StarTech.com MONPROTECT User Manual
Displayed below is the user manual for MONPROTECT by StarTech.com which is a product in the Desktop Privacy Panels category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: September 11, 2020
Product Diagram (MONPROTECT)
Rear View
Component Function
1Cable Management
Hole
• Route the Power and Video Cables for the
Display through this opening in the Transparent
VESA Panel
2VESA Mounting Holes
• Insert 4 of the appropriately sized Screws through
the Washers, the VESA Mounts, the Transparent
VESA Panel, the appropriate size and number of 5
mm and/or 20 mm Spacers, and into the Display
3Transparent VESA
Panel
• Clear acrylic sheet
• Weight - 8.3 lb. (3.76 kg)
• Three mounting heights
• Minimum mounting height (from Mounting
Surface to the middle of the VESA Mount) - 9.7 in.
(245 mm)
Requirements
For the latest requirements, please visit:
www.startech.com/MONPROTECT
• Clean, Flat, and Stable Surface for Installation
• Display with 75 x 75 mm or 100 x 100 mm Spaced VESA Mounting Holes
Transparent VESA Panel - Single Display
• Monitor Mount with a Single VESA Mounting Point
Consult the User Manual for the Monitor Mount or contact the Manufacturer of the
Monitor Mount to determine if the Monitor Mount can support the combined weight
of the Transparent VESA Panel and the Display.
• Phillips Head Screwdriver
• Two People for Installation and Adjustments
• (Optional - for cleaning) Microber Cloth
Installation
Warnings: Installing the Transparent VESA Panel is a two person task. Do not
attempt to complete the installation with one person.
The additional weight of the Transparent VESA Panel may overload the Monitor
Mount during installation and/or use. Do not exceed the weight capacity of the
Monitor Mount.
(For a Display Already Attached to a Mount) Detach the Display
• Remove the Display from the Monitor Mount.
Note: Refer to the Monitor Mount Manufacturer’s User Manual for steps on how to
remove the Display from the VESA Mount.
Attach the Transparent VESA Panel
Figure 1
Screw
Washer
VESA Mount
20 mm Spacer
5 mm Spacer
VESA Mounting Holes
Display VESA
Mounting Holes
1
2
3
Warning Statements
Make sure that you assemble this product according to the instructions.
Do not exceed the weight capacity of the Monitor Mount used in conjunction with this product.
This product is intended for indoor use only and should not be used outdoors.
This product does not lter UV light and it may amplify the sun’s rays. Exercise caution when using this product close to a
natural light source.
Do not use ammonia-based cleaners to clean this product.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of the Phillips Screw Company in the United States and other countries.
Warranty Information
This product is backed by a ten-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
To accommodate dierent Display designs, MONPROTECT comes with four sets of
Screws that are dierent lengths and diameters:
• M4 x 35mm Screws x 4
• M5 x 35mm Screws x 4
• M4 x 16mm Screws x 4
• M5 x 16mm Screws x 4
To select the Screws that t the Display, complete the following:
• Determine whether the Display’s VESA Mounting Holes are ush or inset. Inset
mounts will require Spacers.
• Power and/or Video Ports located ush on the rear of the Display will require the
use of the 20 mm Spacers.
• Determine the appropriate length of Screw required by adding the depth of the
Mounting Holes on the Display, the length of the appropriate number of Spacers,
and the thickness of the Transparent VESA Panel.
• Determine the appropriate diameter of Screw required by nding the diameter of
the Mounting Holes on the Display. This information may be labeled on the rear
of the Display. Or, it can be found in the User Manual for the Display.
Note: The four sets of Screws (included) may not be compatible with every installation
scenario. Additional Screws (sold separately) may need to be sourced for unique
installations.
1. Remove the Blue Plastic Film from the Transparent VESA Panel.
2. Remove the VESA Mount from the Monitor Mount. If the VESA Mount does not
detach from the Monitor Mount, remove the Monitor Mount from the Mounting
Surface.
Note: Refer to the Monitor Mount Manufacturer’s User Manual for steps on how to
remove the VESA Mount or Monitor Mount.
3. Position the Display, screen side down, onto a Clean, Flat, and Stable Surface.
Tip: The installation should take place close to the intended Mounting Location. This
reduces the distance the Two People must travel with the Transparent VESA Panel
Assembly.
4. Determine if the Display features 75 x 75 mm or 100 x 100 mm Spaced VESA
Mounting Holes.
5. (Optional) Place the necessary number of Spacers over the four Display VESA
Mounting Holes on the rear of the Display. (Figure 1)
Note: Ensure the correct Display VESA Mounting Holes are being utilized.
6. Determine the desired mounting height of the Transparent VESA Panel (low, middle,
high) and make note of the corresponding VESA Mounting Holes.
7. Lift the Transparent VESA Panel over the Display. Ensure the top of the Transparent
VESA Panel is facing in the same direction as the top of the Display. Lower the
Transparent VESA Panel while ensuring the selected VESA Mounting Holes align
with the (optional) Spacers or Display VESA Mounting Holes on the rear of the
Display.
8. Route the Power and Video Cables for the Display through the Cable Management
Hole and connect them to the Display.
9. Slide one Washer onto one of the appropriately sized Screws. Repeat for a total of
four Screws.
10. Insert the Screws (with Washers) through the VESA Mount, the Transparent VESA
Panel, the (optional) Spacers, and into the Display VESA Mounting Holes.
11. Use a Phillips Head Screwdriver to tighten the Screws.
Warning! Do not over-tighten the Screws. If resistance is encountered, stop tightening.
Failure to do so could result in damage to the Transparent VESA Panel or the Display.
12. Connect the Power and Video Cables for the Display to the Power Source and
Video Source.
Mount the Transparent VESA Panel Assembly
1. Reach one hand under the Transparent VESA Panel Assembly to secure a grip onto
the Display. Use the other hand grip the Transparent VESA Panel.
Tip: This step should be completed without gloves. The Transparent VESA Panel
Assembly can easily slip out of gloved hands.
2. Lift the Transparent VESA Panel Assembly over to the Mounting Location.
3. Reattach the VESA Mount to the Monitor Mount.
4. Wipe away any Fingerprints on the Transparent VESA Panel Assembly with a
Microber Cloth.
Operation
Cleaning the Transparent VESA Panel
• Wipe clean with a Microber Cloth.
Note: Do not use Ammonia Based Cleaners to clean the Transparent VESA Panel.