StarTech.com DKM30CHDPDUE User Manual
Displayed below is the user manual for DKM30CHDPDUE by StarTech.com which is a product in the Notebook Docks & Port Replicators category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 7, 2021 4:07 PM
USB-C™ Single Monitor Docking Station - DisplayPort or VGA - 3x USB-A / 1x USB-C - GbE - 65W PD
Product Diagram (DKM30CHDPD/ DKM30CHDPDUE)
Component Function
1USB-C Port
• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)
• Connect a USB-C Peripheral Device to the
USB-C Docking Station
2USB-A Battery
Charging Port
• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)
• Supports up to 5V at 1.5A, 7.5W charging
• Connect a USB-A Peripheral Device to the
USB-C Docking Station
• Fast-charge USB Peripheral Devices
that comply with USB Battery Charging
specication Revision 1.2
33.5mm Audio Port • 4 Position Audio Jack for Headset use
• Connect an Audio Device
4Power Button
• Power the USB-C Docking Station on and o
• Integrated LED Indicator is illuminated white
when the USB-C Docking Station is powered
on
5USB-A Port x 2
• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)
• Connect USB-A Peripheral Devices to the
USB-C Docking Station
6Lock/Nano Lock Slots
• Connect a K-Slot or Nano K-Slot Style
Locking Device
• Deter theft of the USB-C Docking Station
7RJ45 Port • Connect a Network Device
8RJ45 LEDs (above the
RJ45 Port)
• Left (Link Speed) LED:
• Amber = 1Gb
• Green = 100Mb
• None = 10Mb
• Right (Link State) LED:
• Solid Green = Link Detected
• Flashing Green = Network Activity
9VGA Port • Connect a VGA Enabled Display Device
10 DisplayPort Port • Connect a DisplayPort Enabled Display
Device
11 USB-C Host Port
• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)
• Power Delivery 3.0 Specication
• Connect a Host Laptop, using the Locking
USB-C Host Cable
12 DC Power Input Port
• Connect the Universal Power Adapter to
supply power to the USB-C Docking Station
• Type-N barrel connector
• 19.5V 6.15A
Product Infomation
For the latest product information, technical specications, manuals, and Declarations
of Conformance please visit: www.startech.com/DKM30CHDPD or www.startech.com/
DKM30CHDPDUE
123 4
5
6
5 7/8 9 10 11 12
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety
hazards.
Mesures de sécurité
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et acheminés de façon à éviter tout
risque électrique, de chute ou de sécurité
安全対策
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性
など、安全上のリスクを回避するようにしてください。
Misure di sicurezza
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da evitare pericoli di inciampo,
rischi di scosse elettriche o pericoli per la sicurezza.
Säkerhetsåtgärder
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra
olyckor kan undvikas.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Connect Peripherals
1. Connect an Audio Device to the 3.5 mm Audio Port on the USB-C Docking
Station.
2. (Optional) Connect a USB-A Storage Device or other USB-A Peripheral to the
USB-A Ports on the front, side and/or rear of the USB-C Docking Station. Connect
up to 3 total USB-A Devices.
3. Connect a Network Device to the USB-C Docking Station, using a Cat5e/6
Network Cable.
Power the Docking Station
1. Select the appropriate regional Power Cord and connect it to the Universal Power
Adapter.
2. Connect the Universal Power Adapter to the DC 19.5V Port on the rear of the
USB-C Docking Station and to an AC Electrical Outlet.
3. (Optional) Press and release the Power Button to power the USB-C Docking
Station o and on. The USB-C Docking Station will be powered on by default
when the Universal Power Adapter is rst connected.
(Optional) Mounting
• To install a Mounting Bracket (sold separately), fasten the Mounting Bracket
to the USB-C Docking Station, using the appropriate Screws. The Screw length
should equal the thickness of the Mounting Bracket plus 2-4 mm.
Package Contents
• USB-C Dock x 1
• Locking USB-C Host Cable x 1
• (DKM30CHDPD) Universal Power Adapter (NA/JP, ANZ) x 1
• (DKM30CHDPDUE) Universal Power Adapter (UK, EU x 1)
• Quick-Start Guide x 1
Installation
Install Drivers
• Drivers will automatically install with an internet connection on Windows 10, macOS,
ChromeOS, and Ubuntu. If drivers do not auto-install, please visit www.StarTech.
com/DKM30CHDPD or www.StarTech.com/DKM30CHDPDUE to download the latest
drivers.
Connect a Host
• Connect the Locking USB-C Cable (included) to the Locking USB-C Host Port on
the rear of the USB-C Docking Station and to a USB Port-C on the Host Laptop.
Connect the Display Devices
• Connect a DisplayPort Enabled Display Device to the DisplayPort Port on the rear
of the USB-C Docking Station using a DisplayPort Cable.
--or--
• Connect a VGA Enabled Display Device to the VGA Port on the rear of the USB-C
Docking Station using a VGA Cable.
• NOTE - VGA Port will be disabled when a DisplayPort Enabled Display Device is
connected to the USB-C Docking Station.