StarTech.com ICUSB232INT1 User Manual
Displayed below is the user manual for ICUSB232INT1 by StarTech.com which is a product in the Interface Cards/Adapters category. This manual has pages.
Related Manuals
Manual Revision: 01/26/2012
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
ICUSB232INT1
ICUSB232INT2
1/ 2 Port Internal USB Motherboard Header
to DB9 Serial Adapter
*actual product may vary from photos
*ICUSB232INT2 shown
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................1
Packaging Contents .................................................................................................................................1
System Requirements .............................................................................................................................. 1
Installation ..............................................................................................2
Hardware Installation .............................................................................................................................. 2
Driver Installation ...................................................................................................................................... 2
Specications ..........................................................................................3
Specications ..........................................................................................5
Technical Support ..................................................................................6
Warranty Information ............................................................................6
Instruction Manual
1
Introduction
The StarTech.com Internal 1 or 2-Port USB to Serial Converter Adapter provides the
ability to add 1 or 2 RS232 serial ports to any desktop system equipped with an
available USB motherboard header. Unlike standard USB to serial cables, this cable
is designed for use inside the PC case, aording an entirely internal solution with no
mess or extra adapters needed. This compact and simple USB adapter oers a cost-
eective solution that bridges the compatibility gap between modern computers and
legacy serial peripherals. Backed by a StarTech.com 1 year warranty and free lifetime
technical support.
Packaging Contents
• 1 x Internal USB to Serial adapter
• 1 x Driver CD
• 1 x Low Prole bracket (2x for ICUSB232INT2)
• 1 x Instruction Manual
System Requirements
• Available 9-pin internal USB header
• Available rear expansion card slot (2 slots for 2-port low prole version)
• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Windows XP Embedded/CE 4.2/CE 5.0/CE 6.0,
or Apple® Mac OS® 9/10.4, or Linux® kernel 2.4/2.6
*1-Port model shown
*actual product may vary from photos
9-Pin IDC Connector
(Host)
9-Pin DB9 Connector
Instruction Manual
2
Installation
WARNING! Computer parts can be severely damaged by static electricity. Be sure
that you are properly grounded before opening your computer case. StarTech.
com recommends that you wear an anti-static strap when installing any computer
component. If an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface (such as the computer
case) for several seconds.
Hardware Installation
1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,
external hard drives, etc.). Unplug the power cable from the rear of the power
supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. Refer to documentation for your
computer system for details.
3. Locate an open expansion card slot on the rear of the computer case and remove
the metal cover plate.
4. Place the adapter’s expansion card bracket into the opening and fasten the bracket
to the rear of the case.
5. Locate a 9-pin USB header connector on the motherboard and plug in the IDC
connector on the cable. The IDC connector is keyed to help prevent incorrect
installation. See system or motherboard documentation for details.
6. Place the cover back onto the computer case.
7. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
Driver Installation
Windows 2000/XP/Server 2003
1. When the Found New Hardware wizard appears on the screen, insert the Driver CD
into your CD/DVD drive. If you are prompted to connect to Windows Update, please
select the “No, not this time” option and click Next.
2. Select the option “Install Drivers Automatically (Recommended)” and then click the
Next button.
3. Windows should now start searching for the drivers. Once this has completed, click
the Finish button.
Instruction Manual
3
Windows Vista/7/Server 2008 R2
1. When the Found New Hardware window appears on the screen, click on the “Locate
and install drivers software (recommended)” option. If prompted to search online,
select the “Don’t search online” option.
2. When prompted to insert the disc, insert the Driver CD that came with the card, into
your CD/DVD drive and Windows will automatically proceed to search the CD.
3. If a Windows Security dialog window appears, click the “Install this driver software
anyway” option to proceed.
4. Once the driver is installed, click the Close button.
Specications
ICUSB232INT1 ICUSB232INT2
Bus Interface USB 2.0
Form Factor Full/Low Prole
Chipset ID FTDI FT232R
Connectors 1 x DB9 male
1 x 9-pin IDC female
2 x DB9 male
1 x 9-pin IDC female
Supported Protocols RS232
Maximum Data Transfer
Rate 115.2 Kbps
Operating Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Storage Temperature -65°C ~ 85°C (-85°F ~ 185°F)
Integrated Cable Length 24 in
Weight 31 g 63 g
Compatible Operating
Systems
Windows 2000/ XP/ Server 2003/ Vista/
Server 2008 R2/ 7 (32/64-bit),
Windows XP Embedded,
Windows CE 4.2/ 5.0/ 6.0, Mac OS 9/10.4,
Linux kernel 2.4/2.6
Instruction Manual
4
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.