StarTech.com FPWHANGER User Manual
Displayed below is the user manual for FPWHANGER by StarTech.com which is a product in the TV Mounts category. This manual has pages.
Related Manuals
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
Mesures de sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
Misure di sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Make sure to assemble this product according to the instructions. Failure to
do so might result in personal injury or property damage.
• Never use this product if parts are missing or damaged.
• The wall structure should be capable of supporting at least four times the
weight of the mounted equipment.
• The mounting hardware included with this product may not be adequate for
installation on certain wall structures. Failure to comply with these warnings
may result in personal injury or damage to the equipment.
• If you lack the necessary expertise to attach this product to the wall structure
that you’re using, contact a construction professional to install the wall
mount or to provide specic mounting instructions for your wall structure.
• Make sure that the weight of the TV doesn’t exceed the weight capacity
of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the equipment. This product can support the
following weight: Up to 110 lb. (50 kg).
Mensagens de Aviso
• Certique-se de que monta este produto de acordo com as instruções.
O incumprimento pode resultar em ferimentos pessoais ou danos de
propriedade.
• Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
• As estruturas de parede variam e é importante certicar-se de que o tipo de
estrutura de parede e hardware de montagem que está a usar irá suportar
devidamente o equipamento montado. O incumprimento pode resultar
em ferimentos pessoais e/ou danos no equipamento. A estrutura de parede
deve ser capaz de suportar pelo menos quatro vezes o peso do equipamento
montado.
• O hardware de montagem incluído com este produto pode não ser
adequado para algumas estruturas de parede. Se não tiver o conhecimento
necessário para xar este produto à estrutura de parede que está a usar,
contacte um prossional de construção para fazer a instalação em parede ou
para fornecer instruções de montagem especícas para a sua estrutura de
parede.
• Certique-se de que o peso do monitor não excede a capacidade de peso
deste produto. Se exceder a capacidade de peso, pode sofrer ferimentos
pessoais ou danos no equipamento. Este produto pode suportar o seguinte
peso: 50 kg.
iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna. Om du inte
gör det kan skada på person eller egendom uppstå.
• Använd aldrig produkten om delar saknas eller är skadade.
• Eftersom väggstrukturer varierar är det viktigt att kontrollera att
väggstrukturen och monteringsutrustningen som du använder klarar av
den monterade utrustningen. Om du inte gör det kan skada på person och/
eller utrustning uppstå. Väggstrukturen ska kunna klara av minst fyra gånger
vikten av den monterade utrustningen.
• Monteringsutrustningen som medföljer produkten kanske inte är lämplig för
vissa väggstrukturer. Om du saknar nödvändiga kunskaper för att fästa denna
produkt på väggstrukturen som du använder, kontakta en professionell
konstruktör för att installera väggmonteringen eller för att ge specika
monteringsinstruktioner för din väggstruktur.
• Se till att skärmens vikt inte överstiger produktens viktkapacitet. Om
viktkapaciteten överstigs kan skada på person eller utrustning uppstå. Denna
produkt har stöd för följande vikter: 50 kg.
Advertencias de Uso
• Asegúrese de ensamblar este producto según las instrucciones. De lo
contrario, pueden producirse lesiones personales o daños en la propiedad.
• Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
• Las estructuras de las paredes pueden variar y, por tanto, es importante
determinar con certeza que el tipo de estructura de la pared y el hardware
de montaje que se va a utilizar puedan soportar debidamente el equipo. De
lo contrario, se pueden producir lesiones personales o daños en el mismo. La
estructura de la pared debe ser capaz de soportar al menos cuatro veces el
peso del componente instalado.
• El hardware de montaje incluido con este producto puede no ser adecuado
para algunas estructuras de pared. Si no tiene la experiencia suciente para
jar este producto a la estructura de la pared correspondiente, póngase en
contacto con un profesional de la construcción para instalar el soporte de
pared o para que le proporcione las instrucciones especícas de montaje
para su estructura de pared.
• Asegúrese de que el peso del monitor no exceda la capacidad de carga de
este producto. Si se excede dicha capacidad se podrían producirse lesiones
personales o daños al equipo. Este producto tiene la siguiente capacidad de
carga: 50 kilogramos.
v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Avertissements
• Assemblez ce produit conformément aux instructions. Si vous ne respectez
pas ces instructions, vous risquez de vous blesser ou d’endommager
l’équipement.
• N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
• Les structures des murs varient. Vous devez impérativement vérier que
le type de mur et le matériel de xation que vous utilisez permettent de
soutenir correctement l’équipement. Dans le cas contraire, vous risquez des
blessures corporelles ou des dommages matériels. La structure du mur doit
pouvoir supporter au moins quatre fois le poids de l’équipement monté.
• Le matériel de xation inclus avec ce produit n’est pas forcément approprié
pour toutes les structures de murs. Si vous ne disposez pas des compétences
nécessaires pour installer ce produit au mur, contactez un professionnel
an qu’il installe le support mural ou qu’il vous fournisse les instructions de
montage spéciques à votre structure de mur.
• Vériez que le poids du moniteur ne dépasse pas la capacité pondérale du
produit. Si vous dépassez la capacité pondérale, vous risquez des blessures
corporelles ou des dommages matériels. Ce produit peut supporter de 50 kg.
Waarschuwingen
• Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit
niet goed gebeurt kan lichamelijk letsel of materiële schade ontstaan.
• Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
• Omdat wanden verschillen, is het belangrijk dat u ervoor zorgt dat het type
wandstructuur en de montagemiddelen die u gebruikt de gemonteerde
apparatuur goed ondersteunen. Indien u dit niet doet kan lichamelijk
letsel en/of schade aan de apparatuur ontstaan. De wandstructuur moet
voldoende zijn om ten minste vier keer het gewicht van de gemonteerde
apparatuur te ondersteunen.
• De bij dit product geleverde montagemiddelen kunnen niet geschikt zijn
voor sommige wandstructuren. Als u onvoldoende kennis hebt om dit
product aan de door u gebruikte wandstructuur te bevestigen, neem dan
contact op met een bouwkundige om de steun aan de muur te installeren of
specieke montage-instructies voor uw wandstructuur te geven.
• niet overschrijdt. Als u de gewichtscapaciteit overschrijdt, kan persoonlijk
letsel of schade aan de apparatuur ontstaan. Dit product ondersteunt het
volgende gewicht: 50 kg.
vi
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warnhinweise
• Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann
dies zu Verletzungen von Personen oder Schäden an Eigentum führen.
• Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt
sind.
• Wandstrukturen unterscheiden sich, und es muss sichergestellt werden,
dass die Wand und das verwendete Montagematerial das montierte Gerät
halten kann. Anderenfalls kann dies zu Verletzungen von Personen und/oder
Schäden an Geräten führen. Die Wand muss mindestens das Vierfache des
Gewichts des montierten Geräts halten können.
• Das mitgelieferte Montagematerial ist möglicherweise nicht für jede Wand
geeignet. Wenn Ihnen die nötigen Fachkenntnisse zum Anbringen dieses
Produkts an einer Wand fehlen, lassen Sie einen Fachmann den Wandhalter
anbringen, oder lassen Sie sich von einem Fachmann Montageanweisungen
für Ihre Wand erteilen.
• Das Gewicht des TVs darf die zulässige Traglast des Produkts nicht
übersteigen. Wenn die Traglast überschritten wird, kann dies zu Verletzungen
von Personen oder Schäden an Geräten führen. Dieses Produkt ist für
folgendes Gewicht geeignet: 50 kg.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。取り扱いを誤
った場合に、傷害を負う恐れや物的損害が発生する恐れがあります。
• 本製品で使用している部品の一部が紛失していたり損傷している状態で使
用するのは絶対に止めて下さい。
• 壁の構造はお客様の環境ごとに異なります。ご使用になる壁の構造タイプ
と取付け金具が、取り付けモニターを確実に支持することを確認して下さ
い。確認を怠った場合、傷害を負う恐れや物的損害が発生する恐れがあり
ます。壁の構造が、取り付けるモニター重量の最低４倍まで支持できるだけ
の強度を持っていなければなりません。
• 本製品に同梱されている取付け金具は、ご使用になる壁の構造に対して十
分ではない場合があります。本製品を壁面に取り付ける時、十分な専門知
識が不足していると判断された場合、専門業者に連絡を取って、本製品の取
り付けを行ってもらうか、お客様の壁の構造に適した取り付け方法を教えて
もらってから取り付けを行って下さい。
• 取り付けるモニターの重量が、本製品で定められた最大積載重量を超えな
いようにして下さい。最大積載重量をオーバーした場合、傷害を負う恐れや
モニターや本製品に損害が発生する恐れがあります。本製品は、最大50kg
までのモニター重量に対応しています。
vii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Dichiarazioni di avvertenza
• Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle
istruzioni potrebbe causare danni a persone o proprietà.
• Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
• Le caratteristiche dei muri sono variabili ed è importante vericare che
la struttura muraria e l’hardware di montaggio in uso siano in grado di
supportare adeguatamente le apparecchiature montate. Il mancato rispetto
delle istruzioni potrebbe causare danni a persone o proprietà. La struttura
muraria deve essere in grado di supportare un peso almeno quattro volte
superiore a quello dell’apparecchiatura montata.
• L’hardware di montaggio incluso con il prodotto potrebbe non essere
adeguato ad alcune strutture murarie. Se l’utente non dispone delle
competenze necessarie per agganciare il prodotto alla struttura muraria
in uso, dovrà contattare un professionista edile per installare il supporto a
parete o ottenere istruzioni di montaggio per la struttura muraria in uso.
• Vericare che il peso del monitor non superi la capacità di supporto del
prodotto. In caso di superamento della capacità di supporto potrebbero
vericarsi danni a persone o apparecchiature. Il prodotto è in grado di
supportare i seguenti pesi: 50 kg.
Table of Contents
Compliance Statements ........................................................................i
Safety Statements ..................................................................................ii
Warning Statements ..............................................................................iii
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Side View ...................................................................................................................................................... 2
Product Dimensions ..............................................................................3
Front View .................................................................................................................................................... 3
Side View ...................................................................................................................................................... 3
Product Information ..............................................................................4
Package Contents .....................................................................................................................................4
Requirements .........................................................................................6
Technical Specications .......................................................................................................................... 7
Installation ..............................................................................................9
Fasten the Wall Mount Assembly to a Wall ...................................................................................... 9
Display Mounting Bracket Installation .............................................................................................. 11
Tilt Spacers Installation ........................................................................................................................... 13
Hang the TV on the Wall Mount Assembly ......................................................................................14
Operation ................................................................................................15
Remove the TV from the Wall Mount Assembly ............................................................................ 15
Warranty Information ............................................................................ 17
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
Components Function
1Wall Mount
Assembly
• Mount for the Display Mounting
Bracket
• Evenly distributes the weight of the
TV across the Mounting Surface
2Spacers - Large
or Small
• Use Spacers - Large for a 0° tilt
• Use Spacers - Small for a -5° tilt
• Prevents TV from coming into
contact with the Mounting Surface
1
2
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Side View
Components Function
1Display Mounting
Bracket
• Attaches to the TV
• Hangs on the Wall Mount
Assembly to mount the TV
2Quick Release
Cord
• Pull the bottom of the Quick
Release Cord to release the
Spring Locks that hold the
Display Mounting Bracket
onto the Wall Mount
Assembly
• Pull the bottom of the Quick
Release Cord to reengage the
Spring Locks
• Approximate length - 740 mm
2
1
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Front View
Side View
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Wall Mount
Assembly
Qty: 1
Display Mounting
Bracket
Qty: 1
Tilt Spacers -
Large
Qty: 2
Tilt Spacers -
Small
Qty: 2
M5 x 14 mm
Screws
Qty: 4
M6 x 14 mm
Screws
Qty: 4
M6 x 30 mm
Screws
Qty: 4
M8 x 30 mm
Screws
Qty: 4
M8 x 50 mm
Screws
Qty: 4
Washers - Small
Qty: 4
Washers -
Medium
Qty: 4
Mounting
Spacers - Short
Qty: 8
5
Mounting
Spacers - Long
Qty: 8
Mounting Screws
Qty: 4
Concrete
Anchors
Qty: 4
Washers - Large
Qty: 4
Nails
Qty: 20
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
For the latest requirements, please visit
www.startech.com/FPWHANGER
• #2 and #4 Phillips® Head Screwdrivers
• Hammer
• Spirit/Bubble Level
• Mounting Surface
• (Optional) Two People for the Installation
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
Type of Measurement Measurement
Screen Size
37” - 80”
Weight Capacity
Up to 110 lb. (50 kg)
VESA Compatible 200 x 200
300 x 200
300 x 300
400 x 200
400 x 300
400 x 400
600 x 400
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Minimum Prole to Wall
1.2” (31 mm)
Curved TV
Compatible
Tilt Range
0°
-5°
Direction Indicator
Yes
Figure 1
Nails
Wall Mount Assembly
9
Installation
Fasten the Wall Mount Assembly to a Wall
Warnings! The Display Mount for Stud-less Walls is
designed to be installed into on a drywall, wood stud, or solid
concrete wall. The Mounting Hardware (Mounting
Screws and Concrete Anchors) included with this
product may not be adequate for installation on certain wall
structures. Ensure the Drywall Surface has the structural
integrity to support the weight of the Mount and TV. If you
lack the necessary expertise to attach this product contact a
Construction Professional to install the Display Mount for
Stud-less Walls. Failure to do so may result in personal injury
and/or equipment damage.
The Display Mount for Stud-less Walls is intended for
indoor use only and should not be used outdoors.
There are three ways to congure the installation for the
Display Mount for Stud-less Walls. See Figure 1, 2 and 3 for
more details.
Nails into Drywall
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting Screws with Concrete Anchors into Concrete Wall
Mounting Screws into Wood Studs
Figure 3
X = Distance between Studs.
Figure 2
Concrete Anchors
Mounting Screws
Washers - Large
Mounting Screws
Washers - Large
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Display Mounting Bracket Installation
1. Place your TV on a padded surface, screen side down, so
that you can access the back of the TV.
2. (Optional) Identify and remove the pre-installed VESA
Hardware from the back of the TV.
Note: Not all TVs will have placeholder VESA Hardware.
Ensure you are only removing the four Screws for the VESA
Mount. Do not remove any of the screws from your TV’s
structural assembly.
3. (Optional) To shorten the depth of the VESA Mounting
Holes to ensure a correct t for the M-Type Screws, place
the necessary number of Mounting Spacers - Short and/
or Long over the top two VESA Mounting Holes. Use the
Spacer Combination Table to determine the number of
Mounting Spacers for the application.
Screw Type Spacer Combination
M6 x 30 mm
M8 x 30 mm
M8 x 50 mm
11
12
4. Center the Display Mounting Bracket onto the back of the
TV. Align the Holes in the Display Mounting Bracket over
the top two VESA Mounting Holes in the back of the TV.
The Direction Indicator on the Display Mounting Bracket
should be pointing towards the top of the TV. (Figure 4)
5. Place a Washer - Medium onto the Display Mounting
Bracket. Align the hole in the Washer - Medium with
the VESA Mounting Hole. Repeat for the second VESA
Mounting Hole.
6. Thread the appropriately sized M-Type Screws (ex. M5 x
14 mm Screws) through the Washers - Medium, Display
Mounting Bracket, (Optional) Mounting Spacers, and into
your TV. (Figure 5)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 4
Display Mounting
Bracket
Direction
Indicator
Figure 5
13
7. Tighten the M-Type Screws with the Phillips Head
Screwdriver.
Warning! Do not over-tighten the M-Type Screws. If you
encounter any unexpected resistance as you are fastening
these Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
Tilt Spacers Installation
1. (Optional) Place the necessary number of Mounting
Spacers - Short and/or Long over the bottom two VESA
Mounting Holes in the back of the TV. Use the Spacer
Combination Table (Page 11) to determine the number of
Spacers for the application.
2. Place a Tilt Spacer (Large for 0° of tilt and Small for -5° of
tilt) over one of the VESA Mounting Holes. Align the hole in
the Tilt Spacer with the VESA Mounting Hole. Repeat for
the second VESA Mounting Hole.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Washers -
Medium
Mounting
Spacers
M-Type
Screw
Display
Mounting
Bracket
14
3. Place a Washer-Medium into the hole in each of the Tilt
Spacers.
4. Thread two appropriately sized M-Type Screws (ex. M5 x 14
mm Screws) through each of the Washers - Medium, Tilt
Spacers, (Optional) Mounting Spacers, and into your TV.
(Figure 6)
5. Tighten the M-Type Screws with the Phillips Head
Screwdriver.
Warning! Do not over-tighten the M-Type Screws. If you
encounter any unexpected resistance as you are fastening
these Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
Hang the TV on the Wall Mount Assembly
1. Pull the Quick Release Cord down to unlock the Spring
Locks in the Wall Mount Assembly.
2. With two people: lift and hang the TV onto the Wall Mount
Assembly. Ensure the V-Shaped Lip on the Display
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 6
M-Type
Screw
Washers -
Medium
Tilt Spacers
Mounting
Spacers
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting Bracket ts into the V-Shaped Groove on the
Wall Mount Assembly. (Figure 7)
3. Pull the Quick Release Cord down to lock the Spring Locks
in the Wall Mount Assembly.
Operation
Remove the TV from the Wall Mount Assembly
1. Pull the Quick Release Cord down to unlock the Spring
Locks in the Wall Mount Assembly.
2. (Optional - Two People) Lift the TV o of the Wall Mount
Assembly. (Figure 8)
Figure 7
V-Shaped Lip
V-Shaped
Groove
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 8
Quick Release Cord
17
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that bridge
the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd.,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support