StarTech.com ST4200USBM User Manual
Displayed below is the user manual for ST4200USBM by StarTech.com which is a product in the Interface Hubs category. This manual has pages.
Related Manuals
Manual Revision: 11/25/2011
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
ST4200USBM
Mountable 4 Port Rugged Industrial USB Hub
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Introduction ...........................................................................................1
Features ........................................................................................................................................................ 1
Package Contents ..................................................................................................................................... 1
Connector Layout ...................................................................................2
Hardware Installation ............................................................................3
Checking the Hub Installation .............................................................4
Specications ..........................................................................................4
Technical Support ..................................................................................5
Warranty Information ............................................................................5
Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com ST4200USBM High-Speed 4-Port USB2.0 hub.
This ruggedly built hub is ideal for industrial environments and can be wall-mounted
or installed onto a DIN rail for convenient access to the ports. This four port industrial
hub can be bus-powered or self powered, with a three wire terminal block connector
(7-24V).
Features
• Choice of Bus Power and/or External Terminal Block Power
• Compact space saving and mountable design (mount on a wall or DIN rail)
• Max data transfer rate of up to 480 Mbps and backwards compatible with USB 1.1
• Includes a 2 meter USB cable for quick and easy installations
Package Contents
• USB 2.0 Hub
• User’s Manual
• 2m USB A-B cable
• DIN Rail Mounting Kit
Instruction Manual
2
Connector Layout
Activity LEDs for Downstream Ports: These 4 LED indicators will blink whenever the
USB ports are transferring data.
Upstream Port Connector: Type-B USB connector for upstream USB connection.
Self-Power Input Connectors: 3-Pin terminal block connectors used to connect the
hub to an available power source. The voltage can be in the range of +7V to 24VDC.
WARNING: Ensure that the polarity of the input power is correctly matched to that of
the terminal block pins. Otherwise, it may damage the hub.
Power LED
Upstream Port
Connector
Downstream Port Connectors
Self Power Input Connectors
Activity LEDs for Downstream
Ports
Instruction Manual
3
Hardware Installation
1. Use static electricity discharge precautions
Eliminate the potential for static discharge from any objects that the hub may come
in contact with before the installation. This can be accomplished by touching a bare
metal chassis rail after you have turned o the power.
2. Apply DC power to the 3-pin Terminal Block Connector
The terminal block connector adds power to ensure there is enough to run the 4
downstream USB ports.
3. Connect the USB host cable
The host cable is a standard A-to-B USB2.0 cable. Connect the type-A connector to
the upstream USB port being used, then connect the type-B connector to the USB
hub. Since the hub is plug and play, it can be connected while the host computer is
powered on.
4. Connect the USB devices to the downstream ports of the hub.
5. Mount the hub on the wall or DIN RAIL if required.
Instruction Manual
4
Checking the Hub Installation
To check the USB hub installation in Windows Device Manager, follow these steps:
1. Click Start
2. Click Control Panel
3. Click System
4. Click Device Manager
5. Double click Universal Serial Bus Controller
6. Double click Generic USB HUB
7. The message should show that the device is working properly
Specications
Operating Temperature 0° to 55°C (32 to 131°F)
Operating Humidity 5 to 95% RH
Dimensions (LxWxH) 4.50”(L) x 2.26”(W) x 1.03”(H)
(11.45 x 5.73 x 2.63cm)
Storage Temperature -20° C to 85°C (-4°F to 185°F)
OS Compatibility OS independent; No software or drivers
required
Instruction Manual
5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.