StarTech.com HB30C3AGEPD User Manual
Displayed below is the user manual for HB30C3AGEPD by StarTech.com which is a product in the Notebook Docks & Port Replicators category. This manual has pages.
Related Manuals
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
For the latest information, technical specications, and support for
this product, please visit www.startech.com/HB30C3AGEPD
Package Contents
1 x USB hub
1 x quick-start guide
Requirements
• A laptop computer equipped with USB-C.
• A USB-C power adapter such as your laptop’s USB-C based power
adapter.
• Up to three USB peripheral devices with cabling.
• A network gateway such as a router or switch.
HB30C3AGEPD
3-Port USB 3.0 Hub plus Gigabit Ethernet and Power Delivery - USB-C
*actual product may vary from photos
USB Type-A hub ports
Integrated
USB Type-C host cable
USB Type-C
charge port
10/100/1000 Ethernet port
Introduction
This USB 3.0 hub with built-in Gigabit Ethernet turns your laptop’s
USB-C™ port into three USB-A ports and one GbE port. Unlike some
USB-C™ hubs that occupy your laptop’s only USB-C port, this USB
hub features USB Power Delivery, enabling you to power and charge
your laptop while you’re using the hub.
Product diagram
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps. Any mention of USB 3.0 in this manual
or on the StarTech.com website refers to the 5Gbps USB 3.1 Gen 1
standard.
About USB Power Delivery 2.0
• USB Power Delivery 2.0 is a specication that allows power (up to
100 watts) to be sent over a USB-C or Thunderbolt™ 3 cable that
supports the specication.
• This hub supports USB Power Delivery 2.0 and will deliver up to 60
watts of power through the USB-C or Thunderbolt 3 port on your
laptop.
• The adapter can connect to a host laptop’s USB-C port that doesn’t
support USB Power Delivery 2.0. However, in this conguration if
a power adapter is connected to the multifunction adapter, it will
not pass power through to your host laptop.
Manual Revision: 03/14/2017
About USB-C
• Not all USB-C ports support the full functionality of the USB
Type-C standard. Some ports might only provide data transfers,
and might not support USB Power Delivery 2.0.
• To power and charge your laptop through its USB-C host port,
ensure that your host laptop supports USB Power Delivery 2.0.
• If your laptop does not support USB Power Delivery, then the hub
will be powered by your laptop’s host USB-C port.
• Thunderbolt 3 also uses the USB-C connector, so you can connect
the adapter to a Thunderbolt 3 port. The adapter will connect to
the Thunderbolt 3 port at the USB speed of 5Gbps.
About the hub’s USB Type-C charge port
• The hub’s USB Type-C charge port only supports USB Power
Delivery 2.0.
• The USB Type-C charge port cannot be used for data or video
throughput.
• You can only connect a USB-C power adapter to the USB Type-C
charge port.
Connection and
activity LEDs
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Installation
1. Connect the integrated USB Type-C host cable to a USB-C port
on your computer.
2. Connect each of your USB peripheral devices to the USB Type-A
hub ports.
3. Connect an RJ-45 network cable from your network gateway
(router or switch) to the 10/100/1000 Ethernet port.
4. (Optional) Connect your laptop’s USB-C power cable to the hub’s
USB Type-C charge port.
Note: If you do not connect your laptop’s power adapter, the
hub may not provide sucient power to all of your connected
peripherals.
About the LED indicators
The adapter features two LED indicators:
• The LED to the left of the Ethernet port illuminates green to
indicate that an RJ-45 Ethernet cable is connected to the adapter.
• The LED to the right of the Ethernet port illuminates yellow to
indicate activity.