Table of Contents
Vaddio EasyTALK USB User Manual
Displayed below is the user manual for EasyTALK USB by Vaddio which is a product in the Audio Conferencing Systems category. This manual has pages.
Related Manuals
Complete Manual for
CeilingMIC
Conference Room Microphones
Document 411-0033-30 Rev C
February 2019
ii
Contents
About this Manual 1
Products Covered 1
Product Compatibility 1
What's in the Box 2
A Quick Look at the CeilingMIC 2
Installation 3
Preparing for a Successful Audio Installation 3
Tools You Will Need 3
Safety Information 3
Don’t Void Your Warranty! 4
Cabling Notes 4
Installing the CeilingMIC 5
Preparing the Ceiling Box 5
Preparing the Ceiling 5
Working Above the Ceiling 6
Working Below the Ceiling 6
Basic Connections 7
Operation 8
Specifications 9
Troubleshooting 10
Use, Storage, and Care 10
Compliance Statements and Declarations of Conformity 11
FCC Part 15 Compliance 11
ICES-003 Compliance 11
European Compliance 12
Warranty and Return Policy 13
1
About this Manual
Information in this manual includes:
nUnpacking and installation
nOperation
nUpdating firmware
nSpecifications
nTroubleshooting
nWarranty and compliance/conformity information
Products Covered
This manual covers:
CeilingMIC Conference Room Microphone (worldwide) – 999-85100-000 (white); 999-85150-000 (black)
The CeilingMIC System is a component of the following conferencing product bundles:
nEasyTALK USB Audio Bundle – 999-86400-000 (North America); 999-86400-001 (Europe/UK); 999-
86400-009 (Australia/New Zealand)
nEasyUSB MicPod I/O with two CeilingMICs – 999-88000-000 (North America); 999-88000-001
(Europe/UK)
nEasyUSB MicPod I/O with four CeilingMICs – 999-88100-000 (North America); 999-88100-001
(Europe/UK)
nConferenceSHOT AV System with one CeilingMIC, white – 999-99950-100W (North America); 999-
99950-101W (Europe/UK); 999-99950-109W (Australia/New Zealand)
nConferenceSHOT AV System with one CeilingMIC, black – 999-99950-100 (North America); 999-
99950-101 (Europe/UK); 999-99950-109 (Australia/New Zealand)
nConferenceSHOT AV System with two CeilingMICs, white – 999-99950-200W (North America); 999-
99950-201W (Europe/UK); 999-99950-209W (Australia/New Zealand)
nConferenceSHOT AV System with two CeilingMICs, black – 999-99950-200 (North America); 999-
99950-201 (Europe/UK); 999-99950-209 (Australia/New Zealand)
nConferenceSHOT AV Camera (no speaker) with one CeilingMIC, white – 999-99950-800W (North
America); 999-99950-801W (Europe/UK); 999-99950-809W (Australia/New Zealand)
nConferenceSHOT AV Camera (no speaker) with oneCeilingMIC, black – 999-99950-800 (North
America); 999-99950-801 (Europe/UK); 999-99950-809 (Australia/New Zealand)
nConferenceSHOT AV Camera (no speaker) with two CeilingMICs, white – 999-99950-700W (North
America); 999-99950-701W (Europe/UK); 999-99950-709W (Australia/New Zealand)
nConferenceSHOT AV Camera (no speaker) with two CeilingMICs, black – 999-99950-700 (North
America); 999-99950-701 (Europe/UK); 999-99950-709 (Australia/New Zealand)
Product Compatibility
The CeilingMIC conference room microphone maintains compatibility with Vaddio's products with
EasyMIC connectivity:
nEasyUSB MicPOD I/O – Provides an interface to a professional conferencing mixer; connect up to four
microphones.
nEasyUSB Mixer/Amp – Enables you to use one microphone or two with with a PC as a USB audio
device.
nConferenceSHOT AV – Native support for the CeilingMIC in a small to medium conference room;
connect one microphone or two.
nAV Bridge MATRIX PRO – Native support for the CeilingMIC in a medium-size conference room;
connect up to four microphones.
What's in the Box
Make sure you received all the items you expected.
CeilingMIC System (worldwide) – 999-85100-000 (white); 999-85150-000 (black)
nIn-ceiling interface box
nMicrophone body and strain-relief boot (white or black)
nTile brace
nTrim plates, qty. 2, with mounting hardware (white or black)
nDrop-down cable (white or black)
nSmall zip-tie
nStrain relief clamp
nSplit grommet
Contact Vaddio Technical Support if you did not receive all the items listed.
A Quick Look at the CeilingMIC
Interface box
nProvides AEC reference from far end and applies it to each microphone
element individually
nNew design emphasizes simplicity and ease of connection
nUp to 100 ft. cable distance from the interface box to the connected device
Trim plates
nWhite or black, to match the microphone body
nTwo-piece design can be installed after the rest of the installation is
complete
Drop-down cable
nMatches the trim ring and microphone body
nUp to 15 ft. (4.6 m) drop-down cable length supported
Strain relief boot
nSecurely grips the drop cable to prevent tension at the connector
nSplit design and flexible material for easy installation
nAccomodates standard category cable; installers can build cable to length
nClean lines for visual appeal
Microphone body
nThree-element design with improved geometry for 360° coverage with better audio pick-up
nEach microphone element features integrated echo cancellation and Digital Signal Processing (DSP),
including equalization, filtering and automatic gain control (AGC)
nEasy access to the cable connector in the microphone
nNew cloth-wrapped design
Note
Contact Vaddio Technical Support if your installation requires a drop-down cable longer than 15 ft. (4.6 m).
2
Complete Manual for CeilingMIC Conference Room Microphones
Installation
This section covers:
nTips for a successful audio installation
nSafety information
nTools you will need
nCabling notes
nInstalling the CeilingMIC
nConnection diagrams
Preparing for a Successful Audio Installation
Here are a few tips for avoiding common audio problems.
nThe effective range for each Vaddio conference room microphone is about 12 ft. (3.7 m) under most
circumstances. Be sure the room design includes enough microphones to provide adequate coverage.
nBecause of the microphone geometry, sensitivity is somewhat reduced in a small area directly below
the CeilingMIC. In a small to medium corporate conference room, it may make sense to suspend the
CeilingMIC(s) above the centerline of the conference table.
nTo prevent audio feedback, keep microphones at least 4 ft. (1.2 m) from speakers. More separation is
better.
nAlways place microphones closer to the people talking than to the speakers. This helps maintain quality
echo cancellation.
nDo not route CeilingMIC cables across or beside fluorescent light fixtures; electrical interference from
the ballasts may degrade the audio signal.
nMount the CeilingMIC away from air vents; they can pick up the sounds of the HVAC system.
nDo not let cats play with CeilingMIC conference room microphones. (OK, that's not actually a common
problem.)
Tools You Will Need
To install the CeilingMIC, you will need:
nHole saw for the appropriate type of ceiling
n#2 Phillips screwdriver
nWire cutters
nTape measure
nLadder or lift
nAppropriate personal protective equipment
Safety Information
Installing the CeilingMIC requires the use of a ladder or lift.
Warning
Follow standard safety practices when using ladders or lifts. Failure to do so can result in injury or
death.
Note
All above-ceiling work must conform to local building codes and should be performed by qualified
personnel.
3
Complete Manual for CeilingMIC Conference Room Microphones
Don’t Void Your Warranty!
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
Cabling Notes
Caution
Do not use pass-through RJ-45 connectors. If they are crimped incorrectly, they can damage
the connectors on the product, cause intermittent connections, and degrade signal quality.
Physical damage to the connectors may void your warranty.
Intact – will make reliable contact
with cable connector
Damaged – Bent contact fingers
will NOT make reliable contact
with cable connector
Use Cat-5e or better cable. We recommend using high-quality connectors and a high-quality crimping tool.
We recommend shielded cabling if the cables will be coiled, run tightly with other cables, or placed close
sources of electromagnetic interference such as power lines.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
Pro Tip
Label all cables at both ends.
4
Complete Manual for CeilingMIC Conference Room Microphones
Installing the CeilingMIC
Warning
Follow standard safety practices when using ladders or lifts. Failure to do so can result in injury or death.
We like you, we don't want you to be injured or killed, and we hope you understand the gravity of the
situation.
Preparing the Ceiling Box
1. Remove the cover from the ceiling box.
2. Determine the desired length of the drop cable, from the ceiling to the top of the microphone body (not
the top of the strain relief boot). Be sure this leaves enough cable inside the ceiling box to avoid placing
tension on the connector.
Note
If desired, you can use a Cat-5 cable made to the desired length for the microphone drop-down cable.
The cable may be up to 15 ft. (4.6 m); contact Vaddio Technical Support if your installation requires a
longer drop cable.
3. Thread the drop cable through the opening in the floor of the box.
4. Snap the strain relief grommet onto the drop cable at the desired cable length, and
press it into the opening in the floor of the box.
5. Connect the drop cable to the port labeled IN FROM MIC.
6. If there is excess cable above the grommet, thread a zip tie through the tie loop in
the side of the box and secure the cable.
Preparing the Ceiling
If installing in a hard ceiling:
Using the tile brace as a template, make a hole in the ceiling where the microphone will
be mounted.
If installing in a suspended tile ceiling:
1. Remove the ceiling tile where the microphone will be mounted, and make a hole in the ceiling tile using
the tile brace as a template.
2. Reinstall the ceiling tile and position the tile brace.
Note
Because the CeilingMIC assembly weighs very little, the tile brace does not need to be physically
attached to the tile support grid unless this is required by local building codes.
5
Complete Manual for CeilingMIC Conference Room Microphones
Working Above the Ceiling
1. Route a Cat-5e (or better) cable from the ceiling box to the mixer or other audio device. The cable may
be up to 100 ft. (30 m.) long.
2. Thread the cable through the opening in the side of the ceiling box.
3. Install the split grommet in the opening in the side of the ceiling box to keep the cable from chafing.
4. Connect the cable to the port labeled OUT TO MIXER.
5. Reinstall the cover on the ceiling box.
6. Thread the drop cable through the opening in the ceiling and place the ceiling box flat.
Working Below the Ceiling
1. Connect the drop cable to the port in the microphone body.
2. Fit the strain relief boot over the drop cable.
3. Fit the strain relief boot into place in the microphone body.
4. Slide both the slotted trim plates over the cable, making sure the countersinks face outward, and turn
them so the slots are on opposite sides. Use the 3/4 inch flat head screws to secure the trim plates to
the threaded posts on the bottom of the interface box.
(Illustration shaded for clarity)
Contact Vaddio Technical Support if you have questions or encounter any problems. Phone 800.572.2011 /
+1.763.971.4400, email av.vaddio.support@legrand.com.
6
Complete Manual for CeilingMIC Conference Room Microphones
Basic Connections
This is a simple installation for a small conference room, using the CeilingMIC with a ConferenceSHOT AV
system. In this installation, the CeilingMIC connects to a ConferenceSHOT AV camera with speaker. The
camera connects to a computer over a USB 3 connection, making audio and video available to soft
conferencing applications.
7
Complete Manual for CeilingMIC Conference Room Microphones
This installation is for a larger room, using an AV Bridge MATRIX PRO to manage the room audio and
video. The four CeilingMIC microphones connect directly to EasyMIC ports on the AV Bridge MATRIX
PRO. The speaker(s) require an amplifier, as shown by the amplifier symbol in the diagram. This system
can include multiple cameras.
Operation
When a compatible Vaddio device is updated with firmware that supports the CeilingMIC, the device's web
interface provides controls for adjusting the microphone's performance.
You can download the latest firmware updates from the product pages on our website, vaddio.com.
8
Complete Manual for CeilingMIC Conference Room Microphones
Specifications
Performance
Frequency Response 100 Hz to 16 KHz
THD + Noise < 0.02%
Dynamic Range > 90 dB
Environmental and Physical
Operating/Storage Temperature 32°F to 104°F (0°C to 40°C)
Operating/Storage Humidity 10% to 80% (non-condensing)
Maximum Cabling Distance Drop cable: 15 ft (4.6 m)
Interface box to host device: 100 ft (30
m)
Interface Box Dimensions Length including flange: 10.25 in (26
cm)
Width: 4.6 in (11.7 cm)
Height: 2 in. (5.1 cm)
Microphone body dimensions 2.5 in. (6.3 cm) diameter
Installed Weight 2 lbs (0.9 kg)
9
Complete Manual for CeilingMIC Conference Room Microphones
Troubleshooting
What is it doing? Possible causes Check and correct
Nothing. Connected devices do
not recognize the microphone.
The cable from the ceiling box
to the AV or conferencing
device is not connected, or is
bad.
Verify that the cable is connected to the
device.
The drop cable is not fully
seated at one end, or is bad.
Check the cable for correct pin-out and
continuity.
Participants at the far end
report no audio.
The microphone is muted. If the indicator light on the CeilingMIC
is on, it is muted. Unmute it from the
device that controls it.
Participants at the far end
report that the audio does not
sound natural.
The audio has not been
adjusted properly for the room.
Adjust the microphone from the device
that controls it.
Use, Storage, and Care
Keep this device away from food and liquids.
Do not operate or store the device under any of the following conditions:
nTemperatures above 40°C (104°F) or below 0°C (32°F)
nHigh humidity, condensing or wet environments
nInclement weather
nSevere vibration
nGoing over Niagara Falls in a barrel
nDry environments with an excess of static discharge
Do not attempt to take this product apart. There are no user-serviceable components inside.
10
Complete Manual for CeilingMIC Conference Room Microphones
Compliance Statements and Declarations of Conformity
Compliance testing was performed to the following regulations:
FCC Part 15 (15.107, 15.109), Subpart B Class A
ICES-003, Issue 54: 2012 Class A
EMC Directive 2004/108/EC Class A
EN 55032: 2015 Class A
EN 55024: November 2010 Class A
KN22 2008 (CISPR 22: 2006) Class A
KN24 2008 (CISPR 24: 1997 + A1: 2000 + A2: 2002) Class A
IEC 60950-1:2005 (2nd Edition); Am 1: 2009 + Am 2: 2013 Safety
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 Safety
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference including interference that
may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission
compliance and could void the user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe A
préscrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada.
11
Complete Manual for CeilingMIC Conference Room Microphones
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions
and Immunity and meets the requirements for a Class A digital device. In a domestic environment this
product may cause radio interference in which case the user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive 2004/108/EC
EN 55022: December 2010 Conducted and Radiated Emissions
EN 55024: November 2010 Immunity
EN 61000-4-2: 1995 + Amendments A1: 1998 + A2: 2001 Electrostatic Discharge
EN 61000-4-3: 2006 + A1: 2008 Radiated Immunity
EN 61000-4-4: 2004 + Corrigendum 2006 Electrical Fast Transients
EN 61000-4-5: 2006 Surge Immunity
EN 61000-4-6: 2009 Conducted Immunity
EN 61000-4-8: 2010 Power Frequency Magnetic Field
EN 61000-4-11: 2004 Voltage Dips, Interrupts and
Fluctuations
KN22 2008 (CISPR 22: 2006) Conducted and Radiated Emissions
KN24 2008 (CISPR 24: 1997 + A1: 2000 + A2: 2002) IT Immunity Characteristics
EN 61000-4-2 Electrostatic Discharge
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 Electrical Fast Transients
EN 61000-4-5 Surge Immunity
EN 61000-4-6 Conducted Immunity
EN 61000-4-8 Power Frequency Magnetic Field
EN 61000-4-11 Voltage Dips, Interrupts and
Fluctuations
IEC 60950-1: 2005 (2nd Edition); Am 1: 2009 + Am 2: 2013 Safety
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2:
2013 Safety
12
Complete Manual for CeilingMIC Conference Room Microphones
Warranty and Return Policy
Hardware warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products.
Vaddio warrants its manufactured products against defects in materials and workmanship for a period of
two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects
during the warranty. Vaddio, at its option, will repair or replace products that prove to be defective. Vaddio
manufactures its hardware products from parts and components that are new or equivalent to new in
accordance with industry standard practices.
Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate
maintenance by the customer, customers applied software or interfacing, unauthorized modifications or
misuse, mishandling, operation outside the normal environmental specifications for the product, use of the
incorrect power supply, modified power supply or improper site operation and maintenance. OEM and
special order products manufactured by other companies are excluded and are covered by the
manufacturer’s warranty.
Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the
unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products.
The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to
repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility
for shipment after it has left the premises.
Vaddio Technical Support: Vaddio technicians will determine and discuss with the customer the criteria
for repair costs and/or replacement. Vaddio Technical Support can be contacted by email at
support@vaddio.com or by phone at one of the phone numbers listed on support.vaddio.com.
Return Material Authorization (RMA) number: Before returning a product for repair or replacement
request an RMA from Vaddio’s technical support. Provide the technician with a return phone number, e-
mail address, shipping address, product serial numbers and original purchase order number. Describe the
reason for repairs or returns as well as the date of purchase. See the General RMA Terms and Procedures
section for more information. RMAs are valid for 30 days and will be issued to Vaddio dealers only. End
users must return products through Vaddio dealers. Include the assigned RMA number in all
correspondence with Vaddio. Write the assigned RMA number clearly on the shipping label of the box when
returning the product. All products returned for credit are subject to a restocking charge without exception.
Special order products are not returnable.
Voided warranty: The warranty does not apply if the original serial number has been removed or if the
product has been disassembled or damaged through misuse, accident, modifications, use of incorrect
power supply, use of a modified power supply or unauthorized repair.
Shipping and handling: Vaddio will not pay for inbound shipping transportation or insurance charges or
accept any responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound
shipping, transportation, and insurance charges for all items under warranty but will not assume
responsibility for loss and/or damage by the outbound freight carrier. If the return shipment appears
damaged, retain the original boxes and packing material for inspection by the carrier. Contact your carrier
immediately.
Products not under warranty: Payment arrangements are required before outbound shipment for all out of
warranty products.
13
Complete Manual for CeilingMIC Conference Room Microphones
General RMA Terms and Procedures: RMA’s are valid for 30 days and will be issued to Vaddio dealers
only.
nEnd users must return products through Vaddio dealers.
nBefore a defective product can be authorized to send in for repair, it must first go through the
troubleshooting process with a member of the Vaddio Technical Support team.
nProducts authorized for repair must have a valid RMA (Return Material Authorization) number.
oVaddio RMA Team will issue the RMA number.
oAn RMA number is to be included in all correspondence with Vaddio.
oThe RMA number must appear clearly on the shipping label (not the box) when the product is
returned.
oA packing slip must be included on the inside of the box with the RMA number listed and reason for
RMA return.
nProducts received at Vaddio that do not have a valid RMA number clearly marked on the outside of the
shipping container may be refused and returned to sender.
nBoxes showing external damage will be refused and sent back to the sender regardless of the clearly
marked RMA number and will remain the responsibility of the sender.
RMA Charges (Restocking): All qualified returns must be made in unopened, original packaging with all
original materials.
nInitial shipments of equipment that are refused upon attempted delivery, for any reason, are subject to
restocking charges.
nThe Dealer has up to 60 days from the date of purchase to return Vaddio product for credit for future
purchases of Vaddio product only.
nThe Dealer has 61 to 90 days from the date of purchase to return Vaddio product with a 15% restocking
fee or $50.00 fee, whichever amount is greater
nThe Dealer has up to 30 days from the date of purchase to return OEM and other manufacturer’s
products with a 15% restocking fee or $50.00 fee, whichever amount is greater.
nNOTE: Special Order products from other manufacturers (identified in the Vaddio Price Guide as
noncancelable, nonreturnable and not refundable) are not eligible for advance replacement from Vaddio.
Advance Replacement Policies: For Vaddio manufactured products, advance replacement will be
provided for up to one (1) year after the initial shipment of products.
nNOTE: OEM and other manufacturer’s products are excluded from the Vaddio advance replacement
policy. Advance replacement will be provided for up to 30 days after initial shipment of OEM products.
Thereafter, a return to Vaddio and factory repair is offered during the other manufacturer’s warranty
period. Vaddio will determine if the returned product is qualified for the OEM warranty.
nNOTE: Special Order products from other manufacturers (identified in the Vaddio Price Guide as
noncancelable, nonreturnable and not refundable) are not eligible for advance replacement from Vaddio.
14
Complete Manual for CeilingMIC Conference Room Microphones
Advance Replacement Procedures: The Vaddio Dealer must submit a non-revocable purchase order for
advance replacement equipment at normal dealer pricing. Credit shall be issued upon complete product
return (including all accessories) for dealers with Net 30 terms. For credit card accounts, charges will be
assessed to the credit card for the replacement and credited back upon complete product return.
nReturns must be made in the original Vaddio packaging with all original materials if at all possible.
Vaddio products with missing original materials will be billed to the dealer at dealer price.
nNOTE: OEM products must be returned in the original packaging with all materials and the RMA
number written on the shipping label only and not on the OEM box. If the return is incomplete and/or the
OEM box is defaced, the product shall be returned to the dealer and the RMA will not be credited.
nEquipment returned with “No Trouble Found” after advanced replacement will be assessed a full 15% or
$50.00 restocking fee (whichever is greater) for each item and may also be assessed for additional
charges to compensate for wear, damages and reconditioning.
nAll returns must be accompanied by RMA # as stated above.
nAll Advanced Replacement products are sent via 2-day service in the continental USA. If the product is
requested to be sent via priority or overnight shipping, the Dealer shall pay shipping costs. The dealer
can elect to supply their preferred shipping account number.
nInternational customers are responsible for all freight charges for equipment returned to Vaddio,
including international shipping, taxes, and duties, insurance and all other associated logistic charges.
Warranty Repair Terms and Procedures: Vaddio will repair any product free of charge, including parts
and labor, within the terms outlined in the warranty agreement for that product.
nCustomers must provide proof of the product’s purchase date.
nProduct that is within the warranty period will be repaired under the non-warranty terms if:
oThe equipment has been damaged by negligence, accident, act of God, mishandling, used with the
incorrect, modified or extended power supply or has not been operated in accordance with the
procedures described in the operating and technical instructions.
oThe equipment has been altered or repaired by other than the Manufacturer or an authorized service
representative.
oAdaptations or accessories other than those manufactured or provided by the Manufacturer have
been made or attached to the equipment, which in the determination of the Manufacturer, shall have
affected the performance, safety of reliability of the equipment; or the equipment’s original serial
number has been modified or removed.
nCustomer is responsible for shipping charges to send defective product under warranty to Vaddio.
Vaddio will pay ground service return shipping charges during the 2nd year of the warranty period.
nStandard return shipping method for products under warranty, but out of the advance replacement
warranty period, is ground shipment. Extra charges associated with priority shipping, when requested,
will be the responsibility of the customer.
Non-Warranty Repair Terms: Vaddio will repair any non-obsolete product that does not meet the terms of
the warranty. Non-warranty repair terms are as follows:
nThe customer is responsible for, and agrees to pay, all parts and labor costs associated with the repair.
Standard non-warranty repair charges are outlined below.
nCustomers must provide payment method and one of the following, prior to receiving an RMA:
oHard copy of a PO, for dealers with Net 30 terms and in good standing with Vaddio.
oValid credit card number - Credit card will be charged upon shipping repaired product back to
customer.
nRequest for COD: Customers will be notified of COD charges prior to shipping repaired unit.
nCustomer is responsible for all shipping charges both to and from Vaddio, and may use their own
carrier.
nCustomers will receive a courtesy call notifying them of total repair charges prior to return shipping.
15
Complete Manual for CeilingMIC Conference Room Microphones
Non-Warranty Repair Charges: Total repair charges (per unit) for a non-warranty repair consist of the
following:
nCost of any replacement parts needed to repair the defect.
nLabor costs billed per hour after minimum charges/time.
nLabor charges include troubleshooting and repair time only.
nBurn-in time and final test time is not included in the labor charges.
nLabor time is rounded to the nearest quarter hour.
nLabor charges are billed at the prevailing rate for the category of equipment repaired, after minimum
charges/time. For prevailing labor rates, please contact the Vaddio technical support.
nAll shipping and handling costs are the responsibility of the customer for non-warranty repairs.
Minimum Labor Charges: All non-warranty repairs are subject to a minimum evaluation/repair labor
charge even if there is no problem found. Please contact Vaddio technical support for the current applicable
rate.
Repair Charge Estimates: Estimates on repair charges for a specific problem will not be given before an
RMA is issued and the actual product has been evaluated by a Vaddio technician. Repair estimates will be
given after the repair department receives and evaluates the unit.
nCustomers requesting an estimate on repair charges must do so up front when they call in for an RMA.
The RMA team will call or email with the estimate after evaluating the unit and before proceeding with
the repair.
nAny product evaluated for a repair estimate is still subject to the minimum labor charges even if the
customer decides not to proceed with the repair.
nVaddio does not guarantee estimates given on repair charges. Actual repair costs may exceed the
estimate.
nCustomer is responsible for actual repair charges, regardless of estimate.
Repair Policy Notes:
nDuration of Repair: Products are repaired on a first come first serve basis. The turn-a-round time of a
particular repair is dependent upon circumstances such as product type, the nature of the problem and
current repair volumes. Requests for expedited repair service will be considered on a case-by-case
basis.
nRepair Warranty: Vaddio guarantees all of its repair work, performed on non-warranty items, for 90
days from the day the repaired product is shipped back to the customer. If the original problem
described was not resolved or reoccurs within the 90-day period, Vaddio will repair the unit free of labor
charges. However additional material charges may apply unless the parts used to affect the repair are
again deemed defective.
16
Complete Manual for CeilingMIC Conference Room Microphones
Vaddio is a brand of Legrand AV Inc.· www.legrandav.com · Phone 800.572.2011 / +1.763.971.4400 · Fax
+1.763.971.4464 · Email av.vaddio.support@legrand.com·
Visit us at support.vaddio.com for firmware updates, specifications, drawings, manuals, technical support
information, and more.
©2019 Legrand AV Inc.
Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for
identification purposes and are trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
Commercial AV Brands Chief | Da-Lite | Middle Atlantic | Projecta | Vaddio