Vertiv SRT-12 User Manual
Displayed below is the user manual for SRT-12 by Vertiv which is a product in the Temperature & Humidity Sensors category. This manual has pages.
Related Manuals
GEIST™ TEMPERATURE SENSOR
Quick Installation Guide
VM1230/590-2250-501A 1
Part Number:
SRT 1.25/4/10
Description
The SRT sensor probe is used to
monitor temperature in critical
environments.
NOTE: The SRT sensor and cable
assembly can span a total cable
distance up to 600 ft from the
Geist environmental monitoring
device.
NOTE: Three sensor sizes are
available. The standard
temperature probe measures 1.25
inches (3.18 cm) in length. The
4-inch (10.16 cm) and 10-inch (25.4
cm) probe options are available for
customers wanting to submerge
these probes in water or glycol for
liquid temperature monitoring.
Installation
1. Mount the temperature sensor
anywhere in the data center
with zip ties or Velcro tape.
2. Plug the uplink cable into the
sensor port (RJ12/ ) of the
Geist environmental monitoring
device or rack PDU.
Once connected, the Geist
environmental monitoring device
automatically detects and identifies
the sensor.
1.25 inches
4 inches
10 inches
Typical Error Curve
GeistTM Temperature Sensors
To contact Vertiv Technical Support: visit www.VertivCo.com
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
2 VM1230/590-2250-501A