Table of Contents
StarTech.com HSB100SATBK User Manual
Displayed below is the user manual for HSB100SATBK by StarTech.com which is a product in the Drive Bay Panels category. This manual has pages.
Related Manuals
Manual Revision: 02/13/2019
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
HSB100SATBK
5.25in Trayless Hot Swap Mobile Rack
for 3.5in Hard Drive
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................ 1
Packaging Contents ................................................................................................................................. 1
System Requirements ..............................................................................................................................1
Installation ..............................................................................................2
Installing the removable drive frame in the computer ............................................................... 2
Connecting the drive activity indicator ............................................................................................ 3
Installing the hard drive into the drive frame ................................................................................3
Removing the hard drive from the drive frame ............................................................................. 3
Specications .......................................................................................... 4
Technical Support ..................................................................................5
Warranty Information ............................................................................ 5
Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com trayless SATA hard drive bay. Now, you can
enjoy a truly portable storage solution, with the ability to insert and remove a bare
SATA drive without having to mount it in a drive tray or drawer.
Packaging Contents
• 1 x 5.25” Trayless SATA Hot Swap Drive Bay
• 1 x Manual
• 1 x Screw kit
• 2 x Keys
• 1 x Drive Activity LED w/ Pin Wires
System Requirements
• An available 5.25” drive bay
• 3.5” SATA hard drive
Instruction Manual
2
Installation
To ensure a quick and easy installation, please read through this section before
attempting to install this device.
WARNINGS: Hard drives require careful handling, especially when being transported.
If you are not careful with your hard disk, it may result in lost data. Always handle your
hard drive with caution.
Hard drives, like all computer equipment can also be severely damaged by static
electricity. Be sure that you are properly grounded before opening your computer case
or touching any components. StarTech.com recommends that you wear an antistatic
strap when installing any computer equipment. If an anti-static strap is unavailable,
discharge yourself of any static electricity build-up by touching a large grounded metal
surface (such as the computer case) for several seconds.
Do not bump, jar, or drop the device. Do not disconnect any cables or power sources
while the hard drive is active. This can result in data loss and possible damage to the
hard drive. Always make sure that your hard drive is fully spun down before removing
the device.
Installing the removable drive frame in the computer
1. Open your computer case. In most designs, the case is opened by removing two
or three screws at the rear of the case and then sliding the covering side panel
backward until it comes free. If your case is a tower style, ensure that you remove
the panel that will expose the top of the computer's motherboard. This is generally
the left-side panel.
Note: There are many dierent case designs, however, so if you are unsure of how to
open your particular case, consult the user manual for your case or contact your local
computer store for help.
2. Remove the cover of an empty drive bay.
3. Insert the drive frame into the bay through the empty slot, pushing inwards until
the screw holes from the frame are aligned with the holes provided by the drive bay.
4. Secure the frame in the drive bay by inserting and tightening the screws provided,
into the holes of the drive bay, and the newly inserted frame.
Instruction Manual
3
5. Connect the SATA power cable and the SATA data cables to the appropriate ports
provided on the back of the rear panel of the drive frame.
Connecting the drive activity indicator
• Connect the pre-installed LED Cables to the LED Indicator for the installed drive on
the Motherboard or Controller Card.
Installing the hard drive into the drive frame
1. Pull the spring lock to open the front door.
2. Position the hard drive near the entry of the frame, with the label of the hard drive
facing up, and the rear panel of the hard drive aimed towards the inside of the
computer.
3. Gently push the drive into the frame until the locking arm begins to close.
4. Secure the drive in the frame by continuing to close the locking arm. Gently apply
pressure to the locking arm, until you hear the ‘click’ of the spring lock.
5. Optional: To lock the drive in the frame, insert the key provided into the keyhole at
the front of the drive bay. Turn the key 90° to the right, and remove the key.
Removing the hard drive from the drive frame
1. If you opted to lock the drive in place, insert the key into the keyhole. Turn the key
90° to the left, and remove the key.
2. Gently, but rmly open the locking arm until it is out of the path of the hard drive removal.
3. Once the locking arm is open, slowly pull the hard drive out of the frame.
4. Return the locking arm to the secured position.
Instruction Manual
4
Specications
Form Factor Serial ATA
Dimensions 184 x 149 x 42 (mm)
Interface SATA, SATA II , SATA III
Operating temperature 0° - 55°C
Insertion rating 50,000 insertions/removals
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.