StarTech.com CMVER40UD User Manual
Displayed below is the user manual for CMVER40UD by StarTech.com which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Manual Revision: 05/25/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/CMVER40UD.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
CMVER40UD
Vertical Cable Organizer with D-Ring
Hooks - 40U
*actual product may vary from photos
Instruction manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks, and other
protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Instruction manual
i
Table of Contents
Introduction ............................................................................................ 1
Product diagram ........................................................................................................................................1
Package contents ...................................................................................................................................... 3
Installation requirements .......................................................................................................................3
Tool-less installation .............................................................................. 4
Relocate the mounting buttons ...........................................................4
Installation using tools ..........................................................................5
Remove the mounting buttons ........................................................................................................... 5
Remove D-ring hooks .............................................................................................................................. 5
Attach a cable organizer .........................................................................................................................6
Installation options ................................................................................7
Technical support ...................................................................................9
Warranty information ............................................................................ 9
Instruction manual
1
Introduction
The CMVER40UD is a tool-less vertical cable organizer that works with virtually any
two-post, four-post, or enclosed server rack or cabinet. The CMVER40UD provides an
ideal solution for organizing the cables in your server rack or cabinet, and you can
mount the cable organizer in dierent ways to suit your needs. The D-ring hooks are
large enough to accommodate multiple cables of varying sizes.
Product diagram
D-ring hook
Mounting hole
Mounting hole
Front
Instruction manual
2
Back
D-ring hook
Mounting hole
Mounting button
D-ring hook hardware
Instruction manual
3
Package contents
• 2 x vertical cable organizers
• 4 x M4 x 16 mm screws
• 8 x M4 nuts
• 8 x 12 mm washers
• 1 x instruction manual
Installation requirements
• If you relocate or remove the mounting buttons or D-ring hooks, a Phillips
screwdriver is required.
Installation requirements are subject to change. For the latest requirements, please
visit www.StarTech.com/CMVER40UD.
Instruction manual
4
Tool-less installation
If you don’t need to move the mounting buttons or D-ring hooks, you don’t require any
tools to attach the cable organizers to a server rack or cabinet.
Note: You can attach the cable organizers to the outside or the inside of the server rack
or cabinet.
• Attach the cable organizers to the server rack or cabinet so that the mounting
buttons t into the keyhole-shaped mounting holes on the server rack or cabinet.
Relocate the mounting buttons
The mounting buttons come preinstalled but you can move them to any of the holes
on the cable organizers.
1. Use a Phillips screwdriver to remove the screw from the mounting button.
2. Select a mounting hole on the back or sides of the cable organizers.
Note: You can also move any of the D-ring hooks and use those holes to attach the
mounting button. For more information, see the “Remove D-ring hooks” section.
3. Line up the mounting button with the hole and use a Phillips screwdriver to
insert the screw that you removed in step 1 into the mounting button and cable
organizer.
4. On the other side of the mounting button, attach one of the 12 mm washers and
one of the M4 nuts to the screw.
Instruction manual
5
Installation using tools
If your server rack doesn’t have keyhole-shaped mounting holes, you need to remove
the mounting buttons or two D-ring hooks, and use the included hardware to attach
the cable organizer to your server rack.
Screw
Mounting button
D-ring hook
hardware
D-ring hook
Mounting
hole
Remove the mounting buttons
If you want to use the holes that the mounting buttons are in to attach the cable
organizer to your server rack, you need to remove the mounting buttons.
• Use a Phillips screwdriver to remove the screws from the mounting buttons.
Note: Make sure that you store the mounting buttons and screws in a safe place so
that you can use them again.
Remove D-ring hooks
• On the back of the cable organizer, use a Phillips screwdriver to remove the D-ring
hook hardware.
Note: Make sure that you store the D-ring hooks and hardware in a safe place so that
you can use them again.
Instruction manual
6
D-ring hook hardware
D-ring hook
Mounting button
Attach a cable organizer
After you remove the mounting buttons or D-ring hooks, complete the following to
attach the cable organizer to your server rack:
1. Line up the mounting holes on the cable organizer with the mounting holes on any
of the following on your server rack:
• The vertical mounting plates.
• The horizontal mounting rails.
• The equipment-mounting holes.
Note: To view images of some of the dierent installation options mentioned above,
see the “Installation options” section.
2. Insert an M4 x 16 mm screw through the cable organizer and the server rack.
3. On the other side of the cable organizer and server rack, attach one of the 12 mm
washers and one of the M4 nuts to the screw.
4. Repeat steps 3 and 4 to attach a second screw.
Instruction manual
7
Installation options
The following images show some of the CMVER40UD installation options.
Note: Some images feature the CMVER20UD version.
Attached to a vertical mounting plate
Instruction manual
8
Attached to a horizontal mounting rail
Instruction manual
9
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.