StarTech.com MBLTVSTNDEC User Manual
Displayed below is the user manual for MBLTVSTNDEC by StarTech.com which is a product in the TV Mounts category. This manual has pages.
Related Manuals
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
Mesures de sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
Misure di sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Assemble this product according to the instructions.
• Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage.
• Weight capacity of the multimedia shelf: 5 kg (11 lb.)
• Weight capacity of the TV mount: 70 kg (154 lb.)
• Do not allow children to climb on this product, or use this product without
proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Assembling this product is a two-person task. Do not attempt to assemble
this product and install equipment without assistance.
• Before adding equipment to this product, ensure the product has been
properly assembled and installed, and that the product can support the
weight of the added equipment.
• Make sure all of the equipment has been properly installed before adjusting
this product.
• Do not move the cart over cords, cables, or uneven surfaces.
• Before moving the cart, unlock the casters.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
• Viktkapacitet multimedia hylla: 5 kg
• Viktkapacitet fäste för TV: 70 kg
• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt.
• Det krävs två personer för att montera produkten. Försök inte montera
produkten och installera utrustning utan hjälp.
iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Innan du lägger till utrustning på produkten, se till att produkten är korrekt
monterad, installerad och att produkten klarar av vikten på utrustningen som
du lägger till.
• Se till att all utrustning är korrekt installerad innan du börjar justera
produkten.
• Flytta inte vagnen över kablar eller ojämna ytor.
• Innan du börjar ytta på vagnen, se till att hjulen är upplåsta.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken.
• Gewichtscapaciteit van het multimedia oppervlak: 5 kg
• Gewichtscapaciteit van de schermbevestiging (voor televisie): 70 kg
• Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten worden
gebruikt.
• Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als u
weerstand voelt tijdens het vastdraaien van de schroeven, stop dan.
• Dit product moet met twee personen in elkaar worden gezet. Probeer dit
product niet zonder hulp in elkaar te zetten en apparatuur te installeren.
• Voordat u apparatuur aan dit product toevoegt, moet u ervoor zorgen dat
u het op de juiste manier in elkaar hebt gezet en geïnstalleerd, en dat het
product het gewicht van de toe te voegen apparatuur kan ondersteunen.
• Zorg dat u de apparatuur goed installeert voordat u met het aanpassen van
dit product begint.
• Rijd de wagen niet over snoeren, kabels of ongelijke oppervlakken.
• Voordat u de wagen gaat verplaatsen, moet u de zwenkwielen ontgrendelen.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解して
から組み立て作業を始めて下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載
重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
• マルチメディア棚の総耐荷重:5kg
v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• TVマウンタの総耐荷重:100kg
• 本製品に小さなお子様が乗って遊ばないようにして下さい。お子様が使用
する際には、適切な監視を怠らないようにして下さい。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
• 本製品を組み立てる際、ネジを締めすぎないようにして下さい。ネジを締め
ているうちに手応えを感じたら、締めるのを止めてください。
• 本製品は、二人がかりでの組み立てを想定しています。手助けなしに単独で
組み立てと設置を行わないで下さい。
• 本製品に装置を積載する前に、組み立てと設置が適切に行われたか確認し
て下さい。また、積載する装置の重量に本製品が対応しているか確認して
下さい。
• 転倒注意！モニタが一番高い位置にある状態でカートを動かさないで下さ
い。また、モニタを押してカートを動かすのはやめて下さい。
• コードやケーブルの上、または凹凸のある床面でカートを移動させないで
下さい。
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni.
• Portata massima del ripiano multimediale: 5 kg
• Portata massima del support per TV: 70 kg
• Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un’adeguata supervisione.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• Durante l’assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l’operazione.
• L’assemblaggio di questo prodotto richiede la presenza di due persone.
Non tentare di assemblare il prodotto e installare le apparecchiature senza
assistenza.
• Prima di aggiungere altre apparecchiature al prodotto, assicurarsi di averlo
assemblato e installato correttamente e che sia in grado di sostenere il peso
dell’apparecchiatura in questione.
• Assicurarsi di aver installato correttamente tutte le apparecchiature prima di
procedere alla regolazione del prodotto.
vi
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Non far passare il carrello sopra corde, cavi o superci irregolari.
• Prima di procedere allo spostamento del carrello, vericare di aver sbloccato
le rotelle.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels.
• Capacité de poids de l’étagère multimédia : 5 kg
• Capacité de poids du support d’écran : 70 kg
• N’autorisez pas les enfants à grimper sur ce produit ni à l’utiliser sans
surveillance.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Ne serrez pas trop les vis lors de l’assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer.
• L’assemblage de ce produit nécessite deux personnes. Ne tentez pas
d’assembler le produit et d’installer les équipements sans aide.
• Avant d’ajouter des équipements au produit, vériez que vous l’avez
correctement assemblé et installé, et que le produit peut supporter le poids
des équipements que vous y ajoutez.
• Veillez à installer correctement tous les équipements avant de commencer à
ajuster le produit.
• Ne faites pas rouler le meuble sur des cordons, des câbles ou des surfaces
inégales.
• Avant de déplacer le meuble, veillez à débloquer les roulettes.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Leia todo o manual e certique-se de que entende as instruções antes de
começar a montar e a utilizar este produto.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade.
• Capacidade de carga de la bandeja multimídia: 5 kg
• Capacidade de carga de suporte para TV: 70 kg
• Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão.
vii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar.
• Montar este produto é uma tarefa para duas pessoas. Não tentar montar este
produto e instalar o equipamento sem assistência.
• Antes de adicionar o equipamento a este produto, certique-se de que o
montou e instalou devidamente e de que o produto pode suportar o peso do
equipamento que está a adicionar ao mesmo.
• Certique-se de que instala devidamente todo o seu equipamento antes de
começar a ajustar este produto.
• Não mova o carro pelos os, cabos ou superfícies irregulares.
• Antes de começar a mover o carro, certique-se de que desbloqueia os
rodízios.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad.
• Capacidad de carga del estante multimedia: 5 kg
• Capacidad de carga del soporte de TV: 70 kg
• No permita que los niños se suban a este producto o que lo utilicen sin la
debida supervisión de un adulto.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si
al apretar los tornillos siente resistencia, no los apriete más.
• Se requieren dos personas para el ensamblaje de este producto. No intente
ensamblar este producto e instalar otros equipos sin la debida asistencia de
otra persona.
• Antes de instalar equipos en este producto, asegúrese de haberlo
ensamblado correctamente, a n de que pueda soportar el peso del equipo
que vaya a instalar.
• Asegúrese de que ha instalado todo el equipo correctamente antes de
efectuar ajustes de este producto.
viii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• No desplace el carrito encima de cables o supercies desniveladas.
• Antes de empezar a mover el carrito, asegúrese de haber desbloqueado
las ruedas. Antes de empezar a mover el carrito, asegúrese de haber
desbloqueado las ruedas.
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden
haben.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
• Gewichtskapazität des Multimedia Fachbodens: 5 kg
• Gewichtskapazität der TV Halterung: 70 kg
• Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt
ohne Aufsicht zu benutzen.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu
fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand
stoßen, stellen Sie das Anziehen ein.
• Die Montage dieses Produkts ist auf die Ausführung von zwei Personen
ausgelegt. Versuchen Sie nicht ohne Hilfe, dieses Produkt zu montieren und
Geräte zu installieren.
• Bevor Sie Geräte zu diesem Produkt hinzufügen, vergewissern Sie sich, dass
Sie es ordnungsgemäß montiert und installiert haben und dass das Produkt
das Gewicht der Geräte, die Sie hinzufügen möchten, tragen kann.
• Sorgen Sie dafür, dass all Ihre Geräte ordentlich installiert sind, bevor Sie
dieses Produkt justieren.
• Bewegen Sie den Wagen nicht über Leitungen, Kabel oder unebenes
Gelände.
• Stellen Sie sicher, dass die Rollen entriegelt sind, bevor Sie den Wagen in
Bewegung setzen.
Table of Contents
Compliance Statements ........................................................................i
Safety Statements ..................................................................................ii
Warning Statements ..............................................................................iii
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Back View .....................................................................................................................................................2
Product Dimensions ..............................................................................3
Front View .................................................................................................................................................... 3
Product Information ..............................................................................4
Package Contents .....................................................................................................................................4
Requirements .........................................................................................6
Technical Specications .......................................................................................................................... 7
Installation ..............................................................................................9
Attach the Casters .....................................................................................................................................9
Attach the Base Columns to the Base ................................................................................................10
Attach the Upper Columns to the Base Columns .......................................................................... 11
Install the Front Cover and Equipment Shelf .................................................................................. 12
(Optional -- For TVs with 600 x 200 mm or 600 x 400 mm Spaced VESA Mounting Holes)
Attach the VESA Extension Arms to the VESA Mounting Plate................................................. 13
Attach the VESA Mounting Plate to a TV .......................................................................................... 15
Mounting the TV........................................................................................................................................ 17
Set the Tilt of the TV ................................................................................................................................. 18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rotate the TV .............................................................................................................................................. 19
Cable Management ..................................................................................................................................20
Attach the Rear Cover ..............................................................................................................................21
Operation ................................................................................................22
Adjust the Tilt of the TV ........................................................................................................................... 22
Move the Mobile Cart Assembly.......................................................................................................... 23
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
Casters
Base
Columns
Upper
Columns
VESA Extension
Arms (L) VESA Extension
Arms (R)
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Back View
Base
Equipment
Shelf
Rear Bracket
Cover
Shelf Brackets
VESA Mounting
Plate VESA
Extension
Arms
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Front View
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Base
Qty: 1
Casters
Qty: 4
Base Columns
Qty: 2
Upper Columns
Qty: 2
Equipment Shelf
Qty: 1
Shelf Brackets
Qty: 2
Front Bracket
Cover
Qty: 1
VESA Mounting
Plate
Qty: 1
Rear Bracket
Cover
Qty: 2
VESA Extension
Arms (L)
Qty: 2
VESA Extension
Arms (R)
Qty: 2
Cable Covers
Qty: 4
5
M8 x 20 mm
Screws
Qty: 8
M6 x 8 mm
Screws
Qty: 8
M6 x 12 mm
Screws
Qty: 16
M6 x 18 mm
Screw
Qty: 1
M8 x 8 mm
Screws
Qty: 8
Cable Clip
Holders
Qty: 5
Cable Clips
Qty: 5
M6 Wrench
Qty: 1
M10 Wrench
Qty: 1
4 mm Hex Key
Qty: 1
5 mm Hex Key
Qty: 1
M5 x 14 mm
Round Head
Screws
Qty: 4
6
M6 x 14 mm
Screws
Qty: 4
M6 x 30 mm
Screws
Qty: 4
M8 x 30 mm
Screws
Qty: 4
M8 x 50 mm
Screws
Qty: 4
Rectangular
Washers
Qty: 4
Small Spacers
Qty: 8
Large Spacers
Qty: 8
User Manual
Qty: 1
Requirements
For the latest requirements, please visit
www.startech.com/MBLTVSTNDEC
• TV x 1
• Phillips Head Screwdriver x 1
• Scissors x 1
• Needle-Nose Pliers x 1
• (Optional) Media Device (e.g. DVD Player) x 1
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
Type of Measurement Measurement
Screen Size
37” - 70”
Weight Capacity TV -- Up to 154 lb. (70 kg)
Media Shelf -- Up to 11 lb.
(5 kg)
VESA Compatible 200 x 200 mm
300 x 300 mm
350 x 350 mm
400 x 200 mm
400 x 400 mm
600 x 200 mm
600 x 400 mm
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Tilt Range
0° or +5°
Rotation
0° ~ +90°
Cable Management
Yes
9
Installation
Note: Do not overtighten any of the screws.
Attach the Casters
1. Flip the Base upside down and place it onto a clean and at
surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert the four Casters into the holes, located in the bottom
of the Base and tighten, using the 10 mm Wrench.
3. Flip the Base upright.
4. Lock the Casters by pressing down on the Brake, located on
top of each of the four Casters. (Figure 2)
5. (For uneven surfaces) Flip the Base upside down and use the
Wrench to adjust the Nut located on each Caster.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Casters
Base
Figure 1
Figure 2
Brake
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Base Columns to the Base
1. Insert the Base Columns into the Base. Press rmly to
ensure the Base Columns have been fully inserted into the
Base. (Figure 3)
Note: Ensure the Cable Management Slots on each of the
Base Columns are facing the rear of the Mobile Cart and
are at the same height.
2. Insert two M8 x 20 mm Screws through the bottom of the
Base and into both Base Columns and partially tighten,
using the 5 mm Hex Key. These M8 x 20 mm Screws will be
tightened in another installation step.
Figure 3
Base
Cable
Management
Slots M8 x 20
mm Screws
5 mm
Hex Key
Base
Columns
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Upper Columns to the Base Columns
1. Slide one Shelf Bracket onto each Base Column. Slide the
Shelf Brackets past the Screw Holes, located in the Base
Columns. (Figure 4)
2. Insert the narrow end of the Upper Columns into the tops
of the Base Columns.
Note: Ensure the Cable Management Slots in the Upper
Columns are facing inwards.
3. Insert four M6 x 8 mm Screws into the holes located in the
front and rear of each Base Column and tighten, using the 4
mm Hex Key.
4. Slide the Shelf Brackets up to align the opening in each
Shelf Bracket with the inward facing holes on both Base
Columns.
5. Insert two M6 x 12 mm Screws into the inward facing holes
in both Base Columns and tighten, using an appropriately
sized Phillips Head Screwdriver.
11
Figure 4
Upper
Columns
Base
Columns
Shelf
Brackets
4 mm
Hex Key
M6 x 8 mm
Screws
Cable
Management
Slot
12
Install the Front Cover and Equipment Shelf
1. Align the holes in the sides of the Front Cover and the four
lowest inward facing holes on the Upper Columns. The
Directional Arrow on the Front Cover should be pointing
up and should only be visible from the rear of the Mobile
Cart. (Figure 5.1)
2. Thread all four M6 x 12 mm Screws through the holes in
the Front Cover and into the Upper Columns then tighten,
using a Phillips Head Screwdriver.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
Front Cover
Equipment
Shelf
M6 x 12
mm Screws
M6 x 12
mm Screws
M8 x
20 mm
Screws 5 mm Hex
Key
13
3. Angle the Equipment Shelf and slide the notch from one
side against one of the Upper Columns and the Shelf
Bracket. Tilt the other notch down onto the other Shelf
Bracket. The large overhanging portion should be facing the
rear of the Mobile Cart. (Figure 5.2)
4. Insert two M6 x 12 mm Screws through the bottoms of both
Shelf Brackets and into the Equipment Shelf and tighten,
using a Phillips Head Screwdriver. (Figure 5.3)
5. Tighten the two M8 x 20 mm Screws installed in step 2 of
Attach the Base Columns to the Base, using the 5 mm Hex
Key. (Figure 5.4)
(Optional -- For TVs with 600 x 200 mm or 600 x
400 mm Spaced VESA Mounting Holes) Attach the
VESA Extension Arms to the VESA Mounting Plate
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 6
VESA
Mounting
Plate
VESA
Extension
Arms
M8 x 8 mm
Screws
5 mm
Hex Key
14
1. Place the TV on a padded surface, screen side down, so the
back of the TV is accessible. (Figure 7)
2. (Optional) Identify and remove the pre-installed VESA
Hardware from the back of the TV.
Note: Not all TVs will have placeholder VESA Hardware.
Only remove the four Screws for the VESA Mount. Do not
remove any of the screws from the TV’s structural assembly.
3. (Optional -- for TVs with recessed VESA Mounting
Holes, for TVs with uneven rear geometry, or to adjust
the engagement depth of the provided Screws) Add the
necessary number of Small and/or Large Spacers between
the VESA Extension Arms (L+R) and TV.
4. Align the hole in the thin portion of the VESA Extension
Arms (L) with the VESA Mounting Holes on the left rear of
the TV. (Figure 6)
5. Repeat step 4 with the VESA Extension Arms (R) for the
right side.
6. Align the holes in the VESA Mounting Plate with the holes
in the VESA Extension Arms (L+R). The Directional Arrow
on the VESA Mounting Plate should be pointing towards
the top of the TV.
7. Insert eight M8 x 8 mm Screws through the VESA
Mounting Plate and into the VESA Extension Arms (L+R)
and tighten, using the 5 mm Hex Key.
8. Place a Rectangular Washer over each VESA Mounting
Hole.
9. Thread the appropriately sized M-Type Screws (e.g. M5 x
14 mm Screws) through the Rectangular Washers, VESA
Mounting Plate, (Optional) Spacers, and into the TV.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: Each Rectangular Washer features two holes. Select
the hole that ts the M-Type Screws.
10. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the TV Mounting Brackets.
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
Attach the VESA Mounting Plate to a TV
1. Place the TV on a padded surface, screen side down, so the
back of the TV is accessible. (Figure 7)
2. (Optional) Identify and remove the pre-installed VESA
Hardware from the back of the TV.
Figure 7
VESA
Mounting
Plate
TV
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note: Not all TVs will have placeholder VESA Hardware.
Only remove the four Screws for the VESA Mount. Do not
remove any of the screws from the TV’s structural assembly.
3. (Optional -- for TVs with recessed VESA Mounting
Holes, for TVs with uneven rear geometry, or to adjust
the engagement depth of the provided Screws) Add the
necessary number of Small and/or Large Spacers between
the VESA Mounting Plate and TV.
4. Align the VESA Mounting Holes in the VESA Mounting
Plate with the VESA Mounting Holes in the TV. The
Directional Arrow on the VESA Mounting Plate should be
pointing towards the top of the TV.
5. Place a Rectangular Washer over each VESA Mounting
Hole.
6. Thread the appropriately sized M-Type Screws (e.g. M5 x
14 mm Screws) through the Rectangular Washers, VESA
Mounting Plate, (Optional) Spacers, and into the TV.
Note: Each Rectangular Washer features two holes. Select
the hole that ts the M-Type Screws.
7. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the TV Mounting Brackets.
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the TV
1. Insert two M8 x 20 mm Screws into two uppermost inward-
facing holes in the Upper Columns and tighten until 10 mm
of the M8 x 20 mm Screw threads are exposed, using the 5
mm Hex Key. (Figure 8)
2. (Completed this step with Two People) Lift the TV, tilt
the top backwards slightly, and hook the top of the VESA
Mounting Plate onto the top two M8 x 20 mm Screws,
installed in step 1.
Figure 8
M8 x
20 mm
Screws
VESA
Mounting
Plate
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Set the Tilt of the TV
1. Fully hand-tighten the top M8 x 20 mm Screw on each
Upper Column. (Figure 9)
2. Loosen the top two M8 x 20 mm Screws on each Upper
Column by a quarter turn, using the 5 mm Hex Key.
Warning! Do not over-loosen or remove the M8 x 20 mm
Screws.
3. Tilt the TV to the desired setting and align the two lower
holes in the VESA Mounting Plate with the holes in the
Upper Columns.
4. Insert two M8 x 20 mm Screws through the holes in the
VESA Mounting Plate and into the Upper Columns and
tighten, using the 5 mm Hex Key.
5. Tighten the top two M8 x 20 mm Screws, using the 5 mm
Hex Key.
Figure 9
M8 x
20 mm
Screws
5 mm
Hex
Key
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rotate the TV
1. (Optional - to adjust the torque required to rotate the TV)
a. (Increase the torque required to rotate the TV) tighten
the Nuts on the VESA Mounting Plate, using the M10
Wrench. (Figure 10)
b. (Decrease the torque required to rotate the TV) loosen
the Nuts on the VESA Mounting Plate, using the M10
Wrench.
Figure 10
Nuts
10 mm
Wrench
Figure 11
M6 x 18
mm Screw
20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Rotate the TV to landscape view or portrait view.
3. Insert the M6 x 18 mm Screw into the hole located just
above (for landscape viewing) or to the side of (for portrait
viewing) the bolts in the VESA Mounting Plate and tighten,
using an appropriately sized Phillips Head Screwdriver.
(Figure 11)
Cable Management
Figure 12
Figure 13
Figure 15
Figure 14
Cable Clip
Holders
Cable Management
Slots - Panels
Needle-Nose Pliers
Cable
Clips
21
1. Route the Cables through the Cable Management Slots in
the Columns.
2. Peel the plastic backing o the Cable Clip Holders and stick
them to the desired locations within the VESA Mounting
Plate. (Figure 12)
Note: Excess slack can be coiled and secured using two
Cable Clips. (Figure 13)
3. Thread the Cable Clips through the Cable Clip Holders.
4. Secure the Cables with the Cable Clips and tighten.
5. (Optional) Remove up to two Panels from the notch in each
Cable Cover, using a pair of Needle-Nose Pliers. (Figure 14)
6. Insert the Cable Covers into the Cable Management Slots
in the Columns, routing the Cables through the notch in
each Cable Cover. (Figure 15)
Attach the Rear Cover
Figure 16
Rear
Cover
M6 x
12 mm
Screws
22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1. Place the Rear Cover over the VESA Mounting Plate and
Front Bracket Cover. Align the holes in the top of the Rear
Cover with the holes in the top of the VESA Mounting
Plate. Align the holes in the bottom of the Rear Cover with
the holes in the bottom of the Front Bracket Cover.
(Figure 16)
2. Insert four M6 x 12 mm Screws into the holes aligned in
step 1 and tighten, using an appropriately sized Phillips
Head Screwdriver.
Operation
Adjust the Tilt of the TV
1. Remove the four M6 x 12 mm Screws installed in step 2 of
Attach the Rear Cover.
2. Remove the Rear Cover.
3. Remove the bottom two M8 x 20 mm Screws, that attach
the VESA Mounting Plate to the Upper Columns, using the
5 mm Hex Key. (Figure 9)
4. Loosen the top two M8 x 20 mm Screws, that attach the
VESA Mounting Plate to the Upper Columns, a quarter
turn, using the 5 mm Hex Key.
Note: Do not over-loosen or remove the M8 x 20 mm
Screws.
5. Tilt the TV to and aligning the lower holes in the VESA
Mounting Plate with the holes in the Upper Columns.
6. Insert two M8 x 20 mm Screws through the holes in the
VESA Mounting Plate and into the Upper Columns.
Tighten, using the 5 mm Hex Key.
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
7. Tighten the top two M8 x 20 mm Screws, using the 5 mm
Hex Key.
Move the Mobile Cart Assembly
Warning! Never attempt to move the Mobile Cart
Assembly with one person. A minimum of two people are
required to move the Mobile TV Stand Assembly.
1. Unplug all the Cables connecting the Mobile Cart to any
Stationary Object (e.g. the wall, a media device, etc.).
2. Disengage the Brakes on the Casters.
3. Grip the TV and the Upper Columns and slowly move the
Mobile Cart Assembly, using two people. Ensure caution is
exercised around corners or when navigating over bumps
and/or uneven ground.
4. Lock the Brakes on the Casters.
24
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that bridge
the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd.,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support