StarTech.com S2510BU33PW User Manual
Displayed below is the user manual for S2510BU33PW by StarTech.com which is a product in the Storage Drive Enclosures category. This manual has pages.
Related Manuals
Manual Revision: 01/13/2016
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
S2510BU33PW
USB 3.0 to 2.5” SATA III Enclosure w/Encryption
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ............................................................................................ 1
Packaging Contents ................................................................................................................................. 1
System Requirements ..............................................................................................................................1
Product Diagram ....................................................................................2
Top View ....................................................................................................................................................... 2
Front View .................................................................................................................................................... 2
Hardware Installation ............................................................................3
How to Use ..............................................................................................5
Initial Setup ................................................................................................................................................. 5
Menu Options ............................................................................................................................................. 7
Technical Support ..................................................................................10
Warranty Information ............................................................................ 10
Instruction Manual
1
Introduction
Packaging Contents
• 1 x USB 3.0 to 2.5” SATA III Enclosure w/ Encryption
• 1 x USB 3.0 Cable
• 1 x Drive case
• 1 x Drive installation screws
• 1 x Mini screw driver
• 1 x Instruction manual
Note: It is recommended that the contents of this enclosure be regularly backed-up,
as lost passwords or hardware failure (SATA drive or enclosure) will result in the stored
data being unrecoverable.
System Requirements
• Computer system with available USB port
• 2.5in SATA Hard drive (HDD) or Solid State Drive (SSD)
Warning: To use AES encryption, the SATA drive must be initialized and formatted after
setup. This will erase all data on the drive.
Instruction Manual
2
Product Diagram
Top View
1. OLED Readout Display
2. Touchscreen Keypad
Front View
1. USB 3.0 Micro B port
2
1
1
Instruction Manual
3
Hardware Installation
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
1. The back panel of the enclosure is held securely in place with two small screws. Use
the provided mini screwdriver to remove the screws.
NOTE: For brand new out of the box installations, this step is not required as the
screws are not installed.
2. Using the small groove located along the top edge of the enclosure, remove the
back panel to expose the interior drive bay.
Instruction Manual
4
3. Place the 2.5” SATA drive into the bay (label side down) and slide the drive onto the
SATA connector. Make sure the drive is fully seated.
CAUTION: To use AES encryption, the drive must be initialized and formatted after
setup. Do not place a drive containing data you wish to encrypt into the enclosure. The
data must be copied over after the enclosure has been setup.
4. Place the back panel back onto the enclosure and fasten using the small screws.
5. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to
a USB port on the host computer system.
Instruction Manual
5
How to Use
Initial Setup
1. When connected to a host computer for the rst time, the OLED readout will
prompt you to setup a password or not. If no password is used, the enclosure will
function as a standard external hard drive enclosure without any encryption.
2. If you have chosen to use a password you will receive a prompt informing you it will
be impossible to recover data without your password. Select “Yes” to continue.
3. After you have selected the option to continue to use a password, you will be
prompted to enter a 4 ~ 8 digit password. Press <Enter> when complete.
WARNGING: If the password is lost, the data on the drive will not be recoverable.
4. Re-enter the password as conrmation and press <Enter>.
The new HDD is connected. Will
you use Passwords? Yes/No
It is impossible to recovery any
data in the HDD after initialization.
Do you want to continue? Yes/No
Enter a password rst time
****
Re-enter your password
****
Instruction Manual
6
5. Once the password has been setup, the SATA drive must be initialized and formatted
before use. From the main Windows desktop, right-click on “My Computer”
(“Computer” in Vista/ 7 / 8), then select Manage. In the new Computer Management
window, select Disk Management from the left window panel.
6. A dialog window should automatically appear, asking your to initialize the drive.
Depending on the version of Windows, it will give you the option of either creating an
“MBR” or “GPT” disk. GPT (GUID partition) is not compatible with some older operating
systems, while MBR is supported by newer and older operating systems.
7. Once initialized, locate the Disk that says it is “Unallocated” (check the listed hard drive
capacity to conrm it’s the correct hard drive) and then right-click in the section that
says “Unallocated” and select “New Partition”.
Note: Losing the password or hardware failure (the SATA drive or enclosure) will result
in the data stored in the enclosure becoming unrecoverable. Removing the drive from
the enclosure or placing it into another S2510BU3PW enclosure will not allow access to
the data. It is recommended that all data stored on the enclosure also be backed up to
another location regularly to prevent any chance of losing your data.
Instruction Manual
7
Menu Options
Pressing the <Menu> button on the keypad will allow access to additional options for
the enclosure. Press the <UP> and <DOWN> arrow keys (<2>, <8>) to scroll through
the available options.
HDD Temp
Displays the current temperature of the installed SATA drive.
Note: Only compatible with select hard drives
USB Connection Speed
Displays the current USB connection mode (i.e. USB 3.0/ USB 2.0/ USB 1.0).
HDD Temp
USB Connection Speed
Write Protection
User Info
Initialization of HDD Usage Mode
HDD Temperature
Temp: 33ºC
USB Connection Speed
USB 3.0
Write Protection
Enable write protection on the installed SATA drive, which prevents data from being
written to or deleted from the SATA drive. Data can only be read.
User Info
Conguration options for setting and displaying optional user info, such as a name (8
character limit) and phone number (20 character limit). A name can be congured to
display on the OLED display on startup, instead of the standard logo and the phone
number can be set to display when an incorrect password is entered. This can be used
as contact info for returning misplaced units. Check the “User Info Display” option to
enable this feature.
Instruction Manual
8
When entering characters for the “Name”, refer to the following chart. Enter the
code for the desired character and then press <Enter>. When nished entering all
characters, press the <Menu> button to save and exit
1. Name ( )
2. Phone Number ( )
3. User Info display
0sp 14 .28 <42 J56 X70 f 84 t
1!15 /29 =43 K57 Y71 g 85 u
2“16 030 >44 L58 Z72 h 86 v
3#17 131 ?45 M59 [73 i 87 w
4$18 232 @46 N60 \74 j 88 x
5%19 333 A47 O61 ]75 k 89 y
6&20 434 B48 P62 ^76 l 90 z
7‘21 535 C49 Q63 _77 m 91 {
8(22 636 D50 R64 `78 n 92 |
9)23 737 E51 S65 a79 o 93 }
10 *24 838 F52 T66 b80 p 94 ~
11 +25 939 G53 U67 c81 q 95 [ ]
12 ,26 :40 H54 V68 d82 r
13 -27 ;41 I55 W69 e83 s
NOTE: There is no backspace, so if a wrong character is entered, you must exit and
re-enter the menu to start over.
Initialization of HDD Usage Mode
WARNING: This will result in all data on the drive being lost.
The installed SATA drive can be re-initialized while connected to the host computer,
which will result in the drive partition being deleted and drive being treated as a
new drive. The SATA drive will need to be re-partitioned and formatted on the host
computer afterwards.
Instruction Manual
9
Do you want to initialize HDD?
0=NO, 1=YES
HDD Lock
Instead of disconnection the hard drive during extended period no use or while
leaving the drive unattended the drive can be Locked and disconnected from the
host by pressing and holding the <Menu> button for about 5 seconds. To Unlock the
drive, press and hold the <Menu> button again for about 5 seconds. The user will be
prompted for the password before the drive will become accessible again.
WARNING: Make sure no data is being written or read from the drive when using this
function. Doing so may result in damage and/or loss of data.
Instruction Manual
10
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.