StarTech.com CPUMNTUD User Manual
Displayed below is the user manual for CPUMNTUD by StarTech.com which is a product in the CPU Holders category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (CPUMNTUD)
Part Function
1Mounting Plate
• Allows for lateral adjustments.
• Mounts the CPU Holder into place.
Note: The CPU Holder needs a minimum table
thickness of .75” (19mm).
2Adjustment
buttons (2)
• Allows for height adjustments.
Note: The CPU Holder has a height range of minimum
14” (357mm) and maximum 21.9” (557mm).
3Adjustment
Knobs (2)
• Allows for width adjustments.
Note: The CPU Holder has a width range of minimum
4.84” (123mm) and maximum 9.96” (253mm).
4CPU Holder
• Mounts the CPU.
Note: The CPU Holder has a maximum weight
capacity of 66 lbs (30 kg).
Requirements
For the latest requirements, please visit www.startech.com/CPUMNTUD.
CPU Table Mount
Installation
Notes: StarTech.com is not responsible for any damages related to the installation of
this product.
The CPU Holder needs a minimum table thickness of .75” (19mm).
Please refer to the warning statements prior to installation.
Mounting Plate
1. Align the Mounting Plate into position on the mounting surface.
2. Insert the Mounting Screws (6) through the Mounting Holes (6) on the Mounting
Plate and into the mounting surface.
3. Using a Phillips Head Screwdriver, tighten the Mounting Screws (6). Be careful not
to over-tighten.
CPU Holder
• Align the Swivel on the bottom of the CPU Holder with the Rails on the Mounting
Plate. Make sure that the Rails on the Swivel are properly aligned with the Rails on
the Mounting Plate so that you can easily slide the CPU Holder across the Rails.
Stopper Installation
1. Align two of the Stoppers with the Stopper Holes (2), on one end of the Mounting
Plate. Insert the Stopper between the base of the Mounting Plate and the Rails on
the Mounting Plate.
2. Insert the Stopper Screw through the Mount Plate Rail and into the Stopper.
3. Using a Phillips Head Screwdriver, tighten the Stopper Screws (2). Be careful not
to over-tighten.
Adjusting the CPU Holder
Width
The CPU Holder has a width range of 4.84” (123mm) - 9.96” (253mm).
1. Loosen the two Adjustment Knobs located on either side of the CPU Holder.
2. Slide the Width Adjustment Bar away from the CPU Holder.
3. Once the Width Adjustment Bar is at the desired width, tighten the Adjustment
Knobs to lock the Width Adjustment Bar in place.
4
1
3
2
For the State of California
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a one-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni. Il prodotto è in grado di supportare i seguenti
pesi: 66 lbs (30 kg).
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade. Este produto pode
suportar o seguinte peso: 66 lbs (30 kg).
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Asegúrese de no exceder la capacidad de peso de este producto. La sobrecarga
de este producto puede causar lesiones personales o daños en la propiedad. Este
producto tiene capicidad para el siguiente peso: 66 lbs (30 kg).
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van dit
product kan letsel of materiële schade veroorzaken. Dit product ondersteunt het
volgende gewicht: 66lbs (30 kg).
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載重
量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
本
製品は、モニター1台あたり66lbs(30kg)まで支持できます。
Height
The CPU Holder has a height range of 14.05” (357mm) - 21.9” (557mm).
1. Push and hold the two Adjustment Buttons on either side of the Height
Adjustment Bars.
2. To adjust the height of the CPU Holder either:
• Slide the Height Adjustment Bars toward the base of the CPU Holder to decrease
the height of the CPU Holder.
• Slide the Height Adjustment Bars away from the base of the CPU Holder to
increase the height of the CPU Holder.
3. Once you have reached the desired height align the Height Adjustment Buttons
with the Adjustment Holes, an audible click will indicate that the Height
Adjustment Bars are locked in place.
Moving the CPU Holder
The CPU Holder can rotate 360 degree and slide along the Rails, accommodating
multiple mounting positions.
Product Warnings
Warning Statements
• Make sure that you assemble this product according to the instructions.
• Make sure that the weight of the mounted equipment doesn’t exceed the weight
capacity of this product, max 66 lbs (30 kg).
Varningsmeddelande
• Se till att du monterar produkten i enlighet med instruktionerna.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan orsaka
skada på person eller egendom. Denna produkt har stöd för följande vikter: 66 lbs
(30 kg).
Avertissements
• Assemblez ce produit conformément aux instructions.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit peut
entraîner des blessures ou des dommages matériels. Ce produit peut supporter 66
lbs (30 kg).
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen. Dieses
Produkt ist für folgendes Gewicht geeignet: 66 lbs (30 kg).