StarTech.com SSPMSUDWM User Manual
Displayed below is the user manual for SSPMSUDWM by StarTech.com which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 18, 2019 12:19 PM
Product Diagram (SSPMSUDWM)
Component Function
1Docking Station
Mount
• Used to mount a StarTech.com Docking
Station or Hub to a desk or wall.
2Mounting Holes • Used to mount the Docking Station Mount to
a desk or wall.
3Docking Station
Mounting Holes
• Used to mount a StarTech.com Docking
Station or Hub to the Docking Station
Mount.
Requirements
For the latest requirements, please visit www.startech.com/SSPMSUDWM
• Robertson Head Screwdriver x 1
Package Contents
• Docking Station Mount x 1
• M3 x 5 mm Screws x 4
• #5-20 x 5/8” Wood Screws x 4
• Quick-Start Guide x 1
Mount for StarTech.com Docking Stations and Hubs
Attaching a StarTech.com Docking Station or Hub
1. Align the Mounting Holes on the Adapter with the Mounting Holes on the
StarTech.com Docking Station or Hub. The recessed hole pattern should be facing
outward so the M3 x 5 mm (Countersunk) Screws will t properly.
2. Insert the four M3 x 5 mm Screws through the Mounting Holes on the Adapter
and into the Mounting Holes on the Startech.com Docking Station or Hub.
3. Using a Phillips Head Screwdriver (sold separately) tighten the M3 x 5 mm Screws,
being careful not to over-tighten the M3 x 5 mm Screws.
Mounting the Docking Station Mount on a Desk
Note: Make sure that the thickness of the Desk is greater than 12.5 mm (.5”) to ensure
that the screws do not penetrate the opposite side of the desk.
1. Align the Docking Station Mount on the desk.
2. Insert the #5-20 x 5/8” Wood Screws in the Mounting Holes on the Docking
Station Mount.
3. Using a Robertson Head Screwdriver (sold separately), tighten the #5-20 x 5/8”
Wood Screws.
Mounting the Docking Station Mount on a Wall
Notes: It is recommended to use wall studs when mounting the Docking Station
Mount onto a Wall.
You may need to drill pilot holes when mounting the Docking Station Mount into a
wall stud.
1. Align the Docking Station Mount on the Wall.
2. Insert the #5-20 x 5/8” Wood Screws in the Mounting Holes on the Docking
Station Mount.
3. Using a Robertson Head Screwdriver, tighten the #5-20 x 5/8” Wood Screws.
2
1
3
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Product Dimensions