StarTech.com STNDMTV100 User Manual
Displayed below is the user manual for STNDMTV100 by StarTech.com which is a product in the TV Mounts category. This manual has pages.
Related Manuals
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
Mesures de sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
Misure di sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Assemble this product according to the instructions.
• Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage.
• Weight capacity of the multimedia shelf: 5 kg (11 lb.)
• Weight capacity of the camera shelf: 5 kg (11 lb.)
• Weight capacity of the TV mount: 100 kg (220 lb.)
• Do not allow children to climb on this product, or use this product without
proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Assembling this product is a two-person task. Do not attempt to assemble
this product and install equipment without assistance.
• Before adding equipment to this product, ensure the product has been
properly assembled and installed, and that the product can support the
weight of the added equipment.
• Make sure all of the equipment has been properly installed before adjusting
this product.
• Do not move the cart over cords, cables, or uneven surfaces.
• Before moving the cart, unlock the casters.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
• Viktkapacitet multimedia hylla: 5 kg
• Viktkapacitet kamera hylla: 5 kg
• Viktkapacitet fäste för TV: 100 kg
• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt.
iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Det krävs två personer för att montera produkten. Försök inte montera
produkten och installera utrustning utan hjälp.
• Innan du lägger till utrustning på produkten, se till att produkten är korrekt
monterad, installerad och att produkten klarar av vikten på utrustningen som
du lägger till.
• Se till att all utrustning är korrekt installerad innan du börjar justera
produkten.
• Flytta inte vagnen över kablar eller ojämna ytor.
• Innan du börjar ytta på vagnen, se till att hjulen är upplåsta.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken.
• Gewichtscapaciteit van het multimedia oppervlak: 5 kg
• Gewichtscapaciteit van het bovenste oppervlak (voor camera): 5 kg
• Gewichtscapaciteit van de schermbevestiging (voor televisie): 100 kg
• Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten worden
gebruikt.
• Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als u
weerstand voelt tijdens het vastdraaien van de schroeven, stop dan.
• Dit product moet met twee personen in elkaar worden gezet. Probeer dit
product niet zonder hulp in elkaar te zetten en apparatuur te installeren.
• Voordat u apparatuur aan dit product toevoegt, moet u ervoor zorgen dat
u het op de juiste manier in elkaar hebt gezet en geïnstalleerd, en dat het
product het gewicht van de toe te voegen apparatuur kan ondersteunen.
• Zorg dat u de apparatuur goed installeert voordat u met het aanpassen van
dit product begint.
• Rijd de wagen niet over snoeren, kabels of ongelijke oppervlakken.
• Voordat u de wagen gaat verplaatsen, moet u de zwenkwielen ontgrendelen.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解して
から組み立て作業を始めて下さい。
v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載
重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
• マルチメディア棚の総耐荷重:5kg
• カメラ棚の総耐荷重:5kg
• TVマウンタの総耐荷重:100kg
• 本製品に小さなお子様が乗って遊ばないようにして下さい。お子様が使用
する際には、適切な監視を怠らないようにして下さい。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
• 本製品を組み立てる際、ネジを締めすぎないようにして下さい。ネジを締め
ているうちに手応えを感じたら、締めるのを止めてください。
• 本製品は、二人がかりでの組み立てを想定しています。手助けなしに単独で
組み立てと設置を行わないで下さい。
• 本製品に装置を積載する前に、組み立てと設置が適切に行われたか確認し
て下さい。また、積載する装置の重量に本製品が対応しているか確認して
下さい。
• 転倒注意！モニタが一番高い位置にある状態でカートを動かさないで下さ
い。また、モニタを押してカートを動かすのはやめて下さい。
• コードやケーブルの上、または凹凸のある床面でカートを移動させないで
下さい。
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni.
• Portata massima del ripiano multimediale: 5 kg
• Portata massima del ripiano per camera: 5 kg
• Portata massima del support per TV: 100 kg
• Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un’adeguata supervisione.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• Durante l’assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l’operazione.
• L’assemblaggio di questo prodotto richiede la presenza di due persone.
Non tentare di assemblare il prodotto e installare le apparecchiature senza
assistenza.
vi
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Prima di aggiungere altre apparecchiature al prodotto, assicurarsi di averlo
assemblato e installato correttamente e che sia in grado di sostenere il peso
dell’apparecchiatura in questione.
• Assicurarsi di aver installato correttamente tutte le apparecchiature prima di
procedere alla regolazione del prodotto.
• Non far passare il carrello sopra corde, cavi o superci irregolari.
• Prima di procedere allo spostamento del carrello, vericare di aver sbloccato
le rotelle.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels.
• Capacité de poids de l’étagère multimédia : 5 kg
• Capacité de poids de l’étagère pour caméra : 5 kg
• Capacité de poids du support d’écran : 100 kg
• N’autorisez pas les enfants à grimper sur ce produit ni à l’utiliser sans
surveillance.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Ne serrez pas trop les vis lors de l’assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer.
• L’assemblage de ce produit nécessite deux personnes. Ne tentez pas
d’assembler le produit et d’installer les équipements sans aide.
• Avant d’ajouter des équipements au produit, vériez que vous l’avez
correctement assemblé et installé, et que le produit peut supporter le poids
des équipements que vous y ajoutez.
• Veillez à installer correctement tous les équipements avant de commencer à
ajuster le produit.
• Ne faites pas rouler le meuble sur des cordons, des câbles ou des surfaces
inégales.
• Avant de déplacer le meuble, veillez à débloquer les roulettes.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Leia todo o manual e certique-se de que entende as instruções antes de
começar a montar e a utilizar este produto.
vii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade.
• Capacidade de carga de la bandeja multimídia: 5 kg
• Capacidade de carga de la bandeja de câmera: 5 kg
• Capacidade de carga de suporte para TV: 100 kg
• Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar.
• Montar este produto é uma tarefa para duas pessoas. Não tentar montar este
produto e instalar o equipamento sem assistência.
• Antes de adicionar o equipamento a este produto, certique-se de que o
montou e instalou devidamente e de que o produto pode suportar o peso do
equipamento que está a adicionar ao mesmo.
• Certique-se de que instala devidamente todo o seu equipamento antes de
começar a ajustar este produto.
• Não mova o carro pelos os, cabos ou superfícies irregulares.
• Antes de começar a mover o carro, certique-se de que desbloqueia os
rodízios.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad.
• Capacidad de carga del estante multimedia: 5 kg
• Capacidad de carga del estante de la cámara: 5 kg
• Capacidad de carga del soporte de TV: 100 kg
• No permita que los niños se suban a este producto o que lo utilicen sin la
debida supervisión de un adulto.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si
al apretar los tornillos siente resistencia, no los apriete más.
• Se requieren dos personas para el ensamblaje de este producto. No intente
ensamblar este producto e instalar otros equipos sin la debida asistencia de
otra persona.
viii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Antes de instalar equipos en este producto, asegúrese de haberlo
ensamblado correctamente, a n de que pueda soportar el peso del equipo
que vaya a instalar.
• Asegúrese de que ha instalado todo el equipo correctamente antes de
efectuar ajustes de este producto.
• No desplace el carrito encima de cables o supercies desniveladas.
• Antes de empezar a mover el carrito, asegúrese de haber desbloqueado
las ruedas. Antes de empezar a mover el carrito, asegúrese de haber
desbloqueado las ruedas.
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden
haben.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
• Gewichtskapazität des Multimedia Fachbodens: 5 kg
• Gewichtskapazität des Kamera Fachbodens: 5 kg
• Gewichtskapazität der TV Halterung: 100 kg
• Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt
ohne Aufsicht zu benutzen.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu
fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand
stoßen, stellen Sie das Anziehen ein.
• Die Montage dieses Produkts ist auf die Ausführung von zwei Personen
ausgelegt. Versuchen Sie nicht ohne Hilfe, dieses Produkt zu montieren und
Geräte zu installieren.
• Bevor Sie Geräte zu diesem Produkt hinzufügen, vergewissern Sie sich, dass
Sie es ordnungsgemäß montiert und installiert haben und dass das Produkt
das Gewicht der Geräte, die Sie hinzufügen möchten, tragen kann.
• Sorgen Sie dafür, dass all Ihre Geräte ordentlich installiert sind, bevor Sie
dieses Produkt justieren.
• Bewegen Sie den Wagen nicht über Leitungen, Kabel oder unebenes
Gelände.
• Stellen Sie sicher, dass die Rollen entriegelt sind, bevor Sie den Wagen in
Bewegung setzen.
Table of Contents
Compliance Statements ........................................................................i
Safety Statements ..................................................................................ii
Warning Statements ..............................................................................iii
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Back View .....................................................................................................................................................2
Product Dimensions ..............................................................................3
Front View .................................................................................................................................................... 3
Product Information ..............................................................................4
Package Contents .....................................................................................................................................4
Requirements .........................................................................................6
Technical Specications .......................................................................................................................... 7
Installation ..............................................................................................9
Attach the Casters .....................................................................................................................................9
Attach the Columns to the Base .......................................................................................................... 10
Attach the Universal Plate ......................................................................................................................13
Assemble the Media Shelf......................................................................................................................14
Attach the Media Shelf to the Columns ............................................................................................15
Attach the TV Mounting Brackets ....................................................................................................... 17
Hang the TV onto the Universal Plate ................................................................................................18
Assemble the Camera Shelf ...................................................................................................................19
Attach the Camera Shelf Assembly ....................................................................................................20
Cable Management ..................................................................................................................................21
Operation ................................................................................................22
Adjust the Tilt Angle of the TV Mounting Brackets ....................................................................... 22
Move the Mobile TV Stand Assembly ................................................................................................ 22
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
Camera Shelf
Left TV Mounting
Bracket
Connecting Plate
Casters
Right TV
Mounting Bracket
Universal
Plate
Left Column Right Column
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Back View
Media Shelf
Support Bar
Base
Casters
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Front View
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Base
Qty: 1
Casters
Qty: 4
Universal Plate
Qty: 1
Handles
Qty: 2
Left Column
Qty: 1
Right Column
Qty: 1
Left TV Mounting
Bracket
Qty: 1
Right TV
Mounting
Bracket
Qty: 1
Top Covers
Qty: 2
Media Shelf
Qty: 1
Connecting Plate
Qty: 1
Camera Shelf
Qty: 1
5
Support Bar
Qty: 1
Knobs
Qty: 2
M6 x 25 mm
Screws
Qty: 4
M4 x 6 mm
Screws
Qty: 3
M4 x 6 mm
Round Head
Screws
Qty: 2
M6 x 25 mm Hex
Head Screws
Qty: 2
M6 x 14 mm
Screws
Qty: 6
M8 x 25 mm Hex
Head Screws
Qty: 8
M6 x 25 mm
Button Head
Screws
Qty: 2
Hex Key
Qty: 1
Wrench
Qty: 1
M5 x 14 mm
Round Head
Screws
Qty: 4
6
M6 x 14 mm
Round Head
Screws
Qty: 4
M6 x 30 mm
Round Head
Screws
Qty: 4
M8 x 30 mm
Round Head
Screws
Qty: 4
M8 x 50 mm
Round Head
Screws
Qty: 4
Square Washers
Qty: 4
Small Spacers
Qty: 8
Large Spacers
Qty: 8
User Manual
Qty: 1
Requirements
For the latest requirements, please visit
www.startech.com/STNDMTV100
• TV x 1
• (Optional) Web Camera x 1
• (Optional) Media Device (e.g. DVD Player) x 1
• (Optional) Padlock
• Phillips Head Screwdriver x 1
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
Type of Measurement Measurement
Screen Size
60” - 100”
Weight Capacity TV -- Up to 220 lb. (100 kg)
Media Shelf -- Up to 11 lb.
(5 kg)
Camera Shelf -- Up to 11 lb.
(5 kg)
VESA Compatible 400 x 400
600 x 400
800 x 400
800 x 600
900 x 600
1000 x 600
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Tilt Range
+5° ~ -10°
Height Adjustment
47.2 - 65” (1220-1650 mm)
Cable Management
Yes
9
Installation
Attach the Casters
1. Flip the Base upside down and place it onto a clean and at
surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert each of the four Casters into the holes, located in the
bottom of the Base and tighten, using the Wrench.
3. Flip the Base upright so that the Casters are making contact
with the surface.
4. (For uneven surfaces) Flip the Base upside down and use the
Wrench to adjust the Nut located on each Caster.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 1
Casters
Wrench
Nut
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Columns to the Base
1. Determine the desired mounting height for the TV.
2. Hold the inner and outer Left Column in one hand and
loosen the two Hex Screws on the side of the Left Column,
using the Hex Key. (Figure 2)
Notes: Two People may be required to complete this step.
Do not release the grip on the inner and outer
portions of the Left Column while the Hex Screws
are loose.
3. Extend the Left Column to the desired mounting height.
Use the built-in Height Indictor, located on the inner
portion of the Left Column.
4. Tighten the two Hex Screws, using the Hex Key.
5. Repeat steps 2-4 for the Right Column. Ensure both
Columns are the same height by referencing the Height
Indicators on the inner portion of each Column.
Figure 2
Outer Left
Column
Inner Left
Column
Hex Key
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Engage the Brake on each one of the four Casters before
proceeding to step 7. (Figure 3)
7. Slide the Left and Right Columns into their respective
locations in the Base.
Note: The Cable Management Holes in the Columns must
be facing the front of the assembly.
8. Slide one Plastic Handle over the Left Column. Ensure the
grip loop portion of the Plastic Handle is facing the back of
the Base.
Note: The Left Column has not yet been attached to the
Base with a Screw. Exercise caution when sliding the Plastic
Handles over the Columns.
9. Repeat step 8 for the Right Column.
11
Figure 3 Base
Plastic Handle
Columns
12
10. Tilt the entire Assembly onto its side to gain access to the
bottom of the Base. (Figure 4)
Note: It is recommended that Two People complete this step
and any subsequent steps that involve tilting or moving the
Mobile TV Cart.
11. Insert four M8 x 25 mm Hex Head Screws through the Base
and into the Left Column.
12. Tighten all four M8 x 25 mm Hex Head Screws, using the
Hex Key.
13. Repeat steps 11-12 for the Right Column.
14. Tilt the entire Assembly back to an upright position.
15. Insert one M6 x 25 mm Screw into the back of the Left
Column. (Figure 5)
Warning! Do not skip this step. The M6 x 25 mm Screws
serve as important safety stops.
16. Tighten the M6 x 25 mm Screw, using a Phillips Head
Screwdriver.
17. Repeat steps 15-16 for the Right Column.
Figure 4
Base
Hex Key
M8 x 25 mm
Hex Head
Screws
13
Attach the Universal Plate
1. Place the Universal Plate atop the Left and Right Columns
and align the four screw holes in the Universal Plate with
the two screw holes in each Column. (Figure 6)
2. Insert four M6 x 14 mm Screws through the Universal Plate
and into the Columns (two for each Column).
3. Tighten all four M6 x 14 mm Screws, using a Phillips Head
Screwdriver.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
M6 x 25 mm
Screw
Figure 6
Universal
Plate
M6 x
14 mm
Screw
14
4. Ax one Top Cover over each Column. (Figure 7)
Assemble the Media Shelf
1. Flip the Media Shelf upside down and place on a clean and
at surface.
2. Place the Support Bar up against the Media Shelf, aligning
the holes in the Support Bar with the holes found in the
Media Shelf. (Figure 8)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 7
Top Cover
Column
Figure 8
Media Shelf
Knob
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Hold one of the Knobs up against the outermost hole in
the Support Bar and insert one of the M6 x 25 mm Button
Head Screws through the square shaped hole in the Media
Tray, the Support Bar, and into the Knob.
4. Tighten the Knob.
5. Repeat steps 3-4 to attach the second Knob.
6. Insert two M6 x 14 mm Screws through the innermost
circular shaped holes in the Media Tray and into the
Support Bar.
7. Tighten the M6 x 14 mm Screws, using a Phillips Head
Screwdriver.
Attach the Media Shelf to the Columns
Figure 9
Media
Shelf
Hex Key
Support Block
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1. Hold the Media Shelf Assembly up against/behind the
Support Blocks, located on the insides of the Columns.
Align the holes in the Support Bar with the holes in the
Support Blocks. (Figure 9)
2. Insert one M6 x 25 mm Hex Head Screw through the hole
in the Support Block on the Left Column and into the
Support Bar.
3. Tighten the M6 x 25 mm Hex Head Screw, using the Hex
Key.
4. Repeat steps 2-3 for the Right Column.
5. Determine the desired mounting height for the Media Shelf
Assembly.
6. Hold the Media Shelf Assembly and loosen the two Hex
Screws that secure the Support Block to the Left Column,
using the Hex Key.
Note: Continue to support the weight of the Media Shelf
Assembly until all of the Support Block Hex Screws have
been tightened.
7. Repeat step 6 for the Support Block in the Right Column.
8. Slide the Media Shelf Assembly up or down to the desired
height.
9. Tighten all four Support Block Hex Screws, using the Hex
Key.
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the TV Mounting Brackets
1. Place the TV on a padded surface, screen side down, so the
back of the TV is accessible. (Figure 10)
2. (Optional) Identify and remove the pre-installed VESA
Hardware from the back of the TV.
Note: Not all TVs will have placeholder VESA Hardware.
Only remove the four Screws for the VESA Mount. Do not
remove any of the screws from the TV’s structural assembly.
3. Place a Rectangular Washer and the necessary number of
Small and/or Large Spacers over each VESA Mounting
Hole.
4. Place the TV Mounting Brackets, parallel to one another,
on the back of the TV over the VESA Mounting Holes. The
arrows on the TV Mounting Brackets should be pointing
towards the bottom of the TV.
TV
Figure 10
TV Mounting
Bracket
Spacers
M-Type Screw Rectangular Washer
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Thread the appropriately sized M-Type Screws (e.g. M5 x
14 mm Screws) through the Rectangular Washers, TV
Mounting Brackets, (Optional) Spacers, and into the TV.
Note: Each Rectangular Washer features two holes. Select
the hole that ts the M-Type Screws.
6. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the TV Mounting Brackets.
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
Hang the TV onto the Universal Plate
1. Loosen the 2 Screws, located at the bottom of the TV
Mounting Brackets, using a Phillips Head Screwdriver.
(Figure 11)
Figure 11
Screw
Padlock
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. With two people, lift and hang the TV onto the Universal
Plate.
Tip: Align the top hooks of the TV Mounting Brackets with
the top rails of the Universal Plate.
3. Tighten the 2 Screws in the bottom of the TV Mounting
Brackets using the Phillips Head Screwdriver.
4. (Optional - locking) Insert a Padlock through the holes
located at the bottom of either TV Mounting Bracket.
Assemble the Camera Shelf
1. Hold the Camera Shelf up against the top of the
Connecting Plate, aligning the three holes in the top of the
Camera Shelf with the three holes in the Connecting Plate.
(Figure 12)
2. Insert three M4 x 6 mm Screws through the three holes
in the top of the Camera Shelf and into the top of the
Connecting Plate.
3. Tighten all three M4 x 6 mm Screws, using a Phillips Head
Screwdriver.
Figure 12
Camera
Shelf
Connecting
Plate
M4 x
6 mm
Screws
M4 x 6 mm
Round Head
Screws
20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Insert two M4 x 6 mm Round Head Screws through
the back of the Camera Shelf and into the back of the
Connecting Plate.
5. Tighten the two M4 x 6 mm Round Head Screws, using a
Phillips Head Screwdriver.
Attach the Camera Shelf Assembly
1. Determine the desired mounting height of the Camera
Shelf above the TV.
2. Hold the Camera Shelf Assembly up against the back of the
Universal Plate at the desired mounting height, aligning the
slots in the Connecting Plate with the two holes in the back
of the Universal Plate. (Figure 13)
3. Insert two M6 x 25 mm Screws through the Connecting
Plate and into the Universal Plate.
4. Tighten the two M6 x 25 mm Screws, using a Phillips Head
Screwdriver.
Figure 13
M6 x
25 mm
Screws
Connecting
Plate
21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Cable Management
1. Route the Cables from the back of the TV into the
Grommets located at the top-front of the Columns. (Figure
14)
Note: All Grommets are removable.
2. Route the Cables through the Columns.
3. Route the Cables out of the Grommets located at the
bottom-front of the Columns and into their respective
Power Source and/or Video Source.
Figure 14
Grommet
(removable)
22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Operation
Adjust the Tilt Angle of the TV Mounting Brackets
1. Loosen the two Nuts on the outward facing side of one TV
Mounting Bracket, using the Wrench.
Note: Do not completely loosen the Nuts.
2. Repeat step 1 for the second TV Mounting Bracket.
3. Tilt the TV to the desired angle.
Note: Two People are required for all tilt adjustments.
4. Tighten the four Nuts that were loosened in steps 2-3, using
the Wrench.
Move the Mobile TV Stand Assembly
Warning! Never attempt to move the Mobile TV Stand
Assembly with one person. A minimum of two people are
required to move the Mobile TV Stand Assembly.
1. Disconnect and remove the Web Camera and Media Device
from the Mobile TV Stand Assembly.
2. Unplug all the Cables plugged into the TV (i.e. Power and
Video Cables).
3. Disengage the Brakes on the Casters.
4. Grip the Plastic Handles and slowly move the Mobile
TV Stand Assembly, using two people. Ensure caution is
exercised around corners or when navigating over bumps
and/or uneven ground.
5. Lock the Brakes on the Casters.
23
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need.
From the latest technology to legacy products — and all the parts that bridge
the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd.,
Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support