Warning Statements
Safety Statements
Product Diagram
Front View
Product Dimensions
Front
Side
Product Information
Package Contents
Requirements
Assembling the Server Rack
Leveling the Server Rack
Grounding the Enclosure
Installing Equipment
Adjusting the Mounting Rails

StarTech.com RK1536BKF User Manual

Displayed below is the user manual for RK1536BKF by StarTech.com which is a product in the Rack Cabinets category. This manual has pages.

Related Manuals

StarTech.com PCI1S550_LP Manual

StarTech.com ICUSB232 Manual

StarTech.com PCI2S550 Manual

StarTech.com ICUSB232PRO Manual

StarTech.com USB2VGA Manual

StarTech.com SVIDUTPEXT Manual

StarTech.com PCI2S550_LP Manual

StarTech.com ST1000BT32 Manual

Manual Revision: 12/02/2019

User Manual

For the latest information and specications visit

www.startech.com/RK1536BKF

15U Knock-Down Server Rack Cabinet with

Casters | 32 in. Deep

Actual product may vary from photos

SKU#: RK1536BKF

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Warning Statements

• Makesurethatyouassemblethisproductaccordingtotheinstructions.

• Donotexceedtheweightcapacityofthisproduct.Overloadingthis

productmightresultininjuryorpropertydamage.Thisproductcan

supportthefollowingweight:Stationary=1763.7lb.(800kg)Rolling=

330lb.(150kg).

• Thisproductisintendedforindooruseonlyandshouldnotbeused

outdoors.

• Thisenclosureisextremelyheavy.Neverattempttomoveorliftthis

enclosurewithoutassistance.

• Tippinghazard!Extendingmultiplecomponentsfromthisenclosure

increasesthechancethattheenclosurewilltipover.Toavoidthisrisk,

donotextendmorethanonecomponentfromtheenclosure.

• Donotplaceanyitemsonthisenclosureanddonotstacktheenclosure

ontopofanotherenclosure.

• Keepliquidawayfromthisenclosure.

• Makesurethatyouinstalltheenclosureinanareathatcanhandlethe

combinedweightoftheenclosureandtheequipmentthatyouintend

toplaceinsideoftheenclosure.

• Thisproductrequiresanearthgroundconnection.Donotusethis

productwithoutanearthgroundconnection.

Varningar

• Setillattdumonterarproduktenienlighetmedinstruktionerna.

• Överskridinteproduktensviktkapacitet.Överbelastningavdenna

produktkanledatillskadorellerskadorpåegendom.Dennaprodukt

kanstödjaföljandevikt:stationär:800kgrullande:150kg.

• Produktenärendastavseddföranvändninginomhusochskainte

användasutomhus.

• Dettaskåpärextremttungt.Försökaldrigyttapåskåpetellerlyftadet

utanhjälp.

• Riskförvältning!Attförlängaerakomponenterfråndettaskåpökar

riskenförattdetvälter.Förlänginteeränenkomponentfrånskåpet

förattundvikarisk.

• Placeraintesakerovanpåskåpetochställinteskåpetovanpåettannat

skåp.

• Hållvätskorbortafrånskåpet.

• Setillattduinstallerarskåpetpåenplatssomkanhanteraden

kombineradeviktenavskåpetochutrustningensomdutänkerplacera

inuti.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

• Produktenbehöverenjordadanslutning.Användinteproduktenutan

enjordadanslutning.

Avertissements

• Assemblezceproduitconformémentauxinstructions.

• Nedépassezpaslacapacitépondéraledeceproduit.Unesurcharge

deceproduitpeutentraînerdesdommagescorporelsoumatériels.Ce

produitpeutsupporterlepoidssuivant,stationnaire=800kg,roulant

=150kg.

• Ceproduitestuniquementdestinéàuneutilisationenintérieuretne

doitpasêtreutiliséàl’extérieur.

• Cerackdeserveurestextrêmementlourd.Netentezjamaisdele

déplaceroudelesouleversansaide.

• Risquedebasculement!L’extensiondeplusieurscomposantsàpartir

durackdeserveuraugmentelerisquedebasculement.Pouréviterce

risque,n’étendezpasplusd’uncomposantàpartirdurackdeserveur.

• Neplacezaucunobjetsurcerackdeserveuretn’empilezpasleracksur

unautrerack.

• N’approchezaucunliquidedurackdeserveur.

• Veillezàinstallerlerackdeserveurdansunendroitpouvantsupporter

lepoidscombinéduracketdeséquipementsquevouscomptezplacer

àl’intérieur.

• Ceproduitnécessiteunraccordementàlaterre.N’utilisezpasce

produitsansraccordementàlaterre.

Warnhinweise

• BeachtenSiebeiderMontagediesesProduktsdie

Montageanweisungen.

• ÜberschreitenSienichtdieTragfähigkeitdiesesProdukts.Das

ÜberladendiesesProduktskannzuVerletzungenoderSachschäden

führen.DiesesProduktkanndasfolgendeGewichttragen:Stationär=

800kg,rollend=150kg.

• DiesesProduktistnurzumGebrauchinInnenräumenvorgesehenund

solltenichtimFreienverwendetwerden.

• DiesesGehäuseistextremschwer.VersuchenSieniemals,dieses

GehäuseohneHilfezubewegenoderanzuheben.

• Kippgefahr!DasAusziehenmehrererKomponentenausdiesem

GehäuseerhöhtdieChance,dassdasGehäuseumkippt.Umdieszu

vermeiden,ziehenSieniemalsmehralseineKomponenteausdiesem

Gehäuseaus.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

• PlatzierenSiekeineGegenständeaufdemGehäuseundstapelnSiedas

GehäusenichtaufeinemanderenGehäuse.

• HaltenSieFlüssigkeitenvondiesemGehäusefern.

• VergewissernSiesich,dassderUntergrund,aufdemdasGehäuse

aufgestelltwird,inderLageist,dasGesamtgewichtdesGehäusesund

derGeräte,dieSiedarinplatzierenmöchten,zutragen.

• DiesesProdukterforderteinenSchutzleiteranschluss.VerwendenSie

dasProduktnichtohneeinenSchutzleiteranschluss.

Dichiarazioni di avvertenza

• AssicurarsidiAssemblareilprodottosecondoleistruzioni.

• Nonsuperarelacapacitàdicaricomassimodiquestoprodottoonde

evitaredanniolesioniallaproprietà.Questoprodottoe’ingradodi

supportareilpesoriportato,Statico=800kg,Dinamico=150kg.

• Ilprodottoèdestinatoall’usoinambientiinterni.Senesconsiglia

l’impiegoinambientiesterni.

• Ilboxesternoèmoltopesante.Nontentaredispostarloosollevarlo

senzaassistenza.

• Pericolodiribaltamento!L’estensionedipiùcomponentidalbox

esternoaumentailrischiodiribaltamentodelboxesterno.Perevitare

questorischio,nonestenderepiùdiuncomponentedalboxesterno.

• Noncollocareoggettisulboxesternoenonimpilareunboxesterno

sopraunaltro.

• Tenereilboxesternolontanodailiquidi.

• Assicurarsidiinstallarloinunpuntochepossasorreggereilpeso

combinatodelboxesternoedell’apparecchiaturachesiintende

collocarealsuointerno.

• Ilprodottorichiedeunamessaaterra.Nonutilizzareilprodottoin

assenzadiunamessaaterra.

Mensagens de aviso

• Certique-sedequemontaesteprodutodeacordocomasinstruções.

• Nãoexcedaacapacidadedepesodesteproduto.Sobrecarregareste

produtopoderesultaremferimentosoudanosàpropriedade.Este

produtopodesuportaroseguintepeso:estacionário:800kg.Rolando:

150kg.

• Esteprodutodestina-seapenasaumautilizaçãonointeriorenãodeve

serutilizadonoexterior.

• Estacaixaéextremamenteresistente.Nuncatentemoveroulevantar

estacaixasemassistência.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

• Perigodequeda!Estendervárioscomponentesdestacaixaaumentaa

probabilidadedestacaixacair.Paraevitaresterisco,nãoexpandirmais

deumcomponentedestacaixa.

• Nãocolocarnenhumartigonestacaixaenãoempilharacaixaemcima

deoutracaixa.

• Manterlíquidosafastadosdestacaixa.

• Certique-sedequeinstalaacaixanumaáreaquepodesuportaro

pesocombinadodacaixaeoequipamentoquepretendecolocar

dentrodacaixa.

• Esteprodutorequerumaligaçãoàterra.Nãoutilizeesteprodutosem

umaligaçãoàterra.

Advertencias de uso

• Asegúresedeensamblaresteproductosegúnlasinstrucciones.

• Noexcedalacapacidaddecargadeesteproducto.Elsobrecargarlo

puedeocasionarlesionesydañosenpropiedad.Esteproductopuede

soportarelsiguientepeso,Estacionario=800kgRodante=150kg.

• Elusodeesteproductoessoloparainterioresynodebeutilizarseen

exteriores.

• Lacajaesextremadamentepesada.Nuncaintentemoveroalzaresta

cajasinladebidaasistenciadeotrapersona.

• ¡Peligrodevuelco!Añadiraestacajavarioscomponentesaumentalas

posibilidadesdepeligrodevuelcodelacaja.Paraevitardichoriesgo,

noañadamásqueunsolocomponente.

• Nocoloqueningúnelementoencimadelacajaynoapilelacaja

encimadeotracaja.

• Mantengacualquierlíquidolejosdelacaja.

• Asegúresedeinstalarlacajaenunáreaquetengacapacidadpara

soportarelpesocombinadodelacajayelequipoquevaainstalar

dentrodelamisma.

• Esteproductorequiereconexiónatierra.Noutiliceesteproductosin

conexiónatierra.

Waarschuwingen

• Zorgdatuditproductvolgensdeinstructiesinelkaarzet.

• Overschrijddemaximalecapaciteitvanditproductniet.Overbelasting

Demaximalegewichtscapaciteitmagnietoverschredenworden.

Overbelastingkankanletselofschadetotgevolghebben.Ditproduct

kanhetvolgendegewichtondersteunen,stationair=800kg.rollend=

150kg.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

• Ditproductisalleenbedoeldvoorbinnengebruikenmagnietbuiten

wordengebruikt.

• Dezebehuizingisenormzwaar.Probeernooitdezebehuizingte

verplaatsenofoptetillenzonderhulp.

• Kantelgevaar!Wanneermeerderecomponentenuitdezebehuizing

steken,bestaatdekansdatdezezalkantelen.Omditrisicote

voorkomen,magnietmeerdanééncomponentuitdebehuizing

steken.

• Plaatsgeenvoorwerpenopdezebehuizingenstapeldebehuizingniet

opeenanderebehuizing.

• Houdvloeistofuitdebuurtvandezebehuizing.

• Zorgdatudebehuizinginstalleertopeenplaatsdiegeschiktisvoor

hetgecombineerdegewichtvandebehuizingendeapparatuurdieu

indebehuizingwiltplaatsen.

• Ditproductvereisteengeaardeverbinding.Gebruikditproductniet

zondereengeaardeverbinding.

注意

• 必ず取扱説明書に従って本製品の組み立てを行って下さい。

• 本製品で定められた可搬重量を超えないようにして下さい。規定された

重量を超えた場合、怪我や物的損害が発生することがあります。本製品

は次の可搬重量に対応していいます。[キャスター静止時]＝800kg、[キ

ャスター動作時]＝150kg

• 本製品は、室内での使用を想定しています。戸外では使用しないで下さ

い。

• 本製品は、非常に重いエンクロージャです。絶対に一人で持ち上げたり

動かしたりしないで下さい。

• 転倒注意！本製品から複数のコンポーネントが突き出した状態にしてお

くとエンクロージャが転倒する恐れがあります。転倒リスクを回避するた

めに、エンクロージャからはコンポーネントが突き出ないようにして下

さい。

• 本製品の上に何も載せないで下さい。複数のエンクロージャを重ねて設

置しないで下さい。

• 液体物をエンクロージャに近づけないようにして下さい。

• エンクロージャ自身と中に積載する装置の総重量に耐えられるエリアに

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

設置して下さい。

• この製品にはアースが必要です。アース接続をしていない状態で本製品

を使用しないでください。

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Cables(includingpowerandchargingcables)shouldbeplacedand

routedtoavoidcreatingelectric,trippingorsafetyhazards.

Mesures de sécurité

• Lescâbles(ycomprislescâblesd’alimentationetdechargement)

doiventêtreplacésetacheminésdefaçonàévitertoutrisque

électrique,dechuteoudesécurité

安全対策

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• Icavi(inclusiicavidialimentazioneediricarica)devonoessere

posizionatiestesiinmododaevitarepericolidiinciampo,rischidi

scosseelettricheopericoliperlasicurezza.

Säkerhetsåtgärder

• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå

såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Warning Statements ..............................................................................2

Safety Statements ..................................................................................8

Product Diagram ....................................................................................10

Front View .................................................................................................................................................... 10

Product Dimensions ..............................................................................11

Front ............................................................................................................................................................... 11

Side ................................................................................................................................................................. 12

Product Information ..............................................................................13

Package Contents .....................................................................................................................................13

Requirements ............................................................................................................................................. 14

Assembling the Server Rack ................................................................. 15

Leveling the Server Rack ....................................................................... 18

Grounding the Enclosure ......................................................................19

Installing Equipment .............................................................................19

Adjusting the Mounting Rails ..............................................................20

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Front View

1Top Panel 5Caster/Leveling Feet

2Plastic Corner Caps 6Bottom Panel

3Center Beam 7Side Panel

4Front Door 8Rear Door

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Dimensions

Front

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Side

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Package Contents

• Side Panels x 2

• Center Beams x 4

• Bottom Panels w/ Cable Management Slot x 2

• Bottom Panel x 1

• Front Door x 1

• Rear Door x 1

• Plastic Corner Caps x 8

• M8 x 20 mm Hex Screws x 8

• M8 Spring Washers x 8

• M4 x 10 mm Flat Head Screws x 8

• M6 x 12 mm Hex Screws x 4

• M5 x 12 mm Screws x 6

• M6 Hex Key x 1

• M8 Hex Key x 1

• M6 x 12 mm Phillips Screws x 24

• M6 Cage Nuts x 24

• M6 Plastic Cap Washers x 24

• Casters x 2

• Caster w/Brakes x 2

• M6 x 10 mm Phillips Bolts x 16

• Leveling Feet x 4

• Door Keys x 2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

• Side Panel Keys x 2

• Phillips Head Screwdriver x 1

• Door Hinge Pin x 2

Requirements

• Spirt/Bubble Level x 1

• 14 mm Wrench x 1

• (Optional) Cage Nut Tool x 1

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Assembling the Server Rack

1. Align the Screw Holes on the corners of the Side Panel with

the Screw Holes on the ends of the Center Beam. Ensure

that the Lip on the Center Beams lines up with the Lip on

the inner side of the Side Panel.

2. Slide an M8 Spring Washer over the M8 x 20 mm Hex

Screw.

3. Insert the M8 x 20 mm Hex Screws through the Screw Hole

on the Side Panel and into the Screw Holes on the Center

Beam.

4. Using the M8 Hex Key tighten the M8 x 20 mm Hex Screws,

being careful not to over-tighten.

5. Repeat steps 1 - 4 to install the other Side Panel and the

remaining Center Beams.

6. Turn the Server Rack upside down, resting the Server Rack

on it’s top.

7. Align the Mounting Holes on the Casters with the

Mounting Holes in the corner of the Server Rack Frame.

8. Insert an M6 x 10 mm Screw through the Mounting Hole

on the Caster and into the Mounting Hole on the Server

Rack Frame.

9. Using a Phillips Head Screwdriver, tighten the M6 x 10 mm

Screw, being careful not to over-tighten.

10. Repeat steps 1 - 4 to install the other Caster and Casters

with Brakes.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

11. Align the Leveling Feet with the Pre-Threaded Holes on

the bottom of the Server Rack Frame.

12. Using a 14 mm Wrench, tighten the Leveling Feet so that

the four Leveling Feet are all at the same height and are

shorter than the height of the Casters.

13. Align the Notch in the Plastic Corner Caps (x 4) with the

Screw Hole on each of the corners on the Server Rack.

14. Insert an M4 x 10 mm Flat Head Screw through the Screw

Holes in the Plastic Corner Cap and into the Screw Hole

on the Server Rack. Make sure that the head of the M4 x 10

mm Flat Head Screw is securing the Plastic Corner Cap in

place.

15. Using a Phillips Head Screwdriver, tighten the M4 x 10 mm

Flat Head Screws, being careful not to over-tighten.

16. Turn the Server Rack back over onto the Casters.

17. Align the Notch in the Plastic Corner Caps (x 4) with the

Screw Hole on each of the corners on the Server Rack.

18. Insert an M4 x 10 mm Flat Head Screw through the Screw

Holes in the Plastic Corner Cap and into the Screw Hole

on the Server Rack. Make sure that the head of the M4 x 10

mm Flat Head Screw is securing the Plastic Corner Cap in

place.

19. Using a Phillips Head Screwdriver, tighten the M4 x 10 mm

Flat Head Screws, being careful not to over-tighten.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

20. Align the Screw Holes on the Bottom Plate w/ Cable

Management Slot with the Screw Holes on the interior of

the Side Panel, located on the front and back on the Side

Panel.

21. Insert two M6 x 12 mm Phillips Screws through the Screw

Holes on the Bottom Plate w/ Cable Management Slot

and into the Screw Holes on the interior of the Side Panel.

22. Using a Phillips Head Screwdriver, tighten the M6 x 12 mm

Phillips Screws, being careful not to over-tighten.

23. Repeat steps 8 - 10 to install the Back and Middle Bottom

Plates.

Note: Install the Back Bottom Plate before you install the

Middle Bottom Plate.

24. On the top of the Server Rack, align the Screw Holes in the

four corners on the Top Panel with the Screw Holes in the

four corners on the top of the Server Rack Frame.

Note: The Top Panel should t tightly against the corner

piece of the Top of the Server Rack.

25. Insert an M6 x 12 mm Hex Screw through the Screw Hole

on the Top Panel and into the Screw Hole on the Server

Rack Frame.

26. Using the M6 Hex Key, tighten the M6 x 12 mm Hex Screw,

Being careful not to over-tighten.

27. Repeat steps 13 - 14 for the remaining corners.

28. Insert a Door Hinge Pin into the Hinge Pin Hole in the

bottom corner of the Side Panel.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

29. Angle the bottom corner of the Front Door towards the

Door Hinge Pin.

30. Insert the Door Hinge Pin into the bottom Hinge Pin Hole

on the Front Door.

31. In the top corner on the Front Door, pull the Spring-

Loaded Hinge Pin down.

32. While holding down the Spring-Loaded Hinge Pin, angle

the top corner of the Front Door towards the top corner of

the Server Rack, aligning the Spring-Loaded Hinge Pin

with the Hinge Pin Hole.

33. Release the Spring-Loaded Hinge Pin into the Hinge Pin

Hole.

34. Repeat steps 16 - 18 to install the Rear Door.

Leveling the Server Rack

The Server Rack will need to be properly level prior to installing

any rack equipment, to ensure stability. The surface the Server

Rack is located on must also be a at, level surface in order

to support the combined weight of the Server Rack and rack

equipment installed.

1. Determine the location of the Server Rack. Use a Spirt/

Bubble Level to ensure that the location’s surface is a at,

level surface.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

2. Using an 14 mm Open-Ended Wrench, lower the Leveling

Feet (4 located next to each Casters) by turning it clockwise

until the base of the Leveling Feet are tightly pressed

against the surface, supporting the weight of the Server

Rack.

Grounding the Enclosure

Note: This product must be grounded. Do not use this prod-

uct without an earth ground connection.

1. Use an M6 Screw to attach a grounding wire to the

grounding point on the Server Rack, located on the inside

of the bottom of the Front and Back Doors and inside the

Side Panels.

2. Route the wire under the frame of the enclosure and

connect the wire to your facility’s earth ground connection.

Installing Equipment

Note: When you load equipment into this product, load

the heaviest equipment in the bottom rails rst. Continue

loading equipment in a descending order of weight, so that

the lighter equipment is installed in the upper sections of the

enclosure and the heavier items are on the bottom.

This Server Rack comes with M6 Cage Nuts and Screws but

the equipment you’re installing may come with mounting

hardware. Consult the documentation that came with the

equipment to determine the best mounting hardware that you

should use and how you should install it.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

1. Decide where in the Server Rack you want to install the

equipment and insert the M6 Cage Nuts in the Mounting

Rails.

2. Line up the Mounting Holes on the equipment with the M6

Cage Nuts.

3. Insert the Screws through the Mounting Holes on the

equipment and into the M6 Cage Nuts.

4. Using a Phillips Head Screwdriver tighten the Screws,

being careful not to over-tighten.

Adjusting the Mounting Rails

1. Each Mounting Rail has four M6 Screws securing the

Mounting Rail to two Depth Adjustment Rails. Two M6

Screws are located at the top and two M6 Screws are

located at the bottom of a Mounting Rail.

2. Using a Phillips Head Screwdriver, remove the four M6

Screws and

3. Remove the Cage Nuts from the Depth Adjustment Rails,

by pinching the two Prongs on the back of the Cage Nut

inwards.

Note: Use a Cage Nut Tool (sold separately), If you are

having trouble removing the Cage Nuts from the Depth

Adjustment Rails.

4. Slide the Mounting Rail along the Depth Adjustment Rails

until you have reached the desired mounting depth.

Notes: The distance between each of the Mounting Rail

Adjustment Hole is 7/8 inch.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

5. Insert the Cage Nuts into the Square Mounting Holes on

the Depth Adjustment Rails. Insert one side of the Cage

Nut into the Square Mounting Hole and push the other

side into the Square Mounting Hole, until it locks into place.

Note: Use a Cage Nut Tool if you are having issues installing

the Cages Nuts into the Depth Adjustment Rails.

6. Insert the M6 Screws through the Mounting Rail and into

the Depth Adjustment Rails.

7. Using a Phillips Head Screwdriver to tighten the M6

Screws. Be careful not to over-tighten the M6 Screws.

Warranty Information

This product is backed by a lifetime warranty.

For further information on product warranty terms and conditions, please refer

to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or

their ocers, directors, employees or agents) for any damages (whether direct

or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use

of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or

consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.

It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need.

From the latest technology to legacy products — and all the parts that bridge

the old and new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they

need to go. Just talk to one of our tech advisors or visit our website. You’ll be

connected to the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products

and to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and

technology parts. StarTech.com was founded in 1985 and has operations in the

United States, Canada, the United Kingdom and Taiwan servicing a worldwide

market.

Reviews

Share your experiences using StarTech.com products, including product

applications and setup, what you love about the products, and areas for

improvement.

StarTech.com Ltd.

45 Artisans Cres.

London, Ontario

N5V 5E9

Canada

StarTech.com LLP

2500 Creekside Pkwy.

Lockbourne, Ohio

43137

U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle

15 Gowerton Rd.,

Brackmills

Northampton

NN4 7BW

United Kingdom

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support