StarTech.com PEXSOUND7CH User Manual
Displayed below is the user manual for PEXSOUND7CH by StarTech.com which is a product in the Audio Cards category. This manual has pages.
Related Manuals
Manual Revision: 04/28/2015
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
PEXSOUND7CH
7.1 Channel PCI Express Digital Surround Sound Card - 24
Bit / 192KHz
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................ 1
Packaging Contents ................................................................................................................................. 1
System Requirements ..............................................................................................................................1
Product Diagram ....................................................................................2
Main Card ..................................................................................................................................................... 2
Header Bracket ........................................................................................................................................... 3
Internal Headers ........................................................................................................................................ 3
Installation .............................................................................................4
Hardware Installation ..............................................................................................................................4
Driver/Software Installation & Operation ......................................................................................... 5
Technical Support ..................................................................................7
Warranty Information ............................................................................ 7
Instruction Manual
1
Introduction
Packaging Contents
• 1x 7.1 Channel PCI Express Sound Card with Header Bracket & 10-pin Cable
• 2x Low-Prole Brackets
• 1x Instruction Manual
System Requirements
• PCI Express enabled computer with an available PCI Express x1 slot or higher (x4, x8,
x16)
• Optional - Additional header bracket slot on your computer case if installing and
using the Header Bracket
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Instruction Manual
2
Product Diagram
Main Card
1. Analog Left / Right Line Input
2. Analog Left / Right
Microphone Input
3. S/PDIF Input - Connect to
digital amplier or decoder
4. S/PDIF Output - Connect to
digital amplier or decoder
5. PCI Express x1 Connector -
Connect to PCI Express slot on
computer motherboard
J2. 10-Pin Header - Connects Main
Card to Header Bracket using
the provided 10-pin cable
Note: The red color coded line on
the provided 10-pin cable should
connect to pin number 1
which is represented by a
silkscreen triangle on the
card, next to the header
J4. 9-Pin Header - For connecting
to Intel HD front panel audio
J7. Analog CD-Input Header -
Signal G-R-G-L
J10. Analog CD-Input Header -
Signal L-G-G-R
Header Bracket 10-pin Cable PCI Express Main Card
J2
1
J2
J7 J10 J4
2
3
4
5
Instruction Manual
3
Header Bracket
6. Front Left / Right Analog
Output
7. Side Surround Left / Right
Analog Output
8. Center / Subwoofer Analog
Output
9. Rear Surround Left / Right
Analog Output
J2. 10-Pin Header - Connects
Header Bracket to Main Card
using the provided 10-pin cable
Note: The red color coded line on
the provided 10-pin cable should
connect to pin number 1
which is represented by a
silkscreen triangle on the card,
next to the header
6
7
8
9
J2
J2
Internal Headers
The internal header pinout is silkscreen labeled directly on the Main Cards board, next
to the header pins.
J7. Analog CD-Input Header: Signal G-R-G-L
J10. Analog CD-Input Header: Signal L-G-G-R
Pin # Description
GRight channel ground
RRight channel signal
GLeft channel ground
LLeft channel signal
Pin # Description
LLeft channel signal
GLeft channel ground
GRight channel ground
RRight channel signal
Instruction Manual
4
Installation
Hardware Installation
WARNING!
PCI Express cards, like all computer equipment, can be severely damaged by static
electricity. Be sure that you are properly grounded before opening your computer
case or touching your PCI Express card. StarTech.com recommends that you wear an
anti-static strap when installing any computer component. If an anti-static strap is
unavailable, discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds. Also be
careful to handle the PCI Express card by its edges and not the gold connectors.
1. Turn your computer o and any peripherals connected to the computer (i.e.
printers, external hard drives, etc.). Unplug the power cable from the rear of the
power supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. (See your computer system
documentation for details).
3. Locate an open PCI Express x1 slot and remove the metal cover plate on the rear of
the computer case. (See your computer system documentation for details).
Note: This card will work in PCI Express slots of additional lanes (i.e. x4, x8, or x16 slots).
4. If using the Main Card in conjunction with the Header Bracket, remove a second
metal cover plate on the rear of the computer case. (See your computer system
documentation for details).
Note: If using the Main Card in conjunction with the Header Bracket, if not already
connected, you must use the provided 10-Pin Cable to connect the Main Card and
Header Bracket together via the J2 10-Pin Headers. The red color coded line on the 10-
pin cable should connect to pin number 1 which is represented by a silkscreen triangle
next to the header on the Main Card and the Header Bracket.
5. Gently insert the Main Card into the open PCI Express slot and fasten the bracket to
the rear of the computer case. If using the Header Bracket, fasten the bracket to the
computer case in the location where you removed the second metal cover plate in
step #4.
Note: If installing the Main Card and Header Bracket into a small form-factor/low-
prole desktop system, replacing the pre-installed standard-prole brackets with the
included low-prole (half-height) installation brackets may be necessary.
6. OPTIONAL: If desired, connect Intel HD front panel audio to the Main Cards J4 9-Pin
Header (cable not included). Once connected, you can switch the audio output
through the front panel.
7. OPTIONAL: To connect an existing CD/DVD drive’s analog audio signal to the
sound card, use an appropriate audio cable (supplied with CD/DVD drive) from the
audio output on the CD/DVD drive to one of the input headers on the card. Connect
to the appropriate header depending on the make of CD/DVD drive
Instruction Manual
5
8. Place the cover back onto the computer case.
9. Insert the power cable into the socket on the power supply of the computer, and
reconnect all other connectors removed in Step 1.
10. Connect your speakers, audio sources, microphones etc, to the Main Card and Header
Bracket as desired.
Note: If using a pair of stereo speakers (2 channels), or stereo headphones, connect
using the #6. Front Left / Right Analog Output on the Header Bracket.
Header CD/DVD Drive Brand
J7 Panasonic
J10 Sony
Driver/Software Installation & Operation
Windows®
Depending on your Operating System version, the card may auto-install with native
drivers, however, follow the steps below to fully update and complete the driver /
software installation process.
1. Upon starting Windows, if the Found New Hardware dialog appears on the screen,
cancel/close the window.
2. Download the latest drivers from the www.startech.com website (recommended),
applicable to the Operating System on the host computer that you are installing the
card to.
3. Browse to the downloaded driver le location and run the “.exe” install application
applicable to the Operating System on the host computer that you are installing
the card to. Follow any on-screen instructions to complete the driver installation
process.
Note: You may be prompted to restart your system.
4. The Xear Audio Center icon should appear in your Windows task bar once
installation is complete and installation was successful.
5. To access the Xear Audio Center, click on the icon within the Windows task bar. Use
the Xear Audio Center as desired to control various functions and settings.
Instruction Manual
6
Instruction Manual
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.