StarTech.com ARMSTSCORNR User Manual
Displayed below is the user manual for ARMSTSCORNR by StarTech.com which is a product in the Desktop Sit-Stand Workplaces category. This manual has pages.
Related Manuals
Manual Revision: 04/29/2021
For the latest information, technical specications, and support for this product, please visit
www.StarTech.com/ARMSTSLG or www.StarTech.com/ARMSTSCORNR
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
ARMSTSLG
ARMSTSCORNR
Sit-Stand Desktop Workstation
*actual product may vary from photos
ARMSTSLG
Instruction manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other
countries.
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained
in this manual and related documents are the property of their respective holders.
Instruction manual i
Warning Statements
• Assemble this product according to the instructions.
• Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage.
• Weight capacity of the workstation: 12.7 kg (28 lb.)
• Weight capacity of the keyboard tray: 2.3 kg (5 lb.)
• Do not allow children to climb on this product, or use this product without
proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Never operate this product if parts are missing or damaged.
• Ensure the desk or mounting surface for this product can support the
combined weight of the workstation and the mounted equipment. Failure to
do so may result in property damage and/or personal injury.
• When lowering or raising the workstation, ensure the mounted equipment is
properly secured or supported and the speed is slow enough to prevent any
equipment instability. Failure to do so may result in property damage and/or
personal injury.
• Ensure all equipment cables are of adequate length for the highest
workstation position. Failure to do so may result in property damage and/or
personal injury.
• Tipping Hazard! This product is freestanding and therefore prone to tipping
if mishandled or overloaded. Exercise caution when moving, loading,
unloading and adjusting the product. Failure to do so could result in
equipment damage and/or personal injury.
• Stored Energy Hazard! This product contains a spring mechanism which
can cause the assembly and/or mounted equipment to move forcibly, and
quickly, when released via the actuating lever or handle. Read and follow the
operating instructions and heed any precautions provided. Before operating
the lever or handle, understand the motion created by the spring mechanism
and always exercise caution. Failure to do so may result in property damage
and/or serious personal injury.
• Pinch hazard! Keep your ngers clear from moving components when you
move the workstation up or down
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
Instruction Manual ii
• Arbetsstationens viktkapacitet: 12,7 kg (28 lb.)
• Tangentbordslådans viktkapacitet: 2,3 kg (5 lb.)
• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt.
• Använd aldrig produkten om delar saknas eller är skadade.
• Se till att skrivbordet eller monteringsytan kan bära den kombinerade vikten
av den här produkten och den monterade utrustningen. Om du inte gör det
kan det leda till egendomsskador och/eller personskador.
• När du sänker eller höjer arbetsstationen ska du se till att den monterade
utrustningen är ordentligt säkrad eller stöds och att hastigheten är tillräckligt
långsam för att förhindra att utrustningen blir instabil. Underlåtenhet att
göra detta kan leda till egendomsskador och/eller personskador.
• Se till att alla utrustningskablar har tillräcklig längd för den högsta
arbetsstationens/displayens läge. Om detta inte görs kan det leda till
egendomsskador och/eller personskador.
• Tippningsrisk! Denna produkt är fristående och kan därför tippas om den
hanteras felaktigt eller överbelastas. Var försiktig när du yttar, lastar, lossar
och justerar produkten. Underlåtenhet att göra det kan leda till skador på
utrustningen och / eller personskada.
• Risk för lagrad energi! Denna produkt innehåller en ädermekanism som kan
leda till att monteringskomponenterna och/eller displayen rör sig kraftigt
och snabbt uppåt när den aktiveras. Följ de medföljande instruktionerna
och var alltid försiktig när du aktiverar handtaget. Använd inte handtaget
före steg 4 i installationsförfarandet. När du justerar displayens höjd ska du
alltid stödja eller hantera displayen med båda händerna (som på bilden) för
att på ett säkert sätt kontrollera höjningen eller sänkningen av displayen.
Underlåtenhet att göra detta kan leda till egendomsskador och/eller
allvarliga personskador.
• Klämrisk! Håll ngrarna borta från rörliga komponenter när du yttar
arbetsstationen upp eller ner.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken.
• Draagvermogen werkstation: 12,7 kg (28 lbs.)
• Gewichtscapaciteit van de toetsenbordhouder: 2,3 kg (5 lb.)
• Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten
Instruction Manual iii
worden gebruikt.
• Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als
u weerstand voelt tijdens het vastdraaien van de schroeven, stop dan.
• Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
• Zorg ervoor dat het bureau of het montageoppervlak het gecombineerde
gewicht van dit product en de gemonteerde apparatuur kan dragen. Doet u
dit niet, dan kan dit leiden tot materiële schade en/of persoonlijk letsel.
• Wanneer u het werkstation laat zakken of optilt, moet u ervoor zorgen dat
de gemonteerde apparatuur goed vastzit of ondersteund wordt en dat de
snelheid laag genoeg is om te voorkomen dat de apparatuur instabiel wordt.
Doet u dit niet, dan kan dit leiden tot materiële schade en/of persoonlijk
letsel.
• Zorg ervoor dat alle kabels van de apparatuur voldoende lang zijn voor de
hoogste positie van het werkstation/beeldscherm. Doet u dit niet, dan kan
dit leiden tot materiële schade en/of persoonlijk letsel.
• Kantelgevaar! Dit product is vrijstaand en kan daarom kantelen bij verkeerde
behandeling of overbelasting. Wees voorzichtig bij het verplaatsen, laden,
lossen en aanpassen van het product. Als u dit niet doet, kan dit leiden tot
schade aan de apparatuur en / of persoonlijk letsel.
• Gevaar door opgeslagen energie! Dit product bevat een veermechanisme
dat ertoe kan leiden dat de montageonderdelen en/of het display bij
bediening met kracht en snel omhoog bewegen. Volg de bijgeleverde
instructies en wees altijd voorzichtig bij het bedienen van de hendel.
Bedien de hendel niet vóór stap 4 van de installatieprocedure. Wanneer u
het scherm in hoogte verstelt, moet u het scherm altijd met beide handen
ondersteunen of vastpakken (zoals afgebeeld) om het scherm veilig omhoog
of omlaag te kunnen bewegen. Doet u dit niet, dan kan dit leiden tot
materiële schade en/of ernstig persoonlijk letsel.
• Gevaar voor beknelling! Houd uw vingers weg van de bewegende
onderdelen als u uw werkstation naar boven of beneden beweegt.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解して
から組み立て作業を始めて下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載
重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
• ワークステーションの耐荷重：12.7kg（28ポンド）
• キーボードトレイの耐荷重：2.3kg（5ポンド）
• 本製品に小さなお子様が乗って遊ばないようにして下さい。お子様が使用
する際には、適切な監視を怠らないようにして下さい。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
• 本製品を組み立てる際、ネジを締めすぎないようにして下さい。ネジを締め
ているうちに手応えを感じたら、締めるのを止めてください。
• 本製品で使用している部品の一部が紛失していたり損傷している状態で使
用するのは絶対に止めて下さい。
Instruction Manual iv
• 机や設置面が、本製品と積載する機器の合計重量に耐えられるか確認して
ください。確認を怠ると、破損や怪我につながる可能性があります。
• 本製品を降ろしたり上げたりするときは、搭載機器が適切に固定または保
持されていることを確認し、機器が不安定にならないように十分な速度で
行ってください。誤った操作をすると、破損や怪我につながる可能性があり
ます。
• すべての機器のケーブルが、本製品／ディスプレイを最も高い位置に設定
した場合に適切な長さになっているか確認してください。確認を怠ると、破
損や怪我につながる可能性があります。
• チップの危険。この製品は自立型であるため、取り扱いを誤ったり、過負荷
になったりすると転倒しやすくなります。製品を移動、ロード、アンロード、お
よび調整するときは注意してください。そうしないと、機器の損傷や人身事
故につながる可能性があります。
• 反動注意!本製品にはスプリング機構が搭載されており、作動させるとアセ
ンブリ部品やディスプレイが反動で上方向に大きく動く場合があります。付
属の説明書に従い、ハンドルを操作する際には常に注意を払ってください。
設置手順のステップ4より前にハンドルを操作しないでください。ディスプ
レイの高さを調整するときは、必ず両手でディスプレイを支え、ハンドルを
握って安全にディスプレイの昇降をコントロールしてください（図参照）。誤
った操作をすると、破損や怪我につながる可能性があります。
• 危険!ワークステーションを上下に動かす際は、指を可動部に近づけないよ
うにして下さい。
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni.
• Capacità di peso della workstation: 12,7 kg (28 lb.)
• Capacità di peso del vassoio della tastiera: 2,3 kg (5 lb.)
• Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un’adeguata supervisione.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• Durante l’assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l’operazione.
• Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
• Assicurarsi che la scrivania o la supercie di montaggio possano sostenere
il peso combinato di questo prodotto e dell’attrezzatura montata su di esso.
In caso contrario si potrebbero vericare danni alla proprietà e/o lesioni
personali.
• Quando si abbassa o si solleva la postazione di lavoro, assicurarsi che
l’attrezzatura montata sia adeguatamente ssata o sostenuta e che la velocità
Instruction Manual v
sia sucientemente bassa da evitare qualsiasi instabilità dell’attrezzatura.
In caso contrario, potrebbero vericarsi danni alla proprietà e/o lesioni
personali.
• Assicurarsi che tutti i cavi dell’attrezzatura siano di lunghezza adeguata per
la posizione più alta della stazione di lavoro/display. In caso contrario, si
potrebbero vericare danni alla proprietà e/o lesioni personali.
• Rischio di ribaltamento! Questo prodotto è indipendente e quindi incline
a ribaltarsi se maneggiato in modo improprio o sovraccarico. Prestare
attenzione durante lo spostamento, il caricamento, lo scaricamento e la
regolazione del prodotto. In caso contrario, potrebbero vericarsi danni alle
apparecchiature e / o lesioni personali.
• Pericolo di energia immagazzinata! Questo prodotto contiene un
meccanismo a molla che può far sì che i componenti del dispositivo e/o
il display si muovano forzatamente e rapidamente verso l’alto quando
vengono azionati. Seguire le istruzioni fornite e prestare sempre attenzione
quando si aziona la maniglia. Non azionare la maniglia prima del passo
4 della procedura di installazione. Quando si regola l’altezza del display,
reggere o maneggiare sempre il display con entrambe le mani (come
mostrato) per controllare in sicurezza il sollevamento o l’abbassamento del
display. In caso contrario, si potrebbero vericare danni alla proprietà e/o
gravi lesioni personali.
• Pericolo di Schiacciamento! Tenere lontane le dita da parti in movimento
quando si è in fase di regolazione della stazione di lavoro.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels.
• Capacité de poids de la station de travail: 12.7 kg (28 lb)
• Capacité de poids du plateau de clavier: 2,3 kg (5 lb)
• N’autorisez pas les enfants à grimper sur ce produit ni à l’utiliser sans
surveillance.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Ne serrez pas trop les vis lors de l’assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer.
• N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
• Assurez-vous que le bureau ou la surface de montage peut supporter le
poids combiné de ce produit et de l’équipement monté. Le non-respect de
cette consigne peut entraîner des dommages matériels et/ou des blessures
corporelles.
• Lors de la descente ou de la montée du poste de travail, assurez-vous que
l’équipement monté est correctement xé ou soutenu et que la vitesse est
susamment lente pour éviter toute instabilité de l’équipement. Le non-
Instruction Manual vi
respect de cette consigne peut entraîner des dommages matériels et/ou
corporels.
• Assurez-vous que tous les câbles de l’équipement sont d’une longueur
adéquate pour la position la plus élevée du poste de travail/de l’écran. Le
non-respect de cette consigne peut entraîner des dommages matériels et/
ou corporels.
• Risque de basculement! Ce produit est autonome et donc enclin à basculer
s’il est mal manipulé ou surchargé. Faites preuve de prudence lors du
déplacement, du chargement, du déchargement et du réglage du produit. Le
non-respect de cette consigne peut entraîner des dommages matériels et /
ou des blessures corporelles.
• Danger lié à l’énergie stockée ! Ce produit contient un mécanisme à ressort
qui peut entraîner le déplacement forcé et rapide des composants de
l’assemblage et/ou de l’écran vers le haut lorsqu’il est actionné. Suivez les
instructions fournies et faites toujours preuve de prudence lorsque vous
actionnez la poignée. N’actionnez pas la poignée avant l’étape 4 de la
procédure d’installation. Lorsque vous réglez la hauteur de l’écran, soutenez
ou manipulez toujours l’écran avec les deux mains (comme indiqué) pour
contrôler en toute sécurité la montée ou la descente de l’écran. Le non-
respect de cette consigne peut entraîner des dommages matériels et/ou des
blessures corporelles graves.
• Risque de pincement ! Ne pas approcher les doigts des composants mobiles
quand vous levez ou abaissez le poste de travail.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Leia todo o manual e certique-se de que entende as instruções antes de
começar a montar e a utilizar este produto.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade.
• Capacidade de peso da estação de trabalho: 12.7 kg (28 lb.)
• Capacidade de peso da bandeja do teclado: 2,3 kg (5 lb.)
• Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar.
• Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
• Assegura que a mesa ou a superfície de montagem pode suportar o peso
combinado deste produto e do equipamento montado. Não o fazer pode
resultar em danos materiais e/ou ferimentos pessoais graves.
• Ao baixar ou subir o posto de trabalho, assegurar que o equipamento
montado está devidamente xado ou suportado e que a velocidade é
sucientemente lenta para evitar qualquer instabilidade do equipamento.
Não o fazer pode resultar em danos materiais e/ou ferimentos pessoais.
Instruction Manual vii
• Assegur que todos os cabos do equipamento têm o comprimento adequado
para a posição mais alta do posto de trabalho/posição do visor. Não o fazer
pode resultar em danos materiais e/ou ferimentos pessoais.
• Derrubando o perigo! Este produto é independente e, portanto, sujeito a
tombar se for manuseado incorretamente ou sobrecarregado. Tenha cuidado
ao mover, carregar, descarregar e ajustar o produto. Não fazer isso pode
resultar em danos ao equipamento e / ou ferimentos pessoais
• Perigo de Energia Armazenada! Este produto contém um mecanismo de
mola que pode resultar na movimentação forçada e rápida dos componentes
de montagem e/ou visor para cima quando accionado. Siga as instruções
fornecidas e tenha sempre cuidado ao accionar o manípulo. Não accionar
a pega antes do passo 4 do procedimento de instalação. Ao ajustar a altura
do visor, apoi sempre o visor com ambas as mãos (como illustrado) para
controlar com segurança a subida ou descida do visor. Não o fazer pode
resultar em danos materiais e/ou ferimentos pessoais graves.
• Risco de dedos trilhados! Mantenha os dedos afastados dos componentes
em movimento quando move a estação de trabalho para cima ou para baixo.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad.
• Capacidad de peso de la estación de trabajo: 12.7 kg (28 lb)
• Capacidad de peso de la bandeja del teclado: 2,3 kg (5 lb)
• No permita que los niños se suban a este producto o que lo utilicen sin la
debida supervisión de un adulto.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si
al apretar los tornillos siente resistencia, no los apriete más.
• Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
• Asegúrese de que el escritorio o la supercie de montaje pueda soportar
el peso combinado de este producto y del equipo montado. Si no lo hace,
puede provocar daños materiales y/o lesiones personales.
• Cuando baje o suba la estación de trabajo, asegúrese de que el equipo
montado esté bien asegurado o apoyado y que la velocidad sea lo
sucientemente lenta como para evitar que el equipo pueda caerse. Si no lo
hace, puede provocar daños materiales y/o personales.
• Asegúrese de que todos los cables de los equipos tengan la longitud
adecuada para la posición más alta de la estación de trabajo o pantalla. Si no
lo hace, puede provocar daños materiales y/o lesiones personales.
Instruction Manual viii
• ¡Peligro de vuelco! Este producto es independiente y, por lo tanto, propenso
a volcarse si se manipula incorrectamente o se sobrecarga. Tenga cuidado al
mover, cargar, descargar y ajustar el producto. El no hacerlo podría resultar
en daños al equipo y / o lesiones personales.
• ¡Peligro de Energía Almacenada! Este producto contiene un mecanismo de
resorte que puede hacer que los componentes del conjunto y/o la pantalla
se muevan rápidamente con fuerza hacia arriba al ser accionados. Siga las
instrucciones proporcionadas y tenga siempre precaución al accionar la
manija. No la accione antes del paso 4 del procedimiento de instalación.
Cuando ajuste la altura de la pantalla, sujete o sosténgala siempre con ambas
manos (como se muestra) para controlar con seguridad la subida o bajada
de la misma. Si no lo hace, puede provocar daños materiales y/o lesiones
personales graves.
• ¡Peligro de Aplastamiento! Mantenga sus dedos alejados de las partes
móviles al desplazar la estación de trabajo hacia arriba o hacia abajo.
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden
haben.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
• Gewichtskapazität der Workstation: 12,7 kg (28 lb.)
• Gewichtskapazität der Tastaturablage: 2,3 kg (5 lb.)
• Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt
ohne Aufsicht zu benutzen.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu
fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand
stoßen, stellen Sie das Anziehen ein.
• Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt
sind.
• Stellen Sie sicher, dass der Tisch oder die Montageäche das kombinierte
Gewicht dieses Produkts und der montierten Geräte tragen kann. Andernfalls
kann es zu Sach- und/oder Personenschäden kommen.
• Stellen Sie beim Absenken oder Anheben der Workstation sicher, dass
die montierte Ausrüstung ordnungsgemäß gesichert oder abgestützt
ist und die Geschwindigkeit langsam genug ist, um eine Instabilität der
Ausrüstung zu verhindern. Bei Nichtbeachtung kann es zu Sach- und/oder
Personenschäden kommen.
• Vergewissern Sie sich, dass alle Gerätekabel eine ausreichende Länge für die
höchste Position der Workstation/des Displays haben. Andernfalls kann es zu
Sach- und/oder Personenschäden kommen.
Instruction Manual ix
• Kippgefahr! Dieses Produkt ist freistehend und neigt daher bei falscher
Handhabung oder Überlastung zum Umkippen. Seien Sie vorsichtig, wenn
Sie das Produkt bewegen, laden, entladen und einstellen. Andernfalls kann
es zu Geräteschäden und / oder Verletzungen kommen.
• Gefahr durch gespeicherte Energie! Dieses Produkt enthält
einen Federmechanismus, der dazu führen kann, dass sich die
Montagekomponenten und/oder das Display bei Betätigung gewaltsam und
schnell nach oben bewegen. Befolgen Sie die mitgelieferten Anweisungen
und lassen Sie bei der Betätigung des Gris stets Vorsicht walten. Betätigen
Sie den Gri nicht vor Schritt 4 des Installationsvorgangs. Stützen oder fassen
Sie das Display beim Verstellen der Höhe immer mit beiden Händen an (wie
abgebildet), um das Anheben oder Absenken des Displays sicher zu steuern.
Andernfalls kann es zu Sachschäden und/oder schweren Personenschäden
kommen.
• Einklemmgefahr! Halten Sie Ihre Finger fern von beweglichen Teilen wenn
Sie die Arbeitsstation hoch und runter Bewegen.
Instruction manual
Table of Contents
Warning Statements ..............................................................................i
Product dimensions ............................................................................... 1
ARMSTSLG.................................................................................................................................................... 1
Weight capacity ......................................................................................................................................... 2
ARMSTSCORNR ..........................................................................................................................................3
Weight capacity ......................................................................................................................................... 4
Package contents ...................................................................................5
Requirements .........................................................................................5
Raise or lower the Workstation ............................................................6
Adding equipment to the Workstation...............................................7
Place free-standing equipment onto the Workstation ................................................................7
Clamp equipment to the grommet hole .......................................................................................... 9
Adjust the tension of the Workstation ................................................ 10
Reposition the keyboard tray ...............................................................11
Warranty Information .............................................................................................................................. 13
Limitation of Liability ............................................................................................................................... 13
Instruction manual 1
Product dimensions
ARMSTSLG
160 mm
(6.3”)
22 mm
(0.9”)
15 mm
(0.6”)
15 mm
(0.6”)
422 mm
(16.6”)
560 mm
(22.0”)
130 mm
(5.1”)
Instruction manual 2
Weight capacity
0 to 12.7 kg
(0 to 28 lb.)
0 to 2.3 kg
(0 to 5 lb.)
173 mm
(6.8”)
Diameter 60 mm
(2.4”)
703 mm
(27.6”)
530 mm
(20.9”)
265 mm
(10.4”)
666 mm
(26.2”)
900 mm
(35.4”)
50 mm
(1.9”)
680 mm
(26.8”)
Instruction Manual 3
ARMSTSCORNR
113 mm
(4.4”) 155 mm
(6.1”)
585 mm
(23”)
452 mm
(17.8”)
Instruction Manual 4
Weight capacity
0 to 12.7 kg
(0 to 28 lb.)
0 to 2.3 kg
(0 to 5 lb.)
128 mm
(5”)
1135 mm
(44.7”)
640 mm
(25.2”)
530 mm
(20.9”)
667 mm
(26.3”)
680 mm
(26.8”)
60 mm
(2.4”)
449.66 mm
(17.7”)
50 mm
(1.97”)
Instruction manual 5
Package contents
• 1 x sit-to-stand workstation
• 1 x small hex key
• 1 x large hex key
• 1 x clamp plate
• 1 x M10 x 50 mm bolt
• 1 x ³/₈ - 16 x 50 mm bolt
• 1 x instruction manual
Requirements
• 1 x wrench (if you use the grommet hole to mount your equipment)
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/ARMSTSLG
-- or --
www.StarTech.com/ARMSTSCORNR.
Instruction manual 6
Raise or lower the Workstation
Stored Energy Hazard! This product contains a spring mechanism which can cause
the assembly and/or mounted equipment to move forcibly, and quickly, when released
via the actuating lever or handle. Read and follow the operating instructions and
heed any precautions provided. Before operating the lever or handle, understand the
motion created by the spring mechanism and always exercise caution. Failure to do so
may result in property damage and/or serious personal injury.
Tipping Hazard! This product is freestanding and therefore prone to tipping if
mishandled or overloaded. Exercise caution when moving, loading, unloading and
adjusting the workstation. Failure to do so could result in equipment damage and/or
personal injury.
Pinch hazard! During the upward or downward movement of the workstation,
pinch points can be created by the sliding and rotating components. To avoid injury
or property damage, keep your hands, arms and property away from these moving
components and pinch points. Failure to follow this instruction may result in property
damage and/or serious injury.
Caution! Ensure all equipment cables are of adequate length for the highest
workstation position. Failure to do so may result in property damage and/or personal
injury.
Warning! When lowering or raising the workstation, ensure the mounted equipment
is properly secured or supported and the speed is slow enough to prevent any
equipment instability. Failure to do so may result in property damage and/or personal
injury.
gure 1
Paddle
Instruction manual 7
1. To move the workstation up or down, squeeze the paddle located on the right side
of the Workstation. (gure 1)
2. When the workstation is at the desired height, release the paddle to lock the
Workstation into position.
Adding equipment to the Workstation
You can place equipment onto the Workstation or you can use the provided hardware
and grommet hole to mount your equipment to the Workstation.
Warning! If you attach a monitor arm to the Workstation, make sure that you don’t
position the monitors beyond the edge of the desk surface. If you extend the monitors
past the desk surface, you could create a tipping hazard. Make sure that you lower
the Workstation to its lowest position before you add equipment to it, distribute the
weight across the Workstation evenly, and don’t extend the monitors beyond the edge
of the adjustable desk surface.
Place free-standing equipment onto the Workstation
1. Move the Workstation to the lowest position.
2. Place your equipment (for example, monitors, keyboard, mouse, and so on) onto the
workstation. (gure 2)
Warning! Do not exceed the weight capacity of the Workstation.
gure 2
0 to 5 lb.
0 to 28 lb.
Instruction manual 8
3. Make sure that your equipment is stable on the workstation before you move the
Workstation.
4. Raise the Workstation a short distance. If you can’t easily move the Workstation
upwards or it begins to move downwards when you squeeze the paddle, you need
to adjust the tension. For more information about how to do this, see the “Adjust the
tension of the Workstation” section of the manual.
5. Position your equipment cables so that they run through the loops located at the
back of the Workstation. (gure 3)
6. If necessary, reposition the keyboard tray. For more information about how to do
this, see the “Reposition the keyboard tray” section of the manual.
gure 3
Loop
Cables
Instruction manual 9
Clamp equipment to the grommet hole
Warning! Do not exceed the weight capacity of the Workstation.
StarTech.com oers optional monitor mounting accessories that are compatible with
the Workstation. For example, the ARMDUAL, ARMSLIM, ARMPIVOT, and so on. To
attach a mounting accessory to the grommet hole on the Workstation, complete the
following steps.
Note: If the mounting accessory is congured for a desk mount, you need to
recongure it for a grommet hole mount. For more information about how to do this,
see the documentation that came with the mounting accessory.
1. Move the Workstation to the highest position.
2. Position the mounting accessory over the grommet hole on the Workstation.
3. Depending on the size of the threaded hole on the mounting accessory, thread
either the M10 x 50 mm bolt or the ³/₈ - 16 x 50 mm bolt through the clamp plate.
Note: If the threaded hole on the mounting accessory isn’t compatible with the bolts
provided with the Workstation, you may need to use the hardware that came with the
mounting accessory, if suitable.
4. Hold the mounting accessory upright, thread the bolt up through the grommet hole
and into the accessory, and use a wrench to tighten the bolt. (gure 4)
5. To mount additional equipment, move the Workstation to the lowest position and
add your equipment.
gure 4
Mounting accessory
Grommet hole
Clamp plate
M10 x 50 bolt or
³/₈ - 16 x 50 mm bolt
Instruction manual 10
6. Make sure that your equipment is stable on the workstation before you move the
Workstation.
7. Raise the Workstation a short distance. If you can’t easily move the Workstation
upwards or it begins to move downwards when you squeeze the paddle, you need
to adjust the tension. For more information about how to do this, see the “Adjust the
tension of the Workstation” section of the manual.
8. Position your equipment cables so that they run through the loops located at the
back of the Workstation. (gure 5)
9. If necessary, reposition the keyboard tray. For more information about how to do
this, see the “Reposition the keyboard tray” section of the manual.
Adjust the tension of the Workstation
Warning! Remove all equipment from the Workstation before you begin to adjust the
tension.
1. Carefully remove all of the equipment from the Workstation.
gure 5
Cables
Loop
Instruction manual 11
2. Raise the Workstation to the highest position.
3. To adjust the tension of the Workstation, use the large hex key to turn the
adjustment screw clockwise or counterclockwise. (gure 6)
4. To check to see if the tension requires further adjustment, move the Workstation to
the lowest position. Place the equipment back onto the Workstation and do one of
the following:
• If the tension is at the appropriate setting for the weight of the equipment,
move the Workstation to the desired height.
• If you need to adjust the tension further, complete steps 1 to 3 until the
tension is at the appropriate setting for the weight of the equipment.
Reposition the keyboard tray
1. Carefully remove all of the equipment from the Workstation.
2. Raise the Workstation to a position that enables you to access the underside of the
keyboard tray.
3. Use the small hex key to remove the two sets of six screws from the underside of the
keyboard tray. (gure 7)
4. Move the keyboard tray, line up the holes, and insert the two sets of six screws.
5. Use the small hex key to tighten the screws.
gure 6 Large hex key
Adjustment screw
Instruction manual 12
gure 7
Note: The Workstation is ipped over
in the rst drawing to illustrate where
the screws are located.
Small hex key
Instruction manual 13
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct or
indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,
loss of business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this
statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old
and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
StarTech.com Ltd.
45 Artisans
Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South
Hamilton Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT
Hoofddorp
The Netherlands