StarTech.com RDA2U User Manual
Displayed below is the user manual for RDA2U by StarTech.com which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 04/19/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/RDA2U.
Package contents
• 2 x depth-adapter brackets
• 4 x 10-32 x 5/8 screws
• 4 x 10-32 cage nuts
• 1 x instruction manual
System requirements
• Server rack
• Phillips head screwdriver
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/RDA2U.
RDA2U
Rail Depth Adapter Kit for Server Racks - 2U
*actual product may vary from photos
Introduction
The depth-adapter kit addresses the frustration of having
components that are too long or too short for your current server
rack. Instead of having to purchase new components or server racks,
you can use the RDA2U to increase or decrease the mounting depth
of your server rack rails by 4 in. (10 cm).
Product diagram
Equipment-mounting
hole
Rack-mounting
hole
Technical specications
The depth-adapter brackets use two units of your server rack and are
designed to support up to 20 lb. of weight.
Decrease the depth of your server rack
Note: When you install the brackets, make sure that the rack-
mounting holes are on the outside of the server rack.
1. Position one of the depth-adapter brackets so that the end with
the equipment-mounting holes extends into the server rack
(diagram 1).
2. Insert a 10-32 x 5/8 screw through each of the rack-mounting
holes and into the server rack.
3. Repeat steps 1 and 2 for the second bracket.
diagram 1
Note: The diagram illustrates the 1U depth-adapter bracket.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Increase the depth of your server rack
Note: When you install the brackets, make sure that the rack-
mounting holes are on the outside of the server rack.
1. Position one of the depth-adapter brackets so that the end with
the equipment-mounting holes extends outside of the server
rack (diagram 2).
2. Insert a 10-32 x 5/8 screw through each of the rack-mounting
holes and into the server rack.
3. Repeat steps 1 and 2 for the second bracket.
Note: The diagram illustrates the 1U depth-adapter bracket.
diagram 2