StarTech.com POEINJ1GW User Manual
Displayed below is the user manual for POEINJ1GW by StarTech.com which is a product in the PoE Adapters category. This manual has pages.
Related Manuals
Quick-Start Guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/22/2016
Packaging contents
• 1 x Gigabit midspan
• 4 x screws
• 1 x universal power adapter
• 3 x power cords (EU/UK/AU)
• 1 x quick-start guide
System requirements
• RJ45-terminated UTP Cat5 or better Ethernet cable
• 10/100/1000Mbps Ethernet network equipment (for example, a
network switch)
• Available AC electrical outlet
POEINJ1GW
1-Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af
*actual product may vary from photos
Install the midspan
1. Connect an Ethernet cable from the source network device (for
example, a router) to the GbE RJ45 connector on the midspan.
2. Connect a second Ethernet cable to the GbE + PoE connector on
the midspan, and to a PoE or a PoE+ device.
3. Select the appropriate power cord for your region and connect it
to the power adapter.
4. Connect the power adapter to an AC electrical outlet and then to
the midspan. The PWR (power) LED lights up and remains solid, to
indicate the midspan is is powered.
Product diagram
Power LED
DC power input
port
RJ45 Gigabit
PoE port
(data + power)
RJ45 Gigabit
port (data only)
Mount the midspan on a surface
The POEINJ1GW comes with the necessary hardware (screws and
integrated mounting holes) to install it on a surface (for example, a
wall).
To mount the midspan, do the following:
• Using a screwdriver, secure the midspan to a surface by threading
the provided screws through the midspan’s four mounting holes
and into a surface such as a wall or a desk.
Mounting
holes
For the latest information, technical specications, and support for this product,
please visit www.startech.com/POEINJ1GW.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.