StarTech.com FCREADUOTGDB User Manual
Displayed below is the user manual for FCREADUOTGDB by StarTech.com which is a product in the Card Readers category. This manual has pages.
Related Manuals
Instruction manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 08/13/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/FCREADUOTGDB.
Packaging contents
• 1 x memory card reader dongle
• 1 x instruction manual
System requirements
• A device (smartphone, tablet, and so on) that is enabled with
Micro USB On-The-Go technology
System requirements are subject to change. For the latest
requirements, please visit www.startech.com/FCREADUOTGDB.
FCREADUOTGDB
Memory Card Reader Dongle - Micro USB On-The-Go
*actual product may vary from photos
Product diagram
Introduction
The memory card reader dongle enables you to connect your
portable devices with USB OTG, such as a smartphone or a tablet, to
a wide variety of memory cards including SD cards, Micro SD cards,
USB ash drives, or HDDs.
Use the memory card reader
To access the data stored on your SD card, Micro SD card, or USB
ash drive, complete the following:
1. Depending on the type of memory card that you’re using, insert
the memory card in the appropriate slot on the memory card
reader.
2. Connect the integrated Micro USB 2.0 cable on the memory card
reader to the Micro USB port on your portable device, such as a
smartphone or tablet.
3. Access the stored data on the connected portable device.
Note: The memory card reader doesn’t require a power source for
standard card reader operations.
Connect a USB peripheral device
1. Connect the USB cable from the peripheral device to the USB A
port on the memory card reader.
2. Connect a Micro USB cable (not included) to the power source
port on the card reader to an available USB power source.
3. If you require additional power, connect the integrated Micro USB
2.0 cable on the memory card reader to the Micro USB port on
your portable device, such as a smartphone or tablet.
About the LED indicators
The memory card reader has two LED indicators located on the top
of the unit. For more information about what the LEDs indicate,
consult the tables below.
Yellow power LED
LED behavior Signies
LED is not illuminated There is no power source connected to
the memory card reader.
LED is illuminated A power source is connected to the
memory card reader.
Blue link and activity LED
LED behavior Signies
LED is not
illuminated
No memory cards are inserted in the
memory card reader.
LED is illuminated A memory card is inserted in the memory
card reader.
LED is blinking The memory card reader is completing a
process.
Micro USB 2.0 input
Power source
port
Micro SD card slot
USB A port
SD card slot
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.