Table of Contents
- Table of Contents
- Overview
- Preparation
- Projecting/Adjusting an Image
- Adjustments and Settings Using a Menu
- Network
- Using Network Features
- Displaying the Control Window of the Projector with a Web Browser
- Confirming the Information regarding the Projector
- Operating the Projector from a Computer
- Using the e-mail report Function
- Setting the LAN Network of the projector
- Setting the WLAN Network of the projector
- Setting the Custom Labels for the Input Terminals of the Projector
- Setting the Control Protocol of the Projector
- Using Network Features
- Presentation Function via Network
- Playing Video and Audio using USB Connection
- USB Media Viewer
- Others
Sony VPL-SX226 User Manual
Displayed below is the user manual for VPL-SX226 by Sony which is a product in the Data Projectors category. This manual has pages.
Related Manuals
4-487-299-15 (1)
© 2014 Sony Corporation
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-SW235/SW225
VPL-SX236/SX235/SX226/SX225
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
2Table of Contents
Table of Contents
Overview
Location and Function of Controls .... 4
Main Unit .....................................4
Terminals ......................................5
Remote Commander and Control
Panel Keys ................................. 6
Preparation
Connecting the Projector ................... 8
Connecting a Computer ................8
Connecting a Video
equipment ................................ 10
Connecting a microphone .......... 12
Connecting a USB memory
device ...................................... 12
Connecting an External Monitor and
Audio Equipment ....................12
Projecting/Adjusting an
Image
Projecting an Image ......................... 13
Adjusting the Projected image ... 14
Turning Off the Power ................17
Adjustments and Settings
Using a Menu
Using a MENU ................................18
The Picture Menu .............................19
The Screen Menu .............................20
The Function Menu .......................... 24
The Operation Menu ........................ 25
The Connection/Power Menu ..........26
The Installation Menu ...................... 28
The Information Menu .....................29
Network
Using Network Features ...................30
Displaying the Control Window of
the Projector with a Web
Browser ...................................30
Confirming the Information
regarding the Projector ............31
Operating the Projector from a
Computer .................................32
Using the e-mail report
Function ...................................32
Setting the LAN Network of the
projector ..................................33
Setting the WLAN Network of the
projector ..................................33
Setting the Custom Labels for the
Input Terminals of the
Projector ..................................36
Setting the Control Protocol of the
Projector ..................................36
Presentation Function via
Network
Using Presentation Function via
Network .........................................40
Installing Projector Station for
Network Presentation ..............40
Starting Projector Station for
Network Presentation ..............40
Projecting an Image ....................41
Connection Settings ....................42
Using the Controller ...................42
3
Table of Contents
Playing Video and Audio
using USB Connection
Playing Video and Audio using USB
Connection ....................................44
Starting USB Display .................44
Playing Video and Audio ...........44
Using the Controller ...................44
USB Media Viewer
Using USB Media Viewer ................46
Thumbnail Mode ........................47
Option Menu ...............................47
Display Mode .............................48
Option Menu ...............................48
Slideshow Mode .........................48
Option Menu ...............................49
Others
Indicators ..........................................50
Messages List ...................................51
Troubleshooting ...............................52
Replacing the Lamp .........................54
Cleaning the Air Filter .....................56
Specifications ...................................57
Projection Distance ..........................64
Dimensions .......................................70
END USER LICENSE
AGREEMENT ..............................72
Index .................................................78
4Location and Function of Controls
BOverview
Location and Function of Controls
aLens
bRemote control receiver
cFront feet (adjustable) (page 15)
dFoot adjust button (page 15)
eSpeaker
fVentilation holes (exhaust)
gLamp cover (page 54)
hAir filter cover/Ventilation holes
(intake) (page 56)
Do not place anything near the ventilation
holes as this may cause internal heat
buildup. Do not place your hand near the
ventilation holes and the circumference as
this may cause injury.
iLAMP/COVER indicator
(page 50)
jON/STANDBY indicator
(page 50)
kTerminals (page 5)
lSecurity bar
Connects to a commercially available
security chain or wire.
mSecurity lock
Connects to an optional security cable
manufactured by Kensington.
For details, visit Kensington’s web site.
http://www.kensington.com/
nControl panel keys (page 6)
oFocus ring (page 14)
Main Unit
21
4
3
8
6
5
3
4
7
qf
qg
qs
qa
0
9
qd
Caution
5
Location and Function of Controls
Overview
Input (pages 8, 10)
aINPUT A
Video: RGB/YPBPR input terminal
(RGB/YPBPR)
Audio: Audio input terminal (AUDIO)
bINPUT B
Video: RGB input terminal (RGB)
Audio: Audio input terminal (AUDIO)
cINPUT C
Video: HDMI input terminal (HDMI)
Audio: HDMI input terminal (HDMI)
dS VIDEO (S VIDEO IN)
Video: S video input terminal
(S VIDEO IN)
Audio: Audio input terminal
(L (MONO) AUDIO/R)
eVIDEO (VIDEO IN)
Video: Video input terminal (VIDEO)
Audio: Audio input terminal
(L (MONO) AUDIO/R)
The audio inputs of S VIDEO and VIDEO are
shared.
Output (page 12)
fOUTPUT
Video: Monitor output terminal
(MONITOR)
Audio: Audio output terminal (AUDIO)
This terminal outputs the projected image only
when INPUT A or INPUT B is used.
Others
gRS-232C terminal (RS-232C)
RS-232C compatible control terminal.
Connects the computer’s RS-232C
terminal and the RS-232C cross cables.
hLAN terminal (page 30)
iAC IN () socket
Connects the supplied AC power cord.
jUSB terminal (Type A) ( )
(pages 12, 46)
kUSB terminal (Type B) ( )
(page 44)
lMicrophone input ( )
Terminals
54
4
5
7
6
1
29
8q;3
qs
qa
Note
Note
6Location and Function of Controls
Remote Commander
Control Panel Keys
aTurning on the power/Going to
standby mode
?/1 (On/Standby) key
bSelecting an input signal
(page 13)
INPUT key
cOperating a menu (page 18)
MENU key
RESET key
ENTER /V/v/B/b (arrow) keys
RETURN key
dAdjusting the image (page 14)
ASPECT key (page 20)
KEYSTONE key (page 16)
PATTERN key (page 16)
APA (Auto Pixel Alignment) key*
(page 16)
*Use this key when inputting a computer
signal via the RGB input terminal
(INPUT A or INPUT B).
eUsing various functions during
projecting
D ZOOM (Digital Zoom) +/– key*1
Enlarges a portion of the image while
projecting.
1Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you want to enlarge.
3Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
BLANK key
Cuts off the projected image
temporarily. Press again to restore the
previous image. Picture muting helps
reduce power consumption.
MUTING key
Mutes the audio output temporarily.
Press again to restore the previous
volume.
VOLUME +/– key
Adjusts the volume output.
FREEZE key*2
Pauses a projected image. Press again to
restore the image.
Remote Commander and Control Panel Keys
2
3
4
5
6
1
4
7
INPUT
MENU
APA ECO MODE
RETURN
ASPECT
D ZOOM
KEYSTONE
ENTER
VOLUME
PATTERN
FREEZE
BLANK
MUTING
RESET
36
12
Note
7
Location and Function of Controls
Overview
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
*2: Use this key when inputting a
computer signal.You cannot use this
key when “Type A USB”, “Type B
USB” or “Network” is selected as the
input.
fSetting the energy–saving mode
easily
ECO MODE key
Energy-saving mode can be set easily.
Energy-saving mode consists of “Lamp
Mode,” “With No Input,” “With Static
Signal” and “Standby Mode.”
1Press the ECO MODE key to display
the ECO Mode menu.
2Press the V/v key or ECO MODE key
to select “ECO” or “User” mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Low
With No Input: Standby
With Static Signal: Lamp
Dimming
Standby Mode: Low
User: Sets each item of the ECO
Mode menu as you desire (go to
step 3).
3Select “User” then press the b key.
The setting items appear.
4Press the V/v key to select the item
then press the ENTER key.
5Press the V/v key to select the setting
value.
6Press the ENTER key.
The screen returns to the User screen.
For details on ECO Mode settings, see
“Lamp Mode,” “Constant Brightness,”
“With No Input,” “With Static Signal”
and “Standby Mode” on the Connection/
Power menu (page 26).
If you set “ECO Mode” to “ECO,” or
“Standby Mode”(in “User”) to “Low,”
the network control function will be
disabled in standby mode. If the external
control is being performed by using the
network or network control function, do
not select “ECO,” or do not set “Standby
Mode” ( in “User”) to “Low.”
Others
gInfrared transmitter
About remote commander operation
• Direct the remote commander toward the
remote control receiver.
• The shorter the distance between the
remote commander and the projector is,
the wider the angle within which the
remote commander can control the
projector becomes.
• Make sure that nothing obstructs the
infrared beam between the remote
commander and the remote control
receiver on the projector.
Notes
RETURN
ECO
User
ECO Mode
:Sel :Back
RETURN
Lamp Mode High
Constant Brightness
Auto Power Saving
Standby Mode
Off
ON
With No Input
Lamp Dimming
With Static Signal
Standard
User
:Sel :Set :Back
Note
8Connecting the Projector
BPreparation
Connecting the Projector
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connection with a computer is explained for each input signal.
INPUT A/INPUT B
It is recommended that you set the resolution of your computer to 1280 × 800 pixels
(VPL-SW235/SW225) or 1024 × 768 pixels (VPL-SX236/SX235/SX226/SX225) for the
external monitor.
INPUT C
Notes
Connecting a Computer
For connecting a computer with an RGB output terminal.
RGB output
terminal
Audio output
terminal
Mini D-sub 15-pin cable (supplied)
Computer
Audio cable (Stereo mini plug)
(not supplied)
Note
For connecting a computer with an HDMI output terminal.
HDMI output
terminal
HDMI cable
(not supplied)
Computer
9
Connecting the Projector
Preparation
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
USB terminal (Type B) ( )
For connecting to a computer with a USB terminal (“Playing Video and Audio using USB
Connection” (page 44)).
LAN terminal
For connecting to a computer via a hub or router (“Presentation Function via Network”
(page 40)).
Notes
USB A-B cable (not
supplied)
Computer
USB terminal
(Type A)
LAN cable (straight type)
(not supplied)
Computer
LAN
terminal
Wired connection
Computer
Wireless connection
Hub, Wireless router, etc.
10 Connecting the Projector
USB terminal (Type A) ( )
For connecting a USB wireless LAN module IFU-WLM3 (not supplied) (“Presentation
Function via Network” (page 40)).
• Undesignated USB wireless LAN modules do not work.
• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in
Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.
• For connecting to the access point, access to the Web browser, and input the settings for the access
point to connect. For details, see “Setting the WLAN Network of the projector” (page 33).
Connections with a VHS video deck, DVD player, or BD player are explained for each input
signal.
S VIDEO IN
For connecting video equipment with an S-video output terminal.
Notes
Connecting a Video equipment
USB wireless LAN module
IFU-WLM3 (not supplied)
Computer
Wireless router, access
point
S video output
terminal
Audio output
terminal
S video cable (not supplied)
Video equipment
Audio cable (Phono plug × 2)
(not supplied)
11
Connecting the Projector
Preparation
VIDEO IN
For connecting video equipment with a video output terminal.
INPUT A
For connecting video equipment with a YPBPR output terminal.
INPUT C
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
Notes
Video cable (not supplied)
Audio cable (Phono plug × 2) (not supplied)
Video output
terminal
Audio output
terminal
Video equipment
Component – Mini D-sub 15-pin cable (not supplied)
Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)
Video equipment
YPBPR output
terminal
Audio output
terminal
Video equipment
HDMI cable
(not supplied)
HDMI output
terminal
For connecting video equipment with an HDMI output terminal.
12 Connecting the Projector
Microphone ( )
For connecting a microphone.
Only dynamic microphones are supported.
USB terminal (Type A) ( )
For connecting a USB memory device (“Using USB Media Viewer” (page 46)).
OUTPUT
Projected images or input audio can be output to display equipment such as a monitor or audio
equipment such as speakers with a built-in amplifier.
Projected images and audio can be output.
Connecting a microphone
Note
Connecting a USB memory device
Connecting an External Monitor and Audio Equipment
Note
Microphone
(not supplied)
USB memory device
(not supplied)
Audio cable
(stereo mini plug)
(not supplied)
Audio input
terminal
Mini D-sub 15-pin cable
(supplied)
RGB input
terminal
Audio equipment
Display equipment
13
Projecting an Image
Projecting/Adjusting an Image
BProjecting/Adjusting an Image
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
and projected image sizes, see “Projection Distance” (page 64).
1Plug the AC power cord into the wall
outlet.
2Connect all equipment to the projector
(page 8).
3Press the ?/1 key to turn on the unit.
4Turn on the connected equipment.
5Select the input source.
Press the INPUT key on the projector to
display the menu for switching input
signal on the screen. Press the INPUT
key repeatedly, or press the V/v key to
select an image to be projected.
6When projecting a computer image,
switch your computer’s output to
external display.
The method to switch the output varies
depending on the type of computer.
(Example)
To project image files stored in a USB
memory device, see “USB Media
Viewer” (page 46). To play video and
audio using USB Connection, see
“Playing Video and Audio using USB
Connection” (page 44). To use
Presentation Function via Network, see
“Presentation Function via Network”
(page 40).
Computer
Video equipment
Projector
Wall outlet
1
2
5
4
3
6
+
15
Projecting an Image
Projecting/Adjusting an Image
Adjusting the tilt of the projector with the front feet (adjustable)
By changing the tilt of the projector with the foot adjust buttons/front feet (adjustable), you can
adjust the position of the projected image.
How to adjust the angle
1Press and hold the foot adjust buttons.
2Lift up the front of the projector to
adjust the angle.
3Release the foot adjust buttons.
4Turn the front feet (adjustable) to set
the angle of the projector precisely.
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the front feet (adjustable) extended.
Changing the aspect ratio of the projected image
Press the ASPECT key on the remote commander to change the aspect ratio of the projected
image. You can also change the setting in Aspect of the Screen menu (pages 20, 22).
Notes
16 Projecting an Image
Correcting trapezoidal distortion of the projected image (Keystone feature)
Normally the Keystone feature automatically adjusts the projected image. The Keystone
feature may not work automatically if the screen is tilted. In this case, set Keystone manually.
1Press the KEYSTONE key on the remote
commander or select V Keystone in the
Installation menu.
2Use the V/v/B/b keys to set the value. The
higher the value, narrower the top of the
projected image. The lower the value, the
narrower the bottom.
Since the Keystone adjustment is an electronic
correction, the image may be deteriorated.
Displaying a pattern
You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN
key on the remote commander. Press the PATTERN key again to restore the previous image.
You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard
or blackboard without using a computer.
You cannot use this key when “Type A USB”, “Type B USB” or “Network” is selected as the input.
Automatically adjusts Phase, Pitch and Shift of projected image while a
signal is input from a computer (APA (Auto Pixel Alignment))
Press the APA key on the remote commander. Press again to cancel adjusting during the setting.
You can also set APA in the Screen Menu (page 21). If Smart APA in the Function menu is set
to “On”, executes APA automatically when a signal is input (page 24).
Note
Increase the number
towards plus
Increase the number
towards minus
Note
17
Projecting an Image
Projecting/Adjusting an Image
1Press the ?/1 key on the unit or the remote commander.
The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds
again, shutdown is cancelled.
Do not turn off the projector soon after the lamp lights. It may cause a malfunction of the lamp
(does not light ,etc.).
2Unplug the AC power cord from the wall outlet.
Turning off without displaying confirmation message
Press and hold the ?/1 key on the unit for a few seconds (page 51).
ECO gauge
This gauge indicates the current effectiveness of the projector’s ECO function. (For details on
the ECO function, see “ECO MODE key” (page 7) and “ECO” (page 26).)
The leaf icons are displayed when the projector is shut down. The number of displayed icons
varies according to how much energy is saved as a result of using the ECO function.
Turning Off the Power
Note
ECO gauge
18 Using a MENU
BAdjustments and Settings Using a Menu
Using a MENU
The menu displays used for the explanation below may be different depending on the model you are
using.
1Press the MENU key to display the
menu.
2Select the setting menu.
Use the V/v key to select the setting
menu then press the b key or ENTER
key.
3Select the setting item.
Use the V/v key to select the setting
menu then press the b key or ENTER
key.
To return to the selection screen of the
setting menu, press the B or RETURN
key.
4Make the setting or adjustment for the
selected item.
The setting method varies, depending on
the setting item.
If the next menu window is displayed,
select the item according to the
operations in step 3 and then press the
ENTER key to register the setting.
To return to the selection screen of the
setting items, press the B or RETURN
key. You can press the RESET key to
reset an item to its factory setting value
to aid setting.
Using a pop-up menu
Press the V/v/B/b key to select an item.
A selected item takes effect
immediately, except “Language”, which
will take effect after you press the
ENTER key.
Using the setting menu
Press the V/v key to select the item.
Press the ENTER key to register the
setting and return to the previous screen.
Using the adjustment menu
To increase the value, press the V/b key
and to decrease the number, press the
v/B key. Press the ENTER key to
register the setting and return to the
previous screen.
5Press the MENU key to clear the
menu.
The menu disappears automatically if no
operation is performed.
Note
Picture Mode Standard
Reset
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
Expert Setting
:Sel :Set :Back
Picture
Middle
Setting menu
80
50
50
50
5
Picture Mode Standard
Reset
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
Expert Setting
:Sel :Set :Back
Picture
Middle
Setting items
RETURN
Picture Mode
Dynamic
Standard
:Back
:Sel
Cinema
Whiteboard
Blackboard
Presentation
AdjustBack
Contrast
19
The Picture Menu
Adjustments and Settings Using a Menu
The Picture Menu
The Picture is used to adjust the picture for each input signal.
*1: The settings in the Picture return to their factory defaults, except for Picture Mode.
*2: When a video signal is input, this option is available.
*3: When the signal without color burst signal is input after selecting “Video” or “S-Video”, this
option is unavailable.
*4: When an analog TV signal is input, this option may not available, depending on the color system.
*5: When “Picture Mode” is set to the item other than “Presentation” or “Blackboard,” this option
is available.
*6: Not available if “Input” is set to “Type A USB.”
*7: When “Picture Mode” is set to “Blackboard,” this option is unavailable.
Items Item descriptions
Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture.
Standard: Provides an image which is natural and well balanced.
Presentation: Provides a bright image, suitable for presentations.
Blackboard: Provides an image suitable for displaying on a blackboard.
Whiteboard: Provides an image suitable for displaying on a whiteboard.
Cinema: Provides an image suitable for viewing movies.
Reset*1 Resets the factory setting.
Contrast The higher the value, the greater the contrast. The lower the value, the lower
the contrast.
Brightness The higher the value, the brighter the picture. The lower the value, the darker
the picture.
Color*2 *3 The higher the value, the greater the intensity. The lower the value, the lower
the intensity.
Hue*2 *3 *4 The higher the value, the more greenish the picture becomes. The lower the
value, the more reddish the picture becomes.
Color Temp.*5 High/Middle/Low: The higher the value, the more bluish the picture. The
lower the value, the more reddish the picture.
Sharpness*6 The higher the value, the sharper the picture. The lower the value, the softer
the picture.
Expert Setting
Gamma
Mode*7 Graphics1: Gamma correction to make halftones brighter. This setting is
suitable when projecting highly colorful images, such as photos, in a bright
place.
Graphics2: Gamma correction to improve the reproduction of halftones.
Highly colorful images, such as photos, can be reproduced in natural tones.
Graphics3: Selects gamma correction to emphasize bright parts. Projects
images explicitly.
Notes
20 The Screen Menu
The Screen Menu
The Screen menu is used to adjust the size, position and aspect ratio of the projected image for
each input signal.
Items Item descriptions
Aspect*1 Changes the aspect ratio of the projected image (page 22).
VPL-SW235/SW225:
When the computer
signal is input
4:3: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected image
size without changing the aspect ratio of the input signal.
Full 2: Displays the image to fit the maximum projected image
size changing the aspect ratio of the input signal.
Full 3: Displays the image to fit the maximum width or height, up
to 1280 × 720 pixels, without changing the aspect ratio of the
input signal.
Normal: Displays the image on the center position of the
projected screen without changing the resolution of the input
signal or enlarging the image.
VPL-SW235/SW225:
When the video signal
is input
4:3: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full: Displays the image to fit the maximum projected image size
changing the aspect ratio of the input signal.
Zoom: Zooms the center area of a projected image.
VPL-SX236/SX235/
SX226/SX225: When
the computer signal is
input
4:3: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected image
size without changing the aspect ratio of the input signal.
Normal: Displays the image on the center position of the
projected screen without changing the resolution of the input
signal or enlarging the image.
VPL-SX236/SX235/
SX226/SX225: When
the video signal is
input
4:3: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Zoom: Zooms the center area of a projected image.
21
The Screen Menu
Adjustments and Settings Using a Menu
*1: • Note that if the projector is used for profit or for public viewing, modifying the original picture
by switching to the aspect mode may constitute an infringement of the rights of authors or
producers, which are legally protected.
• Depending on the input signal, setting items for aspect ratio or some other setting items cannot
be set in some cases, or changing the aspect ratio setting may have no effect.
• A part of the image may be displayed in black, depending on the setting item.
*2: Available when a computer signal is input from the RGB input terminal (INPUT A/INPUT B).
*3: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Phase,”
“Pitch,” and “Shift” items manually.
*4: Available when a computer or a video signal is input from the RGB/YPBPR input terminal
(INPUT A).
*5: When “APA” (page 21) or “Smart APA” (page 24) is performed, the adjusted value for “Pitch”
will return to its factory default. If you want to continue using the adjusted value, set “Smart
APA” to “Off.”
Adjust Signal Adjusts the image of computer signal. Use this item if the edge of
the image is cut and reception is bad.
APA*2 *3 Automatically adjusts the projected image to an optimum quality
when you press the ENTER key (page 6).
Phase*2 Adjusts the dot phase of the display pixel and the input signal. Set
to the value where looks clearest.
Pitch*2 *5 The higher the value, the wider the horizontal image elements
(pitch). The lower the value, the narrower the horizontal image
elements (pitch).
Shift*4 H (Horizontal): The higher the value, the farther right the image
is projected on the screen. The lower the value, the image farther
left.
V (Vertical): The higher the value, the farther up the image is
projected on the screen. The lower the value, the image farther
down.
Notes
Items Item descriptions
22 The Screen Menu
Aspect
VPL-SW235/SW225 *1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
*2: If you select “Full2,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
*3: If you adjust the projected image position
using an image with 16:9 aspect ratio and
then switch the input source to 4:3 image,
the top and bottom edge of the image may
be hidden. In this a case, select “Full3.”
*4: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case, select
“16:9.”
*5: Depending on the input signal, the image
may be projected as illustrated below. In
this a case, select “Zoom.”
Input signal Recommended
setting value and
projected image
Computer signal
4:3 Full1*1 *2 *3
16:9 Full1*1 *2 *3
16:10 Full1*3
Video signal
4:3 4:3*4 *5
16:9 16:9
23
The Screen Menu
Adjustments and Settings Using a Menu
VPL-SX236/SX235/SX226/SX225 *1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
*2: If you select “4:3,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
*3: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case, select
“16:9.”
*4: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case, select
“Zoom.”
Input signal Recommended
setting value and
projected image
Computer signal
4:3 Full1*1
16:9 Full1*1 *2
16:10 Full1*1 *2
Video signal
4:3 4:3*3
16:9 16:9*4
24 The Function Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: APA functions when a computer signal is input via the RGB input terminal (INPUT A/INPUT
B).
*2: The maximum available mic volume is set by the value of “Volume.”
Items Item descriptions
Volume The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Mic Volume Adjust the volume of the microphone.*2
Speaker On/Off: When set to “On,” speaker outputs sound. To not output
sound from the speaker, select “Off.”
Smart APA On/Off: When set to “On,” APA functions automatically when a
signal is input.*1
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (captions or text).
Off: Closed caption does not appear.
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page 54).
Start Up Image On/Off: When set to “On,” the Start Up Image is displayed on the
screen when the projector is powered on.
Notes
25
The Operation Menu
Adjustments and Settings Using a Menu
The Operation Menu
The Operation menu is used for setting for the operations by using the menu or the remote
commander.
*1: You will not be able to use the projector if you forget your password. If you call qualified Sony
personnel because you have forgotten the password, you will be asked to verify the projector’s
serial number and your identity. (This process may differ in other countries/regions.) Once your
identity has been confirmed, we will provide you with the password.
Items Item descriptions
Language Selects the language used in the menu and messages.
Status On: All on-screen statuses are enabled.
Off: Turns off the on-screen displays, except for menus, warning messages
and messages from the message list.
Security Lock*1 On/Off: This function enables restriction of the projector to authorized users
by password. The setting procedures for security locking are as follows:
1Select “On” and press the ENTER key to display the setting menu.
2Input the password with the MENU, V/v/B/b and ENTER keys. (The
default setting password is “ENTER, ENTER, ENTER, ENTER.”)
3Input a new password with the MENU, V/v/B/b and ENTER keys.
4Enter the password again to confirm.
Enter the password when you turn on the projector after disconnecting and
reconnecting the AC power cord.
When it is set to “Off,” you can cancel the security lock. You are required to
input the password again.
If you fail to enter the correct password after three consecutive times, the
projector cannot be used. In this case, press the ?/1 key to go Standby mode
then turn on the power again.
Control Key
Lock
On/Off: When set to “On,” locks all the control panel keys of the projector.
However, you can operate the following when set to “On”:
• Press and hold the ?/1 key for approximately 10 seconds during Standby
mode.
c The projector turns on.
• Press and hold the MENU key for approximately 10 seconds during power
on.
c“Control Key Lock” is set to “Off” and enables operation of all keys on
the projector.
Note
26 The Connection/Power Menu
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
Items Item descriptions
LAN Settings
IP Address
Setup*1 Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: To specify the IP Address manually.
WLAN Settings
WLAN
Connection*2 On/Off: Set the wireless output of the USB wireless LAN module (not
supplied) to On/Off.
WLAN
Network*3 Access Pt. (Auto)/Access Pt. (Manual)/Client*4: Changes modes for
WLAN.*5
Input-A Signal Sel.
Auto/Computer/Video GBR/Component:
When set to “Auto,” selects
the type of video signal input automatically when “Input-A” is selected.
*6
ECO
Lamp Mode High/Standard/Low/Auto*7 *8: When set to “High,” the image
becomes brighter, and power consumption becomes higher. When set to
“Low,” power consumption is minimized; however, the image will be
darker. When set to “Auto,” brightness is adjusted automatically
according to image content. Dark images are projected with brightness
adjusted, leading to energy-saving. Bright images are projected
brightly, without adjusting brightness.
Constant
Brightness
On/Off: Available when the lamp mode is set to High. Outputs light at
a certain brightness.*9
Auto Power Saving
With No Input Lamp Cutoff: The lamp turns off automatically and power
consumption is reduced if no signal is input for about 10 minutes.
The lamp lights again when a signal is input or any key is pressed. In
Lamp Cutoff, the ON/STANDBY indicator lights in orange. (page 50)
Standby*10: If no signal is input to the unit for about 10 minutes, the
power turns off automatically, and the unit enters standby mode.
Off: You can deactivate the With No Input.
With Static
Signal
Lamp Dimming*7 *8 *11: If an image does not change for about 10
seconds, lamp output is gradually reduced (approximately 10% to
15%*12) from that set in the Lamp Mode. Automatically the lamp
slowly darkens to approximately 30% of its lamp output according to
the selected time (with no change to input signal) “5,” “10,” “15,” “20”
minutes or “Demo.,” While dimming the lamp, the message “Lamp
Dimming” appears. If you select “Demo.,” the image will start to
darken about 40 seconds later. When any change in signal is detected,
or an operation (remote control or control panel) is performed, normal
brightness is restored.
Off: You can deactivate the With Static Signal.
Standby
Mode*13
Standard/Low: When set to “Low,” lowers power consumption in
Standby mode.
27
The Connection/Power Menu
Adjustments and Settings Using a Menu
*1: To set the IP address manually, select “Manual”, press “Apply”, then enter the IP address.
*2: Reflecting changes in WLAN settings may take a few moments.
*3: If the projector cannot connect wirelessly, click [Apply] once again to make sure the
connection is established. For details, see “Setting the WLAN Network of the projector”
(page 33).
*4: The factory default settings for “Access Pt. (Manual)” are as follows.
SSID: VPL + MAC address for LAN
Security Method: WEP(64bit)
Password: sony1
To change the settings for “Access Pt. (Manual)”, use a Web browser.
For details, see “Setting the WLAN Network of the projector” (page 33).
If “Access Pt. (Manual)” is set, when you use Presentation Function via Network (page 40),
select “Manual Connect” to connect to the network.
*5: For changing the settings for “Client,” use the Web browser for change. For details, see
“Setting the WLAN Network of the projector” (page 33).
*6: This may not be optimum depending on the input signal. In this case set manually according
to the connected equipment.
*7: This mode does not work for about three minutes after the lamp lights. A change in signal may
not be detected depending on the input image. The lamp may become brighter at intervals
during lamp dimming. However, this is not a malfunction. If With No Input is set, it takes
priority.
*8: Does not function when “Type A USB”, “Type B USB” or “Network” is selected as the input.
In this case, it becomes equivalent to “Standard.”
*9: Constant Brightness mode will be enabled for about 2,000 hours after it is activated at early
usage. After this period, it will be disabled automatically. Activated time and brightness may
vary depending on the usage conditions.
*10: Select “Off” to avoid entering standby mode when there is no input signal.
*11: As the lamp is dimmed gradually, you may not notice any change in brightness. You might only
notice that the lamp has dimmed when its brightness is restored after there is a change in input
signal.
*12: This varies depending on the “Lamp Mode” setting.
*13: When “Standby Mode” is set to “Low,” the network and network control function cannot be
operated while the projector is in standby mode.
Direct Power On On/Off: When set to “On,” you can turn the power on without going to
Standby mode when the AC power cord is connected to a wall outlet.
With the projector turned off, you can also unplug the AC power cord
without going to Standby mode, regardless of the Direct Power On
setting.
Notes
Items Item descriptions
28 The Installation Menu
The Installation Menu
The Installation menu is used for installing the projector.
*1: When “High Altitude Mode” is set to “On,” the speed of the fan increases, and the fan noise
becomes slightly louder.
*2: Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
Items Item descriptions
Image Flip HV/H/V/Off: Flips the projected image horizontally or vertically
according to the installation method.
Installation Attitude Right Side Up/Upside Down/Link to Image Flip: Change the cooling
setting to suit to the installation attitude. When set to “Link to Image Flip,”
the cooling setting changes based on the setting of “Image Flip.”
Continuing to use the wrong setting may affect component reliability.
High Altitude
Mode*1 On/Off: Set to “On” when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
V Keystone*2 Auto/Manual*2: The higher the value, the narrower the top of the
projected image. The lower the value, the narrower the bottom.
Notes
29
The Information Menu
Adjustments and Settings Using a Menu
The Information Menu
The Information menu is used to check projector status, such as total usage time of the lamp.
*1: These items may not be displayed depending on the input signal.
Items Item descriptions
Model Name Displays the model name.
Serial No. Displays the serial number.
fH/fV*1 Displays the horizontal/vertical frequency of the current input signal.
Signal Type Displays the type of the current input signal.
Lamp Timer Indicates the total usage time of a lamp.
Note
30 Using Network Features
BNetwork
Using Network Features
Connection to the network allows you to operate the following features:
• Checking the current status of the projector via a Web browser.
• Remotely controlling the projector via a Web browser.
• Receiving the e-mail report via the projector.
• Making the network settings for the projector.
• Displaying messages on the projected image using an application.
• Supports network monitoring, control protocol (Advertisement, ADCP, PJ Talk, PJ Link,
AMX DDDP [Dynamic Device Discovery Protocol], Crestron RoomView).
• When connecting this projector with the network, consult with the network administrator. The
network must be secured.
• The content communicated via a wireless LAN communication may be intercepted due to the use
of radio waves. To protect the communication content, implement security measures properly
according to the connection environment (page 33).
• When using this projector connected with the network, access the Control window via a Web
browser and change the access limitation of the factory preset values (page 31). It is recommended
to change the password regularly.
• When the setting on the Web browser is completed, close the Web browser to log out.
• The menu displays used for the explanation below may be different depending on the model you
are using.
• Supported Web browsers are Internet Explorer 8/9/10.
• The menu displays only in English.
• If the browser of your computer is set to [Use a proxy server] when you access to the projector
from your computer, click the check mark to set accessing without using a proxy server.
• To display messages, specific application Projector Station for Network Control (Version 1.1 or
later) is necessary. For download or detailed method of using Projector Station for Network
Control, please access the following URL.
http://pro.sony.com/bbsc/ssr/cat-projectors/resource.downloads
Contact your local Sony dealer for detailed information of Projector Station for Network Control.
1Connect the LAN cable (page 9).
2Set the network settings for the
projector using “LAN Settings” on the
Connection/Power menu (page 26).
3Start a web browser on the computer,
enter the following in the address field,
then press the Enter key on your
computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
projector)
You can confirm the IP address of the
projector in the “LAN Settings” on the
Connection/Power menu (page 26).
Notes
Displaying the Control Window of the Projector with a Web
Browser
31
Using Network Features
Network
The following window appears in the
Web browser:
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
How to operate the Control window
Switching the page
Click one of the Page Switching buttons to
display the desired setting page.
Setting the access limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to all
pages
User: Allowed access to all pages except
the Setup page
Set the access limitation from [Password] of
the Setup page.
When you access the Setup page for the first
time, enter “root” in the Name box and enter
“Projector” in the Password box of User.
The Name box of the Administrator is preset
to “root.”
When you change the password, input a new
password after deleting the password
(*****) that was set.
If you forget your password, consult with
qualified Sony personnel.
You can confirm the current settings for the
projector on the Information page.
Page Switching buttons
Note
Confirming the Information
regarding the Projector
Entry area for [Administrator]
Entry area for [User]
Information area
32 Using Network Features
You can control the projector from the
computer on the Control page.
The functions of the buttons shown in the
operation area are the same as the keys on
the remote commander.
Set the e-mail report function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1Click on [Owner information] to enter
the owner information recorded in the
e-mail report.
2Set the timing of the e-mail report.
Click on [Mail Report] to open the Mail
Report page.
Lamp Reminder (Lamp1): Set the
timing of the email report for lamp
replacement. To reset Lamp
Reminder, execute “Lamp Timer
Reset” on the projector (page 24).
Maintenance Reminder: Set the timing
of the email report for maintenance. To
reset Maintenance Reminder, check
the RESET check box and then click
on [Apply].
3Enter the outgoing e-mail address in
the Email Address box then check the
Report Timing check box of the e-mail
report to be sent.
4Set the mail account for sending e-
mail reports.
Mail Address: Enter the e-mail address.
Outgoing Mail Server (SMTP): Enter
the address of outgoing mail server
(SMTP).
Required Authentication: Check this
check box if authentication is required
for sending e-mail.
Operating the Projector from
a Computer
Using the e-mail report
Function
Operation area
1
Owner information button
2
3
4
6
5
Mail Report button
33
Using Network Features
Network
Requires the use of POP
Authentication before sending email
(POP before SMTP): Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.
Incoming Mail Server (POP3): Enter
the address of the incoming-mail
server (POP3) to be used for POP
authentication.
Account Name: Enter the mail account
name.
Password: Enter the password.
SMTP Authentication: Check this
check box to arrange for SMTP
authentication to be performed before
sending e-mail.
Account Name: Enter the mail account
name.
Password: Enter the password.
5Confirm the contents of the e-mail
report.
When you click on [View], the contents
of the e-mail report are displayed.
6Send the test mail.
Check on the Send test mail check box
then click on [Apply] to send your test
mail to the e-mail address you set.
• The email report function will not work if the
network uses Outbound Port25 blocking,
which prevents access to the SMTP server.
• You cannot use the following characters to
enter the characters in the text box: “ ' ”, “ “
”, “ \ ”, “ & ”, “ < ”, “ > ”
Set the LAN network function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1Click on [Network] to open the
Network page.
2Set the items for internet protocol.
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
3Set the items for Ethenet.
MAC Address: Displays the MAC
address of the projector.
Speed: Select the network speed of the
projector.
Set the WLAN network function on the
Setup page.
Entered values will not be applied unless
you click on [Apply].
Notes
Setting the LAN Network of
the projector
Setting the WLAN Network of
the projector
Network button LAN Network
setting area
34 Using Network Features
To use the wireless LAN network, a USB
wireless LAN module IFU-WLM3 (not
supplied) is necessary.
1Click the [WLAN Setting] to open the
WLAN Setting page.
2Enable or disable the radio wave
output of USB wireless LAN module.
Wireless ON: Enables radio wave
output of USB wireless LAN module.
Wireless OFF: Disables radio wave
output of USB wireless LAN module.
WLAN Network: Set the modes for
USB wireless LAN module.
3(a) Input the settings for Access Pt.
Mode.
When the USB wireless LAN module is
activated as an access point, set the items
for the access point.
Probe Response ON: Responds to the
probe request from the client.
Probe Response OFF: Does not
respond to the probe request from the
client.
Network Name (SSID): Displays the
SSID of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Input the SSID of the access point if
“Access Pt. (Manual)” is selected.
Channel Setting: Displays the channel
of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Select the channel of the access point
if “Access Pt. (Manual)” is selected.
Encryption Type: Displays the security
method of the access point if “WLAN
Network” is set to “Access Pt. (Auto).”
Select the security method of the
access point from the following list if
“Access Pt. (Manual)” is selected.
Key: Input the password for security
method of the access point according
to the selected encryption type as
below;
Items Descriptions
Access Pt.
(Auto)
Activates USB wireless
LAN module as an access
point, and items for
WLAN are automatically
set.
Access Pt.
(Manual)
Activates USB wireless
LAN module as an access
point. Set the items for
WLAN manually.
Client Activates USB wireless
LAN module as a client.
3-(a)
2
WLAN Setting button
Encyption
Type Descriptions
Open Sets the security method
of the access point to open
system authentication.
WEP 64bit Sets the security method
of the access point to
WEP (64bit).
WEP 128bit Sets the security method
of the access point to
WEP (128bit).
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES))
Sets the security method
of the access point to
MIX. (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security methods).
WPA2-
PSK(AES)
Sets the security method
of the access point to
WPA2-PSK (AES).
Encyption
Type Password
Open The password cannot be
input.
WEP 64bit Input 5 ASCII characters
for a password.
35
Using Network Features
Network
(b) Input the settings for Client
Mode.
When the USB wireless LAN module is
activated as a client, set the items for the
client (set the items for the access point
the projector tries to connect to).
Connection Status: Displays the
connecting status between the access
point and projector.
SSID: Input the SSID of access point the
projector tries to connect to.
Encryption Type: Select the security
method of access point the projector
tries to connect to from the following
list.
Key: Input the password for security
method of the access point according
to the selected encryption type as
below;
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
WEP 128bit Input 13 ASCII characters
for a password.
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES)) or
WPA2-PSK
(AES)
Input 8-63 ASCII
characters for a password.
Encyption
Type Descriptions
Open Sets the security method
of the access point to open
system authentication.
Encyption
Type Password
3-(b)
WEP 64bit Sets the security method
of the access point to
WEP (64bit).
WEP 128bit Sets the security method
of the access point to
WEP (128bit).
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES))
Sets the security method
of the access point to
MIX. (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security methods).
WPA2-PSK
(AES)
Sets the security method
of the access point to
WPA2-PSK (AES).
Encyption
Type Descriptions
Open The password cannot be
input.
WEP 64bit Input 5 ASCII characters
for a password.
WEP 128bit Input 13 ASCII characters
for a password.
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES)) or
WPA2-PSK
(AES)
Input 8-63 ASCII
characters for a password.
Encyption
Type Descriptions
36 Using Network Features
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
MAC Address: Displays the MAC
address for USB wireless LAN
module.
Change the label names for the input
terminals that will be displayed on the
projected screen on the Setup page. The
entered label names will not be applied
unless you click on [Apply].
1Click on [Advanced Menu] to open
the Setup page.
2Click on the [Input Label] and open
the Input Label setting window.
Clear the check box for the label that
you want to change and input the label
name. You can input up to 20 of the
following letters.
Alphabets: “a” to “z”, “A” to “Z”
Numbers: “0” to “9”
Characters: “.”, “, ”, “:”, “;”, “!”, “?”, “'”,
“"”, “#”, “$”, “%”, “&”, “@”, “(”, “)”,
“<”, “>”, “[”, “]”, “{”, “}”, “|”, “=”, “*”,
“+”, “-”, “/”, “_”, “\”, “^”, “`”, “~”,
space
3Click the [Apply] button to apply
the set label names.
The label name will be reflected on the
screen when the input of the projector is
changed.
Change the settings for the control protocol
on the Setup page. Entered values will not be
applied unless you click on [Apply].
1Click on [Advanced Menu] to display
the buttons for more settings.
Setting the Custom Labels for
the Input Terminals of the
Projector
Advanced Menu button
Setting the Control Protocol
of the Projector
Input Label button
Label name for the
input terminal
Use the
factory
default
setting
Input Terminal Label Display Screen
37
Using Network Features
Network
2(a) Set Advertisement.
Start Advertisement Service:
Set Advertisement to enabled or
disabled. Items for Advertisement are
enabled only when this function is
enabled. The function is disabled at the
factory default.
-Community:
Input the community name for
Advertisement and PJ Talk. If the
community name for Advertisement is
changed, the one for PJ Talk will also be
changed. Only four alphanumeric
characters can be input. The factory
default setting is “SONY.” It is
recommended that the community name
be changed from the factory setting to
avoid unnecessary access to the
projector from other computers.
-Port No.:
Input the transmit port of
Advertisement. The factory default
setting is “53862.”
-Interval:
Input the transmission interval (seconds)
of Advertisement. The factory default
setting is “30.”
-Broadcast Address:
Input the destination of data via
Advertisement. If nothing is input, the
data will be broadcast in the same
subnetwork.
(b) Set ADCP.
Start ADCP Service: Set ADCP to
enabled or disabled. Items for ADCP are
enabled only when this function is
enabled. The function is enabled at the
factory default.
Advanced Menu button
Advertisement button
Advertisement Service
setting area
ADCP button
ADCP Service setting area
38 Using Network Features
-Requires Authentication: Set the
authentication for ADCP to enabled or
disabled. The password is the same as
that of the Web page administrator.
-Port No.: Input the server port of
ADCP. The factory default setting is
“53595.”
-Timeout: Input the time (seconds) until
ADCP communication is terminated in
case it is disconnected. The factory
default setting is “60.”
-Host Address: Input the IP address that
the ADCP server is allowed to receive. If
no IP address is input, receiving
commands will be allowed from any IP
address. From the moment the IP
address is input, access will be allowed
only from that input IP address. For
security reasons, it is recommended to
input an IP address to restrict access.
(c) Set PJ Talk.
Start PJ Talk Service:
Set PJ Talk to enabled or disabled. Items
for PJ Talk are enabled only when this
function is enabled. The function is
disabled at the factory default.
-Community:
Input the community name of
Advertisement and PJ Talk. If the
community name for PJ Talk is changed,
the one for Advertisement will also be
changed. Only four alphanumeric
characters can be input. The factory
default setting is “SONY.” It is
recommended that the community name
be changed from the factory setting to
avoid unnecessary access to the
projector from other computers.
-Port No.:
Input the server port of PJ Talk. The
factory default setting is “53484.”
-Timeout:
Input the time (seconds) until PJ Talk
communication is terminated in the case
that it is disconnected. The factory
default setting is “30.”
-Host Address:
Input the IP address that the PJ Talk
server is allowed to receive. If no IP
address is input, receiving commands
will be allowed from any IP address.
From the moment the IP address is input,
access will be allowed only from that
input IP address. For security reasons, it
is recommended to input an IP address
to restrict access.
(d) Set PJ Link.
PJ Talk button
PJ Talk Service setting area
PJ Link button
PJ Link Service setting area
39
Using Network Features
Network
Start PJ Link Service:
Set PJ Link to enabled or disabled. Items
for PJ Link are enabled only when this
function is enabled. This function is
disabled at the factory setting.
-Requires Authentication:
Set the authentication for PJ Link to
enabled or disabled.
-Password:
Input the authentication password for PJ
Link. For the factory default password,
refer to the PJ Link specifications.
(e) Set the system service.
Start DDDP Service:
Set DDDP to enabled or disabled. For
details, refer to the DDDP specifications
in the reference from AMX Corporation.
The function is disabled at the factory
default.
Crestron Control:
For details, refer to the specifications in
product catalogues, etc., from Crestron
Corporation.
-IP Address:
Input the Crestron system server.
-IP ID:
Input the IP ID for the CIP protocol.
-Port No.:
Input the port number for the CIP
protocol server.
(f) Reset the network settings.
Reset:
Reset all Web browser settings to their
factory defaults.
Service button
System service setting area
Reset button Reset
40 Using Presentation Function via Network
BPresentation Function via Network
Using Presentation Function via Network
The Presentation Function via Network enables you to do the following:
• Connect a maximum of eight computers to the projector.
• Project images from a maximum of four computers simultaneously.
• Connecting a USB wireless LAN module (not supplied) to the projector as an access point,
allows the projector to connect to up to seven computers simultaneously.
Presentation Function via Network requires installation of Projector Station for Network
Presentation (supplied CD-ROM). For information on updates of Projector Station for Network
Presentation, visit Sony’s web site: https://www.servicesplus.sel.sony.com/
System requirements for using the application are as follows.
OS
Windows XP: Home/Professional
Windows Vista: Home Premium/Business/Ultimate/Enterprise
Windows 7: Home Premium/Professional (Recommended)/Ultimate/Enterprise
Windows 8/8.1
Mac OS X: 10.6.x/10.7.x/10.8.x
CPU
Pentium4 2.8GHz or faster
• To install the application, administrative rights are required.
• If you do not have administrative rights, the application may not run properly.
• If firewall or security software is installed, the application may not run properly.
• Depending on the type of network adapter, the application may not run properly.
• Images may not be projected properly depending on the operating environment or the application.
1Close all running applications.
2Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
3Open the CD-ROM.
For Windows:
Double-click the .exe file. When the
message “User Account Control” is
displayed, click “Allow” or “Yes.”
For Mac:
Double-click the .pkg file.
4Follow the on-screen instructions to
install the software.
1Connect the projector to a network.
For a wired connection, connect the
projector by a LAN cable, then make the
network settings. For details, see “LAN
Settings” (page 26) or “Setting the LAN
Network of the projector” (page 33).
For a wireless connection, see “LAN
terminal” (page 9) or “USB terminal
(Type A) ( )” (page 10). Also check
“WLAN Settings” (page 26).
2Turn on the projector.
Select “Network” as the input source
(page 13).
Notes
Installing Projector Station
for Network Presentation
Starting Projector Station for
Network Presentation
41
Using Presentation Function via Network
Presentation Function via Network
3Start Projector Station for Network
Presentation.
For Windows:
Select [Start]-[All Programs]-[Projector
Station for Network Presentation] on the
computer.
For Mac:
Double-click [Projector Station for
Network Presentation] in Applications
folder.
After starting Projector Station for Network
Presentation, the connection method
selection window appears.
1Select the connection method.
Select “Network connection” or
“Wireless direct connection” depending
on your use environment.
Network connection: Select this item
when the projector uses LAN or
“WLAN Network” is set to “Client”
on the Connection/Power menu.
Wireless direct connection: Select this
item when “WLAN Network” is set to
“Access Pt. (Auto)” or “Access Pt.
(Manual)” on the Connection/Power
menu of the projector.
For Windows:
• The appearance of the application on the
screen is subject to change without notice.
• When a projector is connected to a network
via a wireless connection, if the “SSID” is
changed from the factory default, it may not
be found.
• When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
2Set the projector an image will be
projected to.
a) Network connection
Select or directly input the IP address of
the projector that the computer is
connected to. If the Connection CODE
function is activated, input the four digit
Connection CODE that is displayed on
the right bottom area of the screen (only
on the projectors with the Connection
CODE function).
Since the Connection CODE function is
not available on this projector, there is
no need to enter the code for connection.
Projecting an Image
Connection method selection window
Notes
Network connection window
Wireless direct connection window
42 Using Presentation Function via Network
b) Wireless direct connection
Select or directly input the SSID of the
projector that the computer is connected
to. If the “WLAN settings” is set to
“Access Pt.(Auto)” and “Auto” has been
checked, you can skip inputting the
wireless password. If the Connection
CODE function is activated, input the
four digit Connection CODE that is
displayed on the right bottom area of the
screen (only on the projectors with the
Connection CODE function).
Since the Connection CODE function is
not available on this projector, there is
no need to enter the code for connection.
3Click “Connect”.
If other users are projecting an image,
the controller appears on the screen.
Click the to start projecting an
image (page 42).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Display related settings (such as your
computer’s resolution) change when the
application is started.
For Windows:
For Mac:
Note
Connection Settings
Item Item descriptions
IP Address Input the IP Address.
List the IP addresses of the
projectors on the network
and IP addresses of
projectors connected so far,
as candidates.
SSID Input SSID.
List the peripheral SSIDs
and SSIDs of projectors
connected to the computer
so far, as candidates.
Update
button
Search the network again
and update the candidate list
of the projectors.
Security
Method
Displays the security method
of the input SSID.
Wireless
Password
Input the wireless password
of the SSID. If open system
Authentication is used, input
of the wireless password is
unnecessary.
Auto
(checkbox)
Check this item when the
“WLAN settings” is set to
“Access Pt.(Auto)”.
CODE Input the Connection CODE
displayed on the screen of
the projector (only on the
projectors with the
Connection CODE
function). The Connection
CODE function is not
available on this projector.
Connect Connect to the projector that
is set in the items above and
start to project an image.
Using the Controller
Items Functions
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(screen turns black).
Item Item descriptions
Network
Presentation
User 000001
CODE: 1234
8
User64
1
CODE: 1234
43
Using Presentation Function via Network
Presentation Function via Network
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
Projection
method
Not projecting an image.
Project in full screen.
Project in the left half of
the screen.
Project in the right half of
the screen.
Project in the upper left
quadrant of the screen.
Project in the upper right
quadrant of the screen.
Project in the lower left
quadrant of the screen.
Project in the lower right
quadrant of the screen.
Display the strength of the
wireless signal.
CODE
Display the Connection
CODE of the projector
that is connected to the
computer (only on the
projectors with the
Connection CODE
function). The Connection
CODE function is not
available on this projector.
Display the number of
users connected to the
projector.
Display the users’ status.
Items Functions
44 Playing Video and Audio using USB Connection
BPlaying Video and Audio using USB Connection
Playing Video and Audio using USB
Connection
You can also play video and audio simply by connecting the projector and computer with a
USB A-B cable (not supplied).
Playing video and audio using USB connection requires to start USB Display.
System requirements for using the application are as follows.
OS
Windows XP: Home/Professional (recommended)
Windows Vista: Home Premium/Business/Ultimate/Enterprise
Windows 7: Home Premium/Professional (Recommended)/Ultimate/Enterprise
Windows 8
Mac OS X: 10.6.x/10.7.x/10.8.x
CPU
Pentium4 2.8GHz or faster
1Connecting the projector and your computer with a USB A-B cable (not supplied)
(page 9).
2Turn on the projector.
Select “Type B USB” as the input source (page 13). After a short time, the projector is
recognized as a CD-ROM drive in the computer.
3Open “USB Display” in the CD-ROM drive.
• The resolution of your computer changes when the application is started.
• Depending of the computer’s setting, the application may start automatically.
• When you are finished using the projector, you can simply disconnect the USB cable without using
the Safely Remove Hardware option.
• Images may not be projected properly depending on the operating environment or the application.
• If your OS is Windows Vista, Windows 7 or Windows 8, turning off the Windows Aero is
recommended.
After starting USB Display, the controller
appears on the screen, and projection
playback starts automatically.
For Windows:
Starting USB Display
Notes
Playing Video and Audio Using the Controller
USB Display
45
Playing Video and Audio using USB Connection
Playing Video and Audio using USB Connection
For Mac:
Items Functions
Start audio/video
playback.
Pause audio/video
playback.
Stop audio/video playback
(the screen turns black).
Display information about
USB Display.
46 Using USB Media Viewer
BUSB Media Viewer
Using USB Media Viewer
You can browse image files stored in a USB memory device inserted in the USB terminal of
the projector, without using a computer.
Supported storage media and file format:
• Supported storage media: USB flash memory
• Supported format of storage media: FAT format
• Supported file format: JPEG (.jpg/.jpeg), Bitmap (.bmp), PNG (.png), GIF (.gif), TIFF (.tif/.tiff)
• exFAT, NTFS are not supported.
• TIFF files containing EXIF information are not supported.
• Image files in a USB memory device connected to the projector via a USB hub may not be
displayed.
• Security protected USB memory may not function correctly.
• A USB memory card reader that is recognized as more than one drive may not function correctly.
• Display of image files that are larger than 4092 × 3072 pixels is not guaranteed. It may take a long
time to display, or may not be displayed.
• A folder with a deep folder structure or with a very long folder name may not be displayed.
• An image may not be displayed, depending on its file type.
• Files or folders with names including non-alphanumeric characters may not be displayed.
• When displaying an image file, do not disconnect the USB memory device. It may cause a
malfunction of the USB memory device or the projector. Disconnect the USB memory device
when the USB Memory device selection screen is displayed.
1Connect a USB Memory device to the projector (page 12).
2Select “Type A USB” as the input source (page 13).
3Select the USB Memory device.
Press the ENTER key to display in the thumbnail mode.
USB Media Viewer has three display modes: “thumbnail mode,” “display mode” and
“slideshow mode.”
Notes
47
Using USB Media Viewer
USB Media Viewer
Press the V/v/B/b key on the remote commander to select an image, then press the ENTER
key. The option menu appears in the lower part of the screen.
You can select the display order of thumbnails and display method of image files.
• Files without thumbnail data (including those created by an application) appear as blank icons.
• Cannot display more than 200 image files and folders in one folder.
Thumbnail Mode
The image files in the folder are displayed as a thumbnail list.
Option menu
Option Menu
Items Item descriptions
Hide the option menu.
Switch to the display mode, and display the selected image in full screen
view. (page 48)
Switch to the slideshow mode, and start the slideshow from the selected
image. (page 48)
Sort image files.
Sort image files
Sort by name in alphabetical order.
Sort by name in reverse alphabetical order.
Sort by date in chronological order.
Sort by date in reverse chronological order.
Notes
a
z
a
z
a
z
1
2
2
1
48 Using USB Media Viewer
In display mode, you can view a selected image in full screen view.
Press the ENTER key on the remote commander. The option menu appears in the lower part of
the screen.
In slideshow mode, you can view images as a slideshow.
Press ENTER key on the remote commander. The slideshow pauses and the option menu
appears in the lower part of the screen.
Display Mode
Option menu
Option Menu
Items Item descriptions
Hide the option menu.
Return to the thumbnail mode (page 47).
Rotate the image 90 degrees counter-clockwise.
Rotate the image 90 degrees clockwise.
Switch to the slideshow mode, and start the slideshow from the selected
image. (page 48)
Display the previous image.
Display the next image.
Slideshow Mode
Option menu
49
Using USB Media Viewer
USB Media Viewer
Option Menu
Items Item descriptions
Hide the option menu.
Return to the thumbnail mode (page 47).
Display the previous image.
Display the next image.
Press the V/v key to change the slideshow time interval.
Slideshow time interval
After 3 seconds, display the next image.
After 5 seconds, display the next image.
After 10 seconds, display the next image.
Press the V/v key to change the slideshow effect.
Slideshow effect
The next image appears with tile transition effect.
The next image appears from the left side of the screen.
The next image appears from the right side of the screen.
The next image appears from the top of the screen.
The next image appears from the bottom of the screen.
Press the V/v key to change the slideshow repeat setting.
Repeat Setting
After displaying the last image, the slideshow starts from the first image
again.
After displaying the last image, the slideshow ends and returns to the
thumbnail mode.
3
3
5
10
On
On
Off
50 Indicators
BOthers
Indicators
The indicators allow checking the status and notify you of abnormal operation of the projector.
If the projector exhibits abnormal status, address the problem in accordance with the table
below.
ON/STANDBY indicator
LAMP/COVER indicator
Status Meaning/Remedies
Lights in red The projector is in Standby mode.
Flashes in green • The projector is ready to operate after having been turned on.
• The lamp cools after the projector is turned off.
Lights in green The projector’s power is on.
Lights in orange The projector is in With No Input (Lamp Cutoff). (page 26)
Flashes in red The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If the symptom is shown again, consult with qualified Sony
personnel.
Flashes twice The internal temperature is unusually high. Check the items below.
• Check if nothing is blocking the ventilation holes. (pages 4, 4)
• Check if the air filter is not clogged. (page 56)
• Check if the Installation Attitude in the Installation menu is set
correctly. (page 28)
Flashes six times Unplug the AC power cord from a wall outlet. After checking that the
ON/STANDBY indicator goes out, plug the power cord to a wall
outlet again then turn on the projector.
Other number of
flashes
Consult with qualified Sony personnel.
Status Meaning/Remedies
Flashes in red Symptoms are indicated by number of flashes. Address the problem in
accordance with the following.
Flashes twice The lamp cover is not attached securely. (page 54)
Flashes three times The temperature of lamp is unusually high. Turn off the power and
wait for lamp to cool then turn on the power again. If the symptom is
shown again, the lamp may be burnt out. In this case, replace the lamp
with a new one (page 54).
51
Messages List
Others
Messages List
When any of the messages listed below appears on the projected image, address the problem in
accordance with the table below.
Messages Meaning/Remedy Page
High temp.! Lamp off in
1 min.
Check the items below.
• Check if nothing is blocking the ventilation holes.
• Check if the air filter is not clogged.
• Check if the Installation Attitude in the Installation menu is
set correctly.
4, 4,
28, 56
Frequency is out of
range!
Change the output setting of the connected equipment to one
for signals supported by the projector.
63
Please check Input-A
Signal Sel.
Set “Input-A Signal Sel.” to “Auto” or select the input signal
type to suit to the input signal.
26
Please clean the filter. Clean the air filter. 56
Please replace the Lamp
and clean the Filter.
Replace the lamp with a new one and clean the air filter. The
message appears whenever you turn on the power until you
replace the lamp and reset the lamp timer.
54, 56
Projector temperature is
high. High Altitude
Mode should be “On” if
Projector is being used
at high altitude.
When not using the projector at an altitude of 1,500 m or
higher, check the items below.
• Check if nothing is blocking the ventilation holes.
• Check if the air filter is not clogged.
• Check if Installation Attitude in the Installation menu is set
correctly.
4, 4,
28, 56
Not applicable! Invalid key was pressed. –
The control keys are
locked!
“Control Key Lock” is set to “On.” 25
Projector will shutdown
soon
Press ?/1 Key to Restart
The ?/1 key was pressed and the projector will be shut down
soon. To cancel shutdown, press the ?/1 key again (the
projector will remain on). To turn off the projector directly,
press and hold the ?/1 key.
17
Lamp Dimming Reduces lamp output when “With Static Signal” is set. When
any change in signal is detected, or an operation (remote
control or control panel) is performed, normal brightness is
restored.
26
52 Troubleshooting
Troubleshooting
Before asking to have the projector repaired, try to diagnose the problem, following the
instructions below.
Symptoms Remedy Page
The power is not turned
on.
Check if the AC power cord is firmly connected. –
When the “Control Key Lock” is set to “On,” you cannot turn
on the projector using the ?/1 key on the projector.
25
If the lamp or lamp cover is not attached securely, the projector
cannot be turned on.
54
No image. Check if the connecting cable is connected to external
equipment firmly.
8
Check the computer signal is set for output to an external
monitor only. If you set your computer to output to both the
computer’s display and an external monitor, the external
monitor image may not be displayed properly. Set your
computer to output to only an external monitor.
13
Check if the application “USB Display” or “Projector Station
for Network Presentation” is running.
40, 44
Check if the USB memory device connected to the projector is
compatible with the projector.
46
Check if the input source is correctly selected. 13
Check if the picture is muted by pressing the BLANK key. 6
The application “USB
Display” or “Projector
Station for Network
Presentation” does not
start.
Check if the computer connected to the projector meets the
system requirement for the applications.
40, 44
The computer cannot
connect to the projector.
• Check “LAN Settings” of the projector.
• Check the condition of the wireless connection.
26
On-screen display does
not appear.
The on-screen display does not appear when “Status” in the
Operation menu is set to “Off.”
25
The aspect ratio of the
display is not right/the
image is displayed
smaller /a portion of
image does not appear.
The image may not display correctly because the input signal
cannot be judged correctly. In this case, set “Aspect” manually.
6, 20,
22
The image is a
trapezoid.
The images become trapezoidal because of the projection
angle. In this case, you can correct the trapezoidal distortion,
using a Keystone feature.
6, 16,
28
When the “V Keystone” is set to “Manual,” the keystone
feature does not work automatically. Set “V Keystone” to
“Auto” or “Manual” to set manually.
6, 16,
28
When the projector is installed on an uneven surface, the
feature may not work properly. In this case, select “Manual” to
set “V Keystone” manually.
6, 16,
28
53
Troubleshooting
Others
The image is dark/too
bright.
The settings for “Brightness,” “Contrast,” and “Lamp Mode”
affect brightness of the image. Check if the value is
appropriate.
19, 26
The image will be dark when the lamp is burnt out. Check
“Lamp Timer,” and replace the lamp with a new one if
necessary.
29, 54
“With Static Signal” is set to “On.” 26
During picture muting, the lamp is dimmed to reduce power
consumption.
26
When video signal is not input, the lamp is dimmed to reduce
power consumption.
–
The image becomes
darker or brighter.
When the lamp is dimmed for a long time, brightness may
increase temporarily, but this is not malfunction.
–
When the “Lamp Mode” is set to “Auto,” the luminance of the
lamp changes according to the input image.
26
The image is not clear. Check if the projector is in focus. 14
The picture will not be clear if condensation has accumulated
on the lens. In this case, let the projector sit for about two
hours with the power on.
–
The image is noisy. Check if the connecting cable is connected to the external
equipment properly.
8
No sound. Check that the connecting cables between the projector and
external video or audio equipment are securely connected.
8
Check if the external audio equipment is set properly. –
Audio is not output if “Speaker” is set to “Off.” 24
Audio is not output if audio muting is activated. 6
Check if the volume is not set to minimum. 6, 24
The remote commander
does not work.
Check if the batteries are installed correctly. –
Check if the batteries are not exhausted. –
The fan is noisy. The sound from the fan is often greater than normal to cool the
lamp, etc. in the following cases.
• “Lamp Mode” is set to “High.”
• The unit is used at a high altitude. “High Altitude Mode” is
set to “On.”
• The unit is used in the location where the temperature is high.
26, 28
If the ventilation holes are blocked, the internal temperature of
the projector rises and the fan noise becomes larger.
4, 4
Symptoms Remedy Page
54 Replacing the Lamp
Replacing the Lamp
Replace the lamp with a new one if a
message displayed on the projected image
(page 51).
Use an LMP-E212 projector lamp (not
supplied) for replacement.
• The lamp remains hot after the projector is
turned off. If you touch the lamp, you may
burn your finger. When you replace the
lamp, wait for at least an hour after
turning off the projector for the lamp to
cool sufficiently.
• Do not allow any metallic or inflammable
objects into the lamp replacement slot after
removing the lamp, otherwise it may cause
electrical shock or fire. Do not put your
hands into the slot.
•If the lamp breaks, contact qualified
Sony personnel. Do not replace the lamp
yourself.
• When removing the lamp, be sure to pull it
out straight, by holding the designated
location. If you touch a part of the lamp other
than the designated location, you may be
burned or injured. If you pull out the lamp
while the projector is tilted, the pieces may
scatter if the lamp breaks any may cause
injury.
1Turn off the projector, and disconnect
the AC power cord from a wall outlet.
2When the lamp has cooled
sufficiently, open the lamp cover by
loosening 1 screw.
3Loosen the 2 screws on the lamp (1)
then pull out the lamp by its grab (2).
Caution
Notes
Grab
55
Replacing the Lamp
Others
4Insert the new lamp all the way in until
it is securely in place (1). Tighten the
2 screws (2).
The power will not turn on if the lamp is
not secured properly.
5Close the lamp cover and tighten the
1 screw.
6Connect the AC power cord to a wall
outlet and turn on the projector.
7Reset the lamp timer for notification of
the next replacement time.
Select “Lamp Timer Reset” on the
Function menu then press the ENTER
key. When a message appears, select
“Yes” to reset the lamp timer (page 24).
Note
Caution
For the customers in the
U.S.A. and Canada
Lamp contains
mercury. Dispose according
to applicable local, state/
province and federal laws.
For additional information,
see www.sony.com/mercury
56 Cleaning the Air Filter
Cleaning the Air
Filter
When a message appears on the projected
image indicating time for a filter cleaning,
clean the air filter (pages 50, 51).
If the dust cannot be removed from the air
filter even after cleaning, replace the air filter
with a new one. For details on a new air
filter, consult with qualified Sony personnel.
If you continue to use the projector even
after the message is displayed, dust may
accumulate, clogging it. As a result, the
temperature may rise inside the unit,
leading to a possible malfunction or fire.
1Turn off the projector, and disconnect
the AC power cord from the AC outlet.
2Slide out and remove the air filter
cover from the unit.
3Clean the air filter with a vacuum
cleaner.
Pull out and remove the air filter cover,
and clean it with a vacuum cleaner.
4Reattach the air filter cover to the unit.
Be sure to attach the air filter firmly,
otherwise it may cause a malfunction.
Caution
Air filter cover
Note
Claws
57
Specifications
Others
Specifications
Items Descriptions
Projection system 3 LCD system
Display device Effective display
size
VPL-SW235/SW225: 0.59 inch (15.0 mm), 3 plate
panels, Aspect ratio 16:10
VPL-SX236/SX235/SX226/SX225: 0.63 inch
(16.0 mm), 3 plate panels, Aspect ratio 4:3
Effective picture
elements
VPL-SW235/SW225: 3,072,000 pixels (1,280 × 800
pixels, 3 plate panels)
VPL-SX236/SX235/SX226/SX225: 2,359,296 pixels
(1,024 × 768 pixels, 3 plate panels)
Projection lens Focus Manual
Light source High-pressure mercury lamp, 210 W type
Projected image
size
VPL-SW235/SW225: 57 inches to 103 inches (1.45 m to
2.62 m)
VPL-SX236/SX235/SX226/SX225 : 60 inches to
110 inches (1.52 m to 2.79 m)
Luminous flux
(Brightness)
VPL-SW235:3,000 lm
VPL-SW225:2,600 lm
VPL-SX236:3,300 lm
VPL-SX235:3,200 lm
VPL-SX226:2,800 lm
VPL-SX225:2,700 lm
(when “Lamp Mode” is set to “High”)
Speaker 16 W × 1 (monaural)
Applicable
scanning
frequency*1
Horizontal: 15 kHz to 92 kHz, Vertical: 48 Hz to 92 Hz
Resolution*1 When a computer
signal is input
Maximum display resolution: 1,600 × 1,200 pixels
(resize)
Panel display resolution:
VPL-SW235/SW225: 1,280 × 800 pixels
VPL-SX236/SX235/SX226/SX225: 1,024 × 768 pixels
When a video
signal is input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p,
576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/60p, 1080/50p
Color system NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
58 Specifications
INPUT OUTPUT
(Computer/video)
INPUT A RGB/YPBPR input terminal: Mini D-sub 15-pin
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated, RGB/PBPR: 0.7 Vp-p ± 2 dB,
75 ohms terminated, Sync signal: TTL level high
impedance, positive/negative
Audio input terminal: Stereo mini jack, rated input 500
mVrms, input impedance more than 47 kohms
INPUT B RGB input terminal: Mini D-sub 15-pin female, RGB:
0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL
level high impedance, positive/negative
Audio input terminal: Stereo mini jack, rated input 500
mVrms, input impedance more than 47 kohms
INPUT C HDMI input terminal: HDMI 19-pin, HDCP, HDMI
audio support
S VIDEO
(SVIDEO IN)
S video input terminal: Mini DIN 4-pin, Y: 1 Vp-p
± 2dB, sync negative, 75 ohms terminated, C: (burst
signal) 0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB,
75 ohms terminated
Audio input terminal: Phono jack × 2, rated input 500
mVrms, input impedance more than 47 kohms
VIDEO (VIDEO
IN)
Video input terminal: Pin jack, 1 Vp-p ± 2 dB, sync
negative, 75 ohms terminated
Audio input terminal: Shared with S VIDEO
OUTPUT MONITOR output terminal: Mini D-sub 15-pin
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated, RGB/PBPR: 0.7 Vp-p ± 2 dB,
75 ohms terminated, Sync signal: HD, VD 4 V (open),
1 Vp-p (75 ohms), positive/negative
Audio output terminal: Stereo mini jack, 1 Vrms
(maximum volume, when inputting 500 mVrms), output
impedance 5 kohms
Other terminals RS-232C terminal: D-Sub 9-pin male
LAN terminal: RJ45, 10BASE-T/100BASE-TX
USB terminal: Type A
USB terminal: Type B
Microphone input: Mini jack
Operating
temperature/
Operating
humidity
0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no
condensation)
Storage
temperature/
Storage humidity
–10 °C to +60 °C (14 °F to 140 °F)/20% to 80% (no
condensation)
Power
requirements
100 V to 240 V AC, 3.2 A to 1.3 A, 50/60 Hz
Items Descriptions
59
Specifications
Others
*1: For details, refer to “Acceptable Input Signals” on page 63.
*2: Information on accessories in this manual is current as of January 2017.
Power
consumption
VPL-SW235:
100 V to 120 V AC: 315 W
220 V to 240 V AC: 302 W
VPL-SW225:
100 V to 120 V AC: 291 W
220 V to 240 V AC: 281 W
VPL-SX236/SX235:
100 V to 120 V AC: 308 W
220 V to 240 V AC: 297 W
VPL-SX226/SX225:
100 V to 120 V AC: 305 W
220 V to 240 V AC: 294 W
Power
consumption
(standby mode)
AC 100 V to
120 V
0.50 W (when “Standby Mode” is set to “Low”)
AC 220 V to
240 V
0.50 W (when “Standby Mode” is set to “Low”)
Power
consumption
(networked
standby mode)
AC 100 V to
120 V
5.0 W (LAN)
5.6 W (optional WLAN module)
5.8 W (all terminals and networks connected)
(when “Standby Mode” is set to “Standard”)
AC 220 V to
240 V
5.3 W (LAN)
5.9 W (optional WLAN module)
6.0 W (all terminals and networks connected)
(when “Standby Mode” is set to “Standard”)
Heat dissipation VPL-SW235:
100 V AC: 1,075 BTU/h
240 V AC: 1,031 BTU/h
VPL-SW225:
100 V AC: 993 BTU/h
240 V AC: 959 BTU/h
VPL-SX236/SX235:
100 V AC: 1,051 BTU/h
240 V AC: 1,014 BTU/h
VPL-SX226/SX225:
100 V AC: 1,041 BTU/h
240 V AC: 1,004 BTU/h
Standard
dimensions
(W/H/D)
Approx. 365 × 147.8 × 310 mm (14 3/8 × 5 13/16 ×
12 7/32 inches)
Approx. 365 × 138.7 × 310 mm (14 3/8 × 5 15/32 ×
12 7/32 inches) (without projecting parts)
Mass Approx. 4.4 kg (9.7 lb)
Supplied
accessories
See “Checking the Supplied Accessories” in the supplied
Quick Reference Manual.
Optional
accessories*2 *3 Projector Lamp LMP-E212 (for replacement)
USB wireless LAN module IFU-WLM3
Items Descriptions
Notes
60 Specifications
*3: Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
Design and specifications of the unit, including the optional accessories, are subject to change
without notice.
61
Specifications
Others
Pin assignment
HDMI terminal (HDMI, female)
RGB input terminal (Mini D-sub
15-pin, female)
RS-232C terminal (D-Sub 9-pin, male)
1 T.M.D.S.
Data2+
11 T.M.D.S.
Clock Shield
2 T.M.D.S.
Data2 Shield
12 T.M.D.S.
Clock –
3 T.M.D.S.
Data2 –
13 N.C.
4 T.M.D.S.
Data1+
14 RESERVED
(N.C.)
5 T.M.D.S.
Data1 Shield
15 SCL
6 T.M.D.S.
Data1 –
16 SDA
7 T.M.D.S.
Data0+
17 DDC GND
8 T.M.D.S.
Data0 Shield
18 +5V Power
9 T.M.D.S.
Data0 –
19 Hot Plug
Detect
10 T.M.D.S.
Clock+
1
2
19
18
1 Video input
(red) R
9 Power supply
input for DDC
2 Video input
(green) G
10 GND
3 Video input
(blue) B
11 GND
4 GND 12 DDC/SDA
5 RESERVE 13 Horizontal sync
signal
6 GND (R) 14 Vertical sync
signal
7 GND (G) 15 DDC/SCL
8 GND (B)
1NC 6NC
2RXDA 7RTS
3TXDA 8CTS
4DTR 9NC
5 GND
51
9
6
62 Specifications
USB terminal (Type A, female)
USB terminal (Type B, female)
1V
BUS (4.4 - 5.25 V)
2 Data–
3 Data+
4Ground
1VCC (+5 V)
2 Data–
3 Data+
4Ground
63
Specifications
Others
Acceptable Input Signals
*1
Computer signal
Digital TV signal
*4
Analog TV signal
*1: • When a signal other than the signals listed
in table is input, the picture may not be
displayed properly.
• An input signal meant for screen
resolution different from that of the panel
will not be displayed in its original
resolution. Text and lines may be uneven.
*2: This is identified as a movie delivery signal
of 720/60p.
*3: This is identified as a movie delivery signal
of 1080/60p.
*4: Only G with sync/Y is supported.
Resolution fH[kHz]/
fV[Hz]
Input terminal
RGB/
YPBPRHDMI RGB
640 × 350 31.5/70 zz
37.9/85 zz
640 × 400 31.5/70 zz
37.9/85 zz
640 × 480 31.5/60 zzz
35.0/67 zz
37.9/73 zz
37.5/75 zz
43.3/85 zz
800 × 600 35.2/56 zz
37.9/60 zzz
48.1/72 zz
46.9/75 zz
53.7/85 zz
832 × 624 49.7/75 zz
1024 × 768 48.4/60 zzz
56.5/70 zz
60.0/75 zz
68.7/85 zz
1152 × 864 64.0/70 zz
67.5/75 zz
77.5/85 zz
1152 × 900 61.8/66 zz
1280 × 960 60.0/60 zzz
1280 × 1024 64.0/60 zzz
80.0/75 zz
91.1/85 zz
1400 × 1050 65.3/60 zzz
1600 × 1200 75.0/60 zzz
1280 × 768 47.8/60 z
1280 × 720 45.0/60 zz*2 z
1920 × 1080 67.5/60 z*3
1366 × 768 47.7/60 zzz
1440 × 900 55.9/60 zzz
1280 × 800 49.7/60 zzz
Signal fV[Hz]
Input terminal
RGB/
YPBPRHDMI
480i 60
zz
576i 50
zz
480p 60
zz
576p 50
zz
1080i 60
zz
1080i 50
zz
720p 60
zz
720p 50
zz
1080p 60
z
1080p 50
z
Signal fV[Hz] Input terminal
VIDEO/S VIDEO
NTSC 60
z
PAL /SECAM 50
z
Notes
Resolution fH[kHz]/
fV[Hz]
Input terminal
RGB/
YPBPRHDMI RGB
64 Projection Distance
Projection Distance
The projection distance is the distance between the front of the lens and the surface of the
projected image. The following describes the projection distance and height from the center of
the lens to edge of screen by each projected screen size. Height H is the height from the bottom
of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line
from the center of the lens to projected image surface).
Floor Installation
Projection distance L
Center of lens
Height H from
center of lens
to edge of
screen
Projected
image
A
65
Projection Distance
Others
Projection distance table (VPL-SW235/SW225)
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1 (Projection distance L) Unit: m (inches)
Expression#2 (Height H from center of lens to edge of screen)
Projected image size Projection
Distance L
Height H from center of lens to edge of
screen
Diagonal D Width × Height Minimum Projection
Distance L
Maximum Projection
Distance L
60inch (1.52m) 1.29 × 0.81
(51 × 32)
0.59 (23) 0.08 (3) 0.08 (3)
70inch (1.78m) 1.51 × 0.94
(59 × 37)
0.69 (27) 0.09 (4) 0.09 (4)
80inch (2.03m) 1.72 × 1.08
(68 × 42)
0.79 (31) 0.11 (4) 0.11 (4)
90inch (2.29m) 1.94 × 1.21
(76 × 48)
0.89 (35) 0.12 (5) 0.12 (5)
100inch (2.54m) 2.15 × 1.35
(85 × 53)
1.00 (39) 0.13 (5) 0.13 (5)
Minimum Projection Distance L Maximum Projection Distance L
L=0.010230 × D-0.0270
(L=0.402756 × D-1.0630)
L=0.010230 × D-0.0270
(L=0.402756 × D-1.0630)
Height H from center of lens to edge of screen
Minimum Projection Distance L Maximum Projection Distance L
H=0.00135 × D+0.00000
(H=0.05300 × D+0.00000)
H=0.00135 × D+0.00000
(H=0.05300 × D+0.00000)
66 Projection Distance
Projection distance table (VPL-SX236/SX235/SX226/SX225)
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1 (Projection distance L) Unit: m (inches)
Expression#2 (Height H from center of lens to edge of screen)
Projected image size Projection
Distance L
Height H from center of lens to edge of
screen
Diagonal D Width × Height Minimum Projection
Distance L
Maximum Projection
Distance L
60inch (1.52m) 1.22 × 0.91
(48 × 36)
0.55 (22) 0.00 (0) 0.00 (0)
70inch (1.78m) 1.42 × 1.07
(56 × 42)
0.65 (26) 0.00 (0) 0.00 (0)
80inch (2.03m) 1.63 × 1.22
(64 × 48)
0.74 (29) 0.00 (0) 0.00 (0)
90inch (2.29m) 1.83 × 1.37
(72 × 54)
0.84 (33) 0.00 (0) 0.00 (0)
110inch (2.79m) 2.24 × 1.68
(88 × 66)
1.03 (41) 0.00 (0) 0.00 (0)
Minimum Projection Distance L Maximum Projection Distance L
L=0.009668 × D-0.0285
(L=0.380613 × D-1.1236)
L=0.009668 × D-0.0285
(L=0.380613 × D-1.1236)
Height H from center of lens to edge of screen
Minimum Projection Distance L Maximum Projection Distance L
H=0.00000 × D+0.00000
(H=0.00000 × D+0.00000)
H=0.00000 × D+0.00000
(H=0.00000 × D+0.00000)
67
Projection Distance
Others
Ceiling Installation
Center of lens
Height H from
center of lens to
edge of screen
Projection distance L
Projected
image
A
Top si de
68 Projection Distance
Projection distance table (VPL-SW235/SW225)
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1 (Projection distance L) Unit: m (inches)
Expression#2 (Height H from center of lens to edge of screen)
For ceiling installation, consult with a ceiling mount manufacturer, and use a ceiling mount specified
for use with this projector by the manufacturer.
Projected image size Projection
Distance L
Height H from center of lens to edge of
screen
Diagonal D Width × Height Minimum Projection
Distance L
Maximum Projection
Distance L
60inch (1.52m) 1.29 × 0.81
(51 × 32)
0.59 (23) 0.08 (3) 0.08 (3)
70inch (1.78m) 1.51 × 0.94
(59 × 37)
0.69 (27) 0.09 (4) 0.09 (4)
80inch (2.03m) 1.72 × 1.08
(68 × 42)
0.79 (31) 0.11 (4) 0.11 (4)
90inch (2.29m) 1.94 × 1.21
(76 × 48)
0.89 (35) 0.12 (5) 0.12 (5)
100inch (2.54m) 2.15 × 1.35
(85 × 53)
1.00 (39) 0.13 (5) 0.13 (5)
Minimum Projection Distance L Maximum Projection Distance L
L=0.010230 × D-0.0270
(L=0.402756 × D-1.0630)
L=0.010230 × D-0.0270
(L=0.402756 × D-1.0630)
Height H from center of lens to edge of screen
Minimum Projection Distance L Maximum Projection Distance L
H=0.00135 × D+0.00000
(H=0.05300 × D+0.00000)
H=0.00135 × D+0.00000
(H=0.05300 × D+0.00000)
Note
69
Projection Distance
Others
Projection distance table (VPL-SX236/SX235/SX226/SX225)
Unit: m (inches)
Projection distance formula
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1 (Projection distance L) Unit: m (inches)
Expression#2 (Height H from center of lens to edge of screen)
For ceiling installation, consult with a ceiling mount manufacturer, and use a ceiling mount specified
for use with this projector by the manufacturer.
Projected image size Projection
Distance L
Height H from center of lens to edge of
screen
Diagonal D Width × Height Minimum Projection
Distance L
Maximum Projection
Distance L
60inch (1.52m) 1.22 × 0.91
(48 × 36)
0.55 (22) 0.00 (0) 0.00 (0)
70inch (1.78m) 1.42 × 1.07
(56 × 42)
0.65 (26) 0.00 (0) 0.00 (0)
80inch (2.03m) 1.63 × 1.22
(64 × 48)
0.74 (29) 0.00 (0) 0.00 (0)
90inch (2.29m) 1.83 × 1.37
(72 × 54)
0.84 (33) 0.00 (0) 0.00 (0)
110inch (2.79m) 2.24 × 1.68
(88 × 66)
1.03 (41) 0.00 (0) 0.00 (0)
Minimum Projection Distance L Maximum Projection Distance L
L=0.009668 × D-0.0285
(L=0.380613 × D-1.1236)
L=0.009668 × D-0.0285
(L=0.380613 × D-1.1236)
Height H from center of lens to edge of screen
Minimum Projection Distance L Maximum Projection Distance L
H=0.00000 × D+0.00000
(H=0.00000 × D+0.00000)
H=0.00000 × D+0.00000
(H=0.00000 × D+0.00000)
Note
70 Dimensions
Dimensions
Top
Unit: mm (inches)
310 (12 7/32)
365 (14 3/8)
Center of Lens
85(11/32)
13.94 (9/16)
Front
Unit: mm (inches)
147.8 (5
13
/
16
)
138.7 (5
15
/
32
)
85.2 (3
11
/
32
)
Center of Lens
71
Dimensions
Others
Bottom
Unit: mm (inches)
233.5 (9 3/16)38.5
(1 17/32)
286 (11 1/4 )
265 (10 7/16)
160.5 (6 5/16)
85.5 (3 3/8)
31.8
(1 1/4)
97.5 (3 27/32)
85.5 (3 3/8)
31.8
(1 1/4)
57.4
(2 1/4)
45.3
(1 25/32)
13.5 (17/32)
Center of Lens
14 (9/16)
104.3 (4 3/32)
220.8 (8 11/16)
0.8 (1/32)
14 (9/16)
Holes for ceiling
mount (M4,
Depth 8 (5/16))
72 END USER LICENSE AGREEMENT
END USER LICENSE
AGREEMENT
IMPORTANT:
BEFORE USING THE SOFTWARE,
PLEASE READ THIS END USER
LICENSE AGREEMENT (“EULA”)
CAREFULLY. BY USING THE
SOFTWARE YOU ARE ACCEPTING
THE TERMS OF THIS EULA. IF YOU DO
NOT ACCEPT THE TERMS OF THIS
EULA, YOU MAY NOT USE THE
SOFTWARE.
This EULA is a legal agreement between
you and Sony Corporation (“SONY”). This
EULA governs your rights and obligations
regarding the software of SONY and/or its
third party licensors (including SONY’s
affiliates) and their respective affiliates
(collectively, the “THIRD-PARTY
SUPPLIERS”), together with any updates/
upgrades provided by SONY, any printed,
on-line or other electronic documentation
for such software, and any data files created
by operation of such software (collectively,
the “SOFTWARE”).
Notwithstanding the foregoing, any software
in the SOFTWARE having a separate end
user license agreement (including, but not
limited to, GNU General Public license and
Lesser/Library General Public License)
shall be covered by such applicable separate
end user license agreement in lieu of the
terms of this EULA to the extent required by
such separate end user license agreement
(“EXCLUDED SOFTWARE”).
SOFTWARE LICENSE
The SOFTWARE is licensed, not sold. The
SOFTWARE is protected by copyright and
other intellectual property laws and
international treaties.
COPYRIGHT
All right and title in and to the SOFTWARE
(including, but not limited to, any images,
photographs, animation, video, audio,
music, text and “applets” incorporated into
the SOFTWARE) is owned by SONY or one
or more of the THIRD-PARTY
SUPPLIERS.
GRANT OF LICENSE
SONY grants you a limited license to use the
SOFTWARE solely in connection with your
compatible device (“DEVICE”) and only for
your individual, non-commercial use.
SONY and the THIRD-PARTY
SUPPLIERS expressly reserve all rights,
title and interest (including, but not limited
to, all intellectual property rights) in and to
the SOFTWARE that this EULA does not
specifically grant to you.
REQUIREMENTS AND LIMITATIONS
You may not copy, publish, adapt,
redistribute, attempt to derive source code,
modify, reverse engineer, decompile, or
disassemble any of the SOFTWARE,
whether in whole or in part, or create any
derivative works from or of the SOFTWARE
unless such derivative works are
intentionally facilitated by the SOFTWARE.
You may not modify or tamper with any
digital rights management functionality of
the SOFTWARE. You may not bypass,
modify, defeat or circumvent any of the
functions or protections of the SOFTWARE
or any mechanisms operatively linked to the
SOFTWARE. You may not separate any
individual component of the SOFTWARE
for use on more than one DEVICE unless
expressly authorized to do so by SONY. You
may not remove, alter, cover or deface any
trademarks or notices on the SOFTWARE.
You may not share, distribute, rent, lease,
sublicense, assign, transfer or sell the
SOFTWARE. The software, network
services or other products other than
SOFTWARE upon which the
SOFTWARE’S performance depends might
be interrupted or discontinued at the
discretion of the suppliers (software
suppliers, service suppliers, or SONY).
SONY and such suppliers do not warrant
that the SOFTWARE, network services,
contents or other products will continue to
be available, or will operate without
interruption or modification.
73
END USER LICENSE AGREEMENT
Others
EXCLUDED SOFTWARE AND OPEN
SOURCE COMPONENTS
Notwithstanding the foregoing limited
license grant, you acknowledge that the
SOFTWARE may include EXCLUDED
SOFTWARE. Certain EXCLUDED
SOFTWARE may be covered by open
source software licenses (“Open Source
Components”), which means any software
licenses approved as open source licenses by
the Open Source Initiative or any
substantially similar licenses, including but
not limited to any license that, as a condition
of distribution of the software licensed under
such license, requires that the distributor
make the software available in source code
format. If and to the extent disclosure is
required, please visit
http://oss.sony.net/Products/Linux or other
SONY-designated web site for a list of
applicable OPEN SOURCE
COMPONENTS included in the
SOFTWARE from time to time, and the
applicable terms and conditions governing
its use. Such terms and conditions may be
changed by the applicable third party at any
time without liability to you. To the extent
required by the licenses covering
EXCLUDED SOFTWARE, the terms of
such licenses will apply in lieu of the terms
of this EULA. To the extent the terms of the
licenses applicable to EXCLUDED
SOFTWARE prohibit any of the restrictions
in this EULA with respect to such
EXCLUDED SOFTWARE, such
restrictions will not apply to such
EXCLUDED SOFTWARE. To the extent
the terms of the licenses applicable to Open
Source Components require SONY to make
an offer to provide source code in connection
with the SOFTWARE, such offer is hereby
made.
USE OF SOFTWARE WITH
COPYRIGHTED MATERIALS
The SOFTWARE may be capable of being
used by you to view, store, process and/or
use content created by you and/or third
parties. Such content may be protected by
copyright, other intellectual property laws,
and/or agreements. You agree to use the
SOFTWARE only in compliance with all
such laws and agreements that apply to such
content. You acknowledge and agree that
SONY may take appropriate measures to
protect the copyright of content stored,
processed or used by the SOFTWARE. Such
measures include, but are not limited to,
counting the frequency of your backup and
restoration through certain SOFTWARE
features, refusal to accept your request to
enable restoration of data, and termination of
this EULA in the event of your illegitimate
use of the SOFTWARE.
CONTENT SERVICE
PLEASE ALSO NOTE THAT THE
SOFTWARE MAY BE DESIGNED TO BE
USED WITH CONTENT AVAILABLE
THROUGH ONE OR MORE CONTENT
SERVICES (“CONTENT SERVICE”). USE
OF THE SERVICE AND THAT CONTENT
IS SUBJECT TO THE TERMS OF
SERVICE OF THAT CONTENT
SERVICE. IF YOU DECLINE TO
ACCEPT THOSE TERMS, YOUR USE OF
THE SOFTWARE WILL BE LIMITED.
You acknowledge and agree that certain
content and services available through the
SOFTWARE may be provided by third
parties over which SONY has no control.
USE OF THE CONTENT SERVICE
REQUIRES AN INTERNET
CONNECTION. THE CONTENT
SERVICE MAY BE DISCONTINUED AT
ANY TIME.
INTERNET CONNECTIVITY AND
THIRD PARTY SERVICES
You acknowledge and agree that access to
certain SOFTWARE features may require an
Internet connection for which you are solely
responsible. Further, you are solely
responsible for payment of any third party
fees associated with your Internet
connection, including but not limited to
Internet service provider or airtime charges.
Operation of the SOFTWARE may be
limited or restricted depending on the
capabilities, bandwidth or technical
limitations of your Internet connection and
service. The provision, quality and security
of such Internet connectivity are the sole
responsibility of the third party providing
such service.
74 END USER LICENSE AGREEMENT
EXPORT AND OTHER REGULATIONS
You agree to comply with all applicable
export and re-export restrictions and
regulations of the area or country in which
you reside, and not to transfer, or authorize
the transfer, of the SOFTWARE to a
prohibited country or otherwise in violation
of any such restrictions or regulations.
HIGH RISK ACTIVITIES
The SOFTWARE is not fault-tolerant and is
not designed, manufactured or intended for
use or resale as on-line control equipment in
hazardous environments requiring fail-safe
performance, such as in the operation of
nuclear facilities, aircraft navigation or
communication systems, air traffic control,
direct life support machines, or weapons
systems, in which the failure of the
SOFTWARE could lead to death, personal
injury, or severe physical or environmental
damage (“HIGH RISK ACTIVITIES”).
SONY, each of the THIRD-PARTY
SUPPLIERS, and each of their respective
affiliates specifically disclaim any express or
implied warranty, duty or condition of
fitness for HIGH RISK ACTIVITIES.
EXCLUSION OF WARRANTY ON
SOFTWARE
You acknowledge and agree that use of the
SOFTWARE is at your sole risk and that you
are responsible for use of the SOFTWARE.
The SOFTWARE is provided “AS IS,”
without warranty, duty or condition of any
kind.
SONY AND EACH OF THE THIRD-
PARTY SUPPLIERS (for purposes of this
Section, SONY and each of the THIRD-
PARTY SUPPLIERS shall be collectively
referred to as “SONY”) EXPRESSLY
DISCLAIM ALL WARRANTIES, DUTIES
OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED
WARRANTIES OF
MERCHANTABILITY,
NONINFRINGEMENT AND FITNESS
FOR A PARTICULAR PURPOSE. SONY
DOES NOT WARRANT OR MAKE ANY
CONDITIONS OR REPRESENTATIONS
(A) THAT THE FUNCTIONS
CONTAINED IN ANY OF THE
SOFTWARE WILL MEET YOUR
REQUIREMENTS OR THAT THEY WILL
BE UPDATED, (B) THAT THE
OPERATION OF ANY OF THE
SOFTWARE WILL BE CORRECT OR
ERROR-FREE OR THAT ANY DEFECTS
WILL BE CORRECTED, (C) THAT THE
SOFTWARE WILL NOT DAMAGE ANY
OTHER SOFTWARE, HARDWARE OR
DATA, (D) THAT ANY SOFTWARE,
NETWORK SERVICES (INCLUDING
THE INTERNET) OR PRODUCTS
(OTHER THAN THE SOFTWARE) UPON
WHICH THE SOFTWARE’S
PERFORMANCE DEPENDS WILL
CONTINUE TO BE AVAILABLE,
UNINTERRUPTED OR UNMODIFIED,
AND (E) REGARDING THE USE OR THE
RESULTS OF THE USE OF THE
SOFTWARE IN TERMS OF ITS
CORRECTNESS, ACCURACY,
RELIABILITY, OR OTHERWISE.
NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY
SONY OR AN AUTHORIZED
REPRESENTATIVE OF SONY SHALL
CREATE A WARRANTY, DUTY OR
CONDITION OR IN ANY WAY
INCREASE THE SCOPE OF THIS
WARRANTY. SHOULD THE SOFTWARE
PROVE DEFECTIVE YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
SOME JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THESE
EXCLUSIONS MAY NOT APPLY TO
YOU.
LIMITATION OF LIABILITY
SONY AND EACH OF THE THIRD-
PARTY SUPPLIERS (for purposes of this
Section, SONY and each of the THIRD-
PARTY SUPPLIERS shall be collectively
referred to as “SONY”) SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT
LIABILITY OR UNDER ANY OTHER
75
END USER LICENSE AGREEMENT
Others
LEGAL THEORY RELATED TO THE
SOFTWARE, INCLUDING, BUT NOT
LIMITED TO, ANY DAMAGES ARISING
OUT OF LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF
USE OF THE SOFTWARE OR ANY
ASSOCIATED HARDWARE, DOWN
TIME AND USER’S TIME, EVEN IF ANY
OF THEM HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH
DAMAGES. IN ANY CASE, EACH AND
ALL OF THEIR AGGREGATE
LIABILITY UNDER ANY PROVISION
OF THIS EULA SHALL BE LIMITED TO
THE AMOUNT ACTUALLY PAID FOR
THE PRODUCT. SOME JURISDICTIONS
DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE
ABOVE EXCLUSION OR LIMITATION
MAY NOT APPLY TO YOU.
CONSENT TO USE OF NON-
PERSONAL INFORMATION,
LOCATION DATA, DATA SECURITY
You acknowledge and agree that SONY and
its affiliates, partners and agents may read,
collect, transfer, process and store certain
information collected from the
SOFTWARE, including but not limited to
information about (i) the SOFTWARE and
(ii) the software applications, contents and
peripheral devices that interact with your
DEVICE and the SOFTWARE
(“Information”). Information includes, but is
not limited to: (1) unique identifiers relating
to your DEVICE and its components; (2)
performance of the DEVICE, the
SOFTWARE and their components; (3)
configurations of your DEVICE, the
SOFTWARE and the software applications,
contents and peripheral devices that interact
with the DEVICE and the SOFTWARE; (4)
use and frequency of use of the functions of
(x) the SOFTWARE, and (y) the software
applications, contents and peripheral devices
that interact with the SOFTWARE; and (5)
location data, as indicated below. SONY and
its affiliates, partners and agents may use
and disclose Information subject to
applicable laws in order to improve its
products and services or to provide products
or services to you. Such uses include, but are
not limited to: (a) administering the
functionalities of the SOFTWARE; (b) to
improve, service, update or upgrade the
SOFTWARE; (c) improving, developing and
enhancing the current and future products
and services of SONY and other parties; (d)
to provide you with information about the
products and services offered by SONY and
other parties; (e) complying with applicable
laws or regulations; and (f) to the extent
offered, providing you with location-based
services of SONY and other parties, as
indicated below. In addition, SONY retains
the right to use Information to protect itself
and third parties from illegal, criminal or
harmful conduct.
Certain services available through the
SOFTWARE may rely upon location
information, including, but not limited to,
the geographic location of the DEVICE. You
acknowledge that for the purpose of
providing such services, SONY, the THIRD-
PARTY SUPPLIERS or their partners may
collect, archive, process and use such
location data, and that such services are
governed by the privacy policies of SONY or
such third party. By using any such services,
you agree that you have reviewed the privacy
policies applicable to such services and
consent to such activities.
SONY, its affiliates, partners and agents will
not intentionally use Information to
personally identify the owner or user of the
SOFTWARE without your knowledge or
consent. Any use of Information will be in
accordance with the privacy policies of
SONY or such third party. Please contact
applicable contact address of each area or
country for SONY’s current privacy policy.
Please contact applicable third parties for
privacy policies relating to personally
identifiable and other information you
provide when you use or access third party
software or services.
Information may be processed, stored or
transferred to SONY, its affiliates or agents
which are located in countries outside of
your country of residence. Data protection
and information privacy laws in certain
76 END USER LICENSE AGREEMENT
countries may not offer the same level of
protection as your country of residence and
you may have fewer legal rights in relation to
Information processed and stored in, or
transferred to, such countries. SONY will
use reasonable efforts to take appropriate
technical and organizational steps to prevent
unauthorized access to or disclosure of
Information, but does not warrant it will
eliminate all risk of misuse of such
Information.
AUTOMATIC UPDATE FEATURE
From time to time, SONY or the THIRD-
PARTY SUPPLIERS may automatically
update or otherwise modify the
SOFTWARE, including, but not limited to,
for purposes of enhancement of security
functions, error correction and improvement
of functions, at such time as you interact
with SONY’s or third parties’ servers, or
otherwise. Such updates or modifications
may delete or change the nature of features
or other aspects of the SOFTWARE,
including, but not limited to, functions you
may rely upon. You acknowledge and agree
that such activities may occur at SONY’s
sole discretion and that SONY may
condition continued use of the SOFTWARE
upon your complete installation or
acceptance of such update or modifications.
Any updates/modifications shall be deemed
to be, and shall constitute part of, the
SOFTWARE for purposes of this EULA. By
acceptance of this EULA, you consent to
such update/modification.
ENTIRE AGREEMENT, WAIVER,
SEVERABILITY
This EULA and SONY’s privacy policy,
each as amended and modified from time to
time, together constitute the entire
agreement between you and SONY with
respect to the SOFTWARE. The failure of
SONY to exercise or enforce any right or
provision of this EULA shall not constitute a
waiver of such right or provision. If any part
of this EULA is held invalid, illegal, or
unenforceable, that provision shall be
enforced to the maximum extent permissible
so as to maintain the intent of this EULA,
and the other parts will remain in full force
and effect.
GOVERNING LAW AND
JURISDICTION
The United Nations Convention on
Contracts for the International Sale of Goods
shall not apply to this EULA. This EULA
shall be governed by the laws of Japan,
without regards to conflict of laws
provisions. Any dispute arising out of this
EULA shall be subject to the exclusive
venue of the Tokyo District Court in Japan,
and the parties hereby consent to the venue
and jurisdiction of such courts.
EQUITABLE REMEDIES
Notwithstanding anything contained in this
EULA to the contrary, you acknowledge and
agree that any violation of or non-
compliance with this EULA by you will
cause irreparable harm to SONY, for which
monetary damages would be inadequate,
and you consent to SONY obtaining any
injunctive or equitable relief that SONY
deems necessary or appropriate in such
circumstances. SONY may also take any
legal and technical remedies to prevent
violation of and/or to enforce this EULA,
including, but not limited to, immediate
termination of your use of the SOFTWARE,
if SONY believes in its sole discretion that
you are violating or intend to violate this
EULA. These remedies are in addition to
any other remedies SONY may have at law,
in equity or under contract.
TERMINATION
Without prejudice to any of its other rights,
SONY may terminate this EULA if you fail
to comply with any of its terms. In case of
such termination, you must: (i) cease all use,
and destroy any copies, of the SOFTWARE;
(ii) comply with the requirements in the
section below entitled “Your Account
Responsibilities”.
AMENDMENT
SONY RESERVES THE RIGHT TO
AMEND ANY OF THE TERMS OF THIS
EULA AT ITS SOLE DISCRETION BY
POSTING NOTICE ON A SONY
DESIGNATED WEB SITE, BY EMAIL
NOTIFICATION TO AN EMAIL
ADDRESS PROVIDED BY YOU, BY
PROVIDING NOTICE AS PART OF THE
77
END USER LICENSE AGREEMENT
Others
PROCESS IN WHICH YOU OBTAIN
UPGRADES/UPDATES OR BY ANY
OTHER LEGALLY RECOGNIZABLE
FORM OF NOTICE. If you do not agree to
the amendment, you should promptly
contact SONY for instructions. Your
continued use of the SOFTWARE after the
effective date of any such notice shall be
deemed your agreement to be bound by such
amendment.
THIRD-PARTY BENEFICIARIES
Each THIRD-PARTY SUPPLIER is an
express intended third-party beneficiary of,
and shall have the right to enforce, each
provision of this EULA with respect to the
SOFTWARE of such party.
YOUR ACCOUNT RESPONSIBILITIES
Should you return your DEVICE to its place
of purchase, sell or otherwise transfer your
DEVICE, or if this EULA is terminated, you
are responsible for and must uninstall the
SOFTWARE from the DEVICE and delete
any and all accounts you may have
established on DEVICE or are accessible
through the SOFTWARE. You are solely
responsible for maintaining the
confidentiality of any accounts you have
with SONY OR third parties and any
usernames and passwords associated with
YOUR USE OF the DEVICE.
Should you have any questions concerning
this EULA, you may contact SONY by
writing to SONY at applicable contact
address of each area or country.
Copyright © 2012 Sony Corporation.
78 Index
Index
A
AC IN ........................................................ 5
Acceptable input signal ...........................63
Adjust Signal ........................................... 21
Air filter ...................................................56
Air filter cover/Ventilation holes
(intake) ............................................... 4
APA ........................................................... 6
Aspect ........................................... 6, 20, 22
B
BLANK ..................................................... 6
Brightness ............................................... 19
C
CC Display ..............................................24
Color .......................................................19
Color Temp. ............................................19
Connecting a computer .............................8
Connecting a Video equipment ...............10
Connecting an external monitor and audio
equipment ........................................12
Constant Brightness ................................26
Contrast ...................................................19
Control Key Lock .................................... 25
Control Panel Keys ...................................6
Correcting trapezoidal distortion of the
projected image
(Keystone feature) ....................... 6, 16
D
Digital Zoom .............................................6
E
ECO MODE (Energy-saving mode) .........7
F
fH ............................................................29
Focus .......................................................14
Focus ring ..................................................4
Freeze ........................................................ 6
Front feet (adjustable) .............................15
fV ............................................................29
G
Gamma Mode .......................................... 19
H
H (Horizontal) .........................................21
High Altitude Mode .................................28
Hue ..........................................................19
I
Image Flip ................................................28
Information menu ....................................29
Input ...........................................................5
Installation Attitude .................................28
Installation menu .....................................28
K
Keystone ....................................................6
L
Lamp cover ................................................4
Lamp Timer .............................................29
Lamp Timer Reset ...................................24
LAMP/COVER indicator ....................4, 50
LAN terminal .............................................5
Language .................................................25
Location and function of controls ..............4
M
Main unit ...................................................4
Messages list ............................................51
Model Name ............................................29
MUTING ...................................................6
N
Network Features .....................................30
O
Operation menu .......................................25
Optional accessories ................................59
Output ........................................................5
P
Phase, Pitch, Shift ....................................21
Picture menu ............................................19
Picture mode ............................................19
Pin assignment .........................................61
Projecting an image .................................13
Projector Station for Network
Presentation ......................................40
79
Index
Others
R
Remote commander ...................................6
Remote control receiver ............................4
Replacing the lamp ..................................54
Reset ........................................................19
RS-232C ....................................................5
S
Security bar ...............................................4
Security Lock ......................................4, 25
Selecting an input signal ...........................6
Serial No. .................................................29
Sharpness .................................................19
Signal Type ..............................................29
Smart APA ...............................................24
Speaker ....................................................24
Specifications ..........................................57
Start Up Image ........................................24
Status .......................................................25
T
Terminals ...............................................4, 5
The Connection/Power Menu ..................26
The Function menu ..................................24
The Screen menu .....................................20
Troubleshooting .......................................52
Turn off ................................................6, 17
Turn on ................................................6, 13
U
USB Display ............................................44
USB Media Viewer .................................46
Using a menu ...........................................18
Using the e-mail report Function ............32
V
V Keystone ....................................6, 16, 28
Ventilation holes ........................................4
Volume ......................................................6
W
With No Input ..........................................26
With Static Signal ....................................26
About Trademarks
• Adobe and Adobe Acrobat are trademarks
or registered trademarks of Adobe
Systems Incorporated in the United States
and/or other countries.
• Kensington is a registered trademark of
Kensington Technology Group.
• The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
• Internet Explore is registered trademarks
of Microsoft Corporation in the United
States and/or other countries.
• PJLink is a registered trademark of Japan
Business Machine and Information
System Industries Association.
• AMX is a trademark of AMX Corporation.
• Crestron RoomView is a trademark of
Crestron Corporation.
• Mac and Mac OS are registered
trademarks of Apple Inc. in the U.S. and
other countries.
• All other trademarks and registered
trademarks are trademarks or registered
trademarks of their respective holders. In
this manual, ™ and ® marks are not
specified.
Sony Corporation