULB shooting after the temperature of the camera
drops to prevent the quality of the image from deteriorating.
103
Shooting (Advanced operations)
Movie recording setup
Movie recording can be started from any exposure mode.
The shutter speed and aperture value are adjusted automatically.
Press the MOVIE button to start recording (page 33).
• Start recording after you adjust the focus.
• The following settings that were set during still image shooting can be
used.
–ISO
– White Balance
– Creative Style
– Exposure compensation
– AF area
– Metering Mode
– Face Detection
– Object Tracking
– D-Range optimizer
– Lens Comp.: Shading
– Lens Comp.: Chro. Aber.
– Lens Comp.: Distortion
– Picture Effect
• ISO, exposure compensation, Object Tracking, or AF area can be
adjusted during movie recording.
• If you assign [AF lock] to the AEL button or ISO button, you can lock the
focus by pressing these buttons in autofocus mode.
Notes
• In movie recording mode, the recordable area (angle of view) is narrower than that
of still image shooting.
• When the [For viewfinder] screen is displayed on the LCD monitor, the LCD
monitor is switched to the [Display All Info.] screen at the moment movie recording
starts.
Recording movies easily
Shooting techniques
104
Movie recording setup
• Do not shoot a strong light source, such as the sun. The internal mechanism of the
camera may be damaged.
• When you import AVCHD View movies to a computer, use “PMB” (pages 66, 176).
• When you continue to shoot for a long time, the temperature of the camera rises and
the image quality may deteriorate.
• When the mark is indicated, the temperature of the camera is too high. Turn the
camera off and wait until the temperature of the camera drops. If you continue to
shoot, the camera is turned off automatically.
• Since the shutter speed and aperture are automatically adjusted, the shutter speed
will be higher and the movement of the subject may not be smooth under bright
conditions. Selecting manual focus and adjusting the shutter speed or aperture may
make the movement smoother (page 114).
• A value for the ISO sensitivity between ISO 100 and ISO 1600 can be selected when
you record movies. If you start movie recording with a value of ISO 1600 or larger
selected, the ISO sensitivity is switched to ISO 1600. When you finish recording
your movie, the ISO sensitivity setting is returned to the previous value.
• When ISO is set to [Multi Frame Noise Reduct.], [AUTO] is temporarily selected.
• You cannot select [Soft Focus], [HDR Painting], [Rich-tone Mono.], or [Miniature]
in Picture Effect. When movie recording starts, Picture Effect is temporarily set to
[Off].
You can record movies with the shutter speed and aperture adjusted,
controlling the background defocus or fluidity as intended.
Recording movies with the shutter speed and aperture
adjusted
1Set the focus mode switch to MF (page 114).
2Set the mode dial to (Movie).
3Select the desired mode with v/V on the control button, then
press the center of the control button.
• To change the mode, press the Fn button, then select another mode.
4Adjust the shutter speed and aperture value with the control
dial.
105
Movie recording setup
Shooting (Advanced operations)
MENU button t 1 t [File Format] t Select the desired
format
5Adjust the focus, then press the MOVIE button to start
recording.
(Program Auto)
(94)
Allows you to shoot with the exposure adjusted automatically
(both the shutter speed and the aperture value). The other
settings can be adjusted manually, and your setting values
can be saved.
(Aperture
Priority) (95)
Allows you to shoot after adjusting the aperture value
manually using the control dial.
(Shutter
Priority) (97)
Allows you to shoot after adjusting the shutter speed
manually using the control dial.
(Manual
Exposure) (99)
Allows you to shoot after adjusting the exposure manually
(both the shutter speed and the aperture value) using the
control dial.
File Format
AVCHD 60i/60p*
AVCHD 50i/50p**
Records 60i/50i movies, 24p/25p movies or 60p/50p movies
in AVCHD format. This file format is suitable for viewing
the movie on a high-definition TV.
You can create a Blu-ray disc, an AVCHD disc, or a DVD-
Video disc using the supplied software “PMB.”
• 60i/50i movies are recorded at either 60 fields/second or at
50 fields/second, respectively. Both 60i and 50i movies
utilize the interlace scanning system, Dolby Digital audio,
and the AVCHD format.
• 24p/25p movies are recorded at either 24 frames/second or
at 25 frames/second, respectively. Both 24p and 25p
movies utilize the progressive scanning system, Dolby
Digital audio, and the AVCHD format.
• 60p/50p movies are recorded at either 60 frames/second, or
at 50 frames/second, respectively. Both 60p and 50p
movies utilize the progressive scanning system and Dolby
Digital audio.
106
Movie recording setup
* 1080 60i-compatible device
** 1080 50i-compatible device
The higher the average bit-rate, the higher the image quality.
MENU button t 1 t [Record Setting] t Select the desired
size
[File Format]: [AVCHD 60i/60p]/[AVCHD 50i/50p]
[File Format]: [MP4]
* 1080 60i-compatible device
** 1080 50i-compatible device
MP4 Records mp4 (AVC) movies. This format is suitable for
WEB uploads, e-mail attachments, etc.
• Movies are recorded in MPEG-4 format at about 30 frames/
second, utilizing the progressive scanning system, AAC
audio, and the mp4 format.
• You cannot create a disc from the movies recorded in this
format using the supplied software “PMB.”
Record Setting
File Format Average
bit-rate Recording
60i 24M(FX)*
50i 24M(FX)**
24 Mbps Records high image quality movies of 1920 × 1080
(60i/50i).
60i 17M(FH)*
50i 17M(FH)**
17 Mbps Records standard image quality movies of 1920 ×
1080 (60i/50i).
60p 28M(PS)*
50p 28M(PS)**
28 Mbps Records highest image quality movies of 1920 ×
1080 (60p/50p).
24p 24M(FX)*
25p 24M(FX)**
24 Mbps Records high image quality moves of 1920 × 1080
(24p/25p). This produces a cinema-like
atmosphere.
24p 17M(FH)*
25p 17M(FH)**
17 Mbps Records standard image quality movies of 1920 ×
1080 (24p/25p). This produces a cinema-like
atmosphere.
File Format Average
bit-rate Recording
1440×1080 12M 12 Mbps Records movies of 1440 × 1080.
VGA 3M 3 Mbps Records movies of VGA size.
107
Movie recording setup
Shooting (Advanced operations)
Notes
• Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i
24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are
converted by “PMB” in order to create an AVCHD disc. This conversion can take a
long time. Also, you cannot create a disc with the original image quality. If you want
to keep the original image quality, you must store your movies on a Blu-ray disc.
• To watch 60p/50p or 24p/25p movies on a TV, you need a TV that is compatible
with 60p/50p or 24p/25p. If you use a non-compatible TV, the movies are converted
to 60i/50i and output to the TV.
When you record movies, the operating noise of the camera or lens may be
recorded. You can record movies without audio.
MENU button t 1 t [Audio Recording] t [Off]
When the focus mode is set to manual focus, you can disable recording of
the operating noise of the lens for the autofocus (page 114).
To reduce wind noise
You can reduce wind noise by cutting bass sound input from the built-in
microphone.
MENU button t 1 t [Wind Noise Reduct.] t [On]
Notes
• Setting this item to [On] may cause some bass sound to be recorded with too low a
volume. Set it to [Off] when the wind is not blowing.
• When an external microphone (sold separately) is used, this item does not function.
Audio Recording
108
Adjusting the focus
There are 2 methods for adjusting the focus: autofocus and manual focus.
Depending on the lens, the method for switching between the auto focus
and manual focus is different.
The type of lens The switch to be
used
To switch to auto
focus
To switch to manual
focus
The lens is
equipped with a
focus mode switch
Lens (Always set
the focus mode
switch on the
camera to AF.)
Set the focus mode
switch on the lens to
AF.
Set the focus mode
switch on the lens to
MF.
The lens is not
equipped with a
focus mode switch
Camera Set the focus mode
switch on the camera
to AF.
Set the focus mode
switch on the camera
to MF.
Autofocus
1Set the focus mode switch on the
camera to AF.
2When the lens is equipped with
the focus mode switch, set it to
AF.
109
Adjusting the focus
Shooting (Advanced operations)
Note
• While the camera is focusing automatically, do not touch the rotating focusing ring.
• To select the AF area used for focusing, set up [AF area] (page 112).
Focus indicator
Subjects that may require special focusing
Using the autofocus, it is hard to focus on the following subjects. In such
cases, use the focus lock shooting feature (page 110) or manual focus
(page 114).
• A subject that is low in contrast, such as blue sky or a white wall.
• Two subjects at different distances overlapping in the AF area.
• A subject that is composed of repeating patterns, such as the facade of a
building.
• A subject that is very bright or glittering, such as the sun, the body of an
automobile, or the surface of water.
• Ambient light is not sufficient.
3Press the shutter button halfway
down to check the focus and shoot
the image.
• When the focus is confirmed, the focus
indicator changes to z or (below).
• The AF area where the focus has been
confirmed turns green.
Focus indicator
Shooting technique
Focus indicator Status
z lit Focus locked. Ready to shoot.
lit Focus is confirmed. Focal point moves following a moving
subject. Ready to shoot.
lit Still focusing. You cannot release the shutter.
z flashing Cannot focus. The shutter is locked.
AF area
110
Adjusting the focus
To measure the exact distance to the subject
Note
• If the subject is closer than the minimum shooting distance of the attached lens, the
focus cannot be confirmed. Make sure you put enough distance between the subject
and the camera.
The mark located on the top of the
camera shows the location of the image
sensor*. When you measure the exact
distance between the camera and the
subject, refer to the position of the
horizontal line.
* The image sensor is the part of the
camera that acts as the film.
Focus-lock
1Place the subject within the AF
area and press the shutter button
halfway down.
The focus is locked.
• Set [Autofocus Mode] to [Single-shot
AF].
2Keep the shutter button halfway
down, and put the subject back in
the original position to re-
compose the shot.
3Press the shutter button fully down to take the picture.
111
Adjusting the focus
Shooting (Advanced operations)
Fn button t (Autofocus Mode) t Select the desired setting
• Use [Single-shot AF] when the subject is motionless.
• Use [Continuous AF] when the subject is in motion.
Notes
• [Automatic AF] is selected when the exposure mode is set to AUTO, AUTO+ or one
of the following Scene Selection modes: [Portrait], [Landscape], [Sunset], [Night
Scene], [Night Portrait], or [Hand-held Twilight].
• [Single-shot AF] is selected when the exposure mode is set to Sweep Panorama, 3D
Sweep Panorama or [Macro] in Scene Selection.
• [Continuous AF] is selected when the exposure mode is set to [Sports Action] in
Scene Selection or when the Smile Shutter function is used.
Autofocus Mode
(Single-shot
AF)
The camera focuses and the focus is locked when you press
the shutter button halfway down.
(Automatic AF) The [Autofocus Mode] is switched between Single-shot AF
and Continuous AF according to the movement of the
subject.
When you press and hold the shutter button halfway down, if
the subject is motionless, the focus is locked and if the
subject is in motion, the camera continues to focus.
(Continuous
AF)
The camera continues to focus while the shutter button is
pressed and held halfway down.
• The audio signals will not sound when the subject is in
focus.
• Focus-lock cannot be used.
Shooting techniques
112
Adjusting the focus
Fn button t (AF area) t Select the desired setting
Notes
• [AF area] is fixed to [Wide] and you cannot select other settings when the exposure
mode is set to AUTO, AUTO+ or Scene Selection, or when the Object Tracking
function is being used or the Smile Shutter is activated.
• The AF area may not be illuminated during continuous shooting or when the shutter
button is pressed all the way down without pause.
Keeps the focusing on a moving subject while tracking it. The Object
Tracking function is set to [On] in the default setting.
AF area
Select the desired AF area to suit the
shooting conditions or your preference.
The AF area where the focus has been
confirmed turns green and the other AF
areas disappear.
AF area
(Wide) The camera determines which of the 15 AF areas is used in
focusing.
(Zone) Choose the zone for which you want to activate the focus
from among left, right, or center zone with the control button.
The camera determines which of the AF areas in the selected
zone is used in focusing. Press the AF button so that the setup
screen appears, and then select the desired zone.
(Spot) The camera uses the AF area located in the center area
exclusively.
(Local) Choose the area for which you want to activate the focus
from among 15 AF areas with the control button. Press the
AF button to display the setup screen and select the desired
area.
Object Tracking
113
Adjusting the focus
Shooting (Advanced operations)
Notes
• Tracking may be difficult in the following situations:
– The subject is moving too quickly.
– The subject is too small, or too large.
– The contrast between the subject and the background is poor.
– The subject is under dark lighting.
– The ambient light changes.
• The Object Tracking function cannot be used when the exposure mode is set to
Sweep Panorama, 3D Sweep Panorama, Continuous Advance Priority AE or [Hand-
held Twilight] in Scene Selection, or smart teleconverter is used, the manual focus
function is selected.
• The camera stops tracking a subject when the subject moves off of the screen.
When the subject to be tracked is a face
If the face disappears from the screen while the camera is tracking, and then
returns to the screen, the camera focuses on that face again.
• If you trigger Smile Shutter while tracking a face, the face becomes the
target of the smile detection feature.
1Press the center of the control button on the recording
information display.
A target frame appears.
• To turn off the Object Tracking function, press the Fn button, then set it to
[Off].
2Align the target frame with the
subject to be tracked, and press
the center of the control button.
The camera starts tracking the subject.
• To cancel this tracking feature, press
the center again.
Target frame
3Press the shutter button to shoot the subject.
114
Adjusting the focus
When it is difficult to get the proper focus in autofocus mode, you can
adjust the focus manually.
Notes
• When the Wide AF area is used, the center area is used for focusing; when the Zone
AF area is used, a typical area of the selected area is used; and when the Local AF
area is used, an area that is selected with the control button is used.
• When using a tele converter (sold separately), etc., rotation of the focusing ring may
not be smooth.
• The correct focus in the viewfinder is not achieved if the diopter is not adjusted
properly in viewfinder mode (page 30).
• Make sure to set the focus mode switch to MF for manual focus. Do not rotate the
focusing ring without setting to MF. Rotating the focusing ring forcibly without
switching to MF may damage the focusing ring.
Manual focus
1Set the focus mode switch on the
lens to MF.
2When the lens is not equipped
with the focus mode switch, set
the focus mode switch on the
camera to MF.
3Rotate the focusing ring of the
lens to achieve a sharp focus.
Focusing
ring
115
Adjusting the focus
Shooting (Advanced operations)
You can enhance the outline of in-focus ranges with a specific color in
manual focus. This function allows you to confirm the focus easily.
MENU button t 2 t [Peaking Level] t Select the desired
setting
Notes
• Since the camera judges that sharp areas are in focus, the peaking level is different,
depending on the subject, shooting situation, or on the lens used.
• The outline of in-focus ranges is not enhanced when the camera is connected using
an HDMI cable.
To set the color of the peaking function
You can set the color used for the peaking function in manual focus.
MENU button t 2 t [Peaking Color] t Select the desired
setting
Note
• This item cannot be set when [Peaking Level] is set to [Off].
You can check the focus by enlarging the image before shooting.
Peaking
Focus Magnifier
1MENU button t 3 t [Smart Telecon. Button] t [Focus
Magnifier]
2Press the Focus Magnifier button.
Focus Magnifier button
116
Adjusting the focus
3Press the Focus Magnifier button
again to enlarge the image and
select the portion you want to
enlarge with v/V/b/B on the
control button.
• Each time you press the Focus
Magnifier button, the zoom scaling
changes as follows: Full display t
Approx. ×5.9 t Approx. ×11.7
4Confirm and adjust the focus.
• Rotate the focusing ring to adjust the focus in manual focus mode.
• If you press the AF button, the enlarged portion returns to the center.
• The Focus Magnifier function is canceled if you press the shutter button
halfway down.
5Press the shutter button fully down to shoot the image.
• You can record images when an image is enlarged, however the recorded
image is for full display.
• The Focus Magnifier function will be released after shooting.
117
Shooting (Advanced operations)
Detecting faces
The camera detects faces, adjusts the focus, exposure, performs image
processing, and adjusts flash settings.
Fn button t (Face Detection) t Select the desired setting
The Face Detection frame
• Compose to overlay the Face Detection frame and the AF area.
Face Detection
Off Turns off Face Detection.
On (Regist. Faces) Enables Face Detection and prioritizes recognized faces that
have been registered in [Face Registration] (page 118).
On Enables Face Detection, but does not prioritize recognized
faces.
When the camera detects faces, gray Face
Detection frames appear. When the
camera judges that autofocus is possible,
the Face Detection frames turn white.
When you press the shutter button
halfway down, the Face Detection frames
turn green.
• If a face is not positioned inside the AF
area available when you press the
shutter button halfway down, the AF
area that is used for focusing turns
green.
• When the camera detects multiple
faces, the camera automatically selects
a priority face and the single Face
Detection frame turns white. A magenta
frame appears on a face that is
registered with [Face Registration].
Face Detection frames (white)
Shooting technique
Face Detection
frames (gray)
118
Detecting faces
Notes
• When the exposure mode is Sweep Panorama, 3D Sweep Panorama or Continuous
Advance Priority AE, the Face Detection function cannot be used.
• Up to 8 faces can be detected.
• The camera may not detect any faces, or may detect some other object, depending on
the shooting conditions.
• During [Smile Shutter] shooting, [Face Detection] is temporarily set to [On (Regist.
Faces)] even if it has been set to [Off].
The camera detects faces for which information has been registered in
advance.
To change the priority of faces previously registered
When you have registered multiple faces, the priority order is set. You can
change the priority order.
MENU button t 4 t [Face Registration] t [Order
Exchanging] t Select a face for which you want to change the
priority and the priority level
To delete a registered face
You can delete a registered face.
Face Registration
1MENU button t 4 t [Face Registration] t [New
Registration]
2Align the guide frame with the face to be registered, and press
the shutter button.
3Select [Enter] with v on the control button, then press the
center of the control button.
• Up to 8 faces of your subjects can be registered.
• Shoot the face from the front in a brightly lit place. The face may not be
registered correctly if it is obscured by a hat, a mask, sunglasses, etc.
119
Detecting faces
Shooting (Advanced operations)
MENU button t 4 t [Face Registration] t [Delete] t
Select the face you want to delete
• When you select [Delete All], you can delete all registered faces at one
time.
• Even if you select [Delete], the data on registered faces remains stored in
the camera. If you also want to delete this data from the camera, select
[Delete All].
When the camera detects a smile, the shutter is released automatically.
Smile Shutter
1Fn button t (Smile Shutter) t [On] t Select the
desired Smile Detection Sensitivity mode
You can set the sensitivity of the Smile Shutter function for detecting smiles
to one of the following 3 options: (Slight Smile), (Normal Smile),
and (Big Smile).
• When the Smile Shutter is activated, the Smile Detection Sensitivity
indicator appears on the screen.
2Wait detecting a smile.
The camera detects a smile and the focus
is confirmed. When the smile level
exceeds the b point on the indicator, the
camera records images automatically.
• When the camera detects the target
faces, orange Face Detection frames
appear around the faces. The Face
Detection frames turn green when these
subjects come into focus.
Smile Detection Sensitivity indicator
3To stop shooting, Fn button t (Smile Shutter) t [Off]
Face Detection frame
120
Detecting faces
• To focus on the smile, overlay the Face Detection frame and AF area.
• Do not cover the eyes with bangs, etc. Keep the eyes narrowed.
• Do not obscure the face with a hat, a mask, sunglasses, etc.
• Try to orient the face in front of the camera and keep it as level as
possible.
• Hold a clear smile with an open mouth. The smile is easier to detect when
the teeth are showing.
• If you press the shutter button while the Smile Shutter function is
activated, the camera shoots the image, and then returns to Smile Shutter.
Notes
• The Smile Shutter function cannot be used when the exposure mode is set to Sweep
Panorama, 3D Sweep Panorama, Continuous Advance Priority AE, Movie, or
[Hand-held Twilight] in Scene Selection, or the manual focus is selected.
• The drive mode is automatically set to [Single Shooting] or [Remote Cdr.].
• The AF illuminator does not work with the Smile Shutter function.
• If the camera does not detect a smile, change the settings for Smile Detection
Sensitivity.
• Smiles may not be detected correctly, depending on the shooting conditions.
• If you trigger Smile Shutter while tracking a face, the face becomes the target of the
smile detection feature (page 112).
Shooting techniques
121
Shooting (Advanced operations)
Adjusting the brightness of the image
When shooting into the sun or by a window, and the exposure may not be
appropriate for the subject, use the light meter where the subject is bright
enough and lock the exposure before shooting. To reduce the brightness of
the subject, point the camera forwards a spot that is brighter than the
subject and use the light meter to lock the exposure of the entire image. To
make the subject brighter, point the camera forwards a spot that is darker
than the subject and use the light meter to lock the exposure of the entire
image.
This section describes how to shoot a brighter image of the subject using
the (Spot).
AE Lock
1Fn button t (Metering Mode) t (Spot)
2Adjust the focus on the portion you want to lock the exposure.
3Press the AEL button to lock the
exposure.
(AE lock mark) appears.
• The exposure value based on the locked
exposure in the spot metering circle is
also indicated on the EV scale.
AEL button
4While pressing the AEL button, focus on the subject, and shoot
the subject.
• If you continue to shoot with the same exposure value, press and hold the
AEL button after the shooting. The setting is canceled when the button is
released.
122
Adjusting the brightness of the image
Fn button t (Metering Mode) t Select the desired mode
• Use [Multi segment] metering for general shooting.
• When there is a high contrast subject in the AF area, measure the light of
the subject you want to shoot with the optimal exposure using the spot
metering function and take advantage of an AE lock shooting (page 121).
Note
• When the exposure mode is set to AUTO, AUTO+, or Scene Selection, or when
smart teleconverter is used, [Metering Mode] is fixed to [Multi segment] and you
cannot select other modes.
When shooting with the flash, you can adjust the amount of flash light
alone, without changing the exposure compensation. You can only change
the exposure of a main subject which is within the flash range.
Fn button t (Flash Comp.) t Select the desired setting
Toward +: Makes the flash level higher.
Toward –: Makes the flash level lower.
Notes
• This item cannot be set when the exposure mode is set to AUTO, AUTO+, Sweep
Panorama, 3D Sweep Panorama, or Scene Selection.
• The higher flash effect may not be visible due to the limited amount of flash light, if
the subject is outside the maximum range of the flash. If the subject is very close, the
lower flash effect may not be visible.
Metering Mode
(Multi segment) This mode measures light on each area after dividing the total
area into multiple areas and determines the proper exposure
of the entire screen.
(Center weighted) While emphasizing the central area of the screen, this mode
measures the average brightness of the entire screen.
(Spot) This mode measures light only in the spot metering circle
located in the center area.
Shooting techniques
Flash Comp.
123
Adjusting the brightness of the image
Shooting (Advanced operations)
Exposure compensation and flash compensation
Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when
[AUTO] is selected) to perform the compensation.
Flash compensation only changes the amount of flash light.
MENU button t 2 t [Flash control] t Select the desired
setting
ADI: Advanced Distance Integration
TTL: Through the lens
• When [ADI flash] is selected, using a lens that is provided with a distance
encoder feature can perform more accurate flash compensation by using
more accurate distance information.
Notes
• When the distance between the subject and the external flash (sold separately)
cannot be determined (wireless flash shooting using an external flash (sold
separately), shooting with an off-camera flash using a cable, shooting with a macro
twin flash, etc.), the camera automatically selects Pre-flash TTL mode.
• Select [Pre-flash TTL] in the following cases, as the camera cannot perform flash
compensations with ADI flash.
– A wide panel is attached to the HVL-F36AM flash.
– A diffuser is used for flash shooting.
– A filter with an exposure factor, such as an ND filter, is used.
– A close-up lens is used.
• ADI flash is only available in combination with a lens that is provided with a
distance encoder. To determine if the lens is equipped with a distance encoder, refer
to the operating instructions supplied with the lens.
• This item cannot be set when the exposure mode is set to Sweep Panorama, 3D
Sweep Panorama, or [Night Scene]/[Hand-held Twilight] in Scene Selection.
Flash control
ADI flash This method controls the lighting of the flash, factoring in the
focus distance information and light metering data from the
pre-flash. This method enables an accurate flash
compensation with virtually no effect from the reflection off
the subject.
Pre-flash TTL This method controls the amount of flash light depending on
the data only from pre-flash light metering. This method is
susceptible to the reflection off the subject.
124
The flash
Press the Fn button, select the desired flash mode, press the
button, and shoot images (page 42).
• The lens hood may block the light of the flash. Remove the lens hood
when using the flash.
• When using the flash, shoot the subject at a distance of 1 m (3.3 feet) or
greater.
• When shooting indoors or shooting nightscapes, you can use slow sync to
shoot a brighter image of people and backgrounds.
• You can use rear sync to shoot a natural image of the trail of a moving
subject such as a moving bicycle or a walking person.
• When using the HVL-F58AM/HVL-F43AM Flash (sold separately), you
can shoot with the High-speed sync feature at any shutter speed. For
details, refer to the operating instructions supplied with the flash.
Notes
• Do not hold the camera by grabbing the flash emitter.
• Shooting conditions required to prevent shadows from appearing on an image vary,
depending on the lens.
• When the exposure mode is set to AUTO, AUTO+, or Scene Selection, the [Slow
Sync.], [Rear Sync.], and [Wireless] items cannot be selected.
• When the exposure mode is set to P, A, S, M, Continuous Advance Priority AE, the
[Flash Off] or [Autoflash] items cannot be selected. If you do not want to use the
flash, push the flash down.
• If you use the flash with a stereo microphone or similar device attached to the Auto-
lock Accessory shoe, the flash may not pop up to the correct position and recorded
images may have a shadow on their corners. Remove any device from the Auto-lock
Accessory shoe.
With a flash that has a wireless shooting function (sold separately), you can
shoot with the flash without a cord, even when the flash is not attached to
the camera. By changing the position of the flash, you can shoot an image
Shooting techniques
Wireless flash
125
The flash
Shooting (Advanced operations)
with a three dimensional feel by highlighting the contrast of light and
shadow on the subject.
For the actual steps of shooting, refer to the operating instructions of the
flash.
Notes
• Turn off the wireless flash mode after wireless flash shooting. If the built-in flash is
used while the wireless flash mode is still active, inaccurate flash exposures will
result.
• Change the channel of the external flash when another photographer is using a
wireless flash nearby and his/her flash light causes your external flash to fire. To
change the channel of the external flash, refer to the operating instructions supplied
with it.
Setup of the AEL button
When using a wireless flash, it is recommended that you set [Func. of AEL
button] to [AEL hold] in the Custom menu (page 161).
Wireless flash with lighting ratio control
You can use the wireless lighting ratio control in combination with the
multiple flashes. For details, refer to the operating instructions supplied
with the flash (HVL-F58AM, HVL-F43AM).
You can set the AF illuminator to focus on a subject under dark lighting.
1Attach the wireless flash to the Auto-lock Accessory shoe and
turn both the camera and the flash on.
2Fn button t (Flash Mode) t (Wireless)
3Remove the wireless flash from the Auto-lock Accessory shoe
and pop up the built-in flash.
• If you perform a test fire of the flash, press the AEL button.
The AF illuminator
126
The flash
MENU button t 2 t [AF Illuminator] t Select the desired
setting
• AF illuminator does not operate when [Autofocus Mode] is set to
(Continuous AF) or the subject is moving in (Automatic AF).
(The or indicator lights.)
• The AF illuminator may not operate with focal lengths of 300 mm or longer.
• When an external flash (sold separately) that is equipped with an AF
illuminator is attached, the AF illuminator of the external flash is used.
Push the built-in flash down.
• AF illuminator does not operate when [Smile Shutter] is set to [On].
127
Shooting (Advanced operations)
Setting ISO
Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.
Notes
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama, or Scene Selection, ISO is fixed to [AUTO] and you cannot select other
ISO numbers.
• When the exposure mode is set to P/A/S and ISO is set to [AUTO], ISO is
automatically set between ISO 100 and ISO 1600.
• The [AUTO] setting is not provided in exposure mode M. If you change the
exposure mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO
according to your shooting conditions.
The camera automatically shoots multiple images continuously, combines
the images, reduces the noise, and records 1 image. In multi frame noise
reduction, you can select larger ISO numbers than the maximum ISO
sensitivity.
The image recorded is 1 combined image.
Notes
• When [Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
• The flash, D-Range optimizer, and [Auto HDR] cannot be used.
1Press the ISO button to display
the ISO screen.
ISO button
2Select the desired setting with v/V on the control button.
• The larger the number, the higher the noise level.
• If you want to select [Multi Frame Noise Reduct.], display the setup screen
with B, and select the desired value with v/V.
Multi frame noise reduction
128
Compensating for the brightness and
contrast automatically (D-Range)
Fn button t (DRO/Auto HDR) t Select the desired setting
* Lv_ displayed with is the step currently selected.
Notes
• The setting is fixed to [Off] when the exposure mode is set to Sweep Panorama or
3D Sweep Panorama, or when [Multi Frame Noise Reduct.] or [Picture Effect] is
used.
• The setting is fixed to [Off] when [Sunset], [Night Scene], [Night Portrait], or
[Hand-held Twilight] is selected in Scene Selection. The setting is fixed to [Auto]
when other modes are selected in Scene Selection.
(Off) Does not use the DRO/Auto HDR functions.
(D-Range Opt.) By dividing the image into small areas, the camera analyses
the contrast of light and shadow between the subject and the
background, producing the image with the optimal brightness
and gradation.
(Auto HDR) Shoots 3 images with different exposures, and then overlays
correctly exposed image, the bright areas of an under exposed
image and the dark areas of an over exposed image to create
an image with rich gradation.
2 images are recorded: an image with the correct exposure
and an overlaid image.
D-RangeOptimizer
1Fn button t (DRO/Auto HDR) t (D-Range Opt.)
2Select an optimal level with b/B on the control button.
(Auto) Corrects the brightness automatically.
(Level)*Optimizes the gradations of a recorded image in each area of
the image. Select the optimal level between Lv1 (weak) and
Lv5 (strong).
129
Compensating for the brightness and contrast automatically (D-Range)
Shooting (Advanced operations)
• When shooting with the D-Range optimizer, the image may be noisy. Select the
proper level by checking the recorded image, especially when you enhance the
effect.
* _Ev displayed with is the step currently selected.
• Since the shutter is released 3 times for 1 shot, be careful about the
following:
– Use this function when the subject is motionless or does not blink.
– Do not recompose.
Notes
• You cannot use this function on RAW images.
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama, Continuous Advance Priority AE or Scene Selection, or when [Multi
Frame Noise Reduct.] is selected, you cannot select [Auto HDR].
• You cannot start the next shoot until the capture process is completed after you
shoot.
• You may not obtain a desired effect depending on the luminance difference of a
subject and the shooting conditions.
• When the flash is used, this function has little effect.
Auto HDR
1Fn button t (DRO/Auto HDR) t (Auto HDR)
2Select an optimal level with b/B on the control button.
(Auto HDR:
Exposure Diff. Auto)
Corrects the exposure difference automatically.
(Exposure
Difference Level)*
Sets the exposure difference, based on the contrast of the
subject. Select the optimal level between 1.0Ev (weak) and
6.0Ev (strong).
For example: When 2.0Ev is selected, 3 images are overlaid:
an image with –1.0Ev, an image with the correct exposure,
and an image with +1.0Ev.
Shooting technique
130
Compensating for the brightness and contrast automatically (D-Range)
• When the contrast of the scene is low or when camera shake or subject blur is
occurred, you may not obtain good HDR images. If the camera has detected a
problem, is indicated on the recorded image to inform you of this situation.
Shoot again, as necessary, paying attention to the contrast or blur.
131
Shooting (Advanced operations)
Setting the image processing
Select the desired effect filter to achieve more impressive and artistic
expression.
Picture Effect
(Picture Effect) on the control
button t Select the desired setting
• When a mode that has a fine adjustment
option is selected, select the desired
setting with b/B.
(Off) Does not use the Picture Effect function.
(Toy Camera) Creates the look of a Toy Camera photo with shaded corners
and pronounced colors. You can set the color tone with b/B.
(Pop Color) Creates a vivid look by emphasizing color tones.
(Posterization)
Creates a high contrast, abstract look by heavily emphasizing
primary colors, or in black and white. You can select primary
colors or black and white with b/B.
(Retro Photo) Creates the look of an aged photo with sepia color tones and
faded contrast.
(Soft High-key) Creates an image with the indicated atmosphere: bright,
transparent, ethereal, tender, soft.
(Partial Color)
Creates an image which retains 1 specific color, but converts
others to black and white. You can select a color with b/B.
(High Contrast
Mono.)
Creates a high-contrast image in black and white.
(Soft Focus) Creates an image filled with a soft lighting effect. You can set
the intensity of the effect with b/B.
(HDR Painting) Creates the look of a painting, enhancing the colors and
details. The camera releases the shutter 3 times. You can set
the effect intensity with b/B.
(Rich-tone
Mono.)
Creates an image in black and white with rich gradation and
reproduction of details. The camera releases the shutter 3
times.
132
Setting the image processing
Notes
• When Smart Teleconverter is used, the [Toy Camera] and [Miniature] effects are not
available.
• When [Partial Color] is selected, images may not retain the selected color,
depending on the subject or shooting condition.
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama or Continuous Advance Priority AE, or when [Quality] is set to [RAW] or
[RAW & JPEG], Picture Effect cannot be used.
• When [HDR Painting], [Miniature], [Rich-tone Mono.] or [Soft Focus] is selected,
you cannot confirm the effect before shooting. You cannot also set the drive mode.
• When the contrast of the scene is low or when significant camera shake or subject
blur has occurred with [HDR Painting] or [Rich-tone Mono.] selected, you may not
obtain good HDR images. If the camera detects such situation, is indicated on the
recorded image to inform you of this situation. Shoot again, as necessary,
recomposing or paying attention to the blur.
You can select the desired style to be used to perform image processing,
and adjust the contrast, saturation, and sharpness for each Creative Style.
You can also adjust the exposure (shutter speed and aperture), unlike Scene
Selection where the camera adjusts the exposure.
(Miniature) Creates an image which enhances the subject vividly, with
the background defocused considerably. This effect may
often be found in pictures of miniature models. You can
select the area to be in focus with b/B. The focus on other
areas is greatly reduced.
Creative Style
1Fn button t (Creative Style) t Select the desired setting
2When you want to adjust (Contrast), (Saturation), or
(Sharpness), select the desired item with b/B on the control
button, then adjust the value with v/V.
(Standard) For shooting various scenes with rich gradation and beautiful
colors.
133
Setting the image processing
Shooting (Advanced operations)
(Contrast), (Saturation), and (Sharpness) can be adjusted for each
Creative Style item.
Notes
• When the exposure mode is set to AUTO, AUTO+ or Scene Selection, or the Picture
Effect mode is selected, [Creative Style] is fixed to [Standard] and you cannot select
other settings.
• When [Black & White] is selected, you cannot adjust the saturation.
(Vivid) The saturation and contrast are heightened for shooting
striking images of colorful scenes and subjects such as
flowers, spring greenery, blue sky, or ocean views.
(Portrait) For shooting the skin color in a soft tone, ideally suited to
shooting portraits.
(Landscape) The saturation, contrast, and sharpness are heightened for
shooting vivid and crisp scenery. Distant landscapes also
stand out more.
(Sunset) For shooting the beautiful red of the setting sun.
(Black & White) For shooting images in black and white monotone.
(Contrast) The higher the value selected, the more the difference of light
and shadow is accentuated, thus making an impact on an
image.
(Saturation) The higher the value selected, the more vivid the color. When
a lower value is selected, the color of the image is restrained
and subdued.
(Sharpness) Adjusts the sharpness. The higher the value selected, the
more the contours are accentuated, and the lower the value
selected, the more the contours are softened.
134
Adjusting the color tones (White
balance)
The color tone of the subject changes depending on the characteristics of
the light source. The table below shows how the color tone changes based
on various light sources, compared with a subject that appears white under
the sunlight.
Use this feature when the color tone of the image did not come out as you
expected, or when you want to change the color tone on purpose for
photographic expression.
Notes
• When the exposure mode is set to AUTO, AUTO+, or Scene Selection, [White
Balance] is fixed to [Auto WB] and you cannot select other modes.
• If the only light source available is a mercury lamp or a sodium lamp, the camera
will not be able to acquire the accurate white balance because of the characteristics
of the light source. Use the flash in such cases.
Weather/
lighting
Daylight Cloudy Fluorescent Incandescent
Characteristics
of light
White Bluish Green-tinged Reddish
WB on the control button t Select
the desired setting
• When you select a setting other than
[C.Temp./Filter], press B so that the
fine adjustment screen appears and you
can adjust the color tone with v/V/b/
B, as necessary.
135
Adjusting the color tones (White balance)
Shooting (Advanced operations)
• Use the white balance bracket function if you cannot get the desired color
in the selected option (page 142).
• When you select [C.Temp./Filter], you can adjust the value to the desired
value (page 136).
• When you select [Custom], you can register your setting (page 136).
AWB (Auto WB) The camera automatically detects a light source and adjusts
the color tones.
(Daylight) If you select an option to suit a specific light source, the color
tones are adjusted for the light source (preset white balance).
(Shade)
(Cloudy)
(Incandescent)
(Fluor.: Warm
White)
(Fluor.: Cool
White)
(Fluor.: Day
White)
(Fluor.:
Daylight)
(Flash)
Shooting techniques
The fine adjustment screen for color
You can perform a fine adjustment by
combining the color temperature with the
color filter.
136
Adjusting the color tones (White balance)
Note
• Since color meters are designed for film cameras, the values differ under fluorescent/
sodium lamp/mercury lamps. We recommend that you use the custom white balance
or perform a test shooting.
In a scene where the ambient light consists of multiple types of light source,
use of custom white balance is recommended in order to accurately
reproduce the whiteness.
Color Temp. Fine-tunes color in the B (blue) direction with b and the A
(amber) direction with B.
Color Filter Fine-tunes color in the G (green) direction with v and the M
(magenta) direction with V.
Color Temp./Color Filter
1WB on the control button t
(C.Temp./Filter) t B
2Set the color temperature with v/V on the control button.
3Press B to display the fine adjustment screen and compensate
the color to your preference with v/V/b/B.
Custom white balance
1WB on the control button t [
SET] t press the center of the
control button
137
Adjusting the color tones (White balance)
Shooting (Advanced operations)
Note
• The message “Custom WB error” indicates that the value is beyond the expected
range. (When the flash is used on a subject in close proximity or a subject with a
bright color is in the frame.) If you register this value, the indicator turns yellow
on the recording information display. You can shoot at this point, but it is
recommended that you set the white balance again to get a more accurate white
balance value.
To call the custom white balance setting
WB on the control button t (Custom)
• Press B to display the fine adjustment screen and compensate the color to
your preference.
Note
• If the flash is used when the shutter button is pressed, a custom white balance is
registered with the flash light taken into account. Take pictures with the flash in later
shootings.
2Hold the camera so that the white area fully covers the AF area
located in the center, and then press the shutter button down.
The shutter clicks and the calibrated values (Color Temperature and Color
filter) are displayed.
3Press the center of the control button.
The monitor returns to the recording information display with the memorized
custom white balance setting retained.
• The custom white balance setting registered in this operation is effective
until a new setting is registered.
138
Zooming in in one step
You can zoom in to the center of an image using the smart teleconverter
(Digital zoom) and record the image.
The image size is automatically set to the following regardless of the
selected image size.
Notes
• The smart teleconverter is unavailable
– When the exposure mode is set to Sweep Panorama or 3D Sweep Panorama.
– When [Smart Telecon. Button] is set to [Focus Magnifier].
– [Quality] is set to [RAW] or [RAW & JPEG].
– The Smile Shutter function is set to [On].
• When the smart teleconverter is available (when in autofocus mode), [AF area] is set
to [Spot].
• When the smart teleconverter is available, [Metering mode] is set to [Multi
segment].
• You cannot use the smart teleconverter function with movies.
Press the button.
• Each time you press the button, the
zoom scaling changes as follows:
Approx. ×1.4 t Approx. ×2 t Off
button
Zoom scaling Image size
Approx. ×1.4 M
Approx. ×2 S
139
Shooting (Advanced operations)
Selecting the drive mode
This mode is for normal shooting.
Note
• When the exposure mode is set to [Sports Action] in Scene Selection, you cannot
shoot single shot.
The camera records the images continuously.
• To shoot continuously faster, set the exposure mode to Continuous
Advance Priority AE (pages 41, 93).
Notes
• When is selected, the image recorded between the frames is displayed.
Shooting single shot
on the control button t
(Single Shooting)
Cont. Shooting
1 on the control button t
(Cont. Shooting) t Select
the desired speed
2Adjust the focus and shoot the subject.
• When you press and hold the shutter button, the recording continues.
Shooting technique
140
Selecting the drive mode
• You cannot shoot continuously when using Scene Selection modes other than
[Sports Action].
The 10-second self-timer is convenient when the photographer appears in a
photo and the 2-second self-timer is convenient to reduce the camera shake.
To cancel the self-timer
Press on the control button.
Bracket shooting allows you to shoot several images, each with different
degrees of exposure. Specify the value of deviation (steps) from the base
exposure, and the camera shoots 3 images while automatically shifting the
exposure.
Self-timer
1 on the control button t
(Self-timer) t Select the
desired setting
• The number after is the number of
seconds that is currently selected.
2Adjust the focus and shoot the subject.
• When the self-timer is activated, audio signals and the self-timer lamp
indicate the condition. The self-timer lamp flashes quickly and the audio
signal sounds quickly right before the shooting.
Bracket: Cont./Single Bracket
Base exposure – direction + direction
141
Selecting the drive mode
Shooting (Advanced operations)
Notes
• When the mode dial is set to M, the exposure is shifted by adjusting the shutter
speed.
• When you adjust the exposure, the exposure is shifted based on the compensated
value.
• The bracket cannot be used when the exposure mode is set to AUTO, AUTO+,
Continuous Advance Priority AE, Sweep Panorama, 3D Sweep Panorama, or Scene
Selection.
• When the flash is fired, flash bracket shooting is used to shift the amount of flash
light. To shoot, press the shutter button shot by shot even when [Bracket: Cont.] is
selected.
The EV scale in bracket shooting
1 on the control button t
(Bracket: Cont.) or
(Single Bracket) t Select
the desired bracket step
2Adjust the focus and shoot the subject.
The base exposure is set at the first shot in the bracket.
• Press and hold the shutter button until recording stops when [Bracket:
Cont.] is selected.
• Press the shutter button shot by shot when [Single Bracket] is selected.
Ambient light* bracket
0.3 steps, 3 shots
Exposure compensation 0
Flash bracket
0.7 steps, 3 shots
Flash compensation –1.0
Viewfinder
LCD monitor (When
[DISP Button(Monitor)]
is set to [For
viewfinder]) Shown in the top row. Shown in the bottom row.
142
Selecting the drive mode
* Ambient light: Any light other than the flash light that shines on the scene
for an extended period of time, such as natural light, a light bulb, or a
fluorescent light.
• In bracket shooting, the same number of indices as the number of
recordable images is displayed on the EV scale.
• When the bracket shooting starts, the indices that indicate already
recorded images start to disappear one by one.
Based on the selected white balance, and the color temperature/color filter,
3 images are recorded with the white balance shifted.
*MK
–1: a unit to indicate the color conversion quality in color temperature filters (The
same value as the conventional unit, “Mired.”).
You can shoot using the SHUTTER and 2SEC (the shutter is released after
2 seconds) buttons on the RMT-DSLR1 Wireless Remote Commander
(sold separately). Also, refer to the operating instructions supplied with the
Wireless Remote Commander.
WB bracket
1 on the control button t
(WB bracket) t Select
the desired setting
• When Lo is selected, it is shifted by 10
MK–1*, and when Hi is selected, it is
shifted by 20 MK–1.
2Adjust the focus and shoot the subject.
Remote Cdr.
143
Selecting the drive mode
Shooting (Advanced operations)
Note
• The RMT-DSLR1 Wireless Remote Commander (sold separately) cannot be used
for movie recording.
1 on the control button t
(Remote Cdr.)
2Focus on the subject, point the transmitter of the Wireless
Remote Commander to the remote sensor, and shoot the
image.
144
Playback (Advanced operations)
Playback
The screen displayed for playback
mode
Each time you press DISP on the control button, the screen changes as
follows.
A
Switching the screen during playback
List of icons on the histogram display
With recording data Histogram Without recording
data
Display Indication
Memory card (22, 206)
View mode (146)
100-0003 Folder - file number
(177)
Aspect ratio of still
images (157)
3D Sweep Panorama (40,
91)
24M 12M
6.0M 20M
10M 5.1M
Image size of still images
(48)
Image quality of still
images (157)
-Protect (149)
DPOF DPOF set (182)
Display Indication
145
The screen displayed for playback mode
Playback (Advanced operations)
B
* When the image has a high-key or
low-key portion, that portion is flashed
on the histogram display (Luminance
limit warning).
Remaining battery
warning (23)
Remaining battery (23)
Database file full (197)/
Database file error (197)
Overheating warning (11)
Display Indication
Histogram* (82)
P A S
M
Exposure mode (37)
1/125 Shutter speed (97)
F3.5 Aperture (95)
ISO200 ISO sensitivity (127)
–0.3 Exposure compensation
(44)
–0.3 Flash compensation (122)
Metering mode (122)
35mm Focal length
Creative Style (132)
Picture Effect (131)
AWB
5500K A1
M1
White balance (Auto,
Preset, Color
temperature, Color filter,
Custom) (134)
Display Indication
D-Range Optimizer
(128)/Auto HDR/Auto
HDR image warning
(129)
2011-1-1
10:37AM
Date of recording
3/7 File number/Number of
images in the view mode
Display Indication
146
Using the playback functions
To return to the normal playback screen
Press the button again.
Notes
• You cannot rotate movies.
• When you copy rotated images to a computer, “PMB” contained on the CD-ROM
(supplied) can display the rotated images correctly. However, the images may not be
rotated depending on the software.
Selects the unit for images to be played back.
MENU button t 1 t [View Mode] t Select the desired
setting
Rotating an image
1Display the image you want to
rotate, then press the button.
button
2Press the center of the control button.
The image is rotated counter-clockwise. When you want to do another
rotation, repeat step 2.
• Once you rotate the image, the image is played back in the rotated position,
even after you turn off the power.
View Mode
Folder View(Still) Displays still images by folder.
Folder View(MP4) Displays movies (MP4) by folder.
AVCHD View Displays only AVCHD View movies.
147
Using the playback functions
Playback (Advanced operations)
MENU button t 1 t [Slide Show]t [Enter]
Plays back recorded images in order (Slide Show). The slide show
automatically stops after all the images have been played back.
• You can view the previous/next image with b/B on the control button.
• You cannot pause the slide show.
To end in the middle of the slide show
Press the center of the control button.
To choose the interval between the images in slide show
MENU button t 1 t [Slide Show] t [Interval] t Select
the desired number of seconds
To play back repeatedly
MENU button t 1 t [Slide Show] t [Repeat] t [On]
To play back 3D-images
If you connect the camera to a 3D-compatible TV using an HDMI cable
(sold separately), you can play back 3D-images recorded with the 3D
Sweep Panorama mode. For details on 3D-shooting, see page 205. Also
refer to the operating instructions supplied with the TV.
MENU button t 1 t [Slide Show] t [Image Type] t
[Display 3D Only]
You can set the playback orientation of images recorded in portrait
orientation.
MENU button t 2 t [Playback Display] t Select the
desired setting
Slide Show
Playback Display
148
Using the playback functions
Select a panoramic image, then press the center of the control
button.
• Pressing it again pauses the playback. You can scroll a panoramic image
by pressing v/V/b/B during pause.
Note
• Scrolling playback is not available for images that were recorded with [3D Pan.:
Image Size] set to [16:9].
Scrolling panoramic images
149
Playback (Advanced operations)
Protecting images (Protect)
You can protect images against accidental erasure.
To cancel the protection of all the images or movies
You can cancel the protection of all the images or movies by the same view
mode currently displayed.
MENU button t 1 t [Protect] t [Cancel All Images],
[Cancel All Movies(MP4)] or [Cancel All AVCHD view files]
1MENU button t 1 t [Protect] t [Multiple Img.]
2Select the image you want to
protect with b/B on the control
button, then press the center of
the control button.
A mark is put in the check box.
• To cancel a selection, press the center
again.
3To protect other images, repeat step 2.
• You can select all the images in the folder by selecting the bar on the left of
the image index screen.
4Press the MENU button.
5Select [OK] with v, then press the center of the control button.
150
Deleting images (Delete)
You can delete only unnecessary images, or all the images.
Once you have deleted an image, you cannot restore it. Check whether to
delete the image or not beforehand.
Note
• Protected images cannot be deleted.
To display the desired folder
Select the bar on the left of the image index screen with the control button,
then select the desired folder with v/V.
Delete (Multiple Img.)
1MENU button t 1 t [Delete] t [Multiple Img.]
2Select the images you want to
delete with the control button,
then press the center of the
control button.
A mark is put in the check box.
• To cancel a selection, press the center
again. Total number
3To delete other images, repeat step 2.
• You can select all the images in the folder by selecting the bar on the left of
the image index screen.
4Press the MENU button.
5Select [OK] with v, then press the center of the control button.
151
Deleting images (Delete)
Playback (Advanced operations)
You can delete all still images or movies by the same view mode currently
displayed.
Deleting all the images or movies in the same view mode
1MENU button t 1 t [Delete] t [All in Folder] or [All
AVCHD view files]
2Select [Delete] with v on the control button, then press the
center of the control button.
152
About playback on TV
Connect the camera to a TV using an HDMI cable (sold separately)
and play back images (page 52).
Notes
• Use an HDMI cable with the HDMI logo.
• Use an HDMI mini connector on one end (for the camera), and a connector suitable
for connection to your TV on the other end.
• When images cannot be displayed properly, set [HDMI Resolution] in the Setup
menu to [1080p] or [1080i], according to your TV.
• Some devices may not work properly.
• Do not connect the output connector of the device with the HDMI terminal on the
camera. This may cause a malfunction.
On “PhotoTV HD”
This camera is compatible with the “PhotoTV HD” standard.
By connecting Sony’s PhotoTV HD-compatible devices using an HDMI
cable, a whole new world of photos can be enjoyed in breathtaking Full HD
quality.
“PhotoTV HD” allows for a highly-detailed, photo-like expression of
subtle textures and colors.
If you connect the camera to a 3D-compatible TV using an HDMI cable
(sold separately), you can play back 3D-images recorded with the 3D
Sweep Panorama mode automatically. For details on 3D-shooting, see page
205. Also refer to the operating instructions supplied with the TV.
MENU button t 1 t [3D Viewing]
By connecting the camera to a TV that supports “BRAVIA” Sync using an
HDMI cable, you can operate the camera with the TV Remote Control.
3D Viewing
Using “BRAVIA” Sync
153
About playback on TV
Playback (Advanced operations)
The items for Sync Menu
Notes
• The operations available are restricted when the camera is connected to a TV using
an HDMI cable.
• Only TVs that support “BRAVIA” Sync can provide these operations. The SYNC
Menu operations differ depending on the TV connected. For details, refer to the
operating instructions supplied with the TV.
• If the camera performs unnecessary operations in response to the TV Remote
Control when the camera is connected to another manufacturer’s TV using an HDMI
connection, set [CTRL FOR HDMI] in the Setup menu to [Off].
1Connect a TV that supports “BRAVIA” Sync to the camera
(page 52).
The input is automatically switched and the image shot with the camera
appears on the TV screen.
2Press the SYNC MENU button on the TV Remote Control.
3Operate with the buttons on the TV Remote Control.
Slide Show Plays back images automatically (page 147).
Single-image
playback
Returns to the single-image screen.
Image Index Switches to the image index screen.
3D Viewing Plays back 3D-images when connected to a 3D-compatible
TV.
View Mode Switches the view mode.
Delete Deletes images.
154
Setup of the camera (Advanced operations)
Setup of the camera
GPS setting (SLT-A65V only)
If the camera has acquired location information using the built-in GPS
feature, this information is recorded in the images or movies at that
location.
Using the supplied software “PMB,” you can import images recorded with
location information to a computer and enjoy viewing them with a map
which shows their shooting location. See “PMB Help” for details.
MENU button t 1 t [GPS Settings] t [GPS On/Off] t [On]
The indicator changes according to the strength of GPS signal reception.
To receive a GPS signal
• Proper triangulation is not possible indoors or near tall buildings.
Use your camera in an open area outside, and turn on your camera again.
• It may take several tens of seconds to several minutes to acquire the
location information. You can shorten the positioning time by using GPS
assist data.
Notes
• Right after you turn the camera on, it may take several tens of seconds to several
minutes to acquire the location information. If you shoot images with the location
information not acquired, the information is not recorded. To record the correct
information, wait until the camera can receive radio signals from GPS satellites.
• During take off and landing of an airplane, turn off the camera, as you will be
instructed to do by the on-board announcement.
• Use GPS in accordance with the regulations of the place or situation.
• For detailed notes on the GPS feature, see page 203.
GPS indicators GPS reception status
No indicator [GPS On/Off] is set to [Off].
Your camera cannot record the location information. Use your
camera in an open area.
Calculating the location information. Wait until the location
information is recordable.
The current location information is recordable.
There is a problem with the GPS feature. Turn the camera off and
on.
155
GPS setting (SLT-A65V only)
Setup of the camera (Advanced operations)
The time for the GPS acquiring location information can be shortened by
taking in GPS assist data.
If the camera connects to the computer with the supplied “PMB” software
installed, the GPS assist data can be updated automatically.
To check the state of GPS assist data
MENU button t 1 t [GPS Settings] t [Use GPS Assist
Data]
Notes
• The computer is required to connect to the Internet when updating data.
• If the term of validity of assist data has run out, the time until you can record
location information cannot be shortened. It is recommended that you update the
assist data regularly. The expiration date of the assist data is about 30 days.
• If [Date/Time Setup] is not set, or set time is shifted greatly, the time for the GPS
acquiring location information cannot be shortened.
• The assist data service may be closed for various reasons.
To update the GPS assist data by inserting a memory card into the
computer
Start up [GPS Support Tool] from (PMB Launcher), select the memory
card drive from your computer, and then update the GPS assist data. Insert
the memory card that has been updated into the camera.
Your camera maintains correct clock time by using GPS to acquire time
information during starting up. The time is corrected when the power is
turned off.
MENU button t 1 t [GPS Settings] t [GPS Auto Time Cor.]
t [On]
Notes
• [GPS Auto Time Cor.] is invalid if [GPS On/Off] is set to [Off].
• You must set [Date/Time Setup] on the camera before using it.
GPS Assist Data
GPS Auto Time Cor.
156
GPS setting (SLT-A65V only)
• There may be discrepancies of a few seconds.
• Depending on the area, it may not function correctly.
157
Setup of the camera (Advanced operations)
Setting the aspect ratio and image
quality
MENU button t 1 t [Aspect Ratio] t Select the desired
ratio
Note
• This item cannot be set when the exposure mode is set to Sweep Panorama or 3D
Sweep Panorama.
MENU button t 1 t [Quality] t Select the desired setting
Aspect Ratio
3:2 A normal ratio.
16:9 An HDTV ratio.
Quality
(RAW) File format: RAW (Records using the RAW compression
format.)
This format does not perform any digital processing on the
images. Select this format to process images on a computer
for professional purposes.
• The image size is fixed to the maximum size. The image
size is not displayed on the screen.
(RAW &
JPEG)
File format: RAW (Records using the RAW compression
format.) + JPEG
A RAW image and a JPEG image are created at the same
time. This is suitable when you need 2 image files, a JPEG
for viewing, and a RAW for editing.
• The image quality is fixed to [Fine] and the image size is
fixed to [L].
(Fine) File format: JPEG
The image is compressed in the JPEG format when recorded.
Since the compression rate of (Standard) is higher than
that of (Fine), the file size of is smaller than that
of . This will allow more files to be recorded on one
memory card, but the image quality will be lower.
(Standard)
158
Setting the aspect ratio and image quality
Note
• This item cannot be set when the exposure mode is set to Sweep Panorama or 3D
Sweep Panorama.
About RAW images
You need the “Image Data Converter” software included on the CD-ROM (supplied)
in order to open a RAW image recorded on this camera. With this software, a RAW
image can be opened and converted to a common format, such as JPEG or TIFF, and
its white balance, color saturation, contrast, etc., can be readjusted.
• The RAW format image cannot be printed using a DPOF (print) designated printer.
• You cannot set [Auto HDR] or [Picture Effect] on RAW format images.
159
Setup of the camera (Advanced operations)
Setting the other functions of the
camera
When you set the shutter speed to 1 second or longer (Long exposure
shooting), noise reduction is turned on for the same duration that the shutter
is open.
This is to reduce the grainy noise typical in a long exposure. When noise
reduction is in progress, a message appears and you cannot take another
picture. Select [On] to prioritize the image quality. Select [Off] to prioritize
the timing of shooting.
MENU button t 2 t [Long Exposure NR] t Select the
desired setting
Notes
• When the exposure mode is set to Sweep Panorama, 3D Sweep Panorama,
Continuous Advance Priority AE, or continuous shooting, continuous bracketing,
[Sports Action] or [Hand-held Twilight] in Scene Selection, or ISO is set to [Multi
Frame Noise Reduct.], noise reduction is not performed even when it is set to [On].
• When the exposure mode is set to AUTO, AUTO+ or Scene Selection, you cannot
turn off noise reduction.
The camera reduces the noise that becomes more noticeable when the
camera sensitivity is high. A message may be indicated during the
processing and you cannot record images during this processing.
Normally, set it to [Normal]. Select [High] to reduce the noise. Select
[Low] to prioritize the timing of shooting.
MENU button t 2 t [High ISO NR] t Select the desired
setting
Notes
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama, or Scene Selection, this item cannot be set.
• Noise reduction is not performed on RAW images.
Long Exposure NR
High ISO NR
160
Setting the other functions of the camera
The way colors are represented with combinations of numbers or the range
of color reproduction is called “color space.” You can change the color
space, depending on your purpose.
MENU button t 2 t [Color Space] t Select the desired
setting
Notes
• Adobe RGB is for applications or printers that support color management and
DCF2.0 option color space. Using some applications or printers that do not support
them may result in or print images that do not faithfully reproduce the color.
• When displaying images that were recorded with Adobe RGB on the camera or non-
Adobe RGB-compliant devices, the images are displayed with low saturation.
You can release the shutter when no lens is attached. Select this when you
attach the camera on an astronomical telescope, etc.
MENU button t 1 t [Release w/o Lens] t [Enable]
Note
• Correct metering cannot be achieved when you use lenses that do not provide a lens
contact, such as the lens of an astronomical telescope. In such cases, adjust the
exposure manually by checking it on the recorded image.
Color Space
sRGB This is the standard color space of the digital camera. Use
sRGB in normal shooting, such as when you intend to print
out the images without any modification.
AdobeRGB This has a wide range of color reproduction. When a large
part of the subject is vivid green or red, Adobe RGB is
effective.
• The file name of the image starts with “_DSC.”
Release w/o Lens
161
Setting the other functions of the camera
Setup of the camera (Advanced operations)
The grid line is an auxiliary line for shooting composition. You can set the
grid line to on/off or select the type of grid line. The available range of
movie recording is also displayed.
MENU button t 2 t [Grid Line] t Select the desired setting
You can check the recorded image on the screen right after the shooting.
You can change the displayed time.
MENU button t 2 t [Auto Review] t Select the desired
setting
Note
• In auto review, the image will not be displayed in the vertical position even if
[Playback Display] is set to [Auto Rotate] (page 147).
The function of the AEL button can be selected from the following 2
functions (page 122):
– Holding the locked exposure value by pressing the AEL button while
the button is held down ([AEL hold]).
– Holding the locked exposure value by pressing the AEL button until the
button is pressed again ([AEL toggle]).
When [ AEL hold] or [ AEL toggle] is selected, the exposure is locked
in spot metering mode.
MENU button t 3 t [Func. of AEL button] t Select the
desired setting
Notes
• While the exposure value is locked, appears on the LCD monitor and in the
viewfinder. Be careful not to reset the setting.
• When [AEL toggle] is selected, be sure to press the AEL button again to release the
lock.
Grid Line
Auto Review
Func. of AEL button
162
Setting the other functions of the camera
To assign another function to the AEL button
You can assign one of the following functions to the AEL button in
addition to the AEL function:
Exposure Comp./Drive Mode/Flash Mode/Autofocus Mode/AF area/Face
Detection/Smile Shutter/ISO/Metering Mode/Flash Comp./White Balance/
DRO/Auto HDR/Creative Style/Picture Effect/Image Size/Quality/Object
Tracking/AF lock/Aperture Preview/Shot. Result Preview/Smart Telecon./
Focus Magnifier
You can also assign another function to the ISO button, other than the ISO
function. The functions available are the same as those of [Func. of AEL
button] (page 161).
MENU button t 3 t [ISO Button] t Select the desired
setting
You can check the approximate blurring of the background of the subject
before shooting.
MENU button t 3 t [Preview Button] t Select the desired
setting
The electronic front curtain shutter function shortens the time lag between
shutter releases.
MENU button t 4 t [Front Curtain Shutter] t Select the
desired setting
ISO Button
Preview Button
Shot. Result Preview The aperture is narrowed to match the selected aperture value
and you can check the blurring. The shutter speed value is
also reflected.
Aperture Preview The aperture is narrowed to match the selected aperture value
and you can check the blurring.
Electronic Front Curtain Shutter
163
Setting the other functions of the camera
Setup of the camera (Advanced operations)
Notes
• When you shoot at high shutter speeds with a large diameter lens attached, the
ghosting of a blurred area may occur, depending on the subject or shooting
conditions. In such cases, set this item to [Off].
• When a Konica Minolta lens is used, set this item to [Off]. If you set this item to
[On], the correct exposure will not be set or the image brightness will be uneven.
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 15).
You can set the brightness of the LCD monitor manually.
MENU button t 1 t [LCD Brightness] t Select the desired
setting
Notes
• When it is set to [Auto], do not cover the light sensor with your hand and so on.
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
The brightness of the viewfinder is automatically adjusted to the lighting
conditions of the subject.
You can set the brightness of the viewfinder manually.
MENU button t 1 t [Viewfinder Bright.] t [Manual] t
Select the desired setting
Note
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the viewfinder is always set to the brightest setting even if you select
[Auto].
LCD Brightness
Viewfinder Bright.
164
Setting the other functions of the camera
You can set different time intervals for the camera to switch to power save
mode (Power Save). Pressing the shutter button halfway down returns the
camera to the shooting mode.
MENU button t 1 t [Power Save] t Select the desired
time
Note
• The camera does not turn to power save mode when the camera is connected to a TV
or the drive mode is set to [Remote Cdr.].
You can disable the automatic switching of the LCD monitor and the
viewfinder and enable only the FINDER/LCD button to switch them.
MENU button t 1 t [FINDER/LCD Setting] t [Manual]
Power Save
FINDER/LCD Setting
165
Setup of the camera (Advanced operations)
Lens compensation
You can automatically compensate the following characteristics: light fall-
off at the edges, chromatic aberration, and distortion (only for automatic
compensation compliant lenses). For further information on automatic
compensation compliant lenses, visit the Sony web site in your area, or
consult your Sony dealer or local authorized Sony service facility.
Compensates for the shaded corners of the screen caused by certain lens
characteristics. This item is set to [Auto] in the default settings.
MENU button t 4 t [Lens Comp.: Shading] t Select the
desired setting
Reduces the color deviation at the corners of the screen caused by certain
lens characteristics. This item is set to [Auto] in the default settings.
MENU button t 4 t [Lens Comp.: Chro. Aber.] t Select the
desired setting
Compensates for the distortion of the screen caused by certain lens
characteristics. This item is set to [Off] in the default settings.
MENU button t 4 t [Lens Comp.: Distortion] t Select the
desired setting
Lens Comp.: Peripheral Shading
Lens Comp.: Chromatic Aberration
Lens Comp.: Distortion
166
Setting the method for recording on a
memory card
Note that formatting irrevocably erases all data on a memory card,
including protected images.
MENU button t 1 t [Format] t [Enter]
Notes
• During the format, the access lamp lights up. Do not eject the memory card while the
lamp is lit.
• Format the memory card using the camera. If you format it on a computer, the
memory card may not be usable with the camera, depending on the format type used.
• Formatting may take several minutes depending on the memory card.
• When the remaining battery time is 1 percent or less, you cannot format memory
cards.
MENU button t 1 t [File Number] t Select the desired
setting
The recorded still images are stored in automatically-created folders in the
DCIM folder of the memory card.
Format
File Number
Series The camera does not reset numbers and assigns numbers to
files in sequence until the number reaches “9999.”
Reset The camera resets numbers in the following cases and assigns
numbers to files from “0001.” When the recording folder
contains a file, a number one higher than the largest number
is assigned.
– When the folder format is changed.
– When all the images in the folder are deleted.
– When the memory card is replaced.
– When the memory card is formatted.
Folder Name
167
Setting the method for recording on a memory card
Setup of the camera (Advanced operations)
MENU button t 1 t [Folder Name] t Select the desired
setting
Note
• The MP4 movie folder form is fixed as “folder number + ANV01.”
When a standard form folder is selected and there are 2 or more folders,
you can select the recording folder to be used to record images.
MENU button t 1 t [Select REC Folder] t Select the
desired folder
Note
• You cannot select the folder when you select the setting [Date Form].
You can create a folder in a memory card for recording images.
A new folder is created with a number incremented one higher than the
largest number currently used, and the folder becomes the current recording
folder. A folder for still images and a folder for MP4 movies are created at
the same time.
MENU button t 1 t [New Folder]
Notes
• When you insert a memory card that was used with other equipment into the camera
and shoot images, a new folder may be automatically created.
• Up to 4 000 images can be stored in a folder. When the folder capacity is exceeded, a
new folder is created automatically.
Standard Form The folder name format is as follows: folder number +
MSDCF.
Example: 100MSDCF
Date Form The folder name format is as follows: folder number + Y (the
last digit)/MM/DD.
Example: 10010405 (Folder name: 100, date: 2011/04/05)
Select REC Folder
New Folder
168
Setting the method for recording on a memory card
When inconsistencies are found in the image database file, caused by
processing images on computers, etc., images on the memory card will not
be played back in this form. If this happens, the camera repairs the file.
MENU button t 1 t [Recover Image DB] t [Enter]
Note
• Use a sufficiently charged battery. Low battery power during repairing can cause
damage to data.
Sets whether or not you use the upload function when using an Eye-Fi card
(commercially available). This item appears when an Eye-Fi card is
inserted in the camera.
MENU button t 2 t [Upload Settings] t Select the desired
setting
The status indicators in communication
Notes
• Before using an Eye-Fi card, set up the wireless LAN access point and forwarding
destination. For details, refer to the operating manual supplied with the Eye-Fi card.
• Eye-Fi cards are sold in the U.S.A, Canada, Japan, and some countries in the EU (as
of March in 2011).
• For more information, please contact the manufacturer or vendor directly.
• Eye-Fi cards can be used only in the countries/regions where they were purchased.
Use Eye-Fi cards in accordance with the law of the countries/regions where you
purchased the card.
• Eye-Fi cards include a wireless LAN function. Do not insert any Eye-Fi cards in the
camera when it is prohibited to do so, such as on an airplane. If there is an Eye-Fi
Recover Image DB
Upload Settings
Standby. No images are to be sent.
Upload standby.
Connecting.
Uploading.
Error.
169
Setting the method for recording on a memory card
Setup of the camera (Advanced operations)
card inserted in the camera, set [Upload Settings] to [Off]. is displayed on the
screen when [Upload Settings] is set to [Off].
• When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye-
Fi manager recorded on the card to your computer before formatting the card.
• Use an Eye-Fi card after updating the firmware to the latest version. For details, refer
to the manual that comes with the Eye-Fi card.
• The power save function of the camera does not work while it is uploading images.
• If (error) is displayed, remove the memory card and reinsert it, or turn off then
turn on the power again. If appears again, the Eye-Fi card may be damaged.
• Wi-Fi network communication may be influenced by other communication devices.
If the communication status is poor, move closer to the access point of the Wi-Fi
network.
• For details on the file types that can be uploaded, refer to the operating instructions
supplied with the Eye-Fi card.
• If you upload an image that was recorded with [GPS On/Off] set to [On], the
location information of the image may be made available to a third party. To prevent
this, set [GPS On/Off] to [Off] (page 154) (SLT-A65V only).
• This product does not support the Eye-Fi “Endless Memory Mode.” Make sure that
Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned
off.
170
Resetting to the default
You can reset the main functions of the camera.
MENU button t 3 t [Initialize] t Select the desired setting
t [OK]
The items to be reset are as follows.
Shooting functions (Reset Default/Rec mode reset)
Still shooting menu (Reset Default/Rec mode reset)
Items Reset to
Exposure compensation (44) ±0.0
Drive mode (46, 139) Single Shooting
Flash Mode (42, 124) Fill-flash (differs based on whether the
built-in flash is open or not)
Autofocus Mode (111) AF-A
AF area (112) Wide
Object Tracking (112) On
Face Detection (117) On (Regist. Faces)
Smile Shutter (119) Off
ISO (127) AUTO
Metering Mode (122) Multi segment
Flash Comp. (122) ±0.0
White Balance (134) AWB (Auto white balance)
Color Temp./Color Filter (136) 5500K, Color Filter 0
Custom white balance (136) 5500K
DRO/Auto HDR (128) D-Range Optimizer: Auto
Creative Style (132) Standard
Picture Effect (131) Off
Scene Selection (39, 89) Portrait
Movie (104) P
Items Reset to
Image Size (48) L:24M
Aspect Ratio (157) 3:2
171
Resetting to the default
Setup of the camera (Advanced operations)
Movie shooting menu (Reset Default/Rec mode reset)
Custom menu (Reset Default/Custom reset)
Quality (157) Fine
Panorama: Size (48) Standard
Panorama: Direction (93) Right
3D Pan.: Image Size (48) Standard
3D Pan.: Direction (93) Right
Long Exposure NR (159) On
High ISO NR (159) Normal
Flash control (123) ADI flash
AF Illuminator (125) Auto
Color Space (160) sRGB
SteadyShot (86) On
Items Reset to
File Format (105) AVCHD 60i/60p, AVCHD 50i/50p
Record Setting (106) 60i 17M(FH), 50i 17M(FH)
Audio Recording (107) On
Wind Noise Reduct. (107) Off
SteadyShot (86) On
Items Reset to
Eye-Start AF (80) Off
FINDER/LCD Setting (164) Auto
Red Eye Reduction (58) Off
Release w/o Lens (160) Disable
Auto+ Cont. Shooting (88) Auto
Auto+ Image Extract. (88) Auto
Grid Line (161) Off
Auto Review (161) Off
DISP Button(Monitor) (81) Display All Info./Graphic Display/No
Disp. Info./Level
DISP Button(Finder) (81) No Disp. Info./Graphic Display/Level
Items Reset to
172
Resetting to the default
Playback menu (Reset Default)
Memory Card Tool menu (Reset Default)
Setup menu (Reset Default)
Peaking Level (115) Off
Peaking Color (115) White
Live View Display (83) Setting Effect ON
Func. of AEL button (161) AEL hold
ISO Button (162) ISO
Preview Button (162) Shot. Result Preview
Focus Hold Button (60) Focus Hold
Smart Telecon. Button (115, 138) Smart Telecon.
Lens Comp.: Shading (165) Auto
Lens Comp.: Chro. Aber. (165) Auto
Lens Comp.: Distortion (165) Off
Front Curtain Shutter (162) On
Items Reset to
View Mode (146) Folder View(Still)
Slide Show – Interval (147) 3 sec
Slide Show – Repeat (147) Off
Specify Printing – Date Imprint (182) Off
Volume Settings (61) 2
Playback Display (147) Auto Rotate
Items Reset to
File Number (166) Series
Folder Name (166) Standard Form
Items Reset to
Menu start (62) Top
LCD Brightness (163) Auto
Viewfinder Bright. (163) Auto
Items Reset to
173
Resetting to the default
Setup of the camera (Advanced operations)
Others (Reset Default)
GPS Settings – GPS On/Off (154) (SLT-
A65V only)
Off
GPS Settings – GPS Auto Time Cor.
(155) (SLT-A65V only)
–
Power Save (164) 1 Min
HDMI Resolution (152) Auto
CTRL FOR HDMI (152) On
Upload Settings (168) On
USB Connection (175) Auto
Audio signals (63) On
Mode Dial Guide (63) On
Demo Mode (63) Off
Items Reset to
Recording information display (LCD
monitor) (47)
Display All Info.
Recording information display
(Viewfinder) (47)
Level
Playback display (144) Single-image screen (with recording
information)
Items Reset to
174
Confirming the version of the camera
Displays the version of your camera. Confirm the version when a firmware
update is released.
MENU button t 3 t [Version]
Note
• An update can be performed only when the battery level is (3 remaining
battery icons) or more. We recommend that you use a sufficient battery or the AC-
PW10AM AC Adaptor (sold separately).
175
Computer (Advanced operations)
Computer (Advanced operations)
Computer
Connecting the camera to the
computer
Selects the method used for a USB connection when the camera is
connected to a computer or a USB device with a USB cable.
MENU button t 2 t [USB Connection] t Select the desired
setting
Notes
• When this item is set to [Auto], it may take some time to establish a connection.
• If Device Stage* is not displayed with Windows 7, set this item to [Auto].
* Device Stage is a menu screen used to manage connected devices, such as a camera
(Function of Windows 7).
Setting the USB connection
Auto Establishes a Mass Storage or MTP connection
automatically, in accordance with a computer or other USB
devices to be connected. Windows 7 computers are
connected in MTP, and its unique functions are enabled to
use.
MTP Establishes an MTP connection between the camera, a
computer, and other USB devices. Windows 7 computers are
connected in MTP, and its unique functions are enabled to
use. In the case of other computers (Windows Vista/XP, Mac
OS X), the AutoPlay Wizard appears, and the still images in
the recording folder on the camera are imported to the
computer.
Mass Storage Establishes a Mass Storage connection between the camera, a
computer, and other USB devices. Standard mode.
Connecting to the computer
1Insert a sufficiently charged battery pack into the camera, or
connect the camera to a wall outlet (wall socket) using the AC-
PW10AM AC Adaptor (sold separately).
176
Connecting the camera to the computer
“PMB” allows you to easily import images.
For details on “PMB” functions, see the “PMB Help.”
Importing images to the computer without using “PMB”
When the AutoPlay Wizard appears after making a USB connection
between the camera and a computer, click [Open folder to view files] t
[OK] t [DCIM] or [MP_ROOT] t copy the desired images to the
computer.
2Turn on the camera and the computer.
3Check that [USB Connection] in 2 is set to [Mass Storage].
4Connect the camera to your
computer.
• When a USB connection is established
for the first time, your computer
automatically runs a program to
recognize the camera. Wait for a while.
Importing images to the computer (Windows)
1 To a USB terminal of the
computer
USB cable (supplied)
2 To the USB terminal
177
Connecting the camera to the computer
Computer (Advanced operations)
File name
•ssss (file number) stands for any number within the range of 0001 to
9999.
• When [Quality] is set to [RAW & JPEG], the numerical portions of the
name of a RAW data file and its corresponding JPEG file are the same.
Notes
• For operations such as importing AVCHD View movies to the computer, use
“PMB.”
• Use “PMB” to import the movies with GPS location information to a computer
(SLT-A65V only).
• When the camera is connected to the computer, if you operate AVCHD View
movies or folders from the connected computer, images may be damaged or cannot
be played. Do not delete or copy AVCHD View movies on the memory card from
the computer. Sony is not held liable for consequences resulting from such
operations via the computer.
Folder The type of file File name
DCIM folder JPEG file DSC0ssss.JPG
JPEG file (Adobe RGB) _DSCssss.JPG
RAW file DSC0ssss.ARW
RAW file (Adobe RGB) _DSCssss.ARW
MP_ROOT folder MP4 file (1440 × 1080 12M) MAH0ssss.MP4
MP4 file (VGA 3M) MAQ0ssss.MP4
Importing images to the computer (Macintosh)
1Connect the camera to your Macintosh computer first. Double-
click the newly recognized icon on the desktop t the folder
where the images you want to import are stored.
2Drag and drop the image files to the hard disk icon.
The image files are copied to the hard disk.
178
Connecting the camera to the computer
Note
• Use “iMovie” bundled with a Macintosh computer to import or operate AVCHD
View movies.
Perform the procedures from step 1 to 3 below before:
• Disconnecting the USB cable.
• Removing the memory card.
• Turning off the camera.
Note
• Drag and drop the icon of the memory card or the drive icon to the “Trash” icon
beforehand when you use a Macintosh computer, and the camera is disconnected
from the computer.
3Double-click the hard disk icon t the desired image file in the
folder containing the copied files.
The image is displayed.
Deleting the USB connection
1Double-click the disconnect icon
on the tasktray.
Disconnect icon
2Click (USB Mass Storage Device) t [Stop].
3Confirm the device on the confirmation window, then click
[OK].
Windows Vista
Windows XP
179
Computer (Advanced operations)
Creating a movie disc
You can create a disc from AVCHD View movies recorded on the camera.
• Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i
24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in
[Record Setting] are converted by “PMB” in order to create an AVCHD
disc. This conversion can take a long time. Also, you cannot create a disc
with the original image quality. If you want to keep the original image
quality, you must store your movies on a Blu-ray disc (page 180).
You can create a high definition image quality (HD) AVCHD format disc
from AVCHD View movies imported to a computer using the supplied
software “PMB.”
Notes
• Install “PMB” beforehand.
• Still images and MP4 movie files cannot be recorded on the AVCHD format disc.
• It may take a long time to create a disc.
Playing back AVCHD format disc on a computer
You can play back AVCHD format discs using “Player for AVCHD” that
is installed together with “PMB.”
To start the software, click on [Start] t [All Programs] t [PMB] t
[PMB Launcher] t [View] t [Player for AVCHD].
For detailed operations, see the Help for “Player for AVCHD.”
Note
• Movies may not be played smoothly depending on the computer environment.
Creating an AVCHD format disc
1Select the AVCHD View movies you want to write on “PMB.”
2Click (Create Discs) to select [Create AVCHD Format Discs
(HD)].
The screen used for creating a disc appears.
• For details, see “PMB Help.”
180
Creating a movie disc
Creating a Blu-ray disc
You can create a Blu-ray disc with AVCHD View movies previously
imported to a computer. Your computer must support the creation of Blu-
ray discs.
BD-R (non-rewritable) and BD-RE (rewritable) media can be used to create
Blu-ray discs. You cannot add contents to either type of disc once it has
been created.
Click [BD Add-on Software] on the installation screen of “PMB,” and
install this plug-in according to the on-screen instructions.
Connect your computer to the Internet when you install [BD Add-on
Software].
See “PMB Help” for details.
Note
• When movies recorded with the [60p 28M(PS)]/[50p 28M(PS)] setting are copied to
a Blu-ray disc using “PMB,” those movies can be played back only on devices that
are compatible with the AVCHD Ver 2.0 format.
You can create a standard definition image quality (STD) disc from
AVCHD View movies imported to a computer using supplied software
“PMB.”
Notes
• Install “PMB” beforehand.
• MP4 movie files cannot be recorded on a disc.
• It will take a longer time to create a disc because AVCHD View movies are
converted to standard definition image quality (STD) movies.
• An Internet connection environment is required when creating a DVD-Video (STD)
disc for the first time.
Creating a standard definition image quality (STD) disc
1Select the AVCHD View movies you want to write on “PMB.”
2Click (Create Discs) to select [Create DVD-Video Format
Discs (STD)].
The screen used for creating a disc appears.
• For details, see “PMB Help.”
181
Creating a movie disc
Computer (Advanced operations)
You can use 12 cm discs of following type with “PMB.” For Blu-ray disc,
see page 180.
• Always maintain your PlayStation®3 to use the latest version of the
PlayStation®3 system software.
• The PlayStation®3 may not be available in some countries/regions.
Discs you can use with “PMB”
Disc type Features
DVD-R/DVD+R/DVD+R DL Unrewritable
DVD-RW/DVD+RW Rewritable
182
Print (Advanced operations)
Print
Specifying DPOF
Using the camera, you can specify the still images before you print images
at a shop or with your printer. Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You cannot specify the number of images to be printed.
You can date images when printing them. The position of the date (inside
or outside the image, character size, etc.) depends on your printer.
MENU button t 1 t [Specify Printing] t [Date Imprint] t
[On]
Note
• This function may not be provided, depending on the printer.
1MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2Select the image with b/B on the control button.
3Check the mark by pressing the center of the control button.
• To unspecify DPOF, select the image again, then press the center of the
control button.
4Press the MENU button.
5Select [OK] with v, then press the center of the control button.
Date Imprint
183
Cleaning (Advanced operations)
Cleaning (Advanced operations)
Cleaning
Cleaning the camera and a lens
• Do not touch the inside of the camera, such as lens contacts, or the mirror.
Since dust on the mirror or around the mirror may affect the images or the
performance of the camera, blow the dust away using a commercially
available blower*. For details on cleaning the image sensor, see the next
page.
* Do not use a spray blower. Using one may cause a malfunction.
• Clean the camera surface with a soft cloth slightly moistened with water,
then wipe the surface with a dry cloth. Do not use the following as they
may damage the finish or the casing.
– Chemical products such as thinner, benzine, alcohol, disposable cloths,
insect repellent, sunscreen or insecticide, etc.
– Do not touch the camera with the above on your hand.
– Do not leave the camera in contact with rubber or vinyl for a long time.
• Do not use a cleaning solution containing organic solvents, such as
thinner, or benzine.
• When cleaning the lens surface, remove dust using a commercially
available blower. In case of dust that sticks to the surface, wipe it off with
a soft cloth or tissue paper slightly moistened with lens cleaning solution.
Wipe in a spiral pattern from the center to the outside. Do not spray lens
cleaning solution directly onto the lens surface.
Cleaning the camera
Cleaning the lens
184
Cleaning the image sensor
If dust or debris enters the camera and adheres to the image sensor (the part
that acts as the film), it may appear as dark spots on the photo image,
depending on the shooting environment. If there is dust on the image
sensor, clean the image sensor following the steps below.
Notes
• Cleaning cannot be performed when the battery level is 50% or less.
• The camera starts beeping if the battery pack becomes low during cleaning. Stop
cleaning immediately and turn the camera off. The use of an AC-PW10AM AC
Adaptor (sold separately) is recommended.
• The cleaning should be completed quickly.
• Do not use a spray blower because it may scatter water droplets inside the camera
body.
Cleaning the image sensor automatically using the
cleaning mode of the camera
1Confirm that the battery is fully charged (page 23).
2Press the MENU button, then
select 2 with b/B on the
control button.
MENU button
3Select [Cleaning Mode] with v/V,
then press the center of the
control button.
185
Cleaning the image sensor
Cleaning (Advanced operations)
If another cleaning is needed after using the cleaning mode, clean the image
sensor using a blower following the steps below.
4Select [Enter] with v, and press the center of the control
button.
The image sensor vibrates for a short time, and eliminates dust from the
sensor.
5Turn off the camera.
Cleaning the image sensor using a blower
1Perform the cleaning operation described in steps 1 to 4 of
“Cleaning the image sensor automatically using the cleaning
mode of the camera.”
2Detach the lens (page 26).
3Push the V mark on the mirror
lock lever with a finger to lift up
the mirror.
• Be careful not to touch the surface of
the mirror.
Mirror lock lever
186
Cleaning the image sensor
Notes
• After the cleaning is finished, confirm that the mirror is locked down firmly when
you attach the lens. Otherwise, the lens may be scratched or this may be the cause of
additional trouble. Also, if the mirror is not locked down firmly, the autofocus does
not work during shooting.
• You cannot shoot while the mirror is lifted up.
4Use the blower to clean the image
sensor surface and the
surrounding area.
• Do not touch the image sensor with the
tip of the blower and do not put the tip
of a blower into the cavity beyond the
mount.
• Hold the camera’s face downward to
prevent the dust from resettling in the
camera. Complete the cleaning quickly.
• Also clean the back of the mirror using
a blower.
5After the cleaning is finished,
lower the mirror with a finger
until it clicks.
• Lower the frame of the mirror back
down with a finger. Be careful not to
touch the surface of the mirror.
• Lower the mirror down until it locks
firmly.
6Attach the lens and turn the camera off.
• Confirm that the mirror is locked down firmly when you attach the lens.
187
Trouble shooting/Others (Advanced operations)
Trouble shooting/Others (Advanced operations)
Trouble shooting/Others
Troubleshooting
If you experience trouble with your camera, try the following solutions.
Check the items on pages 187 to 195. Consult your Sony dealer or local
authorized Sony service facility.
The battery pack cannot be installed.
• As you insert the battery pack, use the tip of the battery pack to push the
lock lever (page 22).
• You can use an NP-FM500H battery pack only. Make sure that the battery
is NP-FM500H.
The remaining battery indicator is incorrect, or sufficient remaining
battery indicator is displayed but the power runs out too quickly. Cannot
turn on the camera.
• This phenomenon occurs when you use the camera in an extremely hot or
cold location (page 198).
• The battery pack is discharged. Install a charged battery pack (page 20).
• The battery pack is dead (page 209). Replace it with a new one.
• Install the battery pack correctly (page 22).
The power turns off suddenly.
• If you do not operate the camera for given period of time, the camera turns
to power saving mode and nearly shuts down. To cancel the power save,
1Check the following items.
2Remove the battery pack, and insert the battery pack again after
about 1 minute, and turn on the power.
3Reset the settings (page 170).
4Consult your Sony dealer or local authorized Sony service facility.
Battery pack and power
188
Troubleshooting
operate the camera, such as pressing the shutter button halfway down
(page 164).
The CHARGE lamp flashes when charging the battery pack.
• You can use an NP-FM500H battery pack only. Make sure that the battery
is NP-FM500H.
• If you charge a battery pack that has not been used for a long time, the
CHARGE lamp may flash.
• The CHARGE lamp flashes in 2 ways, fast (about 0.15-second intervals)
and slow (about 1.5-second intervals). If it is flashing fast, remove the
battery pack and reattach the same battery pack securely. If the CHARGE
lamp flashes fast again, it suggests that there is something wrong with the
battery pack. Slow flashing indicates that charging is suspended because the
ambient temperature is outside the suitable range for charging the battery
pack. Charging will resume and the CHARGE lamp will be lit when the
ambient temperature returns to within the suitable temperature.
Charge the battery pack under the suitable temperatures between 10°C and
30°C (50°F and 86°F).
Nothing is displayed on the LCD monitor in viewfinder mode when the
power is turned on.
• If you do not operate the camera for given period of time, the camera turns
to power saving mode and nearly shuts down. To cancel the power save,
operate the camera, such as pressing the shutter button halfway down
(page 164).
The image is not clear in the viewfinder.
• Adjust the diopter scale properly using the diopter-adjustment dial
(page 30).
No images in the viewfinder.
• [FINDER/LCD Setting] is set to [Manual]. Press the FINDER/LCD button
(page 164).
• Move your eye a little closer to the viewfinder.
Shooting images
189
Troubleshooting
Trouble shooting/Others (Advanced operations)
The shutter does not release.
• You are using a memory card with a write-protect switch, and the switch is
set to the LOCK position. Set the switch to the recording position.
• Check the free capacity of the memory card.
• You cannot record images while charging the built-in flash (pages 42, 124).
• In autofocus mode, the shutter cannot be released when the subject is out of
focus.
• The lens is not attached properly. Attach the lens properly (page 25).
• When the camera is attached to another device, such as an astronomical
telescope, set [Release w/o Lens] to [Enable] (page 160).
• The subject may require special focusing (page 109). Use the focus-lock or
manual focus function (pages 110, 114).
Recording takes a long time.
• The noise reduction function is turned on (page 159). This is not a
malfunction.
• You are shooting in RAW mode (page 157). Since the RAW data file is
large, the RAW mode shooting may take time.
• The Auto HDR is processing an image (page 128).
The same image is shot several times.
• The drive mode is set to [Cont. Shooting] or [Bracket: Cont.]. Set it to
[Single Shooting] (pages 46, 139).
• The exposure mode is set to Continuous Advance Priority AE (pages 41,
93).
• The exposure mode is set to AUTO+ and [Auto+ Image Extract.] is set to
[Off] (page 88).
The image is out of focus.
• The subject is too close. Check the minimum focal distance of the lens.
• You are shooting in manual focus mode, set the focus mode switch to AF
(autofocus) (page 108).
• When the focus mode switch is equipped with the lens, set it to AF.
• Ambient light is insufficient.
Eye-Start AF does not work.
• Set [Eye-Start AF] to [On] (page 80).
• Press the shutter button halfway down.
190
Troubleshooting
The flash does not work.
• The flash mode is set to [Autoflash]. If you want to make sure the flash fires
without fail, set the flash mode to [Fill-flash] (pages 42, 124).
The flash takes too long to recharge.
• The flash has been fired in succession in a short period. When the flash has
been fired in succession, the recharging process may take longer than usual
to avoid overheating of the camera.
A picture taken with the flash is too dark.
• If the subject is beyond the flash range (the distance that the flash can
reach), the pictures will be dark because the flash light does not reach the
subject. If the ISO is changed, the flash range also changes with it. Check
the flash range in “Specifications.”
The date and time are recorded incorrectly.
• Set the correct date and time (page 28).
• The area selected with [Area Setting] is different from the actual area. Set
up [Area Setting] again (page 28).
The aperture value and/or shutter speed flashes when you press the
shutter button halfway down.
• Since the subject is too bright or too dark, it is beyond the available range of
the camera. Adjust the setting again.
The image is whitish (Flare).
Blurring of light appears on the image (Ghosting).
• The picture was taken under a strong light source, and excessive light has
entered the lens. Attach a lens hood.
The corners of the picture are too dark.
• If any filter or hood is used, take it off and try shooting again. Depending on
the thickness of the filter and improper attachment of the hood, the filter or
the hood may partially appear in the image. The optical properties of some
lenses may cause the periphery of the image to appear too dark (insufficient
light). You may compensate for this phenomenon with [Lens Comp.:
Shading] (page 165).
191
Troubleshooting
Trouble shooting/Others (Advanced operations)
The eyes of the subject come out red.
• Activate the red eye reduction function (page 58).
• Get close to the subject, and shoot the subject within the flash range using
the flash. Check the flash range in “Specifications.”
Dots appear and remain on the LCD monitor.
• This is not a malfunction. These dots are not recorded (page 10).
The image is blurred.
• The picture was taken in a dark location without the flash, resulting in
camera shake. The use of a tripod or the flash is recommended (pages 42,
87, 124).
The EV scale b B is flashing on the LCD monitor or in the viewfinder.
• The subject is too bright or too dark for the metering range of the camera.
Your camera cannot play back images.
• The folder/file name has been changed on your computer (page 175).
• When an image file has been processed by a computer or when the image
file was recorded using a model other than that of your camera, playback on
your camera is not guaranteed.
• Use “PMB” to play images stored on a PC with this camera.
• The camera is in USB mode. Delete the USB connection (page 178).
Your camera cannot delete an image.
• Cancel the protection (page 149).
You have deleted an image by mistake.
• Once you have deleted an image, you cannot restore it. We recommend that
you protect images that you do not want to delete (page 149).
Viewing images
Deleting images
192
Troubleshooting
The camera is not receiving a GPS signal.
• Set [GPS On/Off] to [On] (page 154).
• Your camera may not be able to receive radio signals from GPS satellites
because of obstructions.
• To triangulate the location information correctly, bring your camera to an
open area, and turn on the camera again.
Excessive error in location information.
• The margin of error can be up to several-hundred meters depending on
surrounding buildings, weak GPS signals, etc.
It takes time to triangulate although GPS assist data has been taken in.
• [Date/Time Setup] is not set, or set time is shifted greatly. Set the date and
time correctly (page 28).
• The term of validity of assist data has expired. Update the GPS assist data
(page 155).
• As the positions of GPS satellites vary constantly, it may take longer to
determine the location or the receiver may not be able to determine the
location at all, depending on the location and time you use the camera.
• “GPS” is a system for determining geographic location by triangulating
radio signals from GPS satellites. Avoid using the camera in places where
radio signals are blocked or reflected, such as a shadowy place surrounded
by buildings or trees, etc. Use the camera in open sky environments.
The location information has not been recorded.
• Use “PMB” to import the movies with GPS location information to your
computer.
You do not know if the OS of your computer is compatible with the
camera.
• Check “Using with your computer” (page 66).
Your computer does not recognize your camera.
• Check that the camera is turned on.
GPS (SLT-A65V only)
Computers
193
Troubleshooting
Trouble shooting/Others (Advanced operations)
• When the battery level is low, install the charged battery pack (page 20), or
use the AC Adaptor (sold separately).
• Use the USB cable (supplied) (page 175).
• Disconnect the USB cable, and connect it again firmly.
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks of your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other devices (page 175).
You cannot copy images.
• Make the USB connection by properly connecting the camera with your
computer (page 175).
• Follow the designated copy procedure for your OS (page 176).
• When you shoot images with a memory card formatted by a computer, you
may not be able to copy the images to a computer. Shoot using a memory
card formatted by your camera (page 166).
The image cannot be played back on a computer.
• If you are using “PMB,” refer to the “PMB Help.”
• Consult the computer or software manufacturer.
After making a USB connection, “PMB” does not start automatically.
• Make the USB connection after the computer is turned on (page 175).
Cannot insert a memory card.
• Insertion direction of the memory card is wrong. Insert it in the correct
direction (page 22).
Cannot record on a memory card.
• The memory card is full. Delete unnecessary images (pages 35, 150).
• An unusable memory card is inserted (pages 24, 206).
You have formatted a memory card by mistake.
• All the data on the memory card are deleted by formatting. You cannot
restore it.
Memory card
194
Troubleshooting
Cannot print images.
• RAW images cannot be printed. To print RAW images first, convert them
to JPEG images using “Image Data Converter” on the supplied CD-ROM.
The color of the image is strange.
• When you print the images recorded in Adobe RGB mode using sRGB
printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the
images are printed at a lower intensity level (page 160).
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the
image may be cut off. Especially when you print an image shot with the
aspect ratio set to [16:9], the lateral end of the image may be cut off.
• When printing images using your own printer, cancel the trimming or
borderless settings. Consult the printer manufacturer as to whether the
printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether
they can print the images without cutting off both edges.
Cannot print images with the date.
• Using “PMB,” you can print images with date (page 70).
• This camera does not have a feature for superimposing dates on images.
However, because the images shot with the camera include information on
the recording date, you can print images with the date superimposed if the
printer or the software can recognize Exif information. For compatibility
with Exif information, consult the manufacturer of the printer or the
software.
• When you print images at a shop, images can be printed with the date if you
ask them to do so.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for
about 1 hour before using it (page 198).
Printing
Others
195
Troubleshooting
Trouble shooting/Others (Advanced operations)
The message “Set Area/Date/Time.” appears when you turn on the
camera.
• The camera has been left unused for sometime with a low battery or no
battery pack. Charge the battery pack and set the date again (pages 28, 198).
If the date setting is lost every time the battery pack is charged, consult your
Sony dealer or local authorized Sony service facility.
The number of recordable images does not decrease or decreases 2 at a
time.
• This is because the compression rate and the image size after compression
change depending on the image when you shoot a JPEG image (page 157).
The setting is reset without the resetting operation.
• The battery pack was removed when the power switch was set to ON. When
removing the battery pack, make sure the camera is turned off and the
access lamp is not lit (pages 17, 22).
The camera does not work properly.
• Turn off the camera. Remove the battery pack and insert it again. If the
camera is warm, remove the battery pack, and allow it to cool down before
trying this corrective procedure.
• If an AC Adaptor (sold separately) is used, disconnect the power plug.
Connect the power plug and turn on the camera again. If the camera does
not work after doing these solutions, consult your Sony dealer or local
authorized Sony service facility.
is indicated on the screen.
• The SteadyShot function does not work. You can continue to shoot but the
SteadyShot function will not work. Turn the camera off and on. If the
SteadyShot scale continues to be indicated, consult your Sony dealer or
local authorized Sony service facility.
“--E-” is indicated on the screen.
• Remove the memory card, and insert it again. If this procedure does not turn
off the indication, format the memory card.
196
Trouble shooting/Others (Advanced operations)
Warning
messages
If the following messages appear,
follow the instructions below.
Set Area/Date/Time.
• Set the area, date, and time. If
you have not used the camera for
a long time, charge the internal
rechargeable battery (pages 28,
198).
Power insufficient.
• You tried to perform [Cleaning
Mode] when the battery level is
insufficient. Charge the battery
pack or use the AC Adaptor
(sold separately).
Unable to use memory card.
Format?
•
The memory card was formatted
on a computer and the file format
was modified.
Select [
Enter
], then format the
memory card. You can use the
memory card again, however, all
previous data in the memory card
is erased. It may take a some time
to complete the format.
If the message still appears,
change the memory card.
Memory Card Error
• An incompatible memory card is
inserted or the format has failed.
Reinsert memory card.
• The inserted memory card
cannot be used in your camera.
• The memory card is damaged.
• The terminal section of the
memory card is dirty.
Memory card locked.
• You are using a memory card
with a write-protect switch, and
the switch is set to the LOCK
position. Set the switch to the
recording position.
Processing...
• When Long exposure noise
reduction or High ISO noise
reduction will be done for the
same amount of time that the
shutter was open. You cannot do
any further shooting during this
reduction.
Unable to display.
• Images recorded with other
cameras or images modified with
a computer may not be able to be
displayed.
Check the lens attachment. If the
lens is not supported, you can
permit use of the lens in the
custom menu.
• The lens is not attached properly,
or the lens is not attached.
• When attaching the camera to an
astronomical telescope or
something similar, set [Release
w/o Lens] to [Enable].
197
Warning messages
Trouble shooting/Others (Advanced operations)
Unable to print.
• You tried to mark RAW images
with a DPOF mark.
Camera overheating. Allow it to
cool.
• The camera has become hot
because you have been shooting
continuously.
Turn the power off. Cool the
camera and wait until the camera
is ready to shoot again.
• Because you have been
recording for a long time, the
temperature inside the camera
has increased to an unacceptable
level. Stop recording.
Recording is unavailable in this
movie format.
• Set [File Format] to [MP4].
• The number of images exceeds
that for which date management
in a database file by the camera
is possible.
• Unable to register to the database
file. Import all the images to a
computer using “PMB” and
recover the memory card.
Camera Error
System Error
• Turn the power off, remove the
battery pack, then re-insert it. If
the message appears frequently,
consult your Sony dealer or local
authorized Sony service facility.
Image Database File error. Recover?
• You cannot record or play back
AVCHD View movies because
the Image Database File is
damaged. Follow the on-screen
instructions to recover data.
Unable to magnify.
Unable to rotate image.
• Images recorded with other cameras
may not be magnified or rotated.
Cannot create more folders.
• The folder with a name beginning
with “999” exists on the memory
card. You cannot create any
folders if this is the case.
198
Precautions
Do not use/store the camera in
the following places
• In an extremely hot, dry or humid
place
In places such as in a car parked in
the sun, the camera body may
become deformed and this may
cause a malfunction.
• Storing under direct sunlight or
near a heater
The camera body may become
discolored or deformed, and this
may cause a malfunction.
• In a location subject to rocking
vibration
• Near strong magnetic place
• In sandy or dusty places
Be careful not to let sand or dust get
into the camera. This may cause the
camera to malfunction, and in some
cases this malfunction cannot be
repaired.
• Humid places
These may mold on a lens.
On storing
Be sure to attach the front lens cap
or body cap when not using the
camera. When attaching the body
cap, remove all the dust from the
cap before placing it on the camera.
When you purchase the DT 18-
55mm F3.5-5.6 SAM Lens Kit,
purchase the Rear Lens Cap ALC-
R55 also.
On operating temperatures
Your camera is designed for use
under the temperatures between 0°C
and 40°C (32°F and 104°F). Shooting
in extremely cold or hot places that
exceed this range is not
recommended.
On moisture condensation
If the camera is brought directly from
a cold to a warm location, moisture
may condense inside or outside the
camera. This moisture condensation
may cause a malfunction of the
camera.
How to prevent moisture
condensation
When bringing the camera from a
cold place to a warm place, seal the
camera in a plastic bag and allow it to
adapt to conditions at the new
location over about 1 hour.
If moisture condensation occurs
Turn off the camera and wait about an
hour for the moisture to evaporate.
Note that if you attempt to shoot with
moisture remaining inside the lens,
you will be unable to record clear
images.
On the internal rechargeable
battery
This camera has an internal
rechargeable battery for maintaining
the date and time and other settings
regardless of whether the power is on
or off, or the battery pack is charged
or discharged.
199
Precautions
Trouble shooting/Others (Advanced operations)
This rechargeable battery is
continually charged as long as you
are using the camera. However, if you
use the camera for only short periods,
it discharges gradually, and if you do
not use the camera at all for about 3
months it becomes completely
discharged. In this case, be sure to
charge this rechargeable battery
before using the camera.
However, even if this rechargeable
battery is not charged, you can still
use the camera as long as you do not
record the date and time. If the
camera resets the settings to the
defaults each time you charge the
battery, the internal rechargeable
battery may be dead. Consult your
Sony dealer or local authorized Sony
service facility.
Charging method of the internal
rechargeable battery
Insert a charged battery pack in the
camera, or connect the camera to a
wall outlet (wall socket) using the AC
Adaptor (sold separately), and leave
the camera for 24 hours or more with
the power off.
On using the lenses and
accessories
It is recommended that you use Sony
lenses/accessories* designed to suit
the characteristics of this camera.
Using the products of other
manufacturers may cause the camera
not to operate to its capability, or
result in accidents and malfunctions
of the camera.
* Konica Minolta products are
included.
On memory cards
Do not attach a label, etc. on a
memory card or a card adaptor. This
may cause a malfunction.
On recording/playback
• When you use a memory card with
this camera for the first time, it is
recommended to format the card
using the camera for stable
performance of the memory card
before shooting. Note that
formatting permanently erases all
data on the memory card, and is
unrecoverable. Save precious data
on a computer, etc.
• If you repeatedly record/delete
images, fragmentation of data may
occur on the memory card. Movies
may not be able to be saved or
recorded. In such a case, save your
images to a computer or other
storage location, then format the
memory card (page 166).
• Before you record one-time events,
make a trial recording to make sure
that the camera is working
correctly.
• This camera is neither dust-proof,
nor splash-proof, nor water-proof.
• Do not look at the sun or a strong
light through a removed lens or the
viewfinder. This may cause
irrecoverable damage to your eyes.
Or it may cause a malfunction of
your camera.
200
Precautions
• Do not use the camera near a
location that generates strong radio
waves or emits radiation. The
camera may not be able to record or
play back properly.
• Using the camera in sandy or dusty
locations may cause malfunctions.
• If moisture condensation occurs,
remove it before using the camera
(page 198).
• Do not shake or strike the camera.
In addition to malfunctions and an
inability to record images, this may
render the memory card unusable,
or cause image data breakdown,
damage or loss.
• Clean the flash surface with a soft
cloth or something similar before
use. The heat of flash emission may
cause dirt on the flash surface to
emit smoke or to become burned.
• Keep the camera, supplied
accessories, etc., out of the reach of
children. A memory card, etc., may
be swallowed. If such a problem
occurs, consult a doctor
immediately.
201
Trouble shooting/Others (Advanced operations)
To use your
camera abroad —
Power sources
You can use your camera and the
battery charger and the AC-
PW10AM AC Adaptor (sold
separately) in any country or region
where the power supply is within 100
V to 240 V AC, 50/60 Hz.
Note
• Do not use an electronic
transformer (travel converter), as
this may cause a malfunction.
When you view images on a TV
screen, the camera and TV must use
the same TV color system.
NTSC system (1080 60i)
Bahama Islands, Bolivia, Canada,
Central America, Chile, Colombia,
Ecuador, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan, the
Philippines, the U.S.A., Venezuela,
etc.
PAL system (1080 50i)
Australia, Austria, Belgium, China,
Croatia, Czech Republic, Denmark,
Finland, Germany, Holland, Hong
Kong, Hungary, Indonesia, Italy,
Kuwait, Malaysia, New Zealand,
Norway, Poland, Portugal, Rumania,
Singapore, Slovak Republic, Spain,
Sweden, Switzerland, Thailand,
Turkey, United Kingdom, Viet Nam,
etc.
PAL-M system (1080 50i)
Brazil
PAL-N system (1080 50i)
Argentina, Paraguay, Uruguay
SECAM system (1080 50i)
Bulgaria, France, Greece, Guiana,
Iran, Iraq, Monaco, Russia, Ukraine,
etc.
On TV color systems
202
AVCHD format
The AVCHD format is a high
definition digital video camera format
used to record a high definition (HD)
signal of either the 1080i
specification*1 or the 720p
specification*2 using efficient data
compression coding technology. The
MPEG-4 AVC/H.264 format is
adopted to compress video data, and
the Dolby Digital or Linear PCM
system is used to compress audio
data.
The MPEG-4 AVC/H.264 format is
capable of compressing images at
higher efficiency than that of the
conventional image compressing
format. The MPEG-4 AVC/H.264
format enables a high definition video
signal shot on a digital video camera
recorder to be recorded on 8 cm DVD
discs, hard disk drive, flash memory,
memory card, etc.
Recording and playback on
your camera
Based on the AVCHD format, your
camera records with the high
definition image quality (HD)
mentioned below.
Video signal*3:
1080 60i-compatible device
MPEG-4 AVC/H.264 1920 ×
1080/60i, 1920 × 1080/60p,
1920 × 1080/24p
1080 50i-compatible device
MPEG-4 AVC/H.264 1920 ×
1080/50i, 1920 × 1080/50p,
1920 × 1080/25p
Audio signal: Dolby Digital 2ch
Recording media: Memory card
*1 1080i specification
A high definition specification which
utilizes 1,080 effective scanning lines
and the interlace system.
*2 720p specification
A high definition specification which
utilizes 720 effective scanning lines
and the progressive system.
*3 Data recorded in AVCHD format
other than the above mentioned
cannot be played on your camera.
203
Trouble shooting/Others (Advanced operations)
GPS (SLT-A65V
only)
This system allows you to pinpoint
your exact location on the earth. The
GPS satellites are located in 6 orbits,
20,000 km above the earth. The GPS
system consists of 24 or more GPS
satellites. A GPS receiver receives
radio signals from the satellites, and
calculates the current location of the
receiver based on the orbital
information (almanac data) and travel
time of the signals, etc.
Determining a location is called
“triangulating.” A GPS receiver can
determine the location’s latitude and
longitude by receiving signals from 3
or more satellites.
• As the positions of GPS satellites
vary constantly, it may take longer
to determine the location or the
receiver may not be able to
determine the location at all,
depending on the location and time
you use the camera.
• “GPS” is a system for determining
geographic location by
triangulating radio signals from
GPS satellites. Avoid using the
camera in places where radio
signals are blocked or reflected,
such as a shadowy place
surrounded by buildings or trees,
etc. Use the camera in open sky
environments.
• You may not be able to record
location information at locations or
in situations where radio signals
from the GPS satellites do not reach
the camera as follows.
– In tunnels, indoors or under the
shade of buildings.
– Between tall buildings or at
narrow streets surrounded by
buildings.
– In underground locations,
locations surrounded by dense
trees, under an elevated bridge, or
in locations where magnetic fields
are generated, such as near high
voltage cables.
– Near devices that generate radio
signals of the same frequency
band as the camera: near 1.5 GHz
band mobile telephones, etc.
On triangulating errors
• If you move to another location
right after turning on the camera, it
may take a longer time for the
camera to start triangulating,
compared to when you stay in the
same place.
• Error caused by the position of GPS
satellites
The camera automatically
triangulates your current location
when the camera receives radio
signals from 3 or more GPS
satellites. The triangulating error
allowed by the GPS satellites is
about 30 m (98 feet). Depending on
the environment of the location, the
triangulating error can be greater. In
this case, your actual location may
not match the location on the map
based on the GPS information.
Meanwhile, the GPS satellites are
controlled by the United States
204
GPS (SLT-A65V only)
Department of Defense, and the
degree of accuracy may be changed
intentionally.
• Error during the triangulating
process
The camera acquires location
information every about 15 seconds
during triangulating. There is a
slight time difference between
when the location information is
acquired and when the location
information is recorded on an
image, therefore, the actual
recording location may not match
exactly the location on the map
based on the GPS information.
On the restriction of use of
GPS on an airplane
During take off and landing of an
airplane, turn off the camera, as you
will be instructed to do by the on-
board announcement.
On the other restriction
Use GPS in accordance with the
regulations of the place or situation.
On the geographic coordinate
system
The “WGS-84” geographic
coordinate system is used.
205
Trouble shooting/Others (Advanced operations)
3D-shootings
Notes on recording
• [3D Sweep Panorama] is not
suitable when shooting:
– Subjects are moving.
– Subjects are too close to the
camera.
– Subjects with a repeating pattern
such as tiles, and subjects with
little contrast such as sky, sandy
beach, or lawn.
• [3D Sweep Panorama] recording
may be discontinued in the
following situations:
– You pan or tilt the camera too fast
or too slow.
– There is too much camera shake.
• If you cannot pan or tilt the camera
across the entire subject within the
given time, a black area occurs in
the composed image. If this
happens, move the camera fast to
record a full panoramic image.
• Since several images are stitched
together, the stitched part will not
be recorded smoothly.
• Under low light conditions, images
may be blurred.
• Under lights that flicker such as
fluorescent light, images may not
be recorded properly.
• When the whole angle of 3D
panoramic shooting and the angle
in which you fixed the focus and
exposure with AE/AF lock are
extremely different in brightness,
color and focus, the shooting will
not be successful. If this happens,
change the lock angle and shoot
again.
• The available shooting direction is
horizontal only.
• For details on the procedure used
for shooting 3D-images, see page
40.
Note on playback of 3D-
images
When you play back 3D-images on
the LCD monitor of the camera or on
a non-3D-compatible TV, the images
are played back without the 3D
effect.
Notes on 3D-image files
• A JPEG file and an MPO are
combined to create a 3D-image. If
you erase one of these files from the
computer, the 3D-image may not be
played back properly.
• For details on the procedure used
for viewing 3D-images, see pages
147 and 152.
206
Memory card
• Do not strike, bend or drop the
memory card.
• Do not use or store the memory
card under the following
conditions:
– High temperature locations such
as the hot interior of a car parked
in direct sunlight.
– Locations exposed to direct
sunlight.
– Humid locations or locations with
corrosive substances present.
• The memory card may be hot just
after it has been used for a long
time. Be careful when you handle
it.
• When the access lamp is lit, do not
remove the memory card or the
battery pack, or turn off the power.
The data may be corrupted.
• Data may be damaged if you place
the memory card near strongly-
magnetized material or use the
memory card in a static-prone or
electrically noisy environment.
• We recommend backing up
important data, such as to a hard
disk of a computer.
• When you carry or store the
memory card, put it in the case
supplied with it.
• Do not expose the memory card to
water.
• Do not touch the terminal section of
the memory card with your hand or
a metal object.
• When the write-protect switch of a
memory card is set to the LOCK
position, you cannot perform
operations, such as recording or
deleting images.
• The memory cards formatted with a
computer are not guaranteed to
operate with this camera. Be sure to
format the memory cards using the
camera.
• Data read/write speeds differ
depending on the combination of
the memory cards and the
equipment used.
• Do not press down hard when you
write down on the memo area.
• Do not attach a label on the
memory cards themselves.
• Do not disassemble or modify the
memory cards.
• Do not leave the memory cards
within the reach of small children.
They might accidentally swallow it.
The types of “Memory Stick” media
that can be used with this camera are
as follows. However, proper
operation cannot be guaranteed for all
“Memory Stick PRO Duo” media
functions.
Notes on using memory
cards
Notes on the “Memory
Stick” media used with
the camera
207
Memory card
Trouble shooting/Others (Advanced operations)
“Memory Stick PRO Duo”
media*1*2*3
“Memory Stick PRO-HG Duo”
media*1*2
Available with your camera
“Memory Stick Duo” media
Unavailable with your camera
“Memory Stick” media and “Memory
Stick PRO” media
Unavailable with your camera
*1 This is equipped with MagicGate
function. MagicGate is copyright
protection technology that uses
encryption technology. Data
recording/playback that requires
MagicGate functions cannot be
performed with this camera.
*2 Supports high-speed data transfer
using a parallel interface.
*3 When using “Memory Stick PRO
Duo” media to record movies,
only those marked with Mark2
can be used.
Notes on using “Memory Stick
Micro” media (sold
separately)
• This product is compatible with
“Memory Stick Micro” media
(“M2”). “M2” is an abbreviation for
“Memory Stick Micro” media.
• To use a “Memory Stick Micro”
media with the camera, be sure to
insert the “Memory Stick Micro”
media into an “M2” Adaptor as
large as of Duo size. If you insert a
“Memory Stick Micro” media into
the camera without an “M2”
Adaptor as large as of Duo size, you
might not be able to remove it from
the camera.
• Do not leave the “Memory Stick
Micro” media within the reach of
small children. They might
accidentally swallow it.
208
Battery pack/
Battery charger
• The charging time differs
depending on the remaining
capacity of the battery back or
charging conditions.
• We recommend charging the
battery pack in an ambient
temperature of between 10 to 30°C
(50 to 86°F). You may not be able
to efficiently charge the battery
pack outside of this temperature
range.
• Connect the battery charger to the
nearest wall outlet (wall socket).
• Do not try to charge the battery
pack again right after it has been
charged, or when it has not been
used after being charged. Doing so
will affect the performance of the
battery pack.
• Do not charge any battery pack
other than the “InfoLITHIUM” M
series battery pack in the battery
charger (supplied) with your
camera. Batteries other than the
specified kind may leak, overheat,
or explode if you attempt to charge
them, posing a risk of injury from
electrocution and burns.
• When the CHARGE lamp flashes,
this may indicate a battery error or
that a battery pack other than the
specified type has been installed.
Check that the battery pack is the
specified type. If the battery pack is
the specified type, remove the
battery pack, replace it with a new
one or another one and check if the
battery charger operates correctly.
If the battery charger operates
correctly, a battery error may have
occurred.
• If the battery charger is dirty,
charging may not be performed
successfully. Clean the battery
charger with dry cloth, etc.
• Use only an NP-FM500H battery
pack. Note that the NP-FM55H,
NP-FM50 and NP-FM30 cannot be
used.
• The displayed level may not be
correct under certain circumstances.
• Do not expose the battery pack to
water. The battery pack is not
water-resistant.
• Do not leave the battery pack in
extremely hot places, such as in a
car or under direct sunlight.
Effective use of the battery
pack
• Battery performance decreases in
low temperature surroundings. So,
the time that the battery pack can be
used is shorter in cold places and
the speed of continuous shooting
slows down. We recommend that
you put the battery pack in a pocket
close to your body to warm it up,
and insert it in your camera
immediately before you start
shooting.
• The battery pack will run out
quickly if you use the flash
Notes on using the
battery pack
209
Battery pack/Battery charger
Trouble shooting/Others (Advanced operations)
frequently, use continuous shooting
often, turn the camera on and off
frequently, or set the LCD monitor
brighter.
Battery life
• The battery life is limited. Battery
capacity decreases little by little as
you use it more and more, and as
time passes. If the battery operating
time seems shortened considerably,
a probable cause is that the battery
pack has reached the end of its life.
Buy a new battery pack.
• The battery life varies according to
how it is stored and the operating
conditions and environment in
which each battery pack is used.
How to store the battery pack
If the battery pack is not to be used
for a long time, charge it and then
fully use it up once a year on your
camera before storing the battery
pack in a dry, cool place to prolong
the battery life.
210
The License
Notes on the License
“C Library”, “zlib”, and “libjpeg”
software are provided in the camera.
We provide this software based on
license agreements with their owners
of copyright. Based on requests by
the owners of copyright of these
software applications, we have an
obligation to inform you of the
following. Please read the following
sections.
Read “license3.pdf” in the “License”
folder on the CD-ROM. You will find
licenses (in English) of “C Library”,
“zlib”, and “libjpeg” software.
THIS PRODUCT IS LICENSED
UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-
COMMERCIAL USE OF A
CONSUMER TO
(i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”)
AND/OR
(ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A
CONSUMER ENGAGED IN A
PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO
PROVIDE AVC VIDEO.
NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY
OTHER USE.
ADDITIONAL INFORMATION
MAY BE OBTAINED FROM
MPEG LA, L.L.C.
SEE
HTTP://WWW.MPEGLA.COM
On GNU GPL/LGPL applied
software
The software that is eligible for the
following GNU General Public
License (hereinafter referred to as
“GPL”) or GNU Lesser General
Public License (hereinafter referred
to as “LGPL”) are included in the
camera.
This informs you that you have a
right to have access to, modify, and
redistribute source code for these
software programs under the
conditions of the supplied GPL/
LGPL.
Source code is provided on the web.
Use the following URL to download
it.
http://www.sony.net/Products/Linux/
We would prefer you do not contact
us about the contents of source code.
Read “license2.pdf” in the “License”
folder on the CD-ROM. You will find
licenses (in English) of “GPL”, and
“LGPL” software.
To view the PDF, Adobe Reader is
needed. If it is not installed on your
computer, you can download it from
the Adobe Systems web page:
http://www.adobe.com/
211
Index
Index
Index
Numerics
3D................................. 40, 92, 205
A
Adobe RGB.............................. 160
AE Lock ................................... 121
AEL button .............................. 159
AF area..................................... 112
AF illuminator.......................... 125
Ambient light ........................... 142
Anti-dust function .................... 184
Aperture ..................................... 95
Aperture Priority ........................ 95
Area Setting ............................... 29
Aspect ratio .............................. 157
Audio signals ............................. 63
Auto HDR ................................ 129
Auto review.............................. 161
AUTO+ ................................ 38, 88
Auto+ Cont. Shooting ................ 88
Auto+ Image Extract.................. 88
Autoflash............................ 42, 124
Autofocus................................. 108
Autofocus mode ....................... 111
AVCHD ..................... 72, 106, 202
B
Battery pack ................. 20, 22, 208
Bracket ..................................... 140
“BRAVIA” Sync...................... 152
BULB shooting ........................ 100
C
Center weighted ....................... 122
Charging battery pack ................ 20
Cleaning mode ......................... 184
Color filter................................ 136
Color Space .............................. 160
Color temperature .................... 136
Compression ratio .................... 157
Computer.................................... 66
Continuous Advance Priority AE
......................................... 41, 93
Continuous AF ......................... 111
Continuous bracket .................. 140
Continuous shooting ................ 139
Contrast .................................... 132
Control button ............................ 53
Creative Style........................... 132
CTRL FOR HDMI ................... 152
Custom white balance .............. 136
D
Date imprint ............................. 182
Date/Time setup ......................... 28
DC IN terminal........................... 17
Delete ................................. 35, 150
Digital level gauge ..................... 83
Diopter-adjustment..................... 30
Disc creation ...................... 72, 179
212
Index
DPOF Setup..............................182
D-Range Optimizer ..................128
Drive mode .........................46, 139
E
Enlarged image ...........................50
EV scale............................100, 141
Exposure compensation..............44
Eyecup ........................................80
Eye-Fi .......................................168
Eyepiece sensor ..........................15
Eye-Start AF ...............................58
F
Face Detection ..........................117
Face Registration ......................118
File Number..............................166
Fill-flash .............................42, 124
Flash bracket.............................140
Flash compensation ..................122
Flash control .............................123
Flash mode....................42, 78, 124
Flash Off .................31, 42, 88, 124
Fn button...............................53, 55
Focus.........................................108
Focus Hold Button......................60
Focus indicator .........................109
Focus Magnifier........................115
Focus mode...............................111
Focus-lock ................................110
Folder Name .............................166
Format.......................................166
Func. of AEL button ................ 161
G
GPS .................................. 154, 203
GPS assist data......................... 155
GPS Auto Time Cor................. 155
Grid Line.................................. 161
H
Hand-held Twilight.............. 39, 89
HDMI Resolution .................... 152
High ISO NR ........................... 159
High-speed sync....................... 124
Histogram .................................. 82
I
Image Data Converter................ 69
Image Index ............................... 51
Image quality ........................... 157
Image size .................................. 48
ISO sensitivity ......................... 127
J
JPEG ........................................ 157
L
Landscape ............................ 39, 89
Language.................................... 63
LCD brightness ........................ 163
LCD monitor................ 74, 84, 144
Lens............................................ 25
Lens Comp.: Chromatic Aberration
............................................. 165
213
Index
Index
Lens Comp.: Distortion............ 165
Lens Comp.: Peripheral Shading
............................................. 165
Live View Display ..................... 83
Long exp.NR............................ 159
M
Macro ................................... 39, 89
Manual Exposure ....................... 99
Manual focus............................ 114
Memory card...................... 22, 206
Menu .......................................... 57
Metering mode ......................... 122
Moisture condensation ............. 198
Movie Audio Recording .......... 107
Movie File Format ................... 105
Multi frame noise reduction..... 127
Multi segment .......................... 122
N
New Folder .............................. 167
Night Portrait ....................... 39, 89
Night Scene.......................... 39, 89
O
Object Tracking ....................... 112
P
Picture Effect ........................... 131
PlaybackDisplay ...................... 147
PMB ........................................... 70
PMB Launcher ........................... 69
Portrait.................................. 39, 89
Power Save............................... 164
Preset white balance................. 135
Pressing halfway down .............. 32
Preview....................................... 97
Preview Button......................... 162
Print.......................................... 182
Program Auto ............................. 94
Protect ...................................... 149
Q
Quality...................................... 157
R
RAW ........................................ 157
Rear sync............................ 42, 124
Record Setting.......................... 106
Recording movies .............. 33, 103
Recover Image DB................... 168
Red Eye Reduction..................... 58
Reducing camera shake.............. 86
Release w/o Lens ..................... 160
Remote Commander .......... 17, 142
Reset......................................... 170
Rotate ....................................... 146
S
Saturation ................................. 132
Scene Selection .................... 39, 89
Select REC Folder.................... 167
Self-timer ................................. 140
Set the clock ............................... 28
214
Index
Sharpness ..................................132
Shooting......................................31
Shooting Tip ...............................64
Shoulder strap .............................17
Shutter Priority ...........................97
Shutter speed ..............................97
Single Bracket ..........................140
Single-shot AF..........................111
Slide show ................................147
Slow sync............................42, 124
Smart teleconverter...................138
Smile Shutter ............................119
Software......................................68
Sports Action ........................39, 89
Spot...........................................122
SteadyShot function....................86
Sunset ...................................39, 89
Sweep Panorama ............40, 48, 91
Sweep Shooting ....................40, 91
U
USB connection........................175
V
Version .....................................174
View Mode ...............................146
Viewfinder ................................164
Viewing image....................34, 146
Viewing images on a TV screen
........................................52, 152
W
White balance .......................... 134
White balance bracket.............. 142
Wind Noise Reduc. .................. 107
Wireless flash........................... 124
Wireless Remote Commander
............................................. 142