Table of Contents
- About This Guide
- Appearance
- Set Up Your Deco
- Add More Decos
- Dashboard
- Check Deco Status
- Manage Connected Devices
- Create New Networks
- Remove/Reboot Deco
- Shortcut
- Automation
- Wi-Fi Settings
- Internet Speed Test
- Network Optimization
- Blacklist
- Online Upgrade
- WPS
- Parental Controls
- Antivirus
- QoS
- Monthly Report
- Managers
- Advanced Features
- Authentication
TP-Link Deco M9 Plus (2-Pack) User Manual
Displayed below is the user manual for Deco M9 Plus (2-Pack) by TP-Link which is a product in the Mesh Wi-Fi Systems category. This manual has pages.
Related Manuals
Smart Home Mesh Wi-Fi System
Whole Home Wi-Fi | Seamless Roaming | Parental Controls | Antivirus
User Guide
AC2200 Smart Home Mesh Wi-Fi System
Deco M9 Plus
1910012979 REV2.0.0 © 2021 TP-Link
Contents
About This Guide ···················································· 1
Appearance ······························································· 2
Set Up Your Deco ··················································· 3
Add More Decos ····················································· 6
Dashboard ·································································· 7
Check Deco Status ··············································· 8
Manage Connected Devices ··························· 9
Create New Networks ········································10
Remove/Reboot Deco ·······································12
Shortcut ·····································································13
Automation ·······························································14
Wi-Fi Settings··························································16
Internet Speed Test ·············································17
Network Optimization ·········································18
Blacklist ······································································19
Online Upgrade ······················································20
WPS ··············································································21
Parental Controls ··················································22
Antivirus ·····································································23
QoS···············································································24
Monthly Report ······················································25
Managers ··································································26
Advanced Features ·············································27
Authentication ························································32
About This Guide
This guide provides a brief introduction to AC2200 Smart Home Mesh Wi-Fi System and the Deco app, as well as regulatory information.
Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions
in this guide are only examples and may not reect your actual Deco experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco Stands for AC2200 Smart Home Mesh Wi-Fi System/Unit.
Underline Hyperlinks are in teal and underlined. You can click to
redirect to a website or a specic section.
Teal Key information appears in teal, including management
page text such as menus, items, buttons and so on.
Note: Ignoring this type of note might result in a malfunction
or damage to the device.
Tips: Indicates important information that helps you make
better use of your device.
More Info
• Specific product information can be found on the product page at
https://www.tp-link.com.
• A community is provided for you to discuss our products at
https://community.tp-link.com.
• Our Technical Support contact information can be found at the Help
center of the Deco app and the Contact Technical Support page at
https://www.tp-link.com/support/.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless transmission rates are the physical rates derived from
IEEE Standard 802.11 specifications. Range, coverage, and maximum
quantity of connected devices are based on test results under normal
usage conditions. Actual wireless data throughput. wireless coverage,
and quantity of connected devices are not guaranteed and will vary
as a result of 1) environmental factors, including building materials,
physical objects, and obstacles, 2) network conditions, including local
interference, volume and density of traffic, product location, network
complexity, and network overhead, and 3) client limitations, including
rated performance, location, connection quality, and client condition.
HomeCare Disclaimer
A basic TP-Link HomeCareTM, powered by Trend MicroTM, package is
included for 3 years from date of activation at no additional cost. It
includes Parental Controls, Quality of Service, and Antivirus. Deactivation
of HomeCareTM will disable certain controls and protections. For a
complete list of HomeCareTM functions, go to https://www.tp-link.com.
IoT Compatibility Disclaimer
IoT compatibility refers only to smart devices that can be controlled
via the Deco app. Other wireless devices can still connect to Deco for
normal Wi-Fi use.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up.
Performance may vary depending on the client device.
2
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below:
Yellow
Start up.
Blue pulse
Deco is ready for setup.
Blue solid
Deco is setting up.
Green
Deco is registered and all is well.
Red
Deco has an issue.
For connecting Deco to your modem, the
Ethernet outlet or other internet devices.
Press for 1 second and release to reset Deco to factory
default settings. The light changing from pulsing yellow to
solid yellow indicates a successful reset.
For connecting Deco to the power socket via
the provided power adapter.
Ethernet Ports:
Reset Button:
Power Slot:
USB Port (Reserved)
3
Set Up Your Deco
The intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online.
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System.
1. Download and install the Deco app
Scan the QR code below or go to Google Play
or the Apple App Store to download the Deco
app. Install the app on your Android or iOS
smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If
you don’t have a TP-Link ID, sign up rst.
Note: If you forgot your login password, tap Forgot password?.
The Deco app will guide you through the rest.
3. Identify your Deco
Choose your Deco model.
4
4. Connect your modem to Deco
Power o your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
5. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom.
6. Set up internet connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
5
7. Create your Wi-Fi network
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
8. Setup complete
Your Deco network is now up. Add more
Decos or complete the setup and connect all
devices to the Deco network.
6
Add More Decos
After created a Deco network, you can add more Deco units into the network to expand the Wi-Fi coverage, and manage them conveniently on your
Deco app.
On the Overview page, Tap After the setup, you can nd the
added Decos by tapping
Select the Deco model you want to
add, and follow app instructions to
complete the setup
7
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status,
create shortcut and automation, and set up various advanced features.
Tap to get an overview of the
network status
Tap > Shortcut to create or
execute shortcut
Tap > Automation to set
interactions between your smart
devices
Tap for more features
8
Check Deco Status
In the Overview page, you can check the working status of all the Decos, check the Deco details, change or customize the location, and more.
Tap to check all Decos' status Tap a Deco unit to check the details Tap the Deco unit to change or
customize the location
9
Manage Connected Devices
In the Overview page, you can check the working status of all the connected devices, view the device details, or change the device settings.
Tap a client on the Network Devices
list to check the details
Tap to manage the device
settings
Tap Belongs to to add a unique prole for
the device and manage its online activities
10
Create New Networks
On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one
account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:
Method 1. Create a new network from the Overview page
Tap > Create New Network Then follow the app instructions to
complete the setup
11
Create New Networks
On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one
account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:
Method 2. Create a new network from the Menu page
Tap to open the Menu Tap > CREATE NEW NETWORK Follow app instructions to complete the
setup
12
Remove/Reboot Deco
You can remove or reboot your Deco easily on the Deco app. Follow the steps below.
Tap to check all Decos' status Tap a Deco unit to enter the details Tap to remove or reboot the Deco
Note: If the LED light of Deco does not turn pulsing
blue after tapping Remove, refer to Appearance to
use the reset button to reset it.
13
Shortcut
Shortcut lets you achieve an action with a simple tap.
Tap > Shortcut > CREATE Add actions Create shortcuts Tap the icon to execute the shortcut
Tap the name to edit the shortcut
14
Automation
Automation allows you to set interactions between your smart devices by adding triggers and actions. For example, if the bedroom light turns on (which
is a trigger), and then the air conditioner in the bedroom will start running (which is an action).
Set eective time Add triggers Add actions
Tap > Automation > CREATE
15
Automation setup completeSet a name for the automation
16
Wi-Fi Settings
You can change the network name and password of your main network, create a separate network for guests to guarantee the security and privacy of
your main network, and shake your device to share the network details easily with family and friends.
Manage your main network (e.g.
change your Wi-Fi network name
and password)
Tap > Wi-Fi Enable guest network Shake to share your network
17
Internet Speed Test
Test your internet speed to see what you can do on your network. You will get an internet speed rating report after the test.
Tap TEST to start testing Get speed test report Tap to check speed test historyTap > Test Internet Speed
18
Network Optimization
Network Optimization lets your Deco intelligently scan for a clearer channel and switch your devices to it, ensuring optimal Wi-Fi performance.
The app will scan the network
automatically
Optimize your network for optimal
Wi-Fi performance
Enjoy your time if your network
status is perfect
Tap > Network Optimization
19
Blacklist
Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the
network.
Add clients to blacklist Add other devices to blacklist Manage blacklist
Tap > Blacklist
20
Online Upgrade
TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date rmware provides better and more
stable network performance. Always update your Deco to the latest rmware version when prompted in the Deco app.
Follow app instructions to update your Deco to
the latest version
Tip: If the rmware update fails, please reboot the main Deco,
move the Satellite Deco closer to the main Deco, then try to
update again.
Tap > Update Deco
21
WPS
WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to a network with a tap without entering any password.
Tap the WPS icon on Deco app and then
on your client
Your device connects to the network
successfully if shown as below
Tap > WPS
22
Parental Controls
Parental Controls allows you to filter content, limit time spent online and check internet history. Start by creating unique profiles for your family
members.
Create unique proles for family
members
Set lter level to block unappropriate
contents
Set daily time limits for the total time
spent online
Tap > Parental Controls
23
Antivirus
Deco’s Antivirus feature blocks malicious websites to ensure you can safely surf the internet, protects your network against external attacks and
eliminates vulnerabilities, and prevents infected devices from sending sensitive information or security threats to devices outside your network. Enable
them all to keep your network safe all the time.
Enable the Antivirus features as needed Add a website to Whitelist that will not be
blocked.
Tap > Antivirus
24
QoS
QoS (Quality of Service) helps you set priority for specic applications and devices, so that they can perform better with lower latency.
Set the total bandwidth before using
QoS
Tap to prioritize the online activity
that's most important
Add devices you want to prioritize
to guarantee a better network
performance
Tap > QoS
25
Monthly Report
Review the monthly usage statistics, such as security threats and total connected network devices each day.
View monthly reports Enable or disable monthly report Clear monthly report data
Tap > Monthly Report
26
Managers
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.
Add other accounts as managers Remove managerSet privileges for managers
Tap > Managers
27
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), add IPv6 rewall rules, modify LAN IP, set up
DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a specic device, set up port forwarding rules to make your local
computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change
the working mode, and congure the notication settings.
View IPv4 details or change the
internet connection type
Enable IPv6 to set up an IPv6
internet connection
Add IPv6 rewall rules to allow
specic devices to access the
specied services
Tap > Advanced
29
Reserve IP addresses for specic
devices to recognize and manage
the device more easily
Set up port forwarding rules to
enable devices in your network
accessible over the internet with
safety
Register a TP-Link DDNS domain
name to access your router and local
servers using a domain name
Enable SIP ALG to communicate
with SIP (Session Initiation Protocol)
servers via NAT)
30
Enable Fast Roaming to allow
your wireless devices to switch
connection to dierent Decos
Enable UPNP to enable devices on
your local network to dynamically
open ports for applications such as
multiplayer gaming
Enable Beamforming to concentrate
Wi-Fi signal towards connected
devices for stronger connections
Toggle o LED to turn o the light on
Deco. Configure the Night Mode to
turn o the LED light at bedtime only
31
Change the operating mode
Note: When the Deco works in Access Point
mode, advanced features such as IPv4, Address
Reservation, Port Forwarding, and DHCP server
are not available.
Set connection alerts to receive
notications once the clients
connect to or disconnect from Deco
Set notifications to receive alerts in
the notication bar
32
Authentication
FCC STATEMENT
Product Name: AC2200 Smart Home Mesh Wi-Fi System
Model Number: Deco M9 Plus
Component Name Model
I.T.E POWER SUPPLY T120200-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
33
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date:2021-02-01
FCC compliance information statement
Product Name: I.T.E POWER SUPPLY
Model Number: T120200-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
34
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date:2021-02-01
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
OPERATING FREQUENCY(the maximum transmitted power)
• Wi-Fi: 2412MHz-2472MHz(20dBm) 5150MHz-5250MHz(23dBm) 5470MHz-5725MHz(except for 5600MHz-5650MHz)(30dBm)
35
• Bluetooth: 2402MHz-2480MHz(10dBm)
• Zigbee: 2405MHz-2480MHz(12dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way
of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement
Caution:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile
satellite systems.
DFS (Dynamic Frequency Selection) products that operate in the bands 5470-5600MHz, and 5650-5725MHz.
36
Avertissement:
Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Les produits utilisant la technique d’atténuation DFS (sélection dynamique des fréquences) sur les bandes 5470-5600MHz et 5650-5725MHz.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice & BSMI Notice:
注意！
依據 低功率電波輻射性電機管理辦法
LP0002低功率射頻器材技術規範_章節3.8.2
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
5.7.9.1應避免影響附近雷達系統之操作。
安全諮詢及注意事項
37
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫作。
限用物質含有情況標示聲明書
設備名稱：
Equipment name:
AC2200 Smart Home Mesh Wi-Fi System
型號（型式）：
Type designation (Type)
Deco M9 Plus
單元
Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
PCB ○ ○ ○ ○ ○ ○
外殼 ○ ○ ○ ○ ○ ○
電源供應器 −○ ○ ○ ○ ○
其他及其配件 −○ ○ ○ ○ ○
38
備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
reference percentage value of presence condition.
備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.“ − ”系指該項限用物質為排除項目。
Note 3：The “ − ” indicates that the restricted substance corresponds to the exemption.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,
що передбачені чинними законодавчими актами України.
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t
hesitate to contact us.
39
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Symbol Explanation
DC voltage
Indoor use only
Operator’s manual
Polarity of output terminals
Energy efficiency Marking
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.