StarTech.com USB3VDOCK4DP User Manual
Displayed below is the user manual for USB3VDOCK4DP by StarTech.com which is a product in the Notebook Docks & Port Replicators category. This manual has pages.
Related Manuals
Manual Revision: 01/04/2016
For the latest information, technical specications, and support for
this product, please visit www.startech.com/USB3VDOCK4DP
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
USB3VDOCK4DP
Laptop Docking Station - 4K DisplayPort
*actual product may vary from photos
Instruction manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction manual
i
Table of Contents
Packaging contents ...............................................................................1
System requirements.............................................................................1
Product diagram ....................................................................................2
Front view .................................................................................................................................................... 2
Rear view ...................................................................................................................................................... 2
About USB 3.0 and USB 3.1 Gen 1 .......................................................3
About installation ..................................................................................3
Install the hardware..................................................................................................................................3
About the docking station ports .........................................................4
Charge a device ......................................................................................4
Congure a display device ....................................................................4
About the display options ..................................................................................................................... 5
Use Mac OS to congure a display device ....................................................................................... 6
Use Mac OS to change the display mode ......................................................................................... 6
Supported video resolutions ...............................................................6
Technical support ...................................................................................7
Warranty information ............................................................................ 7
Instruction manual
1
Packaging contents
• 1x laptop docking station
• 1x USB 3.0 host cable
• 1x universal power adapter (NA/EU/UK/AU)
• 1x instruction manual
System requirements
• USB-enabled host computer system with an available USB 3.0 port
• Available AC electrical outlet
• DisplayPort™ enabled display with cables as desired (for additional external
displays)
• Windows® 7 (32-bit and 64-bit)
• Windows 8 (32-bit and 64-bit)
• Windows 8.1 (32-bit and 64-bit)
• Mac OS® 10.8 and later (tested up to 10.10)
Note: If you connect the docking station to a USB 2.0 host port or if you use a USB 2.0
host connection cable, performance may be limited.
Operating system requirements are subject to change. For the latest requirements,
please visit http://www.startech.com/USB3VDOCK4DP.
Instruction manual
2
Product diagram
Front view
Rear view
USB 3.0 fast-charge and
sync
3.5mm TRRS headset port
(audio and microphone)
DC input
port
USB 3.0
host port
USB 3.0
ports
DisplayPort
video port
Gigabit
RJ45 port
Security
lock port
Instruction manual
3
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard oers speeds up to
5 Gbps.
About installation
Depending on the version of operating system that you’re currently running and
whether your network connection is active, the docking station might install
automatically or download the proper drivers when the dock is connected to an
available USB port on the host system.
If you receive a prompt to automatically install the driver, follow the on-screen
instructions to complete the installation.
Install the driver
On your computer, use a web browser to navigate to http://www.startech.com/
USB3VDOCK4DP.
2. Click the Support tab.
3. Click the driver le and complete the on-screen instructions to download the le.
4. Browse to the location of the driver le that you downloaded and do one of the
following:
• If the operating system that you’re using is a version of Windows, run the DisplayLink
“exe” install le.
• If the operating system that you’re using is a version of Mac OS, run the DisplayLink
“dmg” install le.
5. Follow any on-screen instructions to complete the driver installation process.
Note: You may be asked to restart your host laptop(s) to complete the installation.
Install the hardware
1. Select the appropriate regional clip for your region and connect the power adapter
to an AC electrical outlet.
2. Connect the power adapter to the DC input on the docking station.
3. Attach the provided USB 3.0 cable to the USB 3.0 port on the docking station and
then to an available USB 3.0 port on the host laptop.
4. Connect your DisplayPort display to the DisplayPort connection on the docking
station.
5. As necessary, connect any other devices to the docking station, including an RJ45
network connection, USB peripherals, a headset, speakers, or microphones.
Instruction Manual
4
About the docking station ports
The two USB ports located at the back of the docking station are standard USB 3.0
throughput ports. When the docking station is connected to a host laptop, these ports
provide a trickle charge to a selection of devices.
The front USB 3.0 port is compliant with Battery Charging Specication Revision 1.2 (BC
1.2), which means that you can use the port to connect and charge a device faster than
a traditional standard USB 3.0 port.
This front USB 3.0 port can fast-charge a connected device, even when the docking
station isn’t connected to a host laptop. When the docking station is connected to a
host laptop, the front USB 3.0 port functions as a Charging Downstream Port (CDP),
which has simultaneous charge and sync capabilities.
Charge a device
If you’re only using the front USB 3.0 port to charge a device, a connection to a host
laptop isn’t required.
• To charge a device, connect it to the USB 3.0 port located on the front of the docking
station.
Note: The front USB 3.0 port can only fast-charge connected devices that comply with
USB Battery Charging Specication Revision 1.2.
Congure a display device
You can use DisplayLink or your computer’s operating system to congure a display
device.
Use DisplayLink to congure a display device – Windows only
1. Connect a display device (monitor, projector, television) to the docking station.
2. If necessary, to display all of the available icons, click the Show hidden icons arrow
on the toolbar.
3. Click the DisplayLink icon.
4. Click StarTech USB3VDOCK4DP.
5. In the drop-down list, click a congurable option.
Each display is congured independently from all of the connected displays.
Note: If you’re using a computer that’s running Windows 7 or Windows 8, you can also
adjust a display device on the Display Settings screen.
Instruction Manual
5
About the display options
The following information describes the display congurations available using the
DisplayLink utility.
Extend
Select this option to display an extension of your active Windows desktop on the
display that’s connected to the docking station. When you select this option, you can
view more applications or documents at the same time. The display is extended in the
direction it was in the last time that the display was in Extend mode.
For more control, click Extend To and select one of the options. This puts the display
into Extend mode and places the display to the right or left, above, or below the
primary display.
Mirror
Select this option to display a duplication of the primary display on the display that’s
connected to the docking station. The resolution, color depth, and refresh rate of the
primary display are replicated on the connected display.
Note: When the connected monitor uses a dierent specication than the primary
display, the system’s primary graphics adapter scales all of the settings to a lower
specication to maintain a uniform aspect ratio.
Extend To
Select this option to specify the physical location of the display that’s connected to the
docking station in relation to the system’s primary monitor.
Screen Resolution
Select this option to change the resolution on the display that’s connected to the
docking station.
Screen Rotation
Select this option to change the orientation in which the screen is viewed. The two
most common orientation types are portrait and landscape.
Set as Main Monitor
Select this option to specify the display that’s connected to the docking station as the
primary display. The primary display shows all of the system notications, and takes
priority with applications.
O
Select this option to disable the display that’s connected to the docking station.
Instruction Manual
6
Use Mac OS to congure a display device
If you’re using a computer that’s running a version of Mac OS, you can adjust a display
device in the Displays section of the Mac System Preferences menu.
Use Mac OS to change the display mode
By default, the docking station is set up as an extended display.
• Do one of the following:
• To change the display to Mirror mode, on the Arrangement screen on a
display, select the Mirror Display check box.
• To change the display to Extend mode, on the Arrangement screen on a
display, clear the Mirror Display check box.
Supported video resolutions
The docking station supports approximately 4K video resolutions.
4K (3840x2160) resolutions can be achieved if the connected DisplayPort display oers
4K support.
See the video resolution chart below for specic congurations and supported
resolutions:
Note: Depending on the conguration and the supported resolutions of your
connected monitor, the docking station may support video resolutions lower than
specied above.
Video Output Max DP Resolution
DisplayPort - Single
Display 3840x2160
Instruction manual
7
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.