StarTech.com MPEXSATA22I User Manual
Displayed below is the user manual for MPEXSATA22I by StarTech.com which is a product in the Interface Cards/Adapters category. This manual has pages.
Related Manuals
Manual Revision: 03/25/2011
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
MPEXSATA22I
2-Port Mini PCI Express to Internal SATA Controller Card
*actual product may vary from photo
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual i
Table of Contents
Introduction ............................................................................................1
Packaging Contents .................................................................................................................................1
System Requirements .............................................................................................................................. 1
Installation ..............................................................................................2
Hardware Installation .............................................................................................................................. 2
Driver Installation ...................................................................................................................................... 2
Verifying Installation ................................................................................................................................ 4
Specications ..........................................................................................5
Technical Support ..................................................................................6
Warranty Information ............................................................................6
Instruction Manual 1
Introduction
The MPEXSATA22I 2-Port Mini PCIe to SATA Controller Card lets you add 2 SATA 3Gbps
connectors to a small form factor or embedded system, through a Mini PCI Express
expansion slot. Perfect for upgrading the capabilities of a system that would typically
have a very limited number of internal ports, the Mini PCIe to SATA controller card is
compatible with all types of Serial ATA devices, including hard drives (HDDs), Solid
State Drives (SSD), and optical drives (CD/DVD/BD). A versatile solution for storage
applications, this SATA controller card features built-in RAID support (JBOD, BIG, RAID
0, RAID 1), and is backed by a StarTech.com 1-year warranty and free lifetime technical
support.
Packaging Contents
• 1 x Mini PCIe adapter card
• 2 x SATA cable
• 1 x Driver CD
• 1 x Instruction Manual
System Requirements
• PCI Express enabled computer system with available mini PCIe slot
• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple® Mac OS® 10.4.9/10.4.10/10.5.1, or Linux®
Instruction Manual 2
Installation
WARNING! Mini PCI Express cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly grounded before opening
your computer case or touching your Mini PCI Express card. StarTech.com recommends
that you wear an anti-static strap when installing any computer component. If an
anti-static strap is unavailable, discharge yourself of any static electricity build-up
by touching a large grounded metal surface (such as the computer case) for several
seconds. Also be careful to handle the Mini PCI Express card by its edges and not the
gold connectors.
Hardware Installation
1. Line up and insert the Mini PCI Express adapter card with the Mini PCI Express slot
on the system board. Match up the gap in the card connector, with the notch in the
slot.
2. Securely fasten the card to the motherboard.
NOTE: Dierent systems may have dierent methods for installing mini cards, so
please refer to documentation for your system/board for full installation instructions
for your particular application.
3. Connect SATA cables from the connectors on the adapter card to the SATA
peripheral device(s).
Driver Installation
Windows 2000/XP/Server 2003 - Fresh OS Install
NOTE: These operating systems will require a 3.5” oppy disk drive to install drivers for
storage controller cards. Make sure a oppy drive is installed in the computer system
and the driver les from the Driver Installation CD are properly copied onto a oppy
disk.
1. Power up the computer system and insert the Windows Installation CD.
2. Boot from the CD and when prompted, press the [F6] key to install 3rd party drivers.
3. When prompted, insert the oppy disk with the drivers into the oppy drive and
follow the prompts.
4. Once the drivers are loaded, proceed with the Windows installation.
Windows 2000/XP/Server 2003
1. When the Found New Hardware wizard appears on the screen, insert the Driver CD
into your CD/DVD drive. If you are prompted to connect to Windows Update, please
select the “No, not this time” option and click Next.
Instruction Manual 3
2. Select the option “Install Drivers Automatically (Recommended)” and then click the
Next button.
3. Windows should now start searching for the drivers. Once this has completed, click
the Finish button.
Windows Vista/7/Server 2008 R2 - Fresh OS Install
1. Power up the computer system and insert the Windows Installation DVD.
2. Boot from the DVD and follow the installation instructions, until reaching the screen
to select the destination disk/partition.
3. Click the “Load Drivers” button and insert the Driver Installation CD and browse to
the location of the drivers on the CD.
4. Once the drivers are installed, the drive(s) connected to the controller card should
now be visible.
5. Proceed with the rest of the Windows installation.
Windows Vista/7/Server 2008 R2
1. When the Found New Hardware window appears on the screen, click on the “Locate
and install drivers software (recommended)” option. If prompted to search online,
select the “Don’t search online” option.
2. When prompted to insert the disc, insert the Driver CD that came with the card, into
your CD/DVD drive and Windows will automatically proceed to search the CD.
3. If a Windows Security dialog window appears, click the “Install this driver software
anyway” option to proceed.
4. Once the driver is installed, click the Close button.
Instruction Manual 4
Verifying Installation
Windows 2000/XP/Server 2003/Vista/7
From the main desktop, right-click on “My Computer” (“Computer” in Vista/7), then
select Manage. In the new Computer Management window, select Device Manager
from the left window panel.
Double-click on the “SCSI and RAID Controllers” option (“Storage Controllers” in
Vista/7). There should be a device listed that contains “Silicon Image SiI3132” or similar
in it’s name.
Instruction Manual 5
Specications
Host Interface PCI Express Mini Card revision 1.2
Form Factor Full Length Mini PCI Express
Supported Standards SATA revision 2.5
Chipset ID Silicon Image SiI3132CNU
Internal Connectors 2 x SATA 7-pin
Maximum Data Transfer Rate SATA: 3.0 Gbps
Supported RAID Modes 0, 1, BIG (concatenation), JBOD (single)
Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)
Storage Temperature -65°C ~ 150°C (-85°F ~ 302°F)
Dimensions 50.0mm x 30.0mm x 4.0mm
Weight 7.8g
Compatible Operating Systems
Windows 2000/XP/Server 2003/Vista/
Server 2008 R2/7 (32/64-bit),
Mac OS 10.4.9/10.4.10/10.5.1, Linux
Instruction Manual 6
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.