Vogel's PFW 6857 User Manual
Displayed below is the user manual for PFW 6857 by Vogel's which is a product in the TV Mounts category. This manual has pages.
Related Manuals
www.vogels.com
9531-060-Z02-01
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
www.vogels.com
Refer to
Step:
9531-060-Z02-01
31
1
M16 x 35mm
x1x4
Included components
Required for installation
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
14mm
1/4” / 6.5mm
M10 1/2”/13mm
x2
x6
5/16” x 3” 5/16” M6 x 12mm M8 x 10mm M5 x 6mm
x6 x2 x4 x1 x1
x1
2.5mm
5/32”
33
10
10
Stud Finder
Drill Template
Note: It is extremely important that this installation be
carried out by well qualified installation personal and the
mounting surface capable of supported the weight of the
display mount together through out the articulating range of
the PFW6857 series mount.
www.vogels.com
9531-060-Z02-01
1
3
2
4
6A
5
4
3
x1
x1
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
2 3
1/2”/13mm
1/4” / 6.5mm
4 5
With minimum two people place the PFW6857 wall plate
assembly and secure to the wall using the top center hole of
the wall plate.
With a spirit level place on top of the wall plate level the
mounts than secure the remaining bolts through the wall
plate to the wall.
Take the mounting template supplied insure the template
is centered and level at the desired height on the mounting
surface. Mark the mounting hole (six recommended) three
on top and three on bottom.
Note: drill mounting pilot holes to a proper depth to insure
the lag or wedge anchor bolts are fully engaged into the
hole.
www.vogels.com
9531-060-Z02-01
1
3
2
4
98
7
6B
Make sure to keep space between
the bracket and display.
x4 x4 x4
M8 x 16 mm M8 x 20 mm M8 x 30 mm
or or
x4
x4
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
1/2”/13mm
7
8 9
5/32”
Remove the two security screws from the right and left side
of the mounting bracket crossbar and slide the two mounting
brackets inside the left and right side security screw hole
and reinstall the two security screws.
Remove the two security screws from the right and left side
of the mounting bracket crossbar and slide the two mounting
brackets inside the left and right side security screw hole
and reinstall the two security screws.
www.vogels.com
9531-060-Z02-01
1
3
2
4
12
11B
11A
10
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
5/32”
C
L
Remove the 6mm knurl knob safety screw and set it aside.
Once the mounting brackets are secured to the rear of the
display alighn the round portion of the cross bar so it is on
dead center of the display from left to right side.
Secure the cross bar to the bracket using the four Allen
head screws suppliedv
Invert the flat panel display and place it on a smooth flat
surface so the back of the display panel is facing up.
Align the two mounting bracket to the four mounting points
on the rear of the display and secure them bracket to the
display with the proper “pitch” supplied hardware. Check the
owners manual to determine correct pitch hardware recom-
mended.
x4
www.vogels.com
9531-060-Z02-01
1
3
2
4
1615
14
13 With the cross bar fully seating into the receiver
reinstall the 6mm safety knurl knob.
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
Power and signal cables may be conveniently run through
the arms of the mount between the display and the power
and signal source to assist in the clean look of the cable
installed.
Note: Once cables have been installed carefully check the
movement of the mount and cables together to insure their is
no “pinching of the cables” when the mount is articulated.
Once all mounting points and level of the display have been
confirmed, remove the plastic covers to route cable from the
wall to the display.
Note: appropriate number of personal and possible installa-
tion lift aids lift and insert the round portion of the crossbar
with display attached and safely insert the round portion of
the cross bar into the open round receiver portion on the
wall mount.
www.vogels.com
9531-060-Z02-01
1
3
2
19
18
17
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857
M2.5
M10
The PFW6857 has a unique “load offset adjustment” feature
that allow for the heavier weight displays to be tilt corrected
past base center back to level from top to bottom. With
personal lifting gently “out “ on the bottom of the display a
9/16” (14mm) socket may be used to increase or decrease
the tilt feature of the mount.
The two side mounted screws in the receiver head of the
mount can be adjusted to add or subtract tension in the rota-
tion of the display in the mount.
With the 2.5mm Allen head wrench supplied, install the two
each M5 x 6mm mini adjustment Allen head screws supplied
to both sides of the “rotation” stop bar. Slowly turn the display
to the level position in each direction and adjust the two adjust
screw to set max rotation in each direction to level.
M5 x 6 mm
x2
=14mm wrench socket
www.vogels.com
9531-060-Z02-01
6
3
4
2
5
14
1
3
2
6
5
3
2
1
6
4
5
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
3106-000-036-XX
MOUNTING BRACKET WELD ASSEMBLY
(ELLIPTICAL)
2
2
6095-PSD-E-E
PLASTIC CAP (ELLIPTICAL TUBE 3.149 X
1.574 )
2
3
3106-000-034-XX
SWIVEL TUBE ASSEMBLY
1
4
0474-061-104-6X
SCREW PAN PHILLIPS COMB (M6X1.0 X 12)
2
5
1658-079-091-6X
SET SCREW CUP POINT ( M8 X 1.25 X 10 )
4
6
1658-052-061-6X
SET SCREW CUP POINT ( M5 X 0.8 X 6 )
2
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
3106-000-037-XX
MOUNTING BRACKET ASSEMBLY LARGE
(ELLIPTICAL)
2
2
3106-000-035-XX
SWIVEL TUBE ASSEMBLY (LARGE)
1
3
6095-PSD-E-E
PLASTIC CAP (ELLIPTICAL TUBE 3.149 X
1.574 )
2
4
0474-061-104-6X
SCREW PAN PHILLIPS COMB (M6X1.0 X 12)
2
5
1658-079-091-6X
SET SCREW CUP POINT ( M8 X 1.25 X 10 )
4
6
1658-052-061-6X
SET SCREW CUP POINT ( M5 X 0.8 X 6 )
2
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
3106-000-035-XX
SWIVEL TUBE ASSEMBLY (LARGE)
1
2
6095-PSD-E-E
PLASTIC CAP (ELLIPTICAL TUBE 3.149 X 1.574 )
2
3
0474-061-104-6X
SCREW PAN PHILLIPS COMB (M6X1.0 X 12)
2
4
3106-000-038-XX
MOUNTING BRACKET ASSEMBLY XLARGE (ELLIPTICAL)
2
5
1658-079-091-6X
SET SCREW CUP POINT ( M8 X 1.25 X 10 )
4
6
1658-052-061-6X
SET SCREW CUP POINT ( M5 X 0.8 X 6 )
2
9
1
5
108 6
17
19
16
2
7
13
11
415
21
20
22
14
18
3
12
ITEM NO.
QTY.
PART NO.
REV
DESCRIPTION
1 2
3106-000-032-XX
00
WALL BRACKET TUBE WELDED ASSEMBLY (ELLIPTICAL)
2 2
3106-000-031-XX
01
DOUBLE ARM TUBE WELDED ASSEMBLY
3 2
3106-000-033-XX
00 SHORT ARM WELDED ASSEMBLY (ELLIPTICAL)
4 2
2482-21-AM3
01
SHAFT .75 X 12" LONG
5 2
2482-22-AM3
01
SHAFT .75 X 20" LONG
6 26
2482-23-AM3
00
COVER,OBLONG HOLE COVER (PLASTIC)
7 10
0700-205-226-XX
00
TUBE/PIPE END CAP COVER 1.181 X 1.375 X .616
8 8
6095-PSD-E-E
00
PLASTIC CAP (ELLIPTICAL TUBE 3.149 X 1.574 )
9 12
0477-087-147-6X
HEX FULLY THREADED 3/8"-16 x 3/4"
10 20
2482-36-AM3
01
BUSHING FLANGE DIE CAST .750 ID X 1.180 OD X 1.395 FLANGE .
11 10
204X-57A-L00-69
3/8" WASHER NON-STD (.405 ID) X (1.062 OD) X (.098 THK)
12 2
204X-578-502-10
3/8" WASHER NON-STD (.406 ID) X (.748 OD) X (.066 THK)
13 12
204X-86B-N00-28
WASHER DELRIN (.765 ID) X (1.400 OD) X (.020 THK)
14 1
3106-000-022-XX
03
ROTATIONAL MOUNT ASSEMBLY
15 2
3106-000-013-XX
00
SHAFT .75 X 6.67" LONG
16 10
2270-45A-E01-45
00
1" X .3 VINYL FEET
17 10
0548-061-077-6X
SCREW TRUSS HEAD COMBO PHILLIPS (M6X1.0X8)
18 2
3106-000-003-XX
00
INTERNAL ROTATION TUBE
19 8
1658-061-077-6X
SET SCREW CUP POINT ( M6 X 1.0 x 8 )
20 1
3106-000-024-XX
00
ROTATIONAL STOP
21 2
0422-061-104-6X
SCREW FLAT 90 DEGREES PHILLIPS (M6 x 1.0 x 12)
22 1
0562-061-077-6X
00
SCREW KNURL KNOB PHILLIPS (M6X1.0 X 8)
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW6857