StarTech.com STNDMTVDUO User Manual
Displayed below is the user manual for STNDMTVDUO by StarTech.com which is a product in the TV Mounts category. This manual has pages.
Related Manuals
Manual Revision: 10/22/2021
User Manual
For the latest information and specications visit
www.startech.com/STNDMTVDUO
Mobile Media Center for Dual Flat-Screen TVs
SKU#: STNDMTVDUO
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
Mesures de sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
Misure di sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Assemble this product according to the instructions.
• Read the entire manual and ensure the instructions are fully understood
before assembling and/or using this product.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage.
• Weight capacity of the Multimedia Shelf: 5 kg (11 lb.)
• Weight capacity of the Camera Shelf: 5 kg (11 lb.)
• Weight capacity of the TV mount: 50 kg (110 lb.) x 2
• Do not allow children to climb on this product, or use this product without
proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Assembling this product is a two-person task. Do not attempt to assemble
this product and install equipment without assistance.
• Before adding equipment to this product, ensure the product has been
properly assembled and installed, and that the product can support the
weight of the added equipment.
• Make sure all of the equipment has been properly installed before adjusting
this product.
• Do not move the cart over cords, cables, or uneven surfaces.
• Before moving the cart, unlock the Casters (B).
• Tipping Hazard! This product is freestanding and therefore prone to tipping
if mishandled or overloaded. Exercise caution when moving, loading,
unloading and adjusting the product. Failure to do so could result in
equipment damage and/or personal injury.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar
montera och använda produkten.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom.
• Viktkapacitet multimedia hylla: 5 kg
• Viktkapacitet kamera hylla: 5 kg
• Viktkapacitet fäste för TV: 50 kg x 2
• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.
iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i
när du skruvar åt kan du sluta skruva åt.
• Det krävs två personer för att montera produkten. Försök inte montera
produkten och installera utrustning utan hjälp.
• Innan du lägger till utrustning på produkten, se till att produkten är korrekt
monterad, installerad och att produkten klarar av vikten på utrustningen som
du lägger till.
• Se till att all utrustning är korrekt installerad innan du börjar justera
produkten.
• Flytta inte vagnen över kablar eller ojämna ytor.
• Innan du börjar ytta på vagnen, se till att hjulen är upplåsta.
• Tippningsrisk! Denna produkt är fristående och kan därför tippas om den
hanteras felaktigt eller överbelastas. Var försiktig när du yttar, lastar, lossar
och justerar produkten. Underlåtenhet att göra det kan leda till skador på
utrustningen och / eller personskada.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Lees de gehele handleiding en zorg dat u de instructies begrijpt voordat u dit
product in elkaar zet en gebruikt.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting van
dit product kan letsel of materiële schade veroorzaken.
• Gewichtscapaciteit van het multimedia oppervlak: 5 kg
• Gewichtscapaciteit van het bovenste oppervlak (voor camera): 5 kg
• Gewichtscapaciteit van de schermbevestiging (voor televisie): 50 kg x 2
• Geef kinderen geen toestemming om op dit apparaat te klimmen of dit
product zonder goed toezicht te gebruiken.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten worden
gebruikt.
• Draai de schroeven niet te strak vast wanneer u dit product in elkaar zet. Als u
weerstand voelt tijdens het vastdraaien van de schroeven, stop dan.
• Dit product moet met twee personen in elkaar worden gezet. Probeer dit
product niet zonder hulp in elkaar te zetten en apparatuur te installeren.
• Voordat u apparatuur aan dit product toevoegt, moet u ervoor zorgen dat
u het op de juiste manier in elkaar hebt gezet en geïnstalleerd, en dat het
product het gewicht van de toe te voegen apparatuur kan ondersteunen.
• Zorg dat u de apparatuur goed installeert voordat u met het aanpassen van
v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
dit product begint.
• Rijd de wagen niet over snoeren, kabels of ongelijke oppervlakken.
• Voordat u de wagen gaat verplaatsen, moet u de zwenkwielen ontgrendelen.
• Kantelgevaar! Dit product is vrijstaand en kan daarom kantelen bij verkeerde
behandeling of overbelasting. Wees voorzichtig bij het verplaatsen, laden,
lossen en aanpassen van het product. Als u dit niet doet, kan dit leiden tot
schade aan de apparatuur en / of persoonlijk letsel.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解して
から組み立て作業を始めて下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載
重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあります。
• マルチメディア棚の総耐荷重:5kg
• カメラ棚の総耐荷重:5kg
• TVマウンタの総耐荷重:50kgx2
• 本製品に小さなお子様が乗って遊ばないようにして下さい。お子様が使用
する際には、適切な監視を怠らないようにして下さい。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
• 本製品を組み立てる際、ネジを締めすぎないようにして下さい。ネジを締め
ているうちに手応えを感じたら、締めるのを止めてください。
• 本製品は、二人がかりでの組み立てを想定しています。手助けなしに単独で
組み立てと設置を行わないで下さい。
• 本製品に装置を積載する前に、組み立てと設置が適切に行われたか確認し
て下さい。また、積載する装置の重量に本製品が対応しているか確認して
下さい。
• 転倒注意！モニタが一番高い位置にある状態でカートを動かさないで下さ
い。また、モニタを押してカートを動かすのはやめて下さい。
• コードやケーブルの上、または凹凸のある床面でカートを移動させないで
下さい。
• チップの危険。この製品は自立型であるため、取り扱いを誤ったり、過負荷
になったりすると転倒しやすくなります。製品を移動、ロード、アンロード、お
よび調整するときは注意してください。そうしないと、機器の損傷や人身事
故につながる可能性があります。
vi
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni
prima di iniziare ad assemblare e a utilizzare questo prodotto.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni.
• Portata massima del ripiano multimediale: 5 kg
• Portata massima del ripiano per camera: 5 kg
• Portata massima del support per TV: 50 kg x 2
• Non consentire ai bambini di arrampicarsi sul prodotto o di utilizzarlo senza
un’adeguata supervisione.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• Durante l’assemblaggio del prodotto, non stringere troppo le viti. Se si
incontra resistenza mentre si stringono le viti, interrompere l’operazione.
• L’assemblaggio di questo prodotto richiede la presenza di due persone.
Non tentare di assemblare il prodotto e installare le apparecchiature senza
assistenza.
• Prima di aggiungere altre apparecchiature al prodotto, assicurarsi di averlo
assemblato e installato correttamente e che sia in grado di sostenere il peso
dell’apparecchiatura in questione.
• Assicurarsi di aver installato correttamente tutte le apparecchiature prima di
procedere alla regolazione del prodotto.
• Non far passare il carrello sopra corde, cavi o superci irregolari.
• Prima di procedere allo spostamento del carrello, vericare di aver sbloccato
le rotelle.
• Rischio di ribaltamento! Questo prodotto è indipendente e quindi incline
a ribaltarsi se maneggiato in modo improprio o sovraccarico. Prestare
attenzione durante lo spostamento, il caricamento, lo scaricamento e la
regolazione del prodotto. In caso contrario, potrebbero vericarsi danni alle
apparecchiature e / o lesioni personali.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions
avant de commencer à assembler et utiliser ce produit.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels.
• Capacité de poids de l’étagère multimédia : 5 kg
vii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Capacité de poids de l’étagère pour caméra : 5 kg
• Capacité de poids du support d’écran : 50 kg x 2
• N’autorisez pas les enfants à grimper sur ce produit ni à l’utiliser sans
surveillance.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Ne serrez pas trop les vis lors de l’assemblage de ce produit. Si vous
rencontrez une résistance lors du serrage des vis, cessez de serrer.
• L’assemblage de ce produit nécessite deux personnes. Ne tentez pas
d’assembler le produit et d’installer les équipements sans aide.
• Avant d’ajouter des équipements au produit, vériez que vous l’avez
correctement assemblé et installé, et que le produit peut supporter le poids
des équipements que vous y ajoutez.
• Veillez à installer correctement tous les équipements avant de commencer à
ajuster le produit.
• Ne faites pas rouler le meuble sur des cordons, des câbles ou des surfaces
inégales.
• Avant de déplacer le meuble, veillez à débloquer les roulettes.
• Risque de basculement! Ce produit est autonome et donc enclin à basculer
s’il est mal manipulé ou surchargé. Faites preuve de prudence lors du
déplacement, du chargement, du déchargement et du réglage du produit. Le
non-respect de cette consigne peut entraîner des dommages matériels et /
ou des blessures corporelles.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Leia todo o manual e certique-se de que entende as instruções antes de
começar a montar e a utilizar este produto.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade.
• Capacidade de carga de la bandeja multimídia: 5 kg
• Capacidade de carga de la bandeja de câmera: 5 kg
• Capacidade de carga de suporte para TV: 50 kg x 2
• Não deixar as crianças trepar neste produto ou utilizar este produto sem a
devida supervisão.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Quando montar este produto, não aperte demasiado os parafusos. Se
encontrar resistência enquanto aperta os parafusos, pare de apertar.
• Montar este produto é uma tarefa para duas pessoas. Não tentar montar este
produto e instalar o equipamento sem assistência.
viii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Antes de adicionar o equipamento a este produto, certique-se de que o
montou e instalou devidamente e de que o produto pode suportar o peso do
equipamento que está a adicionar ao mesmo.
• Certique-se de que instala devidamente todo o seu equipamento antes de
começar a ajustar este produto.
• Não mova o carro pelos os, cabos ou superfícies irregulares.
• Antes de começar a mover o carro, certique-se de que desbloqueia os
rodízios.
• Derrubando o perigo! Este produto é independente e, portanto, sujeito a
tombar se for manuseado incorretamente ou sobrecarregado. Tenha cuidado
ao mover, carregar, descarregar e ajustar o produto. Não fazer isso pode
resultar em danos ao equipamento e / ou ferimentos pessoais.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones
antes de proceder con el ensamblaje y el uso de este producto.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad.
• Capacidad de carga del estante multimedia: 5 kg
• Capacidad de carga del estante de la cámara: 5 kg
• Capacidad de carga del soporte de TV: 50 kg x 2
• No permita que los niños se suban a este producto o que lo utilicen sin la
debida supervisión de un adulto.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• Cuando ensamble este producto, no apriete los tornillos más de lo debido. Si
al apretar los tornillos siente resistencia, no los apriete más.
• Se requieren dos personas para el ensamblaje de este producto. No intente
ensamblar este producto e instalar otros equipos sin la debida asistencia de
otra persona.
• Antes de instalar equipos en este producto, asegúrese de haberlo
ensamblado correctamente, a n de que pueda soportar el peso del equipo
que vaya a instalar.
• Asegúrese de que ha instalado todo el equipo correctamente antes de
efectuar ajustes de este producto.
• No desplace el carrito encima de cables o supercies desniveladas.
ix
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Antes de empezar a mover el carrito, asegúrese de haber desbloqueado
las ruedas. Antes de empezar a mover el carrito, asegúrese de haber
desbloqueado las ruedas.
• ¡Peligro de vuelco! Este producto es independiente y, por lo tanto, propenso
a volcarse si se manipula incorrectamente o se sobrecarga. Tenga cuidado al
mover, cargar, descargar y ajustar el producto. El no hacerlo podría resultar
en daños al equipo y / o lesiones personales.
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Bevor Sie dieses Produkt montieren und verwenden, lesen Sie das gesamte
Handbuch und vergewissern Sie sich, dass Sie die Anweisungen verstanden
haben.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
• Gewichtskapazität des Multimedia Fachbodens: 5 kg
• Gewichtskapazität des Kamera Fachbodens: 5 kg
• Gewichtskapazität der TV Halterung: 50 kg x 2
• Gestatten Sie Kindern nicht, auf das Produkt zu klettern oder das Produkt
ohne Aufsicht zu benutzen.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Achten Sie bei der Montage des Produkts darauf, die Schrauben nicht zu
fest anzuziehen. Sobald Sie beim Anziehen der Schrauben auf Widerstand
stoßen, stellen Sie das Anziehen ein.
• Die Montage dieses Produkts ist auf die Ausführung von zwei Personen
ausgelegt. Versuchen Sie nicht ohne Hilfe, dieses Produkt zu montieren und
Geräte zu installieren.
• Bevor Sie Geräte zu diesem Produkt hinzufügen, vergewissern Sie sich, dass
Sie es ordnungsgemäß montiert und installiert haben und dass das Produkt
das Gewicht der Geräte, die Sie hinzufügen möchten, tragen kann.
• Sorgen Sie dafür, dass all Ihre Geräte ordentlich installiert sind, bevor Sie
dieses Produkt justieren.
• Bewegen Sie den Wagen nicht über Leitungen, Kabel oder unebenes
Gelände.
• Stellen Sie sicher, dass die Rollen entriegelt sind, bevor Sie den Wagen in
Bewegung setzen.
• Kippgefahr! Dieses Produkt ist freistehend und neigt daher bei falscher
Handhabung oder Überlastung zum Umkippen. Seien Sie vorsichtig, wenn
Sie das Produkt bewegen, laden, entladen und einstellen. Andernfalls kann
es zu Geräteschäden und / oder Verletzungen kommen.
Table of Contents
Compliance Statements ........................................................................i
Safety Statements ..................................................................................ii
Warning Statements ..............................................................................iii
Product Diagram ....................................................................................1
Front-Angled View .................................................................................................................................... 1
Product Dimensions ..............................................................................2
Front View .................................................................................................................................................... 2
Product Information ..............................................................................3
Package Contents .....................................................................................................................................3
Requirements .........................................................................................6
Installation ..............................................................................................7
Attach the Casters (B) ..............................................................................................................................7
Attach the Columns (E&F) to the Base (A) ........................................................................................ 8
Assemble the Universal Plates (C) ....................................................................................................... 11
Attach the Universal Plates (C) to the Columns (E+F) .................................................................. 12
Assemble the Media Shelf (K) ............................................................................................................... 13
Attach the Media Shelf (K) to the Columns ..................................................................................... 14
Adjust the Height of the Columns (E+F) ........................................................................................... 16
Attach the TV Mounting Brackets (G+H) ..........................................................................................17
Hang the TV onto the Universal Plate (C) ......................................................................................... 19
Assemble the Camera Shelf (M) ...........................................................................................................20
Attach the Camera Shelf (M) Assembly .............................................................................................21
Cable Management ..................................................................................................................................23
Operation ................................................................................................24
Adjust the Tilt Angle of the TV Mounting Brackets ....................................................................... 25
Move the Mobile Media Center Assembly ....................................................................................... 25
Warranty ..................................................................................................26
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front-Angled View
Camera Shelf (M)
Left TV Mounting
Brackets (G)
Connecting Plate (L)
Casters
(B)
Universal
Plates (C)
Left Column (E) Right Column (F)
Right TV Mounting
Brackets (H)
Media Shelf
(K)
Base (A)
Support
Bar (O)
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Front View
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Base (A)
Qty: 1
Casters (B)
Qty: 4
Universal Plates
(C)
Qty: 2
Handles (D)
Qty: 2
Left Column (E)
Qty: 1
Right Column (F)
Qty: 1
Left TV Mounting
Brackets (G)
Qty: 2
Right TV
Mounting
Brackets (H)
Qty: 2
Top Covers (I)
Qty: 2
Connectors (J)
Qty: 2
Media Shelf (K)
Qty: 1
Connecting Plate
(L)
Qty: 1
4
Camera Shelf (M)
Qty: 1 Fixing Plates (N)
Qty: 2
Support Bar (O)
Qty: 1
Knobs (P)
Qty: 2
M6 x 15 mm
Screws (Q)
Qty: 4
M6 x 25 mm
Button Head
Screws (R)
Qty: 2
M6 x 25 mm Hex
Head Screws (S)
Qty: 2
M4 x 6 mm
Screws (T)
Qty: 3
M4 x 6 mm
Button Head
Screws (U)
Qty: 2
M6 x 25 mm Hex
Head Screws (V)
Qty: 2
M6 x 14 mm
Screws (W)
Qty: 10
M8 x 25 mm Hex
Head Screws (X)
Qty: 8
5
M6 x 25 mm
Button Head
Screws (Y)
Qty: 2
Connecting Plate
Spacers (Z)
Qty: 2
Connecting Plate
Washers (A1)
Qty: 2
Hex Key (B1)
Qty: 1
Wrench (C1)
Qty: 1
M5 x 14 mm
Button Head
Screws (M-A)
Qty: 8
M6 x 14 mm
Button Head
Screws (M-B)
Qty: 8
M6 x 30 mm
Button Head
Screws (M-C)
Qty: 8
M8 x 30 mm
Button Head
Screws (M-D)
Qty: 8
M8 x 50 mm
Button Head
Screws (M-E)
Qty: 8
Square Washers
(M-F)
Qty: 8
Small Spacers
(M-G)
Qty: 16
6
Large Spacers
(M-H)
Qty: 16
User Manual
Qty: 1
Requirements
For the latest requirements, please visit
www.startech.com/STNDMTVDUO
• TVs x 2
• (Optional) Web Camera x 1
• (Optional) Media Device (e.g. DVD Player) x 1
• (Optional) Padlocks x 2
• Phillips Head Screwdriver x 1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Attach the Casters (B)
1. Flip the Base (A) upside down and place it onto a clean and
at surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert each of the four Casters (B) into the holes, located in
the bottom of the Base (A) and tighten, using the Wrench
(C1).
3. Flip the Base (A) upright so the Casters (B) are making
contact with the oor.
4. (For uneven surfaces) Flip the Base (A) upside down and use
the Wrench (C1) to adjust the Nut located on each Caster
(B).
Figure 1
Casters (B)
Wrench (C1)
Nut
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 2
Outer Left
Column (E)
Inner Left
Column (E)
Hex Key (B1)
Attach the Columns (E&F) to the Base (A)
1. Determine the desired mounting height for the TV.
2. Hold the inner and outer Left Column (E) in one hand and
loosen the two Hex Screws on the side of the Left Column
(E), using the Hex Key (B1). (Figure 2)
Notes: Two People may be required to complete this step.
Do not release the grip on the inner and outer
portions of the Left Column (E) while the Hex
Screws are loose.
3. Extend the Left Column (E) to the desired mounting height.
Use the built-in Height Indictor, located on the inner
portion of the Left Column (E).
4. Tighten the two Hex Screws, using the Hex Key (B1).
5. Repeat steps 2-4 for the Right Column (F). Ensure both
Columns (E&F) are the same height by referencing the
Height Indicators on the inner portion of each Column.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
9
Figure 3 Base (A)
Handle (D)
Columns
6. Engage the Brake on each one of the four Casters (B) before
proceeding to step 7. (Figure 3)
7. Slide the Left (E) and Right Columns (F) into their
respective receptacles, located in the Base (A).
Note: The Cable Management Holes in the Columns (E+F)
must be facing the front of the assembly.
8. Slide one Handle (D) over the Left Column (E). Ensure the
grip loop portion of the Handle (D) is facing the back of the
Base (A).
Note: The Left Column (E) has not yet been attached to the
Base (A) with a Screw. Exercise caution when sliding the
Plastic Handles (D) over the Columns.
9. Repeat step 8 for the Right Column (F).
10
Figure 4
Base (A)
Hex Key (B1)
M8 x 25 mm
Hex Head
Screws (X)
10. Tilt the entire Assembly onto its side to gain access to the
bottom of the Base (A). (Figure 4)
Note: It is recommended that Two People complete this step
and any subsequent steps that involve tilting or moving the
Mobile TV Cart.
11. Insert four M8 x 25 mm Hex Head Screws (X) through the
Base (A) and into the Left Column (E).
12. Tighten all four M8 x 25 mm Hex Head Screws (X), using
the Hex Key (B1).
13. Repeat steps 11-12 for the Right Column (F).
14. Tilt the entire Assembly back to an upright position.
15. Insert one M6 x 25 mm Hex Head Screw (S) into the back of
the Left Column (E). (Figure 5)
Warning! Do not skip this step. The M6 x 25 mm Screws (E)
serve as important safety stops.
16. Tighten the M6 x 25 mm Screw (E), using a Phillips Head
Screwdriver.
17. Repeat steps 15-16 for the Right Column (F).
11
Assemble the Universal Plates (C)
1. Place the Universal Plates (C) next to one another on a
clean and at surface with the Plastic End Caps facing the
outer edges and the Screw Holes facing down. (Figure 6)
2. Slide one Connector (J) into each Universal Plate (C).
Note: Both Connectors (J) must be oriented the same way.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
M6 x 25 mm
Screw (S)
Figure 6
Plastic
End Cap
Screw Holes
12
3. Flip the Universal Plates (C) and place them next to one
another with the Plastic End Caps facing the outside edges
and the Screw Holes facing up.
4. Slide two Fixing Plates (N) into the grooves of the Universal
Plates (C), located underneath the Screw Holes. Align the
Screw Holes in the Universal Plates (C) with the Holes in
the Fixing Plates (N).
5. Insert four M6 x 14 mm Screws (W) through the Screw
Holes in the Universal Plates (C) and into the Fixing Plates
(N).
6. Tighten all four M6 x 14 mm Screws (W), using a Phillips
Head Screwdriver.
Attach the Universal Plates (C) to the Columns (E+F)
1. Place the Universal Plate Assembly (C+J) atop the Left and
Right Columns (E+F) and align the four screw holes in the
Connectors (J) with the two screw holes in each Column
(E+F). (Figure 7)
2. Insert four M6 x 14 mm Screws (W) through the Universal
Plates (C) and into the Columns (E+F) (two for each
Column (E+F)).
3. Tighten all four M6 x 14 mm Screws (W), using a Phillips
Head Screwdriver.
Figure 7
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 8
Top Cover (I)
Left Column (E)
4. Ax one Top Cover (I) over each Column (E+F). (Figure 8)
Assemble the Media Shelf (K)
1. Flip the Media Shelf (K) upside down and place on a clean
and at surface.
2. Place the Support Bar (O) up against the Media Shelf (K),
aligning the holes in the Support Bar (O) with the holes
found in the Media Shelf (K). (Figure 9)
Figure 9
14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Hold one of the Knobs (P) up against the outermost hole
in the Support Bar (O) and insert one of the M6 x 25 mm
Button Head Screws (Y) through the square shaped hole in
the Media Shelf (K), the Support Bar (O), and into the Knob
(P).
4. Tighten the Knob, by hand.
5. Repeat steps 3-4 to attach the second Knob.
6. Insert two M6 x 14 mm Screws (W) through the innermost
circular shaped holes in the Media Shelf (K) and into the
Support Bar (O).
7. Tighten the M6 x 14 mm Screws (W), using a Phillips Head
Screwdriver.
Attach the Media Shelf (K) to the Columns
Figure 10
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1. Lower the Media Shelf (K) Assembly from above into the
Supporting Blocks, located on the insides of the Columns
(E+F). Align the holes in the Support Bar (O) with the holes
in the Supporting Blocks. (Figure 10)
2. Insert one M6 x 25 mm Hex Head Screw (V) through the
hole in the Supporting Block on the Left Column (E) and
into the Support Bar (O).
3. Tighten the M6 x 25 mm Hex Head Screw (V), using the
Hex Key (B1).
4. Repeat steps 2-3 for the Right Column (F).
5. Determine the desired mounting height for the Media Shelf
(K) Assembly.
6. Hold the Media Shelf (K) Assembly and loosen the two M6
x 25 mm Hex Head Screws (V) that secure the Support
Block to the Left Column (E), using the Hex Key (B1).
Note: Continue to support the weight of the Media Shelf (K)
Assembly until all of the M6 x 25 mm Hex Head Screws (V)
have been tightened.
7. Repeat step 6 for the Support Block in the Right Column
(F).
8. Slide the Media Shelf (K) Assembly up or down to the
desired height.
9. Tighten all four Support Block Hex Screws, using the Hex
Key (B1).
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjust the Height of the Columns (E+F)
1. Loosen the two Hex Screws in each Column (E+F) (4 Hex
Screws total), using the Hex Key (B1), while supporting the
full weight of the Universal Plate Assembly (C+J).
(Figure 11)
Warning! Once all of the Hex Screws have been loosened,
the full weight of the Universal Plate Assembly (C+J) will
become unsupported. Ensure the full weight of the Universal
Plate Assembly (C+J) is supported until the Hex Screws
have been adequately tightened.
2. Adjust the height of the Universal Plate Assembly (C+J) to
the desired mounting height for the TVs.
3. Tighten the two Hex Screws in each Column (E+F) (4 Hex
Screws total), loosened in Step 1, using the Hex Key (B1).
Figure 11
Hex
Screws
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the TV Mounting Brackets (G+H)
Figure 12
18
1. Place one TV on a at, clean, and padded surface with the
screen side down. (Figure 12)
2. (Optional) Identify and remove the pre-installed VESA
Hardware from the back of the TV.
Note: Not all TVs will have placeholder VESA Hardware.
Only remove the four Screws for the VESA Mount. Do not
remove any of the screws from the TV’s structural assembly.
3. Place the necessary number of Small (M-G) and/or Large
Spacers (M-H) over each VESA Mounting Hole.
4. Place the Left (G) and Right (H) TV Mounting Brackets,
parallel to one another, on the back of the TV over the VESA
Mounting Holes. The arrows on the TV Mounting Brackets
(G+H) should be pointing towards the top of the TV.
5. Thread the Square Washers (M-F) over the appropriately
sized M-Type Screws.
6. Thread the appropriately sized M-Type Screws (e.g. M5 x 14
mm Screws (M-A)) through the Square Washers (M-F), TV
Mounting Brackets (G+H), (Optional) Spacers (M-G + M-H),
and into the TV.
Note: Each Square Washer (M-F) features two holes. Select
the hole that ts the selected M-Type Screws.
7. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the TV Mounting Brackets (G+H).
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
M-Type Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.
8. Repeat steps 1-6 for the second TV.
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hang the TV onto the Universal Plate (C)
Warning! Ensure the TVs are correctly mounted onto the
Universal Plates (C) and the locking mechanisms are
properly engaged before releasing the displays.
1. Select the rst TV to be mounted and loosen the 2 Screws,
located at the bottom of the TV Mounting Brackets (G+H),
using a Phillips Head Screwdriver. (Figure 13)
Note: Loosening the Screws lowers the locking mechanisms,
located on the TV Mounting Brackets (G+H). Ensure the
Screws have been loosened enough for the TV Mounting
Brackets (G+H) to be attached to the Universal Plates (C).
2. With two people, lift and hang the TV onto the Universal
Plates (C).
Note: Ensure the hooks on the TV Mounting Brackets
(G+H) are hung over the top edge of the Universal Plates
(C).
3. Tighten the 2 Screws in the bottom of the TV Mounting
Brackets (G+H), using the Phillips Head Screwdriver.
Figure 13
20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. (Optional - Locking) Insert a Padlock (not included) through
the holes, located at the bottom of either TV Mounting
Bracket (G+H).
5. Repeat steps 1-4 for the second TV.
Assemble the Camera Shelf (M)
1. Hold the Camera Shelf (M) up against the top of the
Connecting Plate (L), aligning the three holes in the
top of the Camera Shelf (M) with the three holes in the
Connecting Plate (L). (Figure 14)
2. Insert three M4 x 6 mm Screws (T) through the three holes,
located in the top of the Camera Shelf (M) and into the top
of the Connecting Plate (L).
3. Tighten all three M4 x 6 mm Screws (T), using a Phillips
Head Screwdriver.
4. Insert two M4 x 6 mm Button Head Screws (U) through the
two holes, located in the back of the Camera Shelf (M) and
into the back of the Connecting Plate (L).
5. Tighten the two M4 x 6 mm Button Head Screws (U), using
a Phillips Head Screwdriver.
Figure 14
21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Camera Shelf (M) Assembly
Figure 15
22
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1. Prepare two M6 x 25 mm Button Head Screw (R)
Assemblies by threading a Connecting Plate Washer (A1)
over each M6 x 25 mm Button Head Screw (R).
2. Select the two openings in the Connecting Plate (L) that
will provide the optimal mounting height for the Camera
Shelf. Insert one of the M6 x 25 mm Button Head Screw
(R) Assemblies through the Connecting Plate (L). Insert
the second M6 x 25 mm Button Head Screw (R) Assembly
through the opening next to the rst M6 x 25 mm Button
Head Screw (R) Assembly.
Slide one Connecting Plate Spacer (Z) over each of the
M6 x 25 mm Button Head Screw (R) Assemblies. This
completes the Camera Shelf (M) Assembly.
3. Lift and hold the Camera Shelf (M) Assembly against the
back of the Universal Plates (C) and align the M6 x 25 mm
Button Head Screw (R) Assemblies with the holes in the
back of the Universal Plates (C).
4. Begin to tighten the two M6 x 25 mm Button Head Screw
(R) Assemblies , using a Phillips Head Screwdriver.
Before tightening the M6 x 25 mm Button Head Screw (R)
Assemblies all the way, adjust the height of the Camera
Shelf (M) Assembly. Once at the desired height, nish
tightening the two M6 x 25 mm Button Head Screw (R)
Assemblies , using a Phillips Head Screwdriver.
23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Cable Management
1. Route the Cables from the back of the TVs into the
Grommets located at the top-front of the Columns (E+F).
(Figure 16)
Note: All the Grommets are removable.
2. Push the Cables through the Columns (E+F).
3. Route the Cables out of the Grommets, located at the
bottom-front of the Columns and into the respective Power
and/or Video Sources.
Figure 16
24
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Operation
Figure 17
25
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjust the Tilt Angle of the TV Mounting Brackets
1. Loosen the two Nuts on the outward facing side of one TV
Mounting Bracket (G or H), using the Wrench (C1).
2. Repeat step 1 for the second TV Mounting Bracket (G or H).
3. Tilt the TV to the desired angle.
Note: Two People are required for all tilt adjustments.
4. Tighten the four Nuts that were loosened in steps 1-2, using
the Wrench (C1).
Move the Mobile Media Center Assembly
Warning! Never attempt to move the Mobile Media Center
Assembly with one person. A minimum of two people are
required to move the Mobile Media Center Assembly.
1. Disconnect and remove the Web Camera and any Media
Devices from the Mobile Media Center Assembly.
2. Unplug and move any Cables that may interfere with,
or prevent, the movement of the Mobile Media Center
Assembly.
3. Disengage the Brakes on the Casters (B).
4. Grip the Handles (D) and the top corners of the TVs and
slowly move the Mobile Media Center Assembly, using two
people. Ensure caution is exercised around corners or when
navigating over bumps and/or uneven ground.
5. Once at the selected location, lock the Brakes on the
Casters (B).
26
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or
their ocers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of
prots, loss of business, or any pecuniary loss, arising out of or related to the use
of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan.
It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old
and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and
technology parts. StarTech.com was founded in 1985 and has operations in the
United States, Canada, the United Kingdom and Taiwan servicing a worldwide
market.
Reviews
Share your experiences using StarTech.com products, including product
applications and setup, what you love about the products, and areas for
improvement.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
StarTech.com
Ltd.
45 Artisans
Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com
Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com
LLP
4490 South
Hamilton Road
Groveport, Ohio
43125
U.S.A.
StarTech.com
Ltd.
Siriusdreef 17-27
2132 WT
Hoofddorp
The Netherlands