Vertiv RTAFHD3-20 User Manual
Displayed below is the user manual for RTAFHD3-20 by Vertiv which is a product in the Industrial Environmental Sensors & Monitors category. This manual has pages.
Related Manuals
GEIST™ TEMPERATURE, AIRFLOW,
HUMIDITY AND DEW POINT SENSOR
Quick Installation Guide
VM1233/590-2257-501A 1
Part Number:
RTAFHD3
Description
The RTAFHD3 is a temperature,
airflow, humidity and dew point
sensor.
NOTE: This sensor can span a total
cable distance up to 600 ft from
the Geist environmental monitoring
device.
NOTE: The sensor must be
mounted perpendicular to the
airflow for e ective measurement.
Installation
1. Mount the sensor anywhere in
the data center with zip ties or
Velcro tape.
2. Plug the uplink cable into
sensor port (RJ12/ ) of the
Geist en vironmental monitoring
device or rack PDU.
Once connected, the Geist
environmental monitoring device
automatically detects and identifies
the sensor.
Temperature Accuracy Charts
Geist™ Temperature, Airflow, Humidity and Dew Point Sensor
To contact Vertiv Technical Support: visit www.VertivCo.com
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
2 VM1233/590-2257-501A