StarTech.com ADJPROJCART User Manual
Displayed below is the user manual for ADJPROJCART by StarTech.com which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
Mesures de sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
Misure di sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Assemble this product according to the instructions.
• Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage.
• Weight capacity: 10 kg (22 lb.) per platform.
• Do not allow children to climb on this product, or use this product without
proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Assembling this product is a two-person task. Do not attempt to assemble
this product and install equipment without assistance.
• Before adding equipment to this product, ensure the product has been
properly assembled and installed, and that the product can support the
weight of the added equipment.
• Make sure all of the equipment has been properly installed before adjusting
this product.
• Do not move the cart over cords, cables, or uneven surfaces.
• Before moving the cart, unlock the casters.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
• Viktkapacitet fäste: 10 kg per hylla
• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt.
• Det krävs två personer för att montera produkten. Försök inte montera
produkten och installera utrustning utan hjälp.
• Innan du lägger till utrustning på produkten, se till att produkten är korrekt
monterad, installerad och att produkten klarar av vikten på utrustningen som
iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
du lägger till.
• Se till att all utrustning är korrekt installerad innan du börjar justera
produkten.
• Flytta inte vagnen över kablar eller ojämna ytor.
• Innan du börjar ytta på vagnen, se till att hjulen är upplåsta.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken.
• Gewichtscapaciteit: 10 kg pro regal
• Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten worden
gebruikt.
• Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als u
weerstand voelt tijdens het vastdraaien van de schroeven, stop dan.
• Dit product moet met twee personen in elkaar worden gezet. Probeer dit
product niet zonder hulp in elkaar te zetten en apparatuur te installeren.
• Voordat u apparatuur aan dit product toevoegt, moet u ervoor zorgen dat
u het op de juiste manier in elkaar hebt gezet en geïnstalleerd, en dat het
product het gewicht van de toe te voegen apparatuur kan ondersteunen.
• Zorg dat u de apparatuur goed installeert voordat u met het aanpassen van
dit product begint.
• Rijd de wagen niet over snoeren, kabels of ongelijke oppervlakken.
• Voordat u de wagen gaat verplaatsen, moet u de zwenkwielen ontgrendelen.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解して
から組み立て作業を始めて下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載
重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
• TVマウンタの総耐荷重:10kg棚ごと
• 本製品に小さなお子様が乗って遊ばないようにして下さい。お子様が使用
する際には、適切な監視を怠らないようにして下さい。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• 本製品を組み立てる際、ネジを締めすぎないようにして下さい。ネジを締め
ているうちに手応えを感じたら、締めるのを止めてください。
• 本製品は、二人がかりでの組み立てを想定しています。手助けなしに単独で
組み立てと設置を行わないで下さい。
• 本製品に装置を積載する前に、組み立てと設置が適切に行われたか確認し
て下さい。また、積載する装置の重量に本製品が対応しているか確認して
下さい。
• 転倒注意！モニタが一番高い位置にある状態でカートを動かさないで下さ
い。また、モニタを押してカートを動かすのはやめて下さい。
• コードやケーブルの上、または凹凸のある床面でカートを移動させないで
下さい。
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni.
• Portata massima: 10 kg per ripiano
• Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un’adeguata supervisione.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• Durante l’assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l’operazione.
• L’assemblaggio di questo prodotto richiede la presenza di due persone.
Non tentare di assemblare il prodotto e installare le apparecchiature senza
assistenza.
• Prima di aggiungere altre apparecchiature al prodotto, assicurarsi di averlo
assemblato e installato correttamente e che sia in grado di sostenere il peso
dell’apparecchiatura in questione.
• Assicurarsi di aver installato correttamente tutte le apparecchiature prima di
procedere alla regolazione del prodotto.
• Non far passare il carrello sopra corde, cavi o superci irregolari.
• Prima di procedere allo spostamento del carrello, vericare di aver sbloccato
le rotelle.
vi
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Avertissements
• Assemblez ce produit conformément aux instructions.
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels.
• Capacité de poids : 10 kg par étagère
• N’autorisez pas les enfants à grimper sur ce produit ni à l’utiliser sans
surveillance.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Ne serrez pas trop les vis lors de l’assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer.
• L’assemblage de ce produit nécessite deux personnes. Ne tentez pas
d’assembler le produit et d’installer les équipements sans aide.
• Avant d’ajouter des équipements au produit, vériez que vous l’avez
correctement assemblé et installé, et que le produit peut supporter le poids
des équipements que vous y ajoutez.
• Veillez à installer correctement tous les équipements avant de commencer à
ajuster le produit.
• Ne faites pas rouler le meuble sur des cordons, des câbles ou des surfaces
inégales.
• Avant de déplacer le meuble, veillez à débloquer les roulettes.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Leia todo o manual e certique-se de que entende as instruções antes de
começar a montar e a utilizar este produto.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade.
• Capacidade de carga: 10 kg por prateleira
• Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar.
• Montar este produto é uma tarefa para duas pessoas. Não tentar montar este
produto e instalar o equipamento sem assistência.
vii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Antes de adicionar o equipamento a este produto, certique-se de que o
montou e instalou devidamente e de que o produto pode suportar o peso do
equipamento que está a adicionar ao mesmo.
• Certique-se de que instala devidamente todo o seu equipamento antes de
começar a ajustar este produto.
• Não mova o carro pelos os, cabos ou superfícies irregulares.
• Antes de começar a mover o carro, certique-se de que desbloqueia os
rodízios.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad.
• Capacidad de carga: 10 kg por estante
• No permita que los niños se suban a este producto o que lo utilicen sin la
debida supervisión de un adulto.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si
al apretar los tornillos siente resistencia, no los apriete más.
• Se requieren dos personas para el ensamblaje de este producto. No intente
ensamblar este producto e instalar otros equipos sin la debida asistencia de
otra persona.
• Antes de instalar equipos en este producto, asegúrese de haberlo
ensamblado correctamente, a n de que pueda soportar el peso del equipo
que vaya a instalar.
• Asegúrese de que ha instalado todo el equipo correctamente antes de
efectuar ajustes de este producto.
• No desplace el carrito encima de cables o supercies desniveladas.
• Antes de empezar a mover el carrito, asegúrese de haber desbloqueado
las ruedas. Antes de empezar a mover el carrito, asegúrese de haber
desbloqueado las ruedas.
viii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden
haben.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
• Gewichtskapazität: 10 kg pro regal
• Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt
ohne Aufsicht zu benutzen.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu
fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand
stoßen, stellen Sie das Anziehen ein.
• Die Montage dieses Produkts ist auf die Ausführung von zwei Personen
ausgelegt. Versuchen Sie nicht ohne Hilfe, dieses Produkt zu montieren und
Geräte zu installieren.
• Bevor Sie Geräte zu diesem Produkt hinzufügen, vergewissern Sie sich, dass
Sie es ordnungsgemäß montiert und installiert haben und dass das Produkt
das Gewicht der Geräte, die Sie hinzufügen möchten, tragen kann.
• Sorgen Sie dafür, dass all Ihre Geräte ordentlich installiert sind, bevor Sie
dieses Produkt justieren.
• Bewegen Sie den Wagen nicht über Leitungen, Kabel oder unebenes
Gelände.
• Stellen Sie sicher, dass die Rollen entriegelt sind, bevor Sie den Wagen in
Bewegung setzen.
Table of Contents
Compliance Statements ........................................................................i
Safety Statements ..................................................................................ii
Warning Statements ..............................................................................iii
Product Diagram ....................................................................................1
Front Angle View ....................................................................................................................................... 1
Product Dimensions ..............................................................................2
Front Angle View ....................................................................................................................................... 2
Product Information ..............................................................................3
Package Contents .....................................................................................................................................3
Technical Specications .......................................................................................................................... 5
Requirements .........................................................................................5
Installation ..............................................................................................6
Attach the Base .......................................................................................................................................... 6
Attach the Casters .....................................................................................................................................7
Attach the Support Pole ......................................................................................................................... 8
Attach the Laptop Platform ................................................................................................................... 9
Attach the Knobs ....................................................................................................................................... 10
Attach the Mounting Brackets .............................................................................................................11
.........................................................................................................................................................................
......................................................................................................................................................................... 11
Attach the Projector Platform ............................................................................................................... 12
Operation ................................................................................................13
Move the Mobile Projector Cart ...........................................................................................................13
Adjust the Height of the Projector Platform ....................................................................................13
Tilt the Projector Platform ...................................................................................................................... 14
Cable Management ..................................................................................................................................14
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front Angle View
Projector
Platform
Base Cross
Member
Laptop
Platform
Support Pole
Knobs
Casters
Base
Feet
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Front Angle View
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Projector
Platform
Qty: 1
Laptop Platform
Qty: 1
Knobs
Qty: 3
Support Pole
Qty: 1
Base Feet
Qty: 2
Base Cross
Member
Qty: 1
Cable Clips
Qty: 2
Type One
Washers
Qty: 9
Type Two Washer
Qty: 1
Nuts
Qty: 8
Casters without
Brakes
Qty: 2
Casters with
Brakes
Qty: 2
4
M6 x 65mm Bolts
Qty: 5
M6 x 12 mm
Screws
Qty: 4
M6 x 30 mm
Screws
Qty: 2
M6 x 50 mm
Button Head
Screws
Qty: 3
M6 x 50 mm
Screws
Qty: 2
Wrench
Qty: 1
Hex Key
Qty: 1
Mounting
Brackets
Qty: 2
User Manual
Qty: 1
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
Type of Measurement Measurement
Weight Capacity Up to 22 lb. (10 kg) per
platform
Tilt Range
+12° ~ -12°
Requirements
For the latest requirements, please visit
www.startech.com/ADJPROJCART
• Laptop x 1
• Projector x 1
• Phillips Head Screwdriver x 1
6
Installation
Attach the Base
1. Flip the Base Cross Member and both Base Feet upside
down and place onto a clean and at surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Place one of the Base Feet into one of the grooves in the
Base Cross Member. Align the holes in the sides of the Base
Foot with the holes in the sides of the Base Cross Member.
Note: The holes in the Base Foot should be facing upwards.
3. Insert one M6 x 65mm Bolt through the Base Cross
Member, the Base Foot, and out the other end of the Base
Cross Member.
4. Slide one Type One Washer onto the end of the M6 x
65mm Bolt.
5. Thread one Nut onto the end of the M6 x 65mm Bolt and
tighten, using the Wrench.
6. Repeat steps 2-5 for the second M6 x 65mm Bolt.
7. Repeat steps 2-6 for the second Base Foot.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 1
Base Foot
Base Cross
Member
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Casters
1. Thread the two Casters with Brakes into the holes, located
in the bottom of the Base Feet and tighten, using the
Wrench. (Figure 2)
2. Insert the two Casters without Brakes into the holes on the
other side of the Base Feet and tighten, using the Wrench.
3. Flip the Base upright so that the Casters are making contact
with the surface.
Note: For uneven surfaces, adjust the position of the Nut on
each Caster.
Figure 2
Wrench Caster
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Support Pole
1. Slide the connecting end of the Support Pole over the
center of the Base Cross Member. Align the holes in the
Support Pole with the holes in the Base Cross Member.
(Figure 3)
2. Insert the four M6 x 12 mm Screws through the four holes
in the top of the connecting end of the Support Pole and
into the Base Cross Member.
3. Tighten all four M6 x 12 mm Screws, using the Hex Key.
8
Figure 3
Figure 4
M6 x 12
mm Screws
Support Pole
Wrench
M6 x 65
mm Bolt
Type One
Washer
Nut
Hex Key
9
4. Slide one M6 x 65mm Bolt through the square shaped holes
located in the sides of the connecting end of the Support
Pole. (Figure 4)
5. Slide one Type One Washer onto the M6 x 65mm Bolt.
6. Thread one Nut onto the M6 x 65mm Bolt and tighten,
using Wrench.
Attach the Laptop Platform
1. Place the Laptop Platform onto the ledge located on the
side of the Support Pole. Align the holes in the top of the
Laptop Platform and the Support Pole. (Figure 5)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
Laptop Platform
Phillips Head
Screwdriver
Support Pole
M6 x 30 mm
Screw
Wrench
Type One Washer
Nut
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 6
2. Insert one M6 x 30 mm Screw through the hole in the top
of the Laptop Platform and into the ledge portion of the
Support Pole.
3. Slide one Type One Washer onto the M6 x 30 mm Screw.
4. Thread one Nut onto the M6 x 30 mm Screw and tighten
by holding the Nut with the Wrench and by fastening the
M6 x 30 mm Screw, using an appropriate size Phillips Head
Screwdriver.
Note: Two people may be required to complete the step
5. Repeat steps 2-4 for the second M6 x 30 mm Screw.
Attach the Knobs
Knobs M6 x 50 mm Button
Head Screws
Inner Portion
of Support Pole
11
1. Determine the desired height setting for the Projector
Platform. The Projector Platform can be adjusted from
37.4” (950 mm) to 57” (1450 mm) in pre-set increments.
2. Extend the inner portion of the Support Pole to the desired
height setting.
3. Insert two M6 x 50 mm Button Head Screws through the
two holes located in the outer portion of the Support Pole.
(Figure 6)
4. Thread one Knob onto each one of the M6 x 50 mm Button
Head Screws and hand tighten.
Note: Do not overtighten the Knobs.
Attach the Mounting Brackets
Figure 7
Mounting
Bracket
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Align the holes in the Mounting Brackets with the holes
in the Support Pole and hold in place until the Screws are
installed in the following steps.
Attach the Projector Platform
1. Slide the Projector Platform over the Mounting Brackets.
Align the holes in the in the Projector Platform with the
holes in the Mounting Brackets. (Figure 8)
2. Slide one Type One Washer over one M6 x 50 mm Screw.
3. Insert the M6 x 50 mm Screw through the top hole in the
Projector Platform.
4. Slide one Type One Washer over the M6 x 50 mm Screw.
5. Thread one Nut onto the M6 x 50 mm Screw and tighten by
holding the Nut with the Wrench and by tightening the M6
x 50 mm Screw, using the Hex Key.
Figure 8
M6 x 50
mm Screw
M6 x 50 mm Button
Head Screw
Knob
Wrench
Type
One
Washers
Hex Key
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Slide one Type Two Washer over one M6 x 50 mm Button
Head Screw.
7. Insert the M6 x 50 mm Button Head Screw through the
lower hole in the Projector Platform.
8. Thread one Knob onto the M6 x 50 mm Button Head
Screw and hand tighten.
Operation
Move the Mobile Projector Cart
1. (Optional) Disconnect and remove any Cables connecting
the Mobile Projector Cart to the wall.
2. Secure the Projector and Laptop to the Mobile Projector
Cart.
3. Disengage the Brakes on the Casters with Brakes.
4. Grip the Support Pole and Laptop Stand and slowly move
the Mobile Projector Cart. Exercise caution around corners
or when navigating over bumps and/or uneven ground.
5. Lock the Brakes on the Casters with Brakes.
Adjust the Height of the Projector Platform
1. Disconnect and remove the Projector from the Mobile
Projector Cart.
2. Determine the desired height setting for the Projector
Platform. The Projector Platform can be adjusted from
37.4” (950 mm) to 57” (1450 mm) in pre-set increments.
14
3. Loosen and remove the Knob on each one of the M6 x 50
mm Button Head Screws.
4. Remove the two M6 x 50 mm Button Head Screws from the
two holes located in the outer portion of the Support Pole.
5. Adjust the inner portion of the Support Pole to the desired
height setting.
6. Insert two M6 x 50 mm Button Head Screws through the
two holes located in the outer portion of the Support Pole.
7. Thread one Knob onto each one of the M6 x 50 mm Button
Head Screws and hand tighten.
Note: Do not overtighten the Knobs.
Tilt the Projector Platform
1. Loosen the Knob under the Projector Platform while
supporting the weight of the Projector and the Projector
Platform.
2. Tilt to the desired viewing angle.
3. Hand tighten the Knob under the Projector Platform and
slowly release the Projector Platform.
Note: Ensure the Projector Platform is stable before
releasing.
Cable Management
1. Route the Cables from the Projector and Laptop down
through either of the two openings in the Projector
Platform and along the Support Pole.
2. Clip the open end of the Cable Clip over the Cables and
onto the Support Pole.
3. Repeat step 2 for the second Cable Clip.
15
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that bridge
the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd.,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support