Table of Contents
TP-Link Deco X68 User Manual
Displayed below is the user manual for Deco X68 by TP-Link which is a product in the Mesh Wi-Fi Systems category. This manual has pages.
Related Manuals
User Guide
Tri-Band Mesh Wi-Fi 6 System
Whole Home Mesh Wi-Fi 6 System
Superior Mesh Wi-Fi, Everywhere
1910012879 REV1.0.0 © 2020 TP-Link
Contents
About This Guide ··············································· 1
Appearance ·························································· 2
Set Up Your Deco ·············································· 3
Add More Decos ················································ 6
Dashboard ····························································· 7
Check Deco Status ·········································· 8
Manage Connected Devices ······················ 9
Create New Networks ···································10
Wi-Fi Detective ··················································12
Remove/Reboot Deco ··································13
HomeShield ························································14
Wi-Fi Settings·····················································15
Blacklist ·································································16
Online Update ···················································17
Advanced Features ········································18
WPS ·········································································23
Weekly/Monthly Reports ·····························24
Managers ·····························································25
FAQ ··········································································26
Authentication ···················································27
1
About This Guide
This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi 6 System and the Deco app, as well as regulatory information.
Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions
in this guide are only examples and may not reect your actual Deco experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco Stands for Deco Whole Home Mesh Wi-Fi System/Unit.
Underline Hyperlinks are in teal and underlined. You can click to
redirect to a website or a specic section.
Teal Key information appears in teal, including management
page text such as menus, items, buttons and so on.
Note: Ignoring this type of note might result in a malfunction
or damage to the device.
Tips: Indicates important information that helps you make
better use of your device.
More Info
• Specific product information can be found on the product page at
https://www.tp-link.com.
• A Technical Community is provided for you to discuss our products at
https://community.tp-link.com.
• Our Technical Support contact information can be found at the Help
center of the Deco app and the Contact Technical Support page at
https://www.tp-link.com/support.
• Videos about how to congure the Deco can be found on the Setup
Videos page at https://www.tp-link.com/support/setup-video/#deco
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless signal rates are the physical rates derived from
IEEE Standard 802.11 specifications. Actual wireless data throughput
and wireless coverage, and quantity of connected devices are not
guaranteed and will vary as a result of network conditions, client
limitations, and environmental factors, including building materials,
obstacles, volume and density of trac, and client location.
MU-MIMO Disclaimer
Use of MU-MIMO requires clients to also support MU-MIMO.
IoT Compatibility Disclaimer
IoT compatibility refers only to smart devices that can be controlled
via the Deco app. Other wireless devices can still connect to Deco for
normal Wi-Fi use.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up.
Performance may vary depending on the client device.
HomeShield Disclaimer
HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan.
Visit tp-link.com/homeshield for more information.
2
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup
or WPS in progress.
Blue solid:
Deco is setting up.
Green pulse:
Deco is upgrading rmware.
Green solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Gigabit Ethernet ports :
For connecting Deco to your modem, the Ethernet outlet
or other internet devices.
Reset Button:
Press for 1 second and release to reset Deco to factory
default settings. The light changing from pulsing yellow to
solid yellow indicates a successful reset.
Power Slot:
For connecting Deco to the power socket via the provided
power adapter.
3
Set Up Your Deco
The intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online.
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi 6 System.
1. Download and install the Deco app
Scan the QR code below or go to Google Play
or the Apple App Store to download the Deco
app. Install the app on your Android or iOS
smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If
you don’t have a TP-Link ID, sign up rst.
Note: If you forgot your login password, tap Forgot password?.
The Deco app will guide you through the rest.
3. Identify Your Deco
Choose your Deco model.
4
5. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom.
6. Set up internet connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
4. Connect Deco to your modem
Power o your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
5
8. Connect to your Wi-Fi network
Connect your devices to the Deco's Wi-Fi to
continue the setup.
9. Setup complete
Your Deco network is now up. Add more
Decos or complete the setup and connect all
devices to the Deco network.
7. Create your Wi-Fi network
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
6
On the Overview page, Tap Select the Deco model you want to
add, and follow app instructions to
complete the setup
Add More Decos
After created a Deco network, you can add more Deco units into the network to expand the Wi-Fi coverage, and manage them conveniently on your
Deco app.
After the setup, you can find the
added Decos by tapping
7
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status,
customize your home network with enhanced security using a kit of features built to TP-Link HomeShield and set up various advanced features.
Tap to get an overview of the network
status
Tap to enter the HomeShield page for
enhanced security
Tap for more features
8
Check Deco Status
In the Overview page, you can check the working status of all the Decos, check the Deco details, change or customize the location, and more.
Tap the Deco unit to change or
customize the location
Tap to check all Deco's status Tap a Deco unit to check the details
9
Tap a client on the Devices list to
check the details
Manage Connected Devices
In the Overview page, you can check the working status of all the connected devices, view the device details, or change the device settings.
Tap Belongs to to add a unique
profile for the device and manage
its online activities
Tap to manage the device
settings
10
Create New Networks
On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one
account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:
from the Overview page or the Menu page.
Method 1. Create a new network from the Overview page
Tap > Create New Network Then follow the app instructions to
complete the setup
11
Tap to open the Menu Tap > CREATE NEW NETWORK Follow app instructions to complete the setup
Create New Networks
On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one
account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:
from the Overview page or the Menu page.
Method 2. Create a new network from the Menu page
12
Wi-Fi Detective
Wi-Fi Detective helps you discover all devices connected to the current Deco Wi-Fi network and identify potential risks.
In the OverView page, tap to
open the Menu
Tap to find all devices connected
to the current Wi-Fi network
Tap Wi-Fi Detective
13
Remove/Reboot Deco
You can remove or reboot your Deco easily on the Deco app. Follow the steps below.
Tap to remove or reboot the Deco
Note: If the LED light of Deco does not turn pulsing
blue after tapping Remove, refer to Appearance to
use the reset button to reset it.
Tap to check all Deco's status Tap a Deco unit to enter the details
14
HomeShield
Whether protecting your network from malicious attacks, managing your family's online activities, or prioritizing devices to get better performance,
TP-Link HomeShield provides you a kit of basic (free) and Pro (charged) features to enhance your whole home network with enhanced security.
An overview of HomeShield features are shown below.
• What is HomeShield: tp-link.com/homeshield
• How to use HomeShield features and upgrade to HomeShield Pro: go to the product support page at https://www.tp-link.com and refer to
TP-Link HomeShield User Guide.
Weekly/Monthly Reports: Review a weekly or a monthly list of usage, such as security threats, top visited contents, and
more, to better manage your family’s online activities.
HomeShield Pro subscription: To enjoy more features, you can upgrade to HomeShield Pro.
Scan: Examine your network regularly to identify the potential risks, thus improving your network performance and
security.
Real-Time Protection: Real-Time Protection is for Pro users only. There are three ways to ensure your home network
and your IoT devices remain safe: (1) block malicious websites, protect your home network and applications against
external attacks and eliminate vulnerabilities; (2) prevent infected devices from sending sensitive information or security
threats to clients outside your network; (3) identify IoT devices and immediately monitor their security performance
once they join the network.
Parental Controls: Create proles for family members and specify the devices that belong to each. Set individualized
parental controls including when and for how long each person can access the internet. Block inappropriate content
and pause the internet if necessary.
QoS: Prioritize the connection of a particular device for a set duration, such as a family member’s laptop for one hour
during a video call.
15
Wi-Fi Settings
You can change the network name and password of your main network, create a separate network for guests to guarantee the security and privacy of
your main network, and shake your device to share the network details easily with family and friends.
Manage your main network
(eg. change your Wi-Fi network
name and password)
Tap > Wi-Fi Enable guest network Shake to share your network
16
Blacklist
Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the
network.
Tap > Blacklist Add clients to blacklist Add other devices to blacklist Manage blacklist
17
Online Update
TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more
stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app.
Tap > Update Deco Follow app instructions to update your Deco to the
latest version
Tip: If the rmware update fails, please reboot the main Deco, move
the Satellite Deco closer to the main Deco, then try to update again.
18
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), add IPv6 rewall rules, modify LAN IP, set up
DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a specic device, set up port forwarding rules to make your local
computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change
the working mode, and congure the notication settings.
Tap > Advanced View IPv4 details or change the
internet connection type
Enable IPv6 to set up an IPv6
internet connection
Add IPv6 rewall rules to allow
specic devices to access the
specied services
20
Reserve IP addresses for specic
devices to recognize and manage
the device more easily
Set up port forwarding rules to
enable devices in your network
accessible over the internet with
safety
Register a TP-Link DDNS domain
name to access your router and
local servers using a domain name
Enable SIP ALG to communicate
with SIP (Session Initiation Protocol)
servers via NAT
21
Enable UPNP to allow your local
network to dynamically open ports
for applications like gaming
Enable Fast Roaming to allow
your wireless devices to switch
connection to dierent Decos
seamlessly
Enable Beamforming to
concentrate Wi-Fi signal towards
connected devices for stronger
connections
Toggle o LED to turn o the light on
Deco. Congure the Night Mode to
turn o the LED light at bedtime only
22
Change the operating mode
Note: When the Deco works in Access Point
mode, advanced features such as HomeShield,
IPv4, Address Reservation, Port Forwarding, and
DHCP server are not available.
Set connection alerts to receive
notications once the clients connect
to or disconnect from Deco
Set notications to receive alerts in
the notication bar
Note: If the Notications option shows “Disabled”,
go to Settings > Notications on your mobile device
to enable it.
23
WPS
WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to a network with a tap without entering any password.
Tap > WPS Tap the WPS icon on Deco app and then on
your client
Your device connects to the network
successfully if shown as below
24
Weekly/Monthly Reports
Review the weekly or monthly usage reports, such as security threats and total connected network devices each day.
Tap > Reports View weekly / monthly reports Tap to enable or disable reports
25
Managers
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.
Tap > Managers Remove managersSet privileges for managersAdd other accounts as managers
26
FAQ
Solutions to common problems during setup or use are provided here for reference. Follow the steps in the provided link to solve your problem.
If problems still exist, contact us: https://www.tp-link.com/support
Q1. What should I do if I fail to congure the main Deco and get stuck on “We couldn't nd Deco”?
Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM
Q2. What should I do if I fail to congure the satellite Deco and get stuck on “We couldn't nd another Deco”?
Refer to the guide https://www.tp-link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4
Q3. What should I do if I fail to congure the main Deco and get stuck on “Testing Internet Connection”?
Refer to the video https://youtu.be/OSUrGdWH-i0
Q4. What should I do if my wireless devices cannot connect to Deco?
Refer to the guide https://www.tp-link.com/support/faq/2718/
Q5. What should I do if Deco suddenly lost internet access?
Refer to the guide https://www.tp-link.com/support/faq/1454/
Q6. How can I nd a suitable spot for my Deco?
Refer to the guide https://www.tp-link.com//support/faq/1446/
Q7. What can I do if the Deco app isn't working properly?
Refer to the guide https://www.tp-link.com/support/faq/1456/
27
Authentication
FCC Compliance Information Statement
Product Name: AX3600 Whole Home Mesh Wi-Fi 6 System
Model Number: Deco X68
Component Name Model
I.T.E POWER SUPPLY T120250-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
28
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
Issue Date: 2020-11-26
FCC Compliance Information Statement
Product Name: I.T.E POWER SUPPLY
Model Number: T120250-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
29
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2020-11-26
30
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
Caution:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile
satellite systems.
Avertissement:
Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
31
Korea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice & BSMI Notice:
注意！
依據 低功率電波輻射性電機管理辦法
LP0002低功率射頻器材技術規範_章節3.8.2
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
5.7.9.1應避免影響附近雷達系統之操作。
安全諮詢及注意事項
• 請按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。
限用物質含有情況標示聲明書
設備名稱：
Equipment name
AX3600 Whole Home Mesh Wi-Fi 6 System
型號（型式）：
Type designation (Type)
Deco X68
32
單元
Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
PCB ○ ○ ○ ○ ○ ○
外殼 ○ ○ ○ ○ ○ ○
電源供應器 −○ ○ ○ ○ ○
其他及其配件 −○ ○ ○ ○ ○
備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance
exceeds the reference percentage value of presence condition.
備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference
value of presence.
備考3.“ − ”系指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,
що передбачені чинними законодавчими актами України.
Safety Information
33
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Symbol Explanation
DC voltage
Class II equipment
Caution
Operator’s manual
Polarity of output terminals
Energy efficiency Marking
Indoor use only
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means
that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to
minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new
electrical or electronic equipment.