StarTech.com LTULOCKKEY User Manual
Displayed below is the user manual for LTULOCKKEY by StarTech.com which is a product in the Cable Locks category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 27, 2019 2:49 PM
Product Diagram (LTULOCKKEY)
Components Function
1Adapter Slot • Used to house the Adapter.
2Keyhole • Used to lock and unlock the Lock from a Lock
Slot.
3Key • Used to lock or unlock the Keyed Laptop Lock.
4Security Cable • Used to secure a Device to a secure stationary
object.
5Locking Hook • Used to connect the Lock to a Lock Port.
6Adapter
• Used to change the Lock head to
accommodate dierent lock slots.
• Standard Slot = 3x7 mm slot
• Wedge Slot = 3.2x4.5 mm slot
• Nano Slot = 2.5x6 mm slot
Universal Keyed Laptop Lock | Pivot and Rotate Hinge
Requirements
For the latest requirements, please visit www.startech.com/LTULOCKKEY
Installing a Lock Adapter
1. Select the Adapter that ts the Lock Slot on the Device you are securing.
2. With the Lock in an unlocked state, insert the Adapter into the Adapter Slot on the
Lock, making sure that the Lock Adapter is pushed all the way into the Adapter
Slot and ush with the Lock.
Note: The Adapter does not lock into the Adapter Slot until the Lock is inserted into
a Lock Slot and the Lock Button is engaged (pressed).
Securing a Device
Using the Key
1. Wrap the Security Cable around a secure stationary object and pull the Keyed
Laptop Lock through the loop on the Security Cable.
Security Cable
2. Insert the Key into the Lock. Push and turn the Key counter-clockwise until the
lock mechanism disengages the Lock Slot on a Laptop, Docking Station, or other
compatible Device.
3. Remove the Key from the Lock.
Using the Push-to-Lock Function
Note: In order to use this function the lock must be in the unlocked state.
1. Insert the Locking Hook into a Lock Slot on the Device.
2. Push the Lock button (key hole) to engage the locking mechanism.
1
2
5
3
4
6
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Unlocking a Device
1. Insert the Key into the Lock. Push and turn the Key clockwise to disengage the lock
mechanism from the Lock Slot.
2. Gently pull the Lock out of the Lock Slot.
3. Turn the Key a quarter turn counter-clockwise and remove it from the Lock.
Removing a Lock Adapter
1. Using the Key, unlock the Keyed Laptop Lock and remove it from the Device.
2. With the Keyed Laptop Lock unlocked, pull the Adapter out of the Adapter Slot.