StarTech.com USB2001EXTV User Manual
Displayed below is the user manual for USB2001EXTV by StarTech.com which is a product in the Console Extenders category. This manual has pages.
Related Manuals
Manual Revision: 02/22/2021
For the latest information, technical specications, and support for
this product, please visit www.startech.com/USB2001EXTV.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida pe r l’uso - it.startech.com
USB2001EXTV
1-Port USB 2.0-Over-Cat5-or-Cat6 Extender Kit
*actual product may vary from photos
Instruction manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (A)/NMB-3(A)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected
names and/or symbols of third-party companies not related in any way to StarTech.com.
Where they occur these references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any
direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction manual
i
Table of Contents
Introduction ............................................................................................ 1
Packaging contents .................................................................................................................................. 1
System requirements ............................................................................................................................... 1
Product diagram ....................................................................................2
Front view .................................................................................................................................................... 2
Rear view ...................................................................................................................................................... 2
Installing the extender .......................................................................... 3
Install the extender................................................................................................................................... 3
Technical support ...................................................................................4
Warranty information ............................................................................ 4
Instruction manual
1
Introduction
This 1-port USB 2.0 extender lets you connect a USB peripheral device up to 50 m (165
ft.) away from your host computer. Now you can place your USB 2.0 device exactly
where you need it, and you can overcome the 16 ft. USB cable length limitation to
create a more exible and ecient workspace.
Packaging contents
• 1 x USB 2.0 extender local unit
• 1 x USB 2.0 extender remote unit
• 1 x USB 2.0 cable
• 1 x RJ45 cable
• 8 x rubber feet
• 1 x universal power adapter (NA/JP, UK, EU, ANZ)
• 1 x quick-start guide
System requirements
• A host computer with an available USB-A port (USB Type-A)
• An AC electrical outlet
• Terminated RJ45 Cat5e or better Ethernet cable
Operating system requirements are subject to change. For the latest requirements,
please visit www.startech.com/USB2001EXTV.
Instruction manual
2
Product diagram
Front view
Rear view
LED
USB Micro-B host port
RJ45 port
USB-A port
RJ45 port
DC power input
LED
Instruction manual
3
Installing the extender
The USB2001EXTV features both a local and a remote extender unit. The local extender
connects to your host computer system, while the remote extender connects with
your remote USB device. Both devices are then connected together using standard
Cat5e cable.
The provided power adapter must be connected to the remote unit in order for the
extender to function properly. Follow the instructions below to install the extender.
Install the extender
1. Connect the USB 2.0 cable (included) to the local unit’s host port and to the host
computer’s USB-A port.
2. Connect a Cat5e Ethernet cable to the local unit’s RJ45 port and to the remote unit’s
RJ45 port.
3. Connect your USB peripheral device to the remote unit’s USB-A port.
4. Select the appropriate power cord for your region (NA/JP, UK, EU, or ANZ) and
connect it to the power adapter.
5. Connect the power adapter to an AC electrical outlet and to the remote unit’s DC
power input port.
Notes:
• Do not route the Ethernet cable through any networking equipment (for example, a
router, or a switch).
• Ensure that your Ethernet cable is long enough to connect the local unit to the remote unit
(maximum extension distance is 50 m, or 165 ft.).
• If your host computer enters Sleep, Standby, Hibernate, or Power Save mode, the
USB extension functionality may fail upon wake up. To ensure proper operation,
don’t allow your host computer to enter these modes. Consult your computer’s
documentation to ensure these modes are not enabled, and for instructions on how
to disable any enabled modes.
Instruction manual
4
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.