StarTech.com PEX4SFF8639 User Manual
Displayed below is the user manual for PEX4SFF8639 by StarTech.com which is a product in the Interface Cards/Adapters category. This manual has pages.
Related Manuals
Manual Revision: 08/05/2021
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/PEX4SFF8639.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
PEX4SFF8639
U.2 (SFF-8639) Drive to PCIe
Host Adapter
*actual product may vary from photos
Instruction manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other
countries.
Instruction manual
i
Table of Contents
Introduction ............................................................................................ 1
Product diagram ........................................................................................................................................1
Package contents ...................................................................................................................................... 3
Requirements ............................................................................................................................................. 3
Connect an SSD to the adapter card ...................................................3
Install the adapter card .........................................................................4
About the LED terminal .........................................................................4
Technical support ...................................................................................5
Warranty information ............................................................................ 5
Instruction manual
1
Introduction
Product diagram
Top views
Bracket
PCIe x4 connector
SSD mounting holes
SSD mounting holes
SFF-8639 connector
LED terminal
CLKREQ Pin Header
Instruction manual
2
Application image
(underside)
SSD
(not included)
Drive adapter card
Drive-mounting screw
Drive-mounting screw
Drive-mounting screw
Drive-mounting screw
Application image
Drive adapter card
SSD
(not included)
Instruction manual
3
Connect an SSD to the adapter card
Warning! Drives should be handled carefully, especially when you transport them. If
you’re not careful with your drives, you may experience lost or corrupted data. Make
sure that you’re properly grounded by wearing an anti-static strap when you install
any computer component. If an anti-static strap isn’t available, touch a large, grounded
metal surface for several seconds to discharge any built-up static electricity.
1. Carefully slide the SSD into the drive adapter card and connect it to the SFF-8639
connector on the card.
2. Turn the drive adapter card over.
3. Use a Phillips screwdriver and insert the four drive-mounting screws into the
mounting holes on the drive adapter card and into the SSD.
4. Tighten the screws.
Package contents
• 1 x drive adapter card
• 4 x drive-mounting screws
• 1 x quick-start guide
Requirements
• Computer or server enabled with PCI Express and an available PCIe x4, x8, or x16
slot
• Phillips screwdriver
• U.2 compatible SSD
The PEX4SFF8639 is OS independent and doesn’t require any additional drivers or
software.
Note: To determine if the drive and motherboard that you’re using are compatible,
consult the technical specications that came with the drive and motherboard.
System requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/PEX4SFF8639.
Instruction manual
4
Install the adapter card
Warning! PC components can be severely damaged by static electricity. If an anti-
static strap isn’t available, discharge any built-up static electricity by touching a large,
grounded metal surface for several seconds.
1. Turn o your computer and any devices or peripherals that are connected to it
(for example, printers, external storage, and so on).
2. Unplug the power cable from the back of your computer.
3. Disconnect any peripheral devices that are connected to your computer.
4. Open your computer case. For more information about how to do this, consult
the documentation that came with your computer system.
5. Locate an open PCIe slot and remove the corresponding metal cover plate from
the back of your computer case. Consult the documentation that came with your
computer system for detailed instructions about how to do this.
Note: This drive adapter card works in PCIe slots of x4, x8, or x16 lanes.
6. Gently insert the drive adapter card into the open PCIe slot and use a computer
case screw (not included) to fasten the bracket to the back of the case.
7. Place the cover back onto your computer case.
8. Reconnect the power cable to the back of your computer and reconnect all of
the peripheral devices that you disconnected in step 3.
9. Turn on your computer.
Note: By default E4 and CLKREQ will be connected via a jumper on the CLKREQ
pin header, however early PCI Express SFF-8639 Revision 1 drives may require the
jumper to be moved to CLKREQ and P3 in order to function.
There may be additional steps required to enable drive functionality, such as installing
drivers or updating the rmware for the drive or motherboard. For more information,
consult the documentation that came with the drive or motherboard.
About the LED terminal
You can connect an LED (not included) to the LED terminal on the drive adapter card.
The LED terminal generates an activity LED, but the exact behavior of the LED indicator
is dependent upon the SSD connected to the drive adapter card.
Instruction manual
5
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old
and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
StarTech.com Ltd.
45 Artisans
Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South
Hamilton Road
Groveport, Ohio
43125
U.S.A.
StarTech.com
Ltd.
Siriusdreef 17-27
2132 WT
Hoofddorp
The Netherlands