Table of Contents
Sony UBP-X800 User Manual
Displayed below is the user manual for UBP-X800 by Sony which is a product in the DVD/Blu-Ray Players category. This manual has pages.
Related Manuals
masterpage:Right
UBP-X800
4-687-310-11(1)
VIDEO/AUDIO
TM
UBP-X800
4-687-310-11(1)
Ultra HD Blu-ray™ /
DVD Player
Thank you for your purchase. Before using this player,
please read this operating instructions carefully.
The software of this player may be updated in the future.
Please visit the following website:
www.sony.eu/support
Operating Instructions
Getting Started
Playback
Settings and Adjustments
Additional Information
2
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\010COVTOC.f
m
Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started
Supplied Accessories . . . . . . . . . . . . . . . . 6
Guide to Parts and Controls . . . . . . . . . . . 7
Step 1: Connecting the Player . . . . . . . . . 10
Step 2: Network Connection . . . . . . . . . . 12
Step 3: Easy Setup . . . . . . . . . . . . . . . . . . .13
Playback
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . .14
Playing from a USB Device . . . . . . . . . . . .14
Playing via a Network . . . . . . . . . . . . . . . .15
Listening to Audio through a Bluetooth®
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Available Options . . . . . . . . . . . . . . . . . . .17
Settings and Adjustments
Using the Settings Displays . . . . . . . . . . .19
[Software Update] . . . . . . . . . . . . . . . . . . .19
[Screen Settings] . . . . . . . . . . . . . . . . . . . .19
[Audio Settings] . . . . . . . . . . . . . . . . . . . . 20
[Bluetooth Settings] . . . . . . . . . . . . . . . . .21
[BD/DVD Viewing Settings] . . . . . . . . . . 22
[Parental Control Settings] . . . . . . . . . . . 23
[Music Settings] . . . . . . . . . . . . . . . . . . . . 23
[System Settings] . . . . . . . . . . . . . . . . . . . 23
[Network Settings] . . . . . . . . . . . . . . . . . . 24
[Easy Setup] . . . . . . . . . . . . . . . . . . . . . . . 24
[Resetting] . . . . . . . . . . . . . . . . . . . . . . . . 25
Additional Information
Troubleshooting . . . . . . . . . . . . . . . . . . . 26
Playable discs . . . . . . . . . . . . . . . . . . . . . 29
Playable types of files . . . . . . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . . . 33
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the appliance.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The mains lead must be changed only at a
qualified service shop.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this Ultra HD Blu-ray/DVD player is harmful to
eyes, do not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective
housing inside the enclosure.
This appliance is classified as a CLASS 1 LASER
product. The CLASS 1 LASER PRODUCT MARKING
is located on the rear exterior.
3
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\010COVTOC.f
m
Notice for customers in the United
Kingdom and Republic of Ireland
A molded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the
supplied one and approved by ASTA or BSI to
BS1362, (i.e., marked with or mark) must
be used. If the plug supplied with this
equipment has a detachable fuse cover, be sure
to attach the fuse cover after you change the
fuse. Never use the plug without the fuse cover.
If you should lose the fuse cover, please contact
your nearest Sony service station.
Disposal of waste batteries and
electrical and electronic
equipment (applicable in the
European Union and other
European countries with
separate collection systems)
This symbol on the product, the battery or on the
packaging indicates that the product and the
battery shall not be treated as household waste.
On certain batteries this symbol might be used
in combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead. By ensuring
these products and batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
by inappropriate waste handling. The recycling
of the materials will help to conserve natural
resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only. To ensure that the battery and the
electrical and electronic equipment will be
treated properly, hand over these products at
end-of-life to the applicable collection point for
the recycling of electrical and electronic
equipment. For all other batteries, please view
the section on how to remove the battery from
the product safely. Hand the battery over to the
applicable collection point for the recycling of
waste batteries. For more detailed information
about recycling of this product or battery,
plsease contact your local Civic Office, your
household waste disposal service or the shop
where you purchased the product or battery.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japan. Inquiries related to
product compliance based on European Union
legislation shall be addressed to the authorized
representative, Sony Belgium, bijkantoor van
Sony Europe Limited, Da Vincilaan 7-D1, 1935
Zaventem, Belgium. For any service or
guarantee matters, please refer to the addresses
provided in the separate service or guarantee
documents.
Notice for the customers in Europe
This product is intended to be used in the
following countries:
AL, AT, BA, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI,
FR, GB, GR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MD,
ME, MK, MT, NL, NO, PL, PT, RO, RS, SE, SI, SK,
Kosovo.
Hereby, Sony Corporation declares that this
equipment is compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. For details, please access
the following URL:
http://www.compliance.sony.de/
PRECAUTIONS
• This unit operates on 220 V - 240 V AC,
50/60 Hz. Check that the unit’s operating
voltage is identical with your local power
supply.
• Install this unit so that the mains lead can be
unplugged from the wall socket
immediately in the event of trouble.
• 5,150 - 5,350 MHz band is restricted to
indoor operations only.
• This equipment has been tested and found
to comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 metres.
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
• To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
• Do not expose the appliance to naked flame
sources (for example, lighted candles).
• Do not install this player in a confined
space, such as a bookshelf or similar unit.
4
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\010COVTOC.f
m
• Do not place the player outdoors, in
vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
• Do not place metal objects in front of the
front panel. It may limit reception of radio
waves.
• Do not place the player in a place where
medical equipment is in use. It may cause a
malfunction of medical instruments.
• If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device before
using the wireless LAN function.
• This player should be installed and
operated with a minimum distance of at
least 20 cm or more between the player and
a person’s body (excluding extremities:
hands, wrists, feet and ankles).
• Do not place heavy or unstable objects on
the player.
• Do not place any objects other than discs on
the disc tray. Doing so may cause damage
to the player or the object.
• Take out any discs from the tray when you
move the player. If you don’t, the disc may
be damaged.
• Disconnect the AC power cord (mains lead)
and all other cables from the player when
you move the player.
• The player is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
player itself has been turned off.
• Disconnect the player from the wall outlet if
you are not going to use the player for a
long time. To disconnect the AC power cord
(mains lead), grasp the plug itself; never
pull the cord.
• Observe following points to prevent the AC
power cord (mains lead) being damaged.
Do not use the AC power cord (mains lead)
if it is damaged, as doing so may result in an
electric shock or fire.
– Do not pinch the AC power cord (mains
lead) between the player and wall, shelf,
etc.
– Do not put anything heavy on the AC
power cord (mains lead) or pull on the AC
power cord (mains lead) itself.
• Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. Your ears and the speakers
may be damaged when the sound level
reaches the peak.
• Clean the cabinet, panel, and controls with
a soft cloth. Do not use any type of abrasive
pad, scouring powder or solvent such as
alcohol or benzine.
• Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
• In the events that this player is repaired,
repaired parts may be collected for reuse or
recycling purposes.
• Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
– Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
– Be sure to disconnect the HDMI cable
when moving the player.
– Hold the HDMI connector straight when
connecting or disconnecting the HDMI
cable. Do not twist or force the HDMI
connector into the HDMI OUT jack.
5
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\010COVTOC.f
m
On watching 3D video images
Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while
watching 3D video images. Sony
recommends that all viewers take regular
breaks while watching 3D video images. The
length and frequency of necessary breaks will
vary from person to person. You must decide
what works best. If you experience any
discomfort, you should stop watching the 3D
video images until the discomfort ends;
consult a doctor if you believe necessary. You
should also review (i) the instruction manual
and/or the caution message of any other
device used with, or Blu-ray Disc contents
played with this product and (ii) our website
(www.sony.eu/myproducts/) for the latest
information. The vision of young children
(especially those under six years old) is still
under development. Consult your doctor
(such as a pediatrician or eye doctor) before
allowing young children to watch 3D video
images. Adults should supervise young
children to ensure they follow the
recommendations listed above.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
IMPORTANT NOTICE
Caution: This player is capable of holding a
still video image or on-screen display image
on your television screen indefinitely. If you
leave the still video image or on-screen
display image displayed on your TV for an
extended period of time you risk permanent
damage to your television screen. Plasma
display panel televisions and projection
televisions are susceptible to this.
6
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\020WAR.fm
Getting Started
Supplied Accessories
• Remote commander (remote) (1)
• R03 (size AAA) batteries (2)
Insert two R03 (size AAA) batteries by
matching the + and – ends on the batteries to
the markings inside the battery
compartments of the remote.
Inserting batteries into the remote
control
7
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Getting Started
Guide to Parts and Controls
ADoor tray
BRemote sensor
CZ (open/close)
D1 (on/standby)
Turns on the player, or sets to standby
mode.
EPower indicator
Lights up when the player is turned on.
F (USB) jack cover
Lift the cover to connect a USB
device to this jack. See page 14.
ALAN (100) terminal
BHDMI OUT 1 jack (VIDEO/AUDIO)
Outputs digital video and audio signal.
CHDMI OUT 2 jack (AUDIO ONLY)
Outputs digital audio signal only.
Please remove the attached sticker to use
the jack.
DDIGITAL OUT (COAXIAL) jack
Front panel
F
C
E
D
BA
Rear panel
Getting Started
8
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
The available functions of the remote are
different depending on the disc or the
situation.
z
N , TV 2+, and AUDIO buttons have a tactile
dot. Use the tactile dot as a reference when
operating the player.
AZ(open/close)
Opens or closes the door tray.
TV 1 (TV on/standby)
Turns on the TV, or sets to standby mode.
1 (on/standby)
Turns on the player, or sets to standby
mode.
NET SERVICE
Returns to the previous online service
portal.
TV t (TV input select)
Switches between TV and other input
sources.
BLUETOOTH (page 16)
• Scan device list will appear if this player
has no paired Bluetooth device.
• Connect to the last connected device if
this player has a paired Bluetooth
device. If the connection fails, scan
device list will appear.
• Disconnect the connected Bluetooth
device.
BColour buttons (red/green/yellow/
blue)
Shortcut keys for interactive functions.
C (favourite) (page 13)
Accesses the application registered as
favourite.
NETFLIX
Accesses the “NETFLIX” online service.
For further NETFLIX online service details,
visit the following website and check the
FAQ:
www.sony.eu/support
TOP MENU
Opens or closes the Ultra HD Blu-ray/BD/
DVD’s Top Menu.
POP UP/MENU
Opens or closes the Ultra HD Blu-ray/BD/
DVD’s menu.
OPTIONS (page 17)
Displays the available options on the
screen.
RETURN
Returns to the previous display.
Remote
9
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Getting Started
</M/m/,
Moves the highlight to select a displayed
item.
z
•M/m as a shortcut key to launch track
search window and input track number
during music CD playback.
•M/m as a shortcut key to rotate photo
clockwise/counterclockwise by 90
degrees.
•</, as a shortcut key to perform seek
functions during Home Network video
playback.
•</, as a shortcut key to change still
image when it is enabled to change.
Centre button (ENTER)
Enters the selected item.
HOME
Enters the player’s home screen.
Dm/M (fast reverse/fast forward)
• Fast reverse/fast forward the disc when
pressed during playback. The search
speed changes each time you press the
button.
• Plays in slow motion when pressed for
more than one second in pause mode.
• Plays one frame at a time when pressed
for a short time in pause mode.
N (play)
Starts or re-starts playback.
./> (previous/next)
Skips to the previous/next chapter, track,
or file.
X (pause)
Pauses or re-starts playback.
SUBTITLE (page 22)
Selects the subtitle language when multi-
lingual subtitles are recorded on Ultra HD
Blu-ray/BD/DVD.
x (stop)
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
AUDIO (page 22)
Selects the language track when multi-
lingual tracks are recorded on Ultra HD
Blu-ray/BD/DVD.
Selects the sound track on CDs.
(muting)
Turns off the TV sound temporarily.
TV 2 (volume) +/–
Adjusts the TV volume.
DISPLAY
Displays the playback information on the
screen.
To lock the disc tray (Child Lock)
You can lock the disc tray to avoid accidental
opening of the tray.
While the player is turned on, press x (stop),
HOME, and then TOP MENU button on the
remote to lock or unlock the tray.
Hold down TV 1 and the TV manufacturer’s
code using the remote buttons for 2 seconds.
If more than one remote button is listed, try
entering them one at a time until you find the
one that works with your TV.
Code numbers of controllable TVs
Manufacturer Remote Button
Sony (Default) NET SERVICE
Philips TV t /
BLUETOOTH / POP
UP/MENU
Panasonic Colour button (red) /
NETFLIX
Hitachi Colour button
(green)
Sharp Colour button
(yellow)
Toshiba Colour button (blue)
Loewe (favourite)
Samsung TOP MENU
LG/Goldstar RETURN
10
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Step 1: Connecting the Player
* Premium High Speed HDMI Cable (not supplied) or High Speed HDMI Cable that supports 18 Gbps
bandwidth (not supplied).
b
• To enjoy 4K Ultra HD 60p content, you need to connect the player to your 4K TV using Premium High
Speed HDMI Cable or High Speed HDMI Cable that supports 18 Gbps bandwidth.
• 4K output requires a compatible 4K display which has HDCP2.2 capable HDMI input.
• If you use BRAVIA TV that supports 4K60p, set the TV’s “HDMI signal format” setting to “Enhanced
format”.
Do not connect the mains lead until you have made all the connections.
Connecting to your TV
HDMI Cable*
11
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Getting Started
Select A, B or C connection methods according to the input jacks on your AV amplifier
(receiver).
* Premium High Speed HDMI Cable (not supplied) or High Speed HDMI Cable that supports 18 Gbps
bandwidth (not supplied).
Connecting to your AV amplifier (receiver)
A4K AV amplifier (receiver)
BNon-4K AV amplifier (receiver) with HDMI IN
CNon-4K AV amplifier (receiver) without HDMI IN
t To enjoy Bitstream (Dolby/DTS), set [BD Audio MIX Setting] in [Audio Settings] (page 21).
HDMI Cable*HDMI Cable*
High Speed HDMI Cable
(not supplied)
HDMI Cable*
Coaxial digital
cable
(not supplied)
HDMI Cable*
12
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Step 2: Network Connection
If you are not going to connect the player to a network, proceed to “Step 3: Easy Setup” (page 13).
z
The use of a shielded and straight interface cable (LAN cable) is recommended.
z
No cable assembly required between the player and the wireless LAN router.
Wired Setup
Wireless Setup
ModemRouter Internet
LAN cable
(not supplied)
LAN cable
(not supplied)
Wireless
LAN Router
Modem Internet
LAN cable
(not supplied)
13
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\030STU.fm
Getting Started
Step 3: Easy Setup
1Plug the player into the mains.
2Press 1 to turn on the player. Power
indicator lights up..
3Turn on the TV and press TV t button on
the remote to set the input selector. This
will show the signal from the player on
your TV screen.
4Perform [Easy Setup].
Follow the on-screen instructions to make
the basic settings using </M/m/, and
press ENTER on the remote.
b
• When [Easy Setup] is complete, select [Easy
Network Settings] to use the network functions
of the player.
• To enable wireless connection, set [Internet
Settings] in [Network Settings] to [Wireless
Setup].
• To disable wireless connection, set [Internet
Settings] in [Network Settings] to [Wired
Setup].
• If there is no output or black screen appears,
refer to “Troubleshooting” (page 26).
The home screen appears when you press
HOME. Select an application using
</M/m/,, and press ENTER.
[My Apps]: Manages favourite application.
You may add shortcuts for application from
[All Apps].
[Featured Apps]: Displays recommended
application.
[All Apps]: Shows all available applications.
You can add applications to [My Apps] by
pressing OPTIONS, and select [Add to My
Apps].
[Setup]: Adjusts the player’s settings.
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
[Move Application]: Arranges applications in
[My Apps].
[Remove Application]: Deletes applications
in [My Apps].
[Register as Favourite]: Registers 1
application into (favourite) remote button.
[Data Contents]: Displays the contents of the
mixed disc.
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
to mains
ENTER
</M/m/,
Home screen display
Available options
Ultra HD Blu-ray Player
U
Ul
tra HD Blu
-ray
y
P
l
a
y
er
ay
yy
Application Tools
14
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\040PLY.fm
Playback
Playing a Disc
For “Playable discs”, see page 29.
1Press Z (open/close), and place a disc on
the disc tray.
2Press Z (open/close) to close the disc tray.
Playback starts.
If playback does not start automatically,
select [Video], [Music], or [Photo] category
in (Disc), and press ENTER.
z
(Mixed disc) contains data contents. Press
OPTIONS on the remote and select [Data
Contents] to display any available contents.
1Prepare for 4K Ultra HD Blu-ray playback.
•Connect the player to your 4K TV using
a Premium High Speed HDMI Cable.
•To view 4K Ultra HD 60p content, make
sure that the proper setting is selected
in HDMI settings on your TV.
•If you use BRAVIA TV that supports
4K60p, set the TV’s “HDMI signal
format” setting to “Enhanced format”.
2Insert a 4K Ultra HD Blu-ray disc.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
b
When playing a 4K Ultra HD Blu-ray disc with no
disc key, it requires network connection
depending on the network environment and
official key server (Studio).
1Prepare for Blu-ray 3D disc playback.
• Connect the player to your 3D-
compatible devices using a High Speed
HDMI Cable.
• Set [3D Output Setting] and [TV Screen
Size Setting for 3D] in [Screen Settings]
(page 19).
2Insert a Blu-ray 3D disc.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
z
Refer also to the instruction manuals supplied
with your TV and the connected device.
Playing from a USB Device
For “Playable types of files”, see page 31.
1Lift the USB jack cover.
2Connect the USB device to the USB jack on
the player.
3Select [USB device] using
</M/m/,, and press ENTER.
4Select [Video], [Music], or [Photo] category
using M/m, and press ENTER.
Enjoying 4K Ultra HD Blu-ray
Playing side facing down
Enjoying Blu-ray 3D
15
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\040PLY.fm
Playback
Playing via a Network
A Home Network-compatible product can
play video/music/photo files stored on
another Home Network-compatible product
via a network.
Prepare to use Home Network.
1Connect the player to a network (page 12).
2Prepare the other necessary Home
Network- compatible products. Refer to
the instruction manual supplied with the
product.
To play a file from a Home Network server via
this unit (Home Network player)
Select [Video], [Music], or [Photo] category
from [Media Server] in [All Apps], then
choose the file you want to play.
To play a file from a Home Network server via
another product (Renderer)
When you play files from a Home Network
Server on this unit, you can use a Home
Network Controller-compatible product (a
phone, etc.), to control playback.
Control this unit using a Home Network
controller. Refer to the instruction manual
supplied with the Home Network controller.
“Video & TV SideView” is a free mobile
application for remote devices (such as
smartphone, etc.). By using “Video & TV
SideView” with this player, you can easily
enjoy the player by using the operation on
your remote device. You can launch a service
or application directly from the remote device
and view the disc information during disc
playback. “Video & TV SideView” also can be
used as a remote control and software
keyboard.
Before you use the “Video & TV SideView”
device with this player for the first time, be
sure to register the “Video & TV SideView”
device. Follow the on-screen instructions on
the “Video & TV SideView” device for
registration.
b
The registration can only be performed on the
home screen.
SongPal is a dedicated app for operating
SongPal-compatible audio devices (e.g.
wireless speaker) that are manufactured by
Sony. You can listen to music stored on your
audio CD (CD-DA) and USB device with this
player from multiple places under the same
network. For more information, please visit
http://sony.net/nasite/. You are required to
use your mobile device (smartphone or
tablet) and wireless router to use this app.
Search for SongPal on Google Play™ or the
App Store and download using your mobile
device.
Playing files on a Home Network
Server Player
Server
Controller
Renderer
Using “Video & TV SideView”
Using SongPal Link/SongPal
16
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\040PLY.fm
Connecting to a mobile device
1Connect the player to a network (page 12).
2Set [Auto Home Network Access
Permission] in [Network Settings] to [On].
3Connect your mobile device to the same
SSID (network) by Wi-Fi.
4Launch and follow the instructions on
SongPal app.
z
• For further SongPal apps details, visit
http://songpal.sony.net/
• For SongPal Link/SongPal Help, visit
http://info.songpal.sony.net/help/
“Screen mirroring” is a function to display the
screen of a mobile device on the TV by
Miracast technology.
The player can be connected directly with a
Screen mirroring compatible device (e.g.
smartphone, tablet). You can enjoy the
display screen of the device on your large TV
screen. No wireless router (or access point) is
required to use this feature.
b
• When using Screen mirroring, the quality of
picture and sound may sometimes be
deteriorated due to interference from other
network. You may improve by adjusting
[Screen mirroring RF Setting] (page 24).
• Some network functions may not be available
during Screen mirroring.
• Make sure that the device is compatible with
Miracast. Connectivity with all Miracast
compatible devices is not guaranteed.
1Select [Screen mirroring] from home
screen using </M/m/,, and press
ENTER.
2Follow the on-screen instructions.
Listening to Audio through a
Bluetooth® Device
You can enjoy wireless playback of audio
from this player on a Bluetooth wireless
technology compatible device.
You need to pair the Bluetooth device and
this player to each other before connection.
b
This function is only supported with Bluetooth
speaker or Bluetooth headphone. Smartphone is
not supported.
Example:
Connecting to a Bluetooth device
Set [Bluetooth Mode] in [Bluetooth Settings]
to [On] (page 21) before pairing a Bluetooth
device with this player.
1Place the Bluetooth device within 1 meter
from the player.
2Perform any of the following steps:
–When connecting to a device for the
first time, press BLUETOOTH button on
the remote.
–Select [Bluetooth Device] option on the
playback screen.
–Select [Device List] in [Bluetooth
Settings].
3Set the Bluetooth device in pairing mode.
For details on setting the Bluetooth device
in pairing mode, refer to the instruction
manual supplied with the device.
4Press M/m repeatedly to select the device
you want, and press ENTER.
When the Bluetooth connection is
established, the device name will appear
on the TV screen.
Using Screen mirroring
Smartphone Player
Speaker
Headphone
or
17
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\040PLY.fm
Playback
Adjusting the Volume
1Start playback content.
2Adjust the volume of the Bluetooth device
first. If the volume level is still low/high,
press OPTIONS on the remote during
playback screen and select [Bluetooth
Volume], then press M/m to adjust the
volume.
b
• Some Bluetooth device does not support
volume control.
• Do not use high volume from the start or for a
long period. Your ears and the audio device
may be damaged.
Disconnecting the Bluetooth device
Perform any of the following steps:
– Press BLUETOOTH button on the remote
(page 8).
– Disable the Bluetooth function on the
Bluetooth device.
– Turn off the player or the Bluetooth device.
b
Before you turn off your Bluetooth device, turn
down the volume level of your TV to avoid
sudden high volume outbursts.
You can enjoy audio playback from this
player via a Bluetooth device and HDMI
output simultaneously.
To set this function, perform any of the
following steps:
– Set [Bluetooth Output] in [Bluetooth
Settings] to [Bluetooth + HDMI].
– Press OPTIONS on the remote during any
playback and select [Bluetooth Output],
then select [Bluetooth + HDMI].
b
– Same audio content is output via Bluetooth
device and HDMI output.
– This feature cannot establish Surround system.
– HDMI audio format may be changed.
– Audio output timing between HDMI and
Bluetooth may not synchronise.
– If the Bluetooth speaker is far from the player,
in a different room, or separated by a wall,
Bluetooth connection will be unstable.
Available Options
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
Common options
x[Repeat Setting]*1: Sets the repeat mode.
x[Play]/[Stop]: Starts or stops the playback.
x[Play from start]: Plays the item from the
beginning.
x[Bluetooth Output]*2: Switches between
audio output from Bluetooth device only or
from both Bluetooth device and HDMI
output during Bluetooth connection.
x[Bluetooth Device]*2: Displays Bluetooth
device list.
x[Bluetooth Volume]*2: Displays the
Bluetooth volume control view. This option
item is only available when the Bluetooth
device is connected.
Video only
x[3D Output Setting]: Sets whether or not
to output 3D video automatically.
x[A/V SYNC]: Adjusts the gap between
picture and sound, by delaying the sound
output in relation to the picture output
(0 to 120 milliseconds).
x[HDR Conversion]*3: Converts High
Dynamic Range (HDR) signal to Standard
Dynamic Range (SDR) signal when the
player is connected to a TV or a Projector
that does not support HDR input. A picture
is more similar to HDR when larger value is
selected, but lowers overall brightness.
x[Video Settings]:
– [Picture Quality Mode]: Selects the
picture settings for different lighting
environments.
z[Direct]
z[Brighter Room]*4
z[Theatre Room]*4
z[Auto]
z[Custom1]/[Custom2]
x[FNR]: Reduces the random noise
appearing in the picture.
x[BNR]: Reduces the mosaic-like block
noise in the picture.
x[MNR]: Reduces minor noise around
the picture outlines (mosquito noise).
Listening to Audio through a
Bluetooth device and HDMI output
18
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\040PLY.fm
x[Contrast]
x[Brightness]
x[Colour]
x[Hue]
x[Pause]: Pauses the playback.
x[Title Search]: Searches for a title on Ultra
HD Blu-ray/BD/DVD VIDEO and starts
playback from the beginning.
x[Chapter Search]: Searches for a chapter
and starts playback from the beginning.
Music only
x[Track Search]: Searches the track number
during music CD playback.
x[Add Slideshow BGM]: Registers music
files in the USB memory as slideshow
background music (BGM).
x[Music Search]: Displays information on
the audio CD (CD-DA) based on Gracenote
technology.
Searches for related information using
keywords from Gracenote when selecting
[Track], [Artist] or [Related].
Displays a list of titles when selecting
[Playback History] or [Search History].
x[Shuffle Setting]: Set to [On] to playback
music files in randomised order.
x[Group Search]: Searches for the group
number during DVD AUDIO playback.
Video and Music only
x[Top Menu]: Displays the Ultra HD Blu-ray/
BD/DVD’s Top Menu.
x[Menu]/[Popup Menu]: Displays the Ultra
HD Blu-ray/BD’s Pop-up Menu or DVD’s
menu.
x[Audio]: Switches the language track when
multilingual tracks are recorded on Ultra
HD Blu-ray/BD/DVD. Selects the sound
track on CDs.
x[Subtitle]: Switches the subtitle language
when multilingual subtitles are recorded
on Ultra HD Blu-ray/BD/DVD.
x[Angle]: Switches to other viewing angles
when multi-angles are recorded on Ultra
HD Blu-ray/BD/DVD.
x[Number Entry]: Selects the number by
using </M/m/, key on the remote.
Photo only
x[Slideshow Speed]: Changes the
slideshow speed.
x[Slideshow Effect]: Sets the effect for
slideshows.
x[Slideshow BGM]*5:
– [Off]: Turns off the function.
– [My Music from USB]: Sets the music files
registered in [Add Slideshow BGM].
– [Play from Music CD]: Sets the tracks in
CD-DAs.
x[2D Playback]*6: Sets playback to 2D
image.
x[Change Display]: Switches between
[Grid View] and [List View].
x[View Image]: Displays the selected
photo.
x[Slideshow]: Plays a slideshow.
x[Rotate Left]: Rotates the photo
counterclockwise by 90 degrees.
x[Rotate Right]: Rotates the photo
clockwise by 90 degrees.
b
*1 [Repeat Setting] is not available during BDJ
titles playback or HDMV interactive title.
*2 [Bluetooth Output], [Bluetooth Device] and
[Bluetooth Volume] are not available during
Home Network photo playback.
*3 [HDR Conversion] is only available during
HDR video playback, when your display
device is not compatible with HDR display, or
when [HDR Output] in [Screen Settings] is set
to [Off].
*4 [Brighter Room] and [Theatre Room] are not
available during HDR video playback.
*5 [Slideshow BGM] is not available during
Home Network photo playback.
*6 [2D Playback] is only available during 3D
photo playback.
19
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
Settings and Adjustments
Settings and Adjustments
Using the Settings Displays
Select [Setup] on the home screen when
you need to change the settings of the
player.
The default settings are underlined.
1Select [Setup] on the home screen
using </M/m/,.
2Select the setup category icon using M/m,
and press ENTER.
[Software Update]
x[Update via Internet]
Updates the player’s software using available
network. Make sure that the network is
connected to the Internet. See “Step 2:
Network Connection” (page 12).
x[Update via USB Memory]
Updates the player’s software using USB
memory. Create a folder named “UPDATE”
and all the update files must be stored in this
folder. The player can recognise up to 500
files/folders in a single layer including the
update files/folders.
z
• We recommend performing the software
update every 2 months or so.
• If your network condition is poor, visit
www.sony.eu/support to download the latest
software version and update via USB memory.
You can also get information about update
functions from the website.
[Screen Settings]
x[HDR Output]
[Auto]: Outputs HDR signal depending on
contents and HDMI-SINK capability.
Conversion function is applied when content
is HDR and HDMI-SINK does not support HDR.
[Off]: Always output SDR.
x[Display Type]
[TV]: Select this when the player is connected
to TV.
[Projector]: Select this when the player is
connected to Projector.
z
[HDR Conversion] will be adjusted according to
the display type you select. Even though same
setting value of [HDR Conversion] is selected,
dynamic range of picture is different.
x[Output Video Resolution]
Normally select [Auto]. Select [Original
Resolution] to output the resolution recorded
on the disc. When the resolution is lower than
the SD resolution, it is scaled up to the SD
resolution.
x[24p Output]
Outputs 24p video signals only when you
connect a 24p-compatible TV via an HDMI
connection and the [Output Video
Resolution] is set to [Auto], [1080p] or [4K].
[Ultra HD Blu-ray/BD-ROM]
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[DVD-ROM]
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Data content]
This function is available for playback
contents stored in USB memory or data disc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
[Network content]
This function is available for playback
contents from other network, such as Home
Network, Screen mirroring, etc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.
20
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
x[4K Upscale Setting]
[Auto1]: Outputs 2K (1920 × 1080) video
signals during video playback and 4K video
signals during photo play when connecting
to a Sony 4K-compatible equipment.
Outputs 4K video signals when connecting to
a non-Sony 4K-compatible equipment.
This setting does not work for 3D video image
playback.
[Auto2]: Automatically outputs 4K video
signals when you connect a 4K-compatible
equipment.
[Off]: Turns off the function.
b
If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as [Auto2] setting.
x[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the connected
TV type, and switches to the matching colour
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.
x[HDMI Deep Colour Output]
[Auto]: Outputs 12bit/10bit video signals
when the connected TV is compatible with
Deep Colour.
[Off]: Select this when the picture is unstable
or colours appear unnatural.
x[IP Content NR]
[Auto] / [Strong] / [Medium] / [Mild]: Adjust
the picture quality for Internet content.
[Off]: Turns off the function.
x[3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all content in 2D or
to enjoy 4K output using 3D content.
x[TV Screen Size Setting for 3D]
Sets the screen size of your 3D-compatible
TV.
x[TV Type]
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide mode function.
x[Screen Format]
[Full]: Select this when connecting to a TV
with a wide mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
[Normal]: Changes the picture size to fit the
screen size with the original picture aspect
ratio.
x[DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with
black bands on the top and bottom.
[Pan & Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
x[Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the material is
video-based or film-based, and switches to
the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x[Pause Mode]
[Auto]: Normally select this. Dynamic moving
pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
[Audio Settings]
x[Digital Audio Output]
[Auto]: Normally select this. Outputs audio
signals according to the status of the
connected devices.
[PCM]: Outputs PCM signals from the
DIGITAL
OUT (COAXIAL)/
HDMI OUT jack. Select this if
there is no output from the connected device.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
21
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
Settings and Adjustments
x[DSD Output Mode]
[Auto]: Outputs DSD signal from HDMI OUT
jack when playing Super Audio CD & DSD
format file (if the connected device also
supports DSD).
Outputs LPCM signal from HDMI OUT jack
when playing Super Audio CD & DSD format
file (if the connected device does not support
DSD).
[Off]: Outputs PCM signals from HDMI OUT
jack when playing Super Audio CD and DSD
format file.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
x[BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output Bitstream (Dolby/DTS) signals
to an AV amplifier (receiver).
z
To enjoy Bitstream (Dolby/DTS) signals, set [BD
Audio MIX Setting] to [Off] and [Digital Audio
Output] to [Auto].
x[DTS Neo:6]
[Cinema]/[Music]: Outputs the simulated
multi-channel sound from 2 channel sources
via the HDMI OUT jack according to the
capability of the connected device using
[Cinema]/[Music] mode.
[Off]: Outputs the sound with its original
number of channels via the HDMI OUT jack.
b
When [DTS Neo:6] is set to [Cinema] or [Music],
[DSEE HX] cannot be set to [On].
x[48kHz/96kHz/192kHz PCM]
[48kHz]/[96kHz]/[192kHz]: Sets the sampling
frequency for the PCM signals output from
the DIGITAL OUT (COAXIAL) jack.
b
Some device does not support [96kHz] and
[192kHz] sampling frequency.
x[DSEE HX]
[On]: Upscales the audio file to a High-
Resolution Audio file and reproduces the
clear high-range sound which is often lost.
[Off]: Turns off the function.
b
Source must be 2ch and 44.1/48 kHz.
x[Audio DRC]
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
x[Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when connecting
an audio device that supports Dolby
Surround (Pro Logic) or DTS Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when connecting
an audio device that does not support Dolby
Surround (Pro Logic) or DTS Neo:6.
[Bluetooth Settings]
For “Listening to Audio through a Bluetooth®
Device”, see page 16.
x[Bluetooth Mode]
[On]: Enables Bluetooth settings and
functions.
[Off]: Disables Bluetooth settings and
functions.
x[Device List]
Displays a list of paired and detected
Bluetooth receivers when [Bluetooth Mode]
is set to [On].
22
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
x[Bluetooth Codec - AAC] / [Bluetooth
Codec - LDAC]
This function is enabled when [Bluetooth
Mode] is set to [On].
[On]: Enables AAC/LDAC codec.
[Off]: Disables AAC/LDAC codec.
b
This function is disabled during connection with
a Bluetooth device.
z
LDAC is an audio coding technology developed
by Sony that enables the transmission of High-
Resolution (Hi-Res) Audio content, even over a
Bluetooth connection. Unlike other Bluetooth
compatible coding technologies such as SBC, it
operates without any down-conversion of the
Hi-Res Audio content*, and allows
approximately three times more data** than
those other technologies to be transmitted over
a Bluetooth wireless network with
unprecedented sound quality, by means of
efficient coding and optimised packetization.
* Excluding DSD format contents.
** In comparison with SBC (Subband Coding)
when the bitrate of 990 kbps (96/48 kHz) or
909 kbps (88.2/44.1 kHz) is selected.
x[Wireless Playback Quality]
This function is enabled when [Bluetooth
Mode] and [Bluetooth Codec - LDAC] is set to
[On]. If video streaming via Wi-Fi is unstable,
please select [Connection] in below setting
and Wi-Fi connection will be stable.
[Auto]: Sets the transmission data rate for
LDAC automatically.
[Sound Quality]: The highest data rate is
used. It is recommended for listening to
music, but audio playback may become
unstable if the link quality is not sufficient.
[Standard]: A medium data rate is used. This
provides a balance between sound quality
and playback stability.
[Connection]: Stability is prioritised. The
sound quality may be reasonable and the
connection status will most likely be stable.
x[Bluetooth Output] (page 17)
[Bluetooth]: Outputs audio from Bluetooth
device.
[Bluetooth + HDMI]: Outputs audio from both
Bluetooth device and HDMI output.
[BD/DVD Viewing
Settings]
x[BD/DVD Menu Language]
Selects the default menu language for Ultra
HD Blu-ray/BD/DVD VIDEO.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x[Audio Language]
Selects the default audio language for Ultra
HD Blu-ray/BD/DVD VIDEO.
When you select [Original], the language
given priority in the disc is selected.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x[Subtitle Language]
Selects the default subtitle language for Ultra
HD Blu-ray/BD/DVD VIDEO.
Select [Select Language Code], and enter the
code for your language, referring to
“Language code list” (page 39).
x[BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x[BD Internet Connection]
[Allow]: Allows Internet connection from BD
contents.
[Do not allow]: Prohibits Internet connection
from BD contents.
x[Delete BD Data]
Deletes data in the USB memory.
All data stored in the buda folder will be
erased.
x[DVD-Audio Playback]
[DVD-Audio]: Plays DVD AUDIO content.
[DVD-Video]: Plays DVD VIDEO content only.
23
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
Settings and Adjustments
[Parental Control
Settings]
x[Password]
Sets or changes the password for the
Parental Control function. A password allows
you to set a restriction on Ultra HD Blu-ray/
BD/DVD VIDEO and Internet video playback.
If necessary, you can differentiate the
restriction levels for Ultra HD Blu-ray/BD/DVD
VIDEO and Internet videos.
x[Parental Control Area Code]
Playback of some Ultra HD Blu-ray/BD/DVD
VIDEO or Internet videos can be limited
according to the geographic area. Scenes
may be blocked or replaced with different
scenes. Follow the on-screen instructions and
enter your four-digit password.
x[BD Parental Control] /
[DVD Parental Control] /
[Internet Video Parental Control]
By setting Parental Control, scenes can be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter
your four-digit password.
x[Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated
Internet videos.
[Music Settings]
x[Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
[CD]: Plays the CD layer.
x[Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]: Plays the multi-channel area.
[System Settings]
x[OSD Language]
Selects on-screen display language for your
player.
x[HDMI Settings]
By connecting Sony components that are
compatible with HDMI functions with a High
Speed HDMI Cable, operation is simplified.
[Control for HDMI]
[On]: The following BRAVIA Sync features are
available:
–One-Touch Play
–System Power-Off
– Language Follow
[Off]: Turns off the function.
z
For details, refer to the instruction manual
supplied with the TV or components. To enable
the BRAVIA Sync features, connect your TV via
the HDMI OUT 1 jack.
[Linked to TV-off]
[Valid]: Automatically turns off the player
when the connected TV enters standby mode
(BRAVIA Sync).
[Invalid]: Turns off the function.
x[HDMI Audio Output]
[Auto]: Outputs audio signal via HDMI OUT 2
jack if it is connected to a device and the
device is turned on. Otherwise, outputs audio
signal via HDMI OUT 1 jack.
[HDMI1]: Outputs audio signal via HDMI OUT 1
jack.
[HDMI2]: Outputs audio signal via HDMI OUT
2 jack.
x[Auto Standby]
[On]: Automatically returns to standby mode
if no button is pressed for more than
20 minutes.
[Off]: Turns off the function.
b
During SongPal Link operation, [Auto Standby] is
disabled even when the value is set to [On].
24
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
x[Auto Display]
[On]: Automatically displays information on
the screen when changing the viewing titles,
picture modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x[Software Update Notification]
[On]: Sets the player to inform you of newer
software version information (page 19).
[Off]: Turns off the function.
x[Gracenote Settings]
[Auto]: Automatically downloads audio CD
(CD-DA) disc information before audio CD
(CD-DA) disc playback after audio CD (CD-DA)
disc recognition. Connect to the network for
downloading.
[Manual]: Downloads the disc information
when [Music Search] is selected.
x[Device Name]
Displays the player’s name. The player’s
name can be changed.
x[System Information]
Displays the player’s software version
information and the MAC address.
x[Software License Information]
Displays information about the Software
License.
[Network Settings]
x[Internet Settings]
Connect the player to the network
beforehand. For details, see “Step 2: Network
Connection” (page 12).
[Wired Setup]: Select this when you connect
to a broadband router using a LAN cable.
[Wireless Setup]: Select this when you use
the wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
www.sony.eu/support
x[Network Connection Status]
Displays the current network status.
x[Network Connection Diagnostics]
Checks for the proper network connection by
running the network diagnostics.
x[Screen mirroring RF Setting]
[Auto]: Sets the RF (Radio Frequency) channel
band automatically for Screen mirroring
connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/CH 6/CH 11 as
priority.
x[Connection Server Settings]
Sets whether or not to display the connected
server.
x[Auto Home Network Access Permission]
[On]: Allows automatic access from newly
detected Home Network controller-
compatible product.
[Off]: Turns off the function.
x[Home Network Access Control]
Displays a list of Home Network controller-
compatible products and sets whether or not
to accept commands from the controllers in
the list.
x[Registered Remote Devices]
Displays a list of your registered remote
devices.
x[Remote Start]
[On]: Allows you to turn on the player by a
device linked via a network.
[Off]: Turns off the function.
b
Set [Remote Start] to [On] and turn off the
player to activate Network standby (page 34).
[Easy Setup]
See “Step 3: Easy Setup” (page 13).
25
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\060ADD.fm
Settings and Adjustments
[Resetting]
x[Reset to Factory Default Settings]
Resets the player settings to the factory
default by selecting the group of settings. All
the settings within the group will be reset.
x[Initialise Personal Information]
Erases your personal information stored in
the player.
b
If you dispose, transfer or resell this unit, please
delete all Personal Information for security
purposes. Please take the appropriate measures
such as logging out after using a network
service.
26
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
Troubleshooting
If a problem occurs while operating the
player, use this troubleshooting guide to help
remedy the problem before requesting
repairs. If the problem persists, consult your
nearest Sony dealer.
No picture or the picture is not output
correctly.
• Check that all the cables are securely
connected (page 10).
• Switch the input selector on your TV to
display the signal from the player.
• Reset the [Output Video Resolution] to the
lowest resolution by pressing x(stop),
HOME, and then POP UP/MENU button on
the remote.
• Try the following: 1Turn the player off and
on again. 2Turn the connected equipment
off and on again. 3Disconnect and then
reconnect the HDMI cable.
• The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
• Check the [Output Video Resolution]
settings in [Screen Settings] (page 19).
• For Ultra HD Blu-ray/BD-ROM/DVD-ROM/
Data content/Network content, check the
[24p Output] settings in [Screen Settings]
(page 19).
• For 4K output, please make sure that the
player is connected to 4K display that
supports HDCP2.2 capable HDMI input
using Premium High Speed HDMI Cable or
High Speed HDMI Cable that supports 18
Gbps bandwidth (page 10).
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
• When [Control for HDMI] in [HDMI Settings]
is set to [On] (page 23), the display
language on the screen automatically
switches according to the language setting
of the connected TV (if you change the
setting on your TV, etc.).
No sound or the sound is not output
correctly.
• Check that all the cables are securely
connected (page 11).
• Switch the input selector on your AV
amplifier (receiver) so that the audio signals
of the player are output from your AV
amplifier (receiver).
• If the audio signal does not come through
the DIGITAL OUT (COAXIAL)/HDMI OUT jack,
check the audio settings (page 20).
• For HDMI connections, try the following:
1Turn the player off and on again. 2Turn
the connected equipment off and on again.
3Disconnect and then reconnect the HDMI
cable.
• For HDMI connections, if the player is
connected to a TV through an AV amplifier
(receiver), try connecting the HDMI cable
directly to the TV. Refer also to the
instruction manual supplied with the AV
amplifier (receiver).
• The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
• The device connected to the HDMI OUT jack
does not support the audio format of the
player. Check the audio settings (page 20).
• Check the [HDMI Audio Output] settings in
[System Settings] (page 23).
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
DTS-HD Master Audio, Dolby Atmos and
DTS:X) is not output by bitstream.
• Set [BD Audio MIX Setting] in [Audio
Settings] to [Off] (page 21).
• Check that the AV amplifier (receiver) is
compatible with each HD Audio format.
The interactive audio is not output.
• Set [BD Audio MIX Setting] in [Audio
Settings] to [On] (page 21).
Picture
Sound
27
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
Message Code 3 [Audio outputs
temporarily muted. Do not adjust the
playback volume. The content being
played is protected by Cinavia and is not
authorized for playback on this device. For
more information, see
http://www.cinavia.com. Message Code
3.] appears on the screen when playing a
disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating
that it is an unauthorised copy of
professionally-produced content (page 36).
The disc does not play.
• The disc is dirty or skewed.
• The disc is upside down. Insert the disc with
the playback side facing down.
• The disc has a format that cannot be played
back by this player (page 29).
• The player cannot play a recorded disc that
is not correctly finalised.
• The region code on the BD/DVD does not
match the player.
The player does not detect a USB device
connected to the player.
• Make sure that the USB device is securely
connected to the USB jack.
• Check if the USB device or a cable is
damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
The picture/sound is poor/certain
programmes display a loss of detail,
especially during fast-motion or dark
scenes.
• Picture/sound quality may be improved by
changing the connection speed.
Recommended connection speed is of at
least 2.5 Mbps for standard definition video,
10 Mbps for high definition video and at
least 25 Mbps for Ultra HD video (depending
on the service provider).
Internet streaming via Wi-Fi is unstable
when connected with Bluetooth device
using LDAC.
• Set [Wireless Playback Quality] in [Bluetooth
Settings] to [Connection] (page 22).
There is no options menu during Internet
streaming.
• Options menu is not available during
Internet streaming.
The player cannot connect to the network.
• Check the network connection (page 12)
and the network settings (page 24).
The PC cannot connect to the Internet after
[Wi-Fi Protected Setup™ (WPS)] is
performed.
• The wireless settings of the router may
change automatically if you use the Wi-Fi
Protected Setup function before adjusting
the settings of the router. In this case,
change the wireless settings of your PC
accordingly.
You cannot connect the player to the
wireless LAN router.
• Check if the wireless LAN router is on.
• Move the player and the wireless LAN router
closer to each other.
• Move the player away from devices that use
a 2.4 GHz frequency band such as a
microwave, Bluetooth or digital cordless
device, or turn off such devices.
The desired wireless router do not appear
in the wireless network list.
• Press RETURN to return to the previous
screen, and try wireless setup again. If the
desired wireless router is still not detected,
select [New connection registration] to
perform [Manual registration].
The message [A new software version is
available. Please go to the “Setup” section
of the menu and select “Software Update”
to perform the update.] appears on the
screen when turning the player on.
• See [Software Update] (page 19) to update
the player to a newer software version.
Disc
USB device
Internet streaming
Network connection
28
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Bluetooth connection cannot be done/
completed.
• Set [Bluetooth Mode] to [On] (page 21).
• Make sure the Bluetooth device is turned on
and the Bluetooth function is enabled.
• Move the Bluetooth device closer to the
player.
• Connect the player and the Bluetooth
device again. You may need to cancel the
connection with the player using your
Bluetooth device first.
• Delete pairing information once from the
device list and connected device, before
retrying connection.
• Connection may not be possible if other
Bluetooth devices are present around the
player. In this case, turn off the other
Bluetooth devices.
• The connection registration information has
been erased. Perform the connection
operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
• DVD AUDIO cannot be played via Bluetooth
device due to DRM.
• Move the Bluetooth device closer to the
player.
• Make sure the player is not receiving any
interference from a Wi-Fi network, other
Bluetooth device, other 2.4 GHz wireless
device, or microwave oven.
• Check that the Bluetooth connection is
properly made between the player and the
Bluetooth device.
• Connect the player and the Bluetooth
device again.
• Keep the player away from metal objects or
surfaces.
The [Control for HDMI] function does not
work (BRAVIA Sync).
• Check that your TV is connected via the
HDMI OUT 1 jack.
• Check that [Control for HDMI] in [HDMI
Settings] is set to [On] (page 23).
• If you change the HDMI connection, turn the
player off and on again.
• If power failure occurs, set [Control for
HDMI] in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to [On]
(page 23).
• Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for HDMI]
function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
• When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the mains
lead, or a power failure occurs, try the
following: 1Switch the input selector
of the AV amplifier (receiver) so that
the picture from the player appears on
the TV screen. 2Set [Control for HDMI]
in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to
[On] (page 23). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
The System Power-Off function does not
work (BRAVIA Sync).
• Check that [Control for HDMI] and [Linked to
TV-off] in [HDMI Settings] are set to [On] and
[Valid] (page 23).
Bluetooth connection Control for HDMI (BRAVIA Sync)
29
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
Playback does not start from the beginning
of content.
• Press OPTIONS, and select [Play from start].
Playback does not start from the resume
point where you last stopped playing.
• The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped. The
content being played is protected by
Cinavia and is not authorized for playback
on this device. For more information, see
http://www.cinavia.com. Message Code
1.] appears on the screen when playing a
disc.
• The audio track of the video that you are
playing contains a Cinavia code indicating it
was intended for presentation using
professional equipment only and is not
authorised for playback by consumers
(page 36).
The disc tray does not open and you cannot
remove the disc even after you press Z
(open/close).
• While the player is turned on, press x
(stop), HOME, and then TOP MENU button
on the remote to unlock the tray and disable
the Child Lock (page 9).
• Try the following: 1Turn the player off, and
disconnect the AC power cord. 2Reconnect
the AC power cord while pressing down
Z (open/close) on the player. 3Keep
pressing down Z (open/close) on the
player until the tray opens. 4Remove the
disc.
The message [[EJECT] Key is currently
unavailable.] appears on the screen after
Z (open/close) is pressed.
• Contact your nearest Sony dealer or local
authorised Sony service facility.
The player does not respond to any button.
• Moisture has condensed inside the player
(page 4).
Playable discs
*1 Since the Blu-ray Disc specifications are new
and evolving, some discs may not be playable
depending on the disc type and the version.
The audio output differs depending on the
source, connected output jack, and selected
audio settings.
*2 BD-RE: Ver.2.1, BD-R: Ver.1.1, 1.2, 1.3 including
organic pigment type BD-R (LTH type). The
BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
*3 A CD or DVD disc will not play if it has not been
correctly finalised. For more information, refer
to the instruction manual supplied with the
recording device.
*4 Some DVD AUDIO discs have hidden group
and need password entry. Refer to the disc for
the password.
Discs that cannot be played
• BDs with cartridge
•BDXLs
•DVD-RAMs
• HD DVDs
•PHOTO CDs
• Data part of CD-Extras
•Super VCDs
• Audio material side on DualDiscs
Note on Discs
This product is designed to playback discs
that conform to the Compact Disc (CD)
standard. DualDiscs and some of the music
discs encoded with copyright protection
technologies do not conform to the Compact
Disc (CD) standard, therefore, these discs
may not be playable by this product.
Others
Blu-ray
Disc*1
Ultra HD Blu-ray, BD-ROM,
BD-R*2/BD-RE*2
DVD*3 DVD-ROM, DVD-R/
DVD-RW, DVD+R/DVD+RW,
DVD AUDIO*4
CD*3 CD-DA (Music CD),
CD-ROM, CD-R/CD-RW,
Super Audio CD
30
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Note on playback operations of Ultra HD
Blu-ray/BD/DVD
Some playback operations of Ultra HD
Blu-ray/BD/DVD may be intentionally set by
software producers. Since this player plays
Ultra HD Blu-ray/BD/DVD according to the
disc contents the software producers
designed, some playback features may not
be available.
Note about double-layer Ultra HD Blu-ray/BD/
DVD and triple-layer Ultra HD Blu-ray
The playback pictures and sound may be
momentarily interrupted when the layers
switch.
Region code (BD/DVD VIDEO only)
Your player has a region code printed on the
rear of the unit and will only play BD/DVD
VIDEO labeled with identical region codes or
.
ALL
31
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
Playable types of files
Video
Codec Container Extension With Audio
MPEG-1 Video*1 PS .mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
MPEG-2 Video*2
PS*3 .mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
TS*4 .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
MKV*1 .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
Xvid AVI .avi Dolby Digital, LPCM, WMA9, MP3
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
MPEG4/AVC/
H.264*5
MKV*1 .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
MP4*1 .mp4, .m4v AAC
TS*1 .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
Quick Time*6 .mov Dolby Digital, LPCM, AAC, MP3
FLV*6 .flv, .f4v LPCM, AAC, MP3
3gpp/3gpp2*6 .3gp, .3g2,
.3gpp, .3gp2 AAC
VC1*1 TS .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
WMV9*1*7 ASF .wmv, .asf WMA9, WMA 10 Pro
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
Motion JPEG*6 Quick Time .mov Dolby Digital, LPCM, AAC, MP3
AVI .avi Dolby Digital, LPCM, AAC, MP3
HEVC/H.265
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
MP4 .mp4, .m4v AAC
TS .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
VP6 FLV .flv MP3
VP8/VP9 Webm .webm Vorbis
MKV .mkv Dolby Digital, LPCM, AAC, MP3, Vorbis
Format
AVCHD (Ver.2.0)*1*8*9*10
32
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Music
Photo
*1 The player may not play this file format on a
Home Network server.
*2 The player can only play standard definition
video on a Home Network server.
*3 The player does not play DTS format files on
a Home Network server.
*4 The player can only play Dolby Digital format
files on a Home Network server.
*5 The player can support AVC up to Level 4.1.
*6 The player does not play this file format on a
Home Network server.
*7 The player can support WMV9 up to Advance
Profile.
*8 The player can support frame rate up to
60 fps.
*9 The player plays AVCHD format files that are
recorded on a digital video camera, etc. The
AVCHD format disc will not play if it has not
been correctly finalised.
*10 The player can play AVCHD 3D format.
*11 The player can play “.mka” files.
This file cannot be played on a Home
Network server.
*12 The player does not play coded file such as
Lossless.
*13 The player does not play DST encoded files.
*14 The player does not play animated PNG or
animated GIF files.
*15 For MPO files other than 3D, the key image or
the first image is displayed.
*16 The player does not support 16bit BMP files.
b
• Some files may not play depending on the file
format, file encoding, recording condition, or
Home Network server condition.
• Some files edited on a PC may not play.
• Some files may not be able to perform fast
forward or fast reverse function.
• The player does not play coded files such as
DRM.
• The player can recognise the following files or
folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 9th layer, including the
root folder.
– up to 500 files/folders in a single layer.
• The player can recognise the following files or
folders stored in the Home Network server:
– up to folders in the 19th layer.
– up to 999 files/folders in a single layer.
• The player can support frame rate:
– up to 60 fps for AVCHD (MPEG4/AVC) only.
– up to 30 fps for other video codecs.
• The player can support video bit rate up to
40 Mbps.
• Some USB devices may not work with this
player.
• The player can recognise Mass Storage Class
(MSC) devices (such as flash memory or an
HDD), Still Image Capture Device (SICD) class
devices and 101 keyboard.
• To avoid data corruption or damage to the USB
memory or devices, turn off the player when
connecting or removing the USB memory or
devices.
• The player may not play high bit rate video and
audio files on DATA CDs smoothly. It is
recommended to play such files using DATA
DVDs or DATA BDs.
Codec Extension
MP3 (MPEG-1 Audio Layer
III)*11 .mp3
AAC/HE-AAC*1*11 .m4a, .aac*6
WMA9 Standard*1 .wma
WMA 10 Pro*12 .wma
LPCM*11 .wav
FLAC*1 .flac, .fla
Dolby Digital*6*11 .ac3
DSF*1 .dsf
DSDIFF*1*13 .dff
AIFF*1 .aiff, .aif
ALAC*1 .m4a
Vorbis .ogg
Monkey’s Audio .ape
Format Extension
JPEG .jpeg, .jpg,
.jpe
PNG .webp*14
GIF .gif*14
MPO .mpo*6*15
BMP .bmp*6*16
WEBP .webp
33
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
Specifications
Specifications and design are subject to change without notice.
System
Inputs and outputs
Wireless
Bluetooth
Laser Semiconductor laser
Jack name Jack type/Output level/Load impedance
DIGITAL OUT (COAXIAL) Phono jack /0.5 Vp-p/75 ohms
HDMI OUT 1*/2
HDMI 19-pin standard connector
* Only HDMI OUT 1 supports video output.
LAN (100) 100BASE-TX Terminal
USB
USB jack Type A (For connecting a USB memory, memory
card reader, digital still camera, and digital video camera)*
* Do not use for power charging purposes.
Wireless LAN standard Protocol IEEE802.11a/b/g/n
Frequency range 2.4 GHz, 5 GHz band
Modulation DSSS and OFDM
Bluetooth Version Bluetooth Specification v4.1
Communication system Bluetooth Specification v4.1
Output Bluetooth Specification Power Class 1
Maximum communication
range Line of sight approx. 30 m
Frequency band 2.4 GHz
Modulation method FHSS
Compatible Bluetooth Profiles A2DP v1.2, AVRCP v1.3
Supported Codecs SBC, AAC, LDAC
Transmission range (A2DP)
• 20 Hz - 40,000 Hz (LDAC in sampling 96 kHz and transmit
by 990 kbps)
• 20 Hz - 20,000 Hz (in sampling 44.1 kHz)
34
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
General
Power requirements Rating: Input 220 V - 240 V AC, 50/60 Hz
Power consumption 15 W
Network standby Less than 2 W (all wired/wireless network ports ON)
Dimensions (approx.) 430 mm × 265 mm × 50 mm
(width × depth × height) incl. projecting parts
Mass (approx.) 3.8 kg
Operating temperature 5 ºC to 35 ºC
Operating humidity 25 % to 80 %
35
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
• Java is a trademark of Oracle and/or its
affiliates.
• Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered
trademarks, and DTS-HD Master Audio is a
trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
• The terms HDMI®, HDMI High-Definition
Multimedia Interface, Premium High Speed
HDMI Cable, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other
countries.
• Blu-ray Disc™, Blu-ray™, BD-LIVE™,
BONUSVIEW™ and Ultra HD Blu-ray™ word
marks and the logos are trademarks of the
Blu-ray Disc Association.
• Blu-ray 3D™ and Blu-ray 3D™ logo are
trademarks of the Blu-ray Disc Association.
• “DVD Logo” is a trademark of DVD Format/
Logo Licensing Corporation.
• “DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”,
“DVD VIDEO”, “DVD AUDIO”, “Super Audio CD”
and “CD” logos are trademarks.
• “BRAVIA” is a trademark of Sony Corporation.
• MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
• This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as
copyright and trade secret protection for
certain aspects of such technology. Cinavia is a
trademark of Verance Corporation. Copyright
2004-2010 Verance Corporation. All rights
reserved by Verance. Reverse engineering or
disassembly is prohibited.
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use
or distribution of such technology outside of
this product is prohibited without a license
from Microsoft or an authorized Microsoft
subsidiary.
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady-protected
content and/or WMDRM-protected content. If
the device fails to properly enforce restrictions
on content usage, content owners may require
Microsoft to revoke the device’s ability to
consume PlayReady-protected content.
Revocation should not affect unprotected
content or content protected by other content
access technologies. Content owners may
require you to upgrade PlayReady to access
their content. If you decline an upgrade, you
will not be able to access content that requires
the upgrade.
• Gracenote, the Gracenote logo and logotype,
the “Powered by Gracenote” logo, and
Gracenote MusicID are either registered
trademarks or trademarks of Gracenote, Inc. in
the United States and/or other countries.
• Wi-Fi®, Wi-Fi Protected Access®, Wi-Fi
Alliance® and Miracast® are registered
trademarks of Wi-Fi Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™ , Wi-Fi
Protected Setup™ and Wi-Fi CERTIFIED
Miracast™ are trademarks of Wi-Fi Alliance.
• The Wi-Fi CERTIFIED Logo is a certification
mark of Wi-Fi Alliance.
• The Wi-Fi Protected Setup Identifier Mark is a
certification mark of the Wi-Fi Alliance.
Copyrights and Trademarks
36
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
• LDAC™ and LDAC logo are trademarks of Sony
Corporation.
• “DSEE HX” is a trademark of Sony Corporation.
• SongPal Link and SongPal Link logo are
trademarks of Sony Corporation.
• Google Play™ and the Google Play logo are
trademarks of Google Inc.
• Apple and the Apple logo, are trademarks of
Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple
Inc.
• This product incorporates Spotify software
which is subject to 3rd party licenses found
here*:
https://developer.spotify.com/esdk-third-
party-licenses/
Spotify and Spotify logos are trademarks of the
Spotify Group.*
* This function may not be available in some
countries/regions.
•Opera
® Devices SDK. Copyright 1995-2016
Opera TV AS. All rights reserved.
• All other trademarks are trademarks of their
respective owners.
• Other system and product names are generally
trademarks or registered trademarks of the
manufacturers. ™ and ® marks are not
indicated in this document.
Copy Protection
Please be advised of the advanced content
protection systems used in Ultra HD Blu-ray™,
Blu-ray Disc™ and DVD media. These systems,
called AACS (Advanced Access Content System)
and CSS (Content Scramble System), may
contain some restrictions on playback, analog
output, and other similar features. The operation
of this product and the restrictions placed may
vary depending on the date of purchase, as the
governing board of the AACS may adopt or
change its restriction rules after the time of
purchase.
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some
commercially-produced film and videos and their
soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be
displayed and playback or copying will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
Gracenote® End User License Agreement
This application or device contains software
from Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application
to perform disc and/or file identification and
obtain music-related information, including
name, artist, track, and title information
(“Gracenote Data”) from online servers or
embedded databases (collectively, “Gracenote
Servers”) and to perform other functions. You
may use Gracenote Data only by means of the
intended End-User functions of this application
or device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only.
You agree not to assign, copy, transfer or
transmit the Gracenote Software or any
Gracenote Data to any third party. YOU AGREE
NOT TO USE OR EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR GRACENOTE
SERVERS, EXCEPT AS EXPRESSLY PERMITTED
HEREIN.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software,
and Gracenote Servers will terminate if you
violate these restrictions. If your license
terminates, you agree to cease any and all use of
the Gracenote Data, the Gracenote Software,
and Gracenote Servers. Gracenote reserves all
rights in Gracenote Data, the Gracenote
Software, and the Gracenote Servers, including
all ownership rights. Under no circumstances
will Gracenote become liable for any payment to
you for any information that you provide. You
agree that Gracenote, Inc. may enforce its rights
37
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
under this Agreement against you directly in its
own name.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The
purpose of a randomly assigned numeric
identifier is to allow the Gracenote service to
count queries without knowing anything about
who you are. For more information, see the web
page for the Gracenote Privacy Policy for the
Gracenote service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or
warranties, express or implied, regarding the
accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right
to delete data from the Gracenote Servers or to
change data categories for any cause that
Gracenote deems sufficient. No warranty is
made that the Gracenote Software or Gracenote
Servers are error-free or that functioning of
Gracenote Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional
data types or categories that Gracenote may
provide in the future and is free to discontinue
its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT.
GRACENOTE DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR USE OF THE
GRACENOTE SOFTWARE OR ANY GRACENOTE
SERVER. IN NO CASE WILL GRACENOTE BE LIABLE
FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© 2000 - present. Gracenote, Inc. All Rights
Reserved.
Software License Information
For EULA (End User License Agreement), please
refer to [License agreement] in the option menu
on each network service icon.
For details of the other software licenses, please
select [Setup] and refer to [Software License
Information] in [System Settings].
This product contains software that is subject to
the GNU General Public License (“GPL”) or GNU
Lesser General Public License (“LGPL”). These
licenses establish that customers have the right
to acquire, modify, and redistribute the source
code of said software in accordance with the
terms of the GPL or the LGPL.
The source code for the software used in this
product is subject to the GPL and LGPL, and is
available on the Web. To download, please visit
the following website:
http://oss.sony.net/Products/Linux
Please note that Sony cannot respond to any
inquiries regarding the content of this source
code.
Disclaimer regarding services offered by third
parties
Services offered by third parties may be
changed, suspended, or terminated without
prior notice. Sony does not bear any
responsibility in these sorts of situations.
38
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
communication, this player supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your wireless
network, even without any sophisticated
tools. Keep in mind that there is a risk of
unauthorised access or interception of data.
WEP
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your
wireless network. WEP is a legacy security
technology that enables older devices, which
do not support TKIP/AES, to be connected.
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed to
correct the deficiencies of WEP. TKIP assures
a higher security level than WEP.
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct
from WEP and TKIP.
AES assures a higher security level than WEP
or TKIP.
• To keep the disc clean,
handle the disc by its
edge. Do not touch the
surface. Dust, fingerprints,
or scratches on the disc
may cause it to
malfunction.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a
cleaning cloth. Wipe the disc
from the center out.
• Do not use solvents such as
benzine, thinner,
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the
label before playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-standard shape
(e.g., card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
• Do not resurface the playing side of a disc to
remove surface scratches.
About wireless LAN security Notes About the Discs
39
UBP-X800
4-687-310-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
Additional Information
For details, see [BD/DVD Viewing Settings]
(page 22).
The language spellings conform to the ISO
639: 1988 (E/F) standard.
Language code list
Code Language
1027 Afar 1028 Abkhazian
1032 Afrikaans 1039 Amharic
1044 Arabic 1045 Assamese
1051 Aymara 1052 Azerbaijani
1053 Bashkir 1057 Byelorussian
1059 Bulgarian 1060 Bihari
1061 Bislama 1066 Bengali
1067 Tibetan 1070 Breton
1079 Catalan 1093 Corsican
1097 Czech 1103 Welsh
1105 Danish 1109 German
1130 Bhutani;
Dzongkha
1142 Greek
1144 English 1145 Esperanto
1149 Spanish 1150 Estonian
1151 Basque 1157 Persian
1165 Finnish 1166 Fiji
1171 Faroese 1174 French
1181 Frisian 1183 Irish
1186 Scots Gaelic 1194 Galician
1196 Guarani 1203 Gujarati
1209 Hausa 1217 Hindi
1226 Croatian 1229 Hungarian
1233 Armenian 1235 Interlingua
1239 Interlingue 1245 Inupiak
1248 Indonesian 1253 Icelandic
1254 Italian 1257 Hebrew
1261 Japanese 1269 Yiddish
1283 Javanese 1287 Georgian
1297 Kazakh 1298 Greenlandic;
Kalaallisut
1299 Cambodian;
Khmer
1300 Kannada
1301 Korean 1305 Kashmiri
1307 Kurdish 1311 Kirghiz
1313 Latin 1326 Lingala
1327 Laothian; Lao 1332 Lithuanian
1334 Latvian 1345 Malagasy
1347 Maori 1349 Macedonian
1350 Malayalam 1352 Mongolian
1353 Moldavian 1356 Marathi
1357 Malay 1358 Malese;
Maltese
1363 Burmese 1365 Nauru
1369 Nepali 1376 Dutch
1379 Norwegian 1393 Occitan
1403 Oromo 1408 Oriya
1417 Punjabi;
Panjabi
1428 Polish
1435 Pashto; Pushto 1436 Portuguese
1463 Quechua 1481 Rhaeto-
Romance
1482 Kirundi; Rundi 1483 Romanian
1489 Russian 1491 Kinyarwanda
1495 Sanskrit 1498 Sindhi
1501 Sangho; Sango 1502 Serbo-Croatian
1503 Singhalese;
Sinhalese
1505 Slovak
1506 Slovenian 1507 Samoan
1508 Shona 1509 Somali
1511 Albanian 1512 Serbian
1513 Siswati; Swati 1514 Sesotho; Sotho
southern
1515 Sundanese 1516 Swedish
1517 Swahili 1521 Tamil
1525 Telugu 1527 Tajik
1528 Thai 1529 Tigrinya
1531 Turkmen 1532 Tagalog
1534 Setswana;
Tswana
1535 Tonga; Tonga
islands
1538 Turkish 1539 Tsonga
1540 Tatar 1543 Twi
1557 Ukrainian 1564 Urdu
1572 Uzbek 1581 Vietnamese
1587 Volapük 1613 Wolof
1632 Xhosa 1665 Yoruba
1684 Chinese 1697 Zulu
1703 Not specified
Code Language
40
UBP-X800
4-687-310-11(1)
master page=left
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070ADD.fm
For details, see [Parental Control Area Code]
(page 23).
Parental control/area code
Code Area
2044 Argentina 2047 Australia
2046 Austria 2057 Belgium
2070 Brazil 2090 Chile
2092 China 2093 Colombia
2115 Denmark 2165 Finland
2174 France 2109 Germany
2200 Greece 2219 Hong Kong
2248 India 2238 Indonesia
2239 Ireland 2254 Italy
2276 Japan 2304 Korea
2333 Luxembourg 2363 Malaysia
2362 Mexico 2376 Netherlands
2390 New Zealand 2379 Norway
2427 Pakistan 2424 Philippines
2428 Poland 2436 Portugal
2489 Russia 2501 Singapore
2149 Spain 2499 Sweden
2086 Switzerland 2543 Taiwan
2528 Thailand 2184 United
Kingdom
2586 Vietnam
D:\JOB\SONY
DVD\2016\SD160015\4687310111_GB\070BC
O.fm
master page=left
UBP-X800
4-687-310-11(1)
http://www.sony.net/
© 2017 Sony Corporation Printed in Malaysia I-468731011%
4-687-310-11(1)
Record the serial number (S/N) in the space provided below. Provide this number to your Sony
dealer to get quicker action whenever you call them regarding this product.
S/N _____________________________
Model Name: UBP-X800
zTo find out useful hints, tips and information about Sony products and services
please visit: www.sony.eu/myproducts/