StarTech.com ARMBARTRIO User Manual
Displayed below is the user manual for ARMBARTRIO by StarTech.com which is a product in the Monitor Mounts & Stands category. This manual has pages.
Related Manuals
Manual Revision: 12/09/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/ARMBARTRIO.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
ARMBARTRIO
Triple-Monitor Stand
*actual product may vary from photos
Instruction manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other
countries.
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction manual
i
Warning statements
Make sure to assemble this product according to the instructions. Failure to do so might result in
personal injury or property damage.
Make sure that the weight of the monitor doesn’t exceed the weight capacity of this product. If you
exceed the weight capacity, you might experience personal injury or damage to the equipment. This
product can support the following weight: 17.6 lb. (8 kg) per monitor mount.
Never operate this product if parts are missing or damaged.
Allowing any part of your component cables to get caught between moveable parts might result in
personal injury or damage to your equipment.
Varningsmeddelanden
Se till att du monterar produkten i enlighet med instruktionerna. Om du inte gör det kan skada på
person eller egendom uppstå.
Se till att skärmens vikt inte överstiger produktens viktkapacitet. Om viktkapaciteten överstigs kan
skada på person eller utrustning uppstå. Denna produkt har stöd för följande vikter: 8 kg per skårm.
Använd aldrig produkten om delar saknas eller är skadade.
Om någon del av dina komponentkablar fastnar mellan rörliga delar kan skada på person eller
utrustning uppstå.
Avertissements
Assemblez ce produit conformément aux instructions. Si vous ne respectez pas ces instructions, vous
risquez de vous blesser ou d’endommager l’équipement.
Vériez que le poids du moniteur ne dépasse pas la capacité pondérale du produit. Si vous dépassez
la capacité pondérale, vous risquez des blessures corporelles ou des dommages matériels. Ce produit
peut supporter 8 kg par ’ecran.
N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
Si les câbles des composants se coincent entre des parties mobiles, vous risquez des blessures
corporelles ou des dommages matériels.
Warnhinweise
Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann dies zu Verletzungen von
Personen oder Schäden an Eigentum führen.
Das Gewicht des Monitors darf die zulässige Traglast des Produkts nicht übersteigen. Wenn die Traglast
überschritten wird, kann dies zu Verletzungen von Personen oder Schäden an Geräten führen. Dieses
Produkt ist für folgendes Gewicht geeignet: 8 kg per monitor.
Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt sind.
Wenn sich Komponentenkabel in beweglichen Teilen verfangen, kann dies zu Verletzungen von
Personen oder Schäden an Geräten führen.
Dichiarazioni di avvertenza
Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle istruzioni potrebbe causare
danni a persone o proprietà.
Vericare che il peso del monitor non superi la capacità di supporto del prodotto. In caso di
superamento della capacità di supporto potrebbero vericarsi danni a persone o apparecchiature. Il
prodotto è in grado di supportare i seguenti pesi: 8 kg per monitor.
Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
L’eventuale intrappolamento dei cavi del componente fra elementi in movimento potrebbe causare
danni a persone o apparecchiature.
Mensagens de aviso
Certique-se de que monta este produto de acordo com as instruções. O incumprimento pode resultar
em ferimentos pessoais ou danos de propriedade.
Certique-se de que o peso do monitor não excede a capacidade de peso deste produto. Se exceder
a capacidade de peso, pode sofrer ferimentos pessoais ou danos no equipamento. Este produto pode
suportar o seguinte peso: 8 kg por monitor.
Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
Ao permitir que qualquer parte dos cabos do seu componente que preso entre partes móveis, pode
resultar em ferimentos pessoais ou danos no seu equipamento.
Advertencias de uso
Asegúrese de ensamblar este producto según las instrucciones. De lo contrario, pueden producirse
lesiones personales o daños de propiedad.
Asegúrese de que el peso del monitor no exceda la capacidad de carga de este producto. Si se excede
dicha capacidad se podrían producirse lesiones personales o daños al equipo. Este producto tiene
capicidad para el siguiente peso: 8 kg por monitor.
Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay daños en las mismas.
En caso de que los cables de su componente queden atascados en piezas en movimiento se pueden
producir lesiones personales o daños en el equipo.
Waarschuwingen
Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit niet goed gebeurt kan
lichamelijk letsel of materiële schade ontstaan.
Zorg dat het gewicht van het scherm de maximale capaciteit van dit product niet overschrijdt. Als u de
gewichtscapaciteit overschrijdt, kan persoonlijk letsel of schade aan de apparatuur ontstaan. Dit product
ondersteunt het volgende gewicht: 8 kg per monitor.
Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
Als uw componentkabels tussen bewegende delen vast komen te zitten, kan dit lichamelijk letsel of
schade aan de apparatuur veroorzaken.
注意
必ず取扱説明書に従って本製品の組み立てを行って下さい。取り扱いを誤った場合に、傷害を負う恐れ
や物的損害が発生する恐れがあります。
取り付けるモニターの重量が、本製品で定められた最大積載重量を超えないようにして下さい。最大積
載重量をオーバーした場合、傷害を負う恐れやモニターや本製品に損害が発生する恐れがあります。
本製品は、モニター1台あたり8kgまで支持できます。
本製品で使用している部品の一部が紛失していたり損傷している状態で使用するのは絶対に止
めて下さい。
ケーブルの一部が本製品の可動部に引っ掛かってしまった場合、傷害を負う恐れやモニターや本製品
に損害が発生する恐れがあります。
Instruction manual
ii
Table of Contents
Warnings ......................................................................................................................................................i
Introduction ............................................................................................ 1
Product diagram ........................................................................................................................................1
Product dimensions ................................................................................................................................. 1
Technical specications .......................................................................................................................... 2
Package contents ...................................................................................................................................... 3
Requirements ............................................................................................................................................. 5
Assembly .................................................................................................6
Assemble the lower pole ........................................................................................................................6
Attach the crossbar and VESA monitor mount...............................................................................7
Attach the cable-management clips .................................................................................................. 8
Attach monitors to the VESA monitor mounts ...............................................................................9
Adjust the tilt angle of your monitor .................................................................................................12
Tipping hazard warning..........................................................................................................................14
Adjust the vertical position of the monitors ................................................................................... 14
Technical support ...................................................................................15
Warranty information ............................................................................ 15
Instruction manual
1
Introduction
Product diagram
Pole
Crossbar
Cable-management collar
Cable-management clip
Baseplate
VESA monitor mount
Product dimensions
1330 mm
215 mm
215 mm 200 mm
48 mm
35 mm
35 mm
113 mm
100 mm
75 mm
75 mm
100 mm
116 mm
316 mm
434 mm
466 mm
±45°
±45° 360°
340° 340°
180°
Instruction manual
2
Technical specications
Type of measurement Measurement
VESA mounting hole pattern
75x75
100x100
Weight capacity
Up to 8 kg (17.6 lb.)
per monitor mount
Tilt
+45 to -45
Screen size
Between 330 mm and 686 mm
(13 in. and 27 in.)
Rotate
360
Swivel
+45 to -45
kg
Instruction manual
3
Package contents
Baseplate
Qty: One
Crossbar
Qty: One
Pole
Qty: One
VESA monitor mount
Qty: One
Cable-management clips
Qty: Six
Cable-management collar
Qty: One
2
1
34
65
Instruction manual
4
Base collar
Qty: One
3 mm hex key
Qty: One
5 mm hex key
Qty: One
6 mm hex key
Qty: One
M4x12 mm screws
Qty: Twelve
M5x12 mm screws
Qty: Twelve
8
7
9 10
11 12
Instruction manual
5
Washers
Qty: Twelve
Instruction manual
Qty: One
13 14
Requirements
• Three monitors or displays that are compatible with one of the VESA mounting hole
patterns ARMBARTRIO supports
• A Phillips screwdriver
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/ARMBARTRIO.
Instruction manual
6
Assembly
Warning! Make sure that the weight of the monitors does not exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product.
This product can support the following weight: Up to 17.6 lb. (8 kg).
Assemble the lower pole
1. Thread the cable-management collar onto the pole.
2. Thread the base collar onto the pole.
3. Screw the pole into the baseplate. (gure 1)
4. Use the 3 mm hex key to tighten the screws and attach the pole to the baseplate.
5. Push the base collar down so that it sits ush against the baseplate and covers the
screws. (gure 2)
gure 1
Pole
Cable-management collar
Base collar
Baseplate
gure 2
Base collar
3 mm hex key
Baseplate
Cable-management collar
Instruction manual
7
Attach the crossbar and VESA monitor mount
1. Slide the crossbar down the pole to the desired height. (gure 3)
gure 3
Crossbar
Pole
2. Use the 5 mm hex key to tighten the screw in the back of the crossbar. (gure 4)
gure 4 5 mm hex key
Crossbar
Instruction manual
8
3. Slide the VESA monitor mount down the pole.
Caution! Leave approximately 23 mm of space between the top of the crossbar and
the bottom of the VESA monitor mount.
4. Use the 5 mm hex key to tighten the screw in the side of the VESA monitor mount.
(gure 5)
gure 5
5 mm hex key
Crossbar
Attach the cable-management clips
1. Snap a cable-management clip onto each of the six segments of the crossbar.
(gure 6)
gure 6
23mm
VESA monitor mount
23 mm
Crossbar
Cable-management clip
Instruction manual
9
Attach monitors to the VESA monitor mounts
Warning! Attaching the monitors is a two-person job. Do not attempt to complete this
task by yourself.
Tipping hazard! The ARMBARTRIO is free-standing and when you attach monitors to it,
you increase the tipping hazard. A second person is required to keep the ARMBARTRIO
upright as you attach the monitors.
ARMBARTRIO is designed to be used with monitors that are the same size and weight.
If you attach monitors that are dierent sizes and weights to the ARMBARTRIO, you do
so at your own risk.
Use the 100x100 VESA mounting hole pattern to attach monitors
To accommodate dierent monitor sizes, the ARMBARTRIO comes with two sets of
screws that are dierent lengths and diameters.
To select the appropriate screws for the type of monitor that you’re using, complete
the following:
• Determine the depth of the mounting holes on the monitor.
• Determine the diameter of the mounting holes on the monitor.
1. Place two of the washers over the top two mounting holes on the back of the
monitor.
2. Insert two of the M4x12 mm screws or M5x12 mm screws through the washers
and into the back of the monitor. (gure 7)
Caution! At this point in the assembly, do not tighten the screws so that they are ush
against the monitor. To attach the monitor to the VESA monitor mounts, you need to
leave a small gap between the screws and the monitor.
Monitor
M4x12 mm screw
or
M5x12 mm screw
Washer
gure 7
Instruction manual
10
3. Carefully hook the screws into the top two slots on the VESA monitor mount at the
centre of the crossbar. (gure 8)
gure 8
VESA monitor
mount
4. Use a Phillips screwdriver to tighten the screws. (gure 9)
Caution! If the crossbar or the VESA monitor mount start to slip down the pole when
you add the weight of the monitor, remove the monitor and use the 5 mm hex key to
tighten the screw in the back of the crossbar. When the screw is tightened, repeat step
3 to reattach the monitor.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
gure 9
Instruction manual
11
5. Place two washers over the lower mounting holes in the VESA monitor mount.
6. Insert two M4x12 mm screws or M5x12 mm screws through the washers, the
mounting holes in the VESA monitor mount, and into the back of the monitor.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
7. Repeat steps 1 to 6 to attach the other two monitors to the VESA monitor mounts
on the crossbar.
Use the 75x75 VESA mounting hole pattern to attach a monitor
To accommodate dierent monitor sizes, the ARMBARTRIO comes with two sets of
screws that are dierent lengths and diameters.
To select the appropriate screws for the type of monitor that you’re using, complete
the following:
• Determine the depth of the mounting holes on the monitor.
• Determine the diameter of the mounting holes on the monitor.
1. Line up the mounting holes on the back of the monitor with the 75x75 mounting
holes on the VESA monitor mount at the centre of the crossbar.
2. While someone holds the monitor in place, insert the M4x12 mm screws or M5x12
mm screws through the washers, the mounting holes in the VESA monitor mount,
and into the back of the monitor. (gure 10)
3. Use a Phillips screwdriver to tighten the screws.
Caution! If the crossbar or the VESA monitor mount start to slip down the pole when
you add the weight of the monitor, remove the monitor and use the 5 mm hex key to
tighten the screw in the back of the crossbar. When the screw is tightened, repeat step
2 to reattach the monitor.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
4. Repeat steps 1 to 3 to attach the other two monitors to the VESA monitor mounts
on the crossbar.
Instruction manual
12
gure 10
Washer
VESA monitor mount
Crossbar
M4x12 mm screw
or
M5x12 mm screw
Adjust the tilt angle of your monitor
1. To change the angle that the monitor is tilted at, use the 6 mm hex key to turn the
screw in the side of the VESA monitor mount counterclockwise.
2. When the screw is loose, position the monitor at the angle that works best for you.
3. Use the 6 mm hex key to turn the screw clockwise to tighten it. (gure 11)
4. When you’re done adjusting the tilt angle, you can store the 5 mm hex key and
6 mm hex key in the hex key holder in the cable-management clip. (gure 12)
Instruction manual
13
gure 11
+45°
-45°
6 mm hex key
gure 12
Cable-management clip
Instruction manual
14
Tipping hazard warning
Warning! The most stable conguration of the ARMBARTRIO is in the “at” position,
with all three monitors positioned in a straight line. ARMBARTRIO can become
unstable depending upon the forward and rear positioning of the monitors. If you
adjust the position of the monitors, you do so at your own risk and you should exercise
caution and test the stability of the ARMBARTRIO before you use it in the adjusted
conguration. (gure 13)
gure 13
Adjust the vertical position of the monitors
• To make micro adjustments to the vertical height of the monitors, use the 5 mm
hex key to turn the screw in the top of the VESA monitor mounts clockwise and
counterclockwise. (gure 14)
gure 14
360° 360°
360°
5 mm hex key
Instruction manual
15
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.