Whirlpool AKZ9 6220 IX User Manual

Displayed below is the user manual for AKZ9 6220 IX by Whirlpool which is a product in the Ovens category. This manual has pages.

Related Manuals

Whirlpool ACM 712/IX Manual

Whirlpool AKR 968 IX Manual

Whirlpool AKR 810 IX Manual

Whirlpool AKR318/IX Manual

Whirlpool AKR312/IX Manual

Whirlpool AKR 310/IX Manual

PRODUCT DESCRIPTION

CONTROL PANEL

1. Control panel

2. Fan

3. Circular heating element

(not visible)

4. Shelf guides

(the level is indicated on the front

of the oven)

5. Door

6. Upper heating element/grill

7. Lamp

8. Meat probe insert point

(if present)

9. Identification plate

(do not remove)

10. Lower heating element

(not visible)

1. LEFTHAND DISPLAY

2. LIGHT

For switching the lamp on/off.

3. ON/OFF

For switching the oven on and off

and for stopping an active function

at any time.

4. BACK

For returning to the previous menu

when configuring settings.

5. ROTARY KNOB / 6TH SENSE

BUTTON

Turn this to navigate through the

functions and adjust all of the

cooking parameters. Press

to select, set, access or conﬁrm

functions or parameters and

eventually start the cooking

program.

6. TEMPERATURE

For setting the temperature.

7. T I M E

For setting or changing the time

and adjusting the cooking time.

8. START

For starting functions and

confirming settings.

9. RIGHTHAND DISPLAY

DAILY REFERENCE

GUIDE

Before using the appliance carefully read the Health and Safety guide.

THANK YOU FOR PURCHASING A

WHIRLPOOL PRODUCT

To receive more comprehensive help and

support, please register your product at

www.whirlpool.eu/register

WWW

You can download the Safety Instructions

and the Use and Care Guide by visiting our

website docs.whirlpool.eu and following

the instructions on the back of this booklet.

1 2 5 6 93 4 7 8

ACCESSORIES

WIRE SHELF DRIP TRAY BAKING TRAY SLIDING RUNNERS *

(ONLY IN SOME MODELS)

MEAT PROBE

(ONLY IN SOME MODELS)

The number of accessories may vary depending on which

model is purchased.

Other accessories can be purchased separately from the

After-sales Service.

INSERTING THE WIRE SHELF AND OTHER

ACCESSORIES

Insert the wire shelf horizontally by sliding it across

the shelf guides, making sure that the side with the

raised edge is facing upwards.

Other accessories, such as the drip tray and the

baking tray, are inserted horizontally in the same way

as the wire shelf.

FITTING THE SLIDING RUNNERS (IF PRESENT)

Remove the shelf guides from the oven and remove

the protective plastic from the sliding runners.

Fasten the upper clip of the

runner to the shelf guide

and slide it along as far as it

will go. Lower the other clip

into position.

To secure the guide, press

the lower portion of the

clip firmly against the shelf

guide. Make sure that the

runners can move freely.

Repeat these steps on the

other shelf guide on the

same level.

Please note: The sliding runners can be tted on any level.

REMOVING AND REFITTING THE SHELF GUIDES

. To remove the shelf guides, lift the guides up and

then gently pull the lower part out of its seating:

Theshelf guides can now be removed.

. To refit the shelf guides, first fit them back into

their upper seating. Keeping them held up, slide them

into the cooking compartment, then lower them into

position in the lower seating.

CONVENTIONAL

For cooking any kind of dish on one shelf only.

GRILL

For grilling steaks, kebabs and sausages,

cooking vegetables au gratin or toasting bread.

Whengrilling meat, we recommend using a drip tray

to collect the cooking juices: Position the tray on any

of the levels below the wire shelf and add 500 ml of

drinking water.

FORCED AIR

For cooking different foods that require the

same cooking temperature on several shelves

(maximum three) at the same time. This function

can be used to cook different foods without odours

being transferred from one food to another.

CONVECTION BAKE

For cooking meat, baking cakes with fillings

or roasting stuffed vegetables on one shelf only.

Thisfunction uses gentle, intermittent air circulation

to prevent food from drying out excessively.

6TH SENSE FUNCTIONS

CASSEROLE

This function automatically selects the best

temperature and cooking method for pasta dishes.

MEAT

This function automatically selects the

best temperature and cooking method for meat.

Thisfunction intermittently activates the fan at low

speed to prevent the food from drying out too much.

MAXI COOKING

The function automatically selects the best

cooking mode and temperature to cook large joints

of meat (above 2.5 kg). It is advisable to turn the

meat over during cooking, to obtain even browning

on both sides. It is best to baste the meat every now

and again to prevent it from drying out.

BREAD

This function automatically selects the best

temperature and cooking method for all types

ofbread.

PIZZA

This function automatically selects the best

temperature and cooking method for all types

ofpizza.

PASTRY CAKES

This function automatically selects the best

temperature and cooking method for all types

ofcake.

SPECIAL FUNCTIONS

FAST PREHEATING

For preheating the oven quickly. Once

preheating has finished, the oven will select the

“Conventional” function automatically. Wait for

preheating to finish before placing food in the oven.

TURBO GRILL

For roasting large joints of meat (legs, roast

beef, chicken). We recommend using a drip tray to

collect the cooking juices: Position the pan on any

of the levels below the wire shelf and add 500 ml of

drinking water. The turnspit (if provided) can be used

with this function.

ECO FORCED AIR*

For cooking stuffed roasting joints and fillets

of meat on a single shelf. Food is prevented from

drying out excessively by gentle, intermittent air

circulation. When this ECO function is in use, the

light will remain switched off during cooking.

Touse the ECO cycle and therefore optimise power

consumption, the oven door should not be opened

until the food is completely cooked.

KEEP WARM

For keeping just-cooked food hot and crisp.

RISING

For optimal proving of sweet or savoury

dough. To maintain the quality of proving, do not

activate the function if the oven is still hot following

a cooking cycle.

SMART CLEAN

ONLY IN SOME MODELS

The action of the steam released during this

special low-temperature cleaning cycle allows

dirt and food residues to be removed with ease.

Pour200ml of drinking water on the bottom of the

oven and only activate the function when the oven

is cold.

FUNCTIONS

* Function used as reference for the energy eciency

declaration in accordance with Regulation (EU) No. 65/2014

USING THE APPLIANCE FOR THE FIRST TIME

1. SELECT A FUNCTION

When the oven is off, only the time is shown on the

display. Press and hold to switch the oven on.

Turn the knob to view the main functions available on

the left-hand display. Select one and press .

To select a sub-function (where available), select the

main function and then press to confirm and go

to the function menu.

Turn the knob to view the sub-functions available

onthe right-hand display. Select one and press

toconfirm.

2. SET THE FUNCTION

After having selected the function you require, you

can change its settings.

The display will show the settings that can be

changed in sequence.

TEMPERATURE/GRILL LEVEL

When the °C/°F icon flashes on the display, turn

the knob to change the value, then press to

confirm and continue to alter the settings that

follow(ifpossible).

DAILY USE

1. SET THE TIME

You will need to set the time when you switch on the

oven for the first time.

The two digits for the hour will start flashing: Turn the

knob to set the hour and press to confirm.

The two digits for the minutes will start flashing. Turn

the knob to set the minutes and press to confirm.

Please note: To change the time at a later point, press and

hold for at least one second while the oven is o and

repeat the steps above.

You may need to set the time again following lengthy power

outages.

2. SETTINGS

If required, you can change the default unit of

measurement, temperature (°C) and rated current

(16A).

With the oven off, press and hold for at least

5seconds.

Turn the selection knob to select the unit of

measurement, then press to confirm.

Turn the selection knob to select the rated current,

then press to confirm.

Please note: The oven is programmed to consume a level of

electrical power that is compatible with a domestic network

that has a rating of more than 3 kW (16 A): If your household

uses a lower power, you will need to decrease this value

(13A).

3. HEAT THE OVEN

A new oven may release odours that have been left

behind during manufacturing: this is completely

normal.

Before starting to cook food, we therefore

recommend heating the oven with it empty in order

to remove any possible odours.

Remove any protective cardboard or transparent film

from the oven and remove any accessories from inside

it.

Heat the oven to 200 °C for around one hour, ideally

using a function with air circulation (e.g. “Forced Air”

or “Convection Bake”).

Follow the instructions for setting the function

correctly.

Please note: It is advisable to air the room after using the

appliance for the rst time.

You can also set the grill level (3 = high, 2 = medium,

1 = low) at the same time.

Please note: Once the function has started, you can change

the temperature or the grill level by pressing or by

turning the knob directly.

DURATION

When the icon flashes on the display, use the

adjustment knob to set the cooking time you require

and then press to confirm.

You do not have to set the cooking time if you want to

manage cooking manually: Press to confirm and

start the function.

In this case, you cannot set the end cooking time by

programming a delayed start.

Please note: You can adjust the cooking time that has been

set during cooking by pressing : Turn the knob to

change the hour and press to conrm.

SETTING THE END COOKING TIME/

DELAYED START

In many functions, once you have set a cooking time

you can delay starting the function by programming

its end time.

Where you can change the end time, the display will

show the time the function is expected to finish while

the icon flashes.

If necessary, turn the knob to set the time you want

cooking to end, then press to confirm and start

the function.

Place the food in the oven and close the door: The

function will start automatically after the period of

time that has been calculated in order for cooking to

finish at the time you have set.

Please note: Programming a delayed cooking start time will

disable the oven preheating phase. The oven will reach the

temperature you require gradually, meaning that cooking

times will be slightly longer than those listed in the cooking

table.

During the waiting time, you can use the knob to change the

programmed end time.

Press or to change the temperature and cooking

time settings. Press to conrm when nished.

3. ACTIVATE THE FUNCTION

Once you have applied the settings you require, press

to activate the function.

You can press and hold at any time to pause the

function that is currently active.

4. PREHEATING

Some functions have an oven preheating phase: Once

the function has started, the display indicates that the

preheating phase has been activated.

Once this phase has finished, an audible signal will

sound and the display will indicate that the oven has

reached the set temperature.

At this point, open the door, place the food in the

oven, close the door and start cooking by pressing

Please note: Placing the food in the oven before preheating has

nished may have an adverse eect on the nal cooking result.

Opening the door during the preheating phase will pause it.

The cooking time does not include a preheating phase.

You can always change the temperature you want to reach

using the knob.

5. END OF COOKING

An audible signal will sound and the display will

indicate that cooking is complete.

To extend the cooking time without changing the

settings, turn the knob to set a new cooking time and

press .

. 6th SENSE FUNCTIONS

TEMPERATURE RECOVERY

If the temperature inside the oven decreases during a

cooking cycle because the door is opened, a special

function will be activated automatically to restore the

original temperature.

While the temperature is being restored, the

display will show a “snake” animation until the set

temperature has been reached.

While a programmed cooking cycle is in progress, the

cooking time will be increased according to how long

the door was open in order to guarantee best results.

. SPECIAL FUNCTIONS

SMART CLEAN

To activate the “Smart Clean” function, with the oven

cold, distribute 200 ml of water on the bottom of the

oven cavity, then close the oven door.

Access special functions and turn the knob to

select from menu. then press to confirm.

Press to start immediately the cleaning cycle, or

press to set the end time/start delayed.

At the end of the cycle, let the oven colling down

and remove any residual water in the oven and start

cleaning using a sponge moistened with hot water

(cleaning could be compromised if delayed by more

than 15 minutes).

Please note: The duration and temperature of cleaning cycle

cannot be set

. USING THE MEAT PROBE (IF PRESENT)

The meat probe supplied allows to measure the exact

internal temperature of food during cooking.

The meat probe is allowed only in some cooking

function (Conventional, Forced Air, Convention Bake,

Turbo Grill, 6th Sense Meat and 6th Sense

Maxicooking).

It is very important to position the

probe accurately in order to obtain

perfect cooking results. Insert the

probe fully into the fleshiest part of

the meat, avoiding bones and fatty

parts.

For poultry, the probe should be

inserted sideways, in the middle of

the breast, taking care to ensure the

tip does not end up in a hollow part.

In the case of meat with very

irregular thickness, check it is

cooked properly before removing it from the oven.

Connect the end of the probe in the hole located on

the right wall of the oven cavity.

Whenthemeatprobe is plugged to the oven cavity, a

buzzer sounds and the display shows icon and target

temperature.

If the meat probe is plugged during the selection of a

function, display switches to the default meat probe

target temperature.

Press to start settings. Turn the knob to set the

meat probe target temperature. Press to confirm.

Turn the knob to set oven cavity temperature.

Press or to confirm and start the cooking

cycle.

During cooking cycle, the display shows meat probe

target temperature. When the meat reaches the

target temperature set, the cooking cycle stops and

the display shows “End”.

To restart the cooking cycle from “End”, by turning

the knob it is possible to adjust meat probe target

temperature as indicated above. Press or to

confirm and restart the cooking cycle.

Please note: during cooking cycle with meat probe it

is possible turn the knob to change meat probe target

temperature. Press to adjust oven cavity temperature.

The meat probe can be inserted at any time, also during a

cooking cycle. In this case, it is necessary re-set the cooking

function parameters.

If meat probe is incompatible with a function, the oven

switch o the cooking cycle and plays an alert buzzer sound.

In this case, disconnect the meat probe or press to set

another function. Start delayed and preheat phase are not

compatible with meat probe.

. KEY LOCK

To lock the keypad, press and hold for at least 5

seconds.

Do this again to unlock the keypad.

Please note: The key lock can also be activated while cooking

is in progress.

For safety reasons, the oven can be switched o at any time

by pressing .

HOW TO READ THE COOKING TABLE

The table lists the best function, accessories and level

to use to cook different types of food. Cookingtimes

start from the moment food is placed in the oven,

excluding preheating (where required). Cooking

temperatures and times are approximate and depend

on the amount of food and the type of accessory

used. Use the lowest recommended settings to begin

with and, if the food is not cooked enough, then

switch to higher settings. Use the accessories supplied

and preferably dark-coloured metal cake tins and

baking trays. You can also use Pyrex or stoneware

pans and accessories, but bear in mind that cooking

times will be slightly longer.

COOKING DIFFERENT FOODS AT THE SAME TIME

Using the “Forced Air” function, you can cook

different foods which require the same cooking

temperature at the same time (for example: fish and

vegetables), using different shelves. Remove the

food which requires a shorter cooking time and leave

the food which requires a longer cooking time in

theoven.

MEAT

Use any kind of oven tray or pyrex dish suited to the

size of the piece of meat being cooked. For roast

joints, it is best to add some stock to the bottom of

the dish, basting the meat during cooking for added

flavour. Please note that steam will be generated

during this operation. When the roast is ready, let it

rest in the oven for another 10-15 minutes, or wrap it

in aluminium foil.

When you want to grill meat, choose cuts with an

even thickness all over in order to achieve uniform

cooking results. Very thick pieces of meat require

longer cooking times. To prevent the meat from

burning on the outside, lower the position of the

wire shelf, keeping the food farther away from the

grill. Turn the meat two thirds of the way through

cooking. Take care when opening the door as steam

will escape.

To collect the cooking juices, we recommend placing

a dripping pan filled with half a litre of drinking water

directly underneath the wire shelf on which the food

is placed. Top-up when necessary.

DESSERTS

Cook delicate desserts with the conventional function

on one shelf only.

Use dark-coloured metal baking pans and always

place them on the wire shelf supplied. To cook on

more than one shelf, select the forced air function and

stagger the position of the cake tins on the shelves,

aiding optimum circulation of the hot air.

To check whether a leavened cake is cooked, insert a

wooden toothpick into the centre of the cake. If the

toothpick comes out clean, the cake is ready.

If using non-stick baking pans, do not butter the

edges as the cake may not rise evenly around

theedges.

If the item “swells” during baking, use a lower

temperature next time and consider reducing the

amount of liquid you add or stirring the mixture

moregently.

For desserts with moist fillings or toppings (suchas

cheesecake or fruit tarts), use the “Convection

bake” function. If the base of the cake is soggy,

lower the shelf and sprinkle the bottom of the cake

with breadcrumbs or biscuit crumbs before adding

thefilling.

PIZZA

Lightly grease the trays to ensure the pizza has a

crispy base. Scatter the mozzarella over the pizza two

thirds of the way through cooking.

RISING

It is always best to cover the dough with a damp

cloth before placing it in the oven. Dough proving

time with this function is reduced by approximately

one third compared to proving at room temperature

(20-25°C). The rising time for pizza starts at around

one hour for 1 kg of dough.

USEFUL TIPS

COOKING TABLE

RECIPE FUNCTION PREHEAT. TEMPERATURE

(°C)

COOK TIME

(Min.)

LEVEL

AND ACCESSORIES

Leavened cakes / Sponge cakes

-170 30 - 50 2

Yes 160 30 - 50 2

Yes 160 30 - 50 41

Filled cakes

(cheesecake, strudel, apple pie)

-160 - 200 30 - 85 3

Yes 160 - 200 35 - 90 41

Cookies / Small cakes

-160 - 170 20 - 40 3

Yes 150 - 160 20 - 40 3

Yes 150 - 160 20 -40 41

Choux buns

-180 - 200 30 - 40 3

Yes 180 - 190 35 - 45 41

Yes 180 - 190 35 - 45* 53 1

Meringues

Yes 90 110 - 150 3

Yes 90 130 - 150 41

Yes 90 140 - 160* 53 1

Pizza (Thin, thick, focaccia)

-220 - 250 20 - 40 2

Yes 220 - 240 20 - 40 41

Yes 220 - 240 25 - 50* 53 1

Bread loaf 0,5 kg -180 - 220 50 - 70 2

Small bread -180 - 220 30 - 50 3

Bread Yes 180 - 220 30 - 60 41

Frozen pizza

-250 10 - 20 2

Yes 250 10 - 20 41

Savoury pies

(vegetable pie,quiche)

Yes 180 - 190 45 - 60 2

Yes 180 - 190 45 - 60 41

Yes 180 - 190 45 - 70* 53 1

Vols-au-vent / Pu pastry crackers

Yes 190 - 200 20 - 30 3

Yes 180 - 190 20 - 40 41

Yes 180 - 190 20 - 40* 53 1

Lasagne / Flans -190 - 200 40 - 65 3

Baked pasta / Cannelloni -190 - 200 25 - 45 3

RECIPE FUNCTION PREHEAT. TEMPERATURE

(°C)

COOK TIME

(Min.)

LEVEL

AND ACCESSORIES

Lamb / Veal / Beef / Pork 1 kg -190 - 200 60 - 90 3

Roast pork with crackling 2 kg -170 110 - 150 2

Chicken / Rabbit / Duck 1 kg -200 - 230 50 - 80 ** 3

Turkey / Goose 3 kg -190 - 200 90 - 150 2

Baked sh / en papillote

(llets, whole) Yes 180 - 200 40 - 60 3

Stued vegetables

(tomatoes, courgettes, aubergines) Yes 180 - 200 50 - 60 2

Toast -3 (High) 3 - 6 5

Fish llets / Steaks -2 (Mid) 20 - 30*** 43

Sausages / Kebabs / Spare ribs /

Hamburgers -2 - 3

(Mid - High) 15 - 30*** 54

Roast chicken 1-1,3 kg -2 (Mid) 55 - 70** 21

Roast beef rare 1 kg -2 (Mid) 35 - 50** 3

Leg of lamb / Shanks -2 (Mid) 60 - 90** 3

Roast potatoes -2 (Mid) 35 - 55** 3

Vegetable gratin -3 (High) 10 - 25 3

Complete meal: Fruit tart (level 5)/

lasagne (level 3)/meat (level 1) Yes 190 40 - 120* 53 1

Lasagna & Meat Yes 200 50 - 120* 41

Meat & Potatoes Yes 200 45 - 120* 41

Fish & Vegetebles Yes 180 30 - 50 41

Stued roasting joints -200 80 - 120* 3

Cuts of meat

(rabbit, chicken, lamb) -200 50 - 120* 3

* Estimated length of time: dishes can be removed from the oven at dierent times depending on personal preference.

** Turn food two thirds of the way through cooking (if necessary).

*** Turn food halfway through cooking.

Please note: 6th Sense “Pastry Cakes” function uses upper and lower heating elements only, without forced air circulation. It

doesn’t require preheating.

FUNCTIONS

Conventional Grill Turbo Grill Forced Air Convection Bake Eco Forced Air

AUTOMATIC

FUNCTIONS Casserole Meat Maxi Cooking Bread Pizza Pastry cakes

ACCESSORIES

Wire shelf Oven tray or cake tin on

wire shelf

Drip tray / Baking tray or

oven tray on wire shelf Drip tray / Baking tray Drip tray with 500 ml

ofwater

EXTERIOR SURFACES

• Clean the surfaces with a damp microfibre cloth.

If they are very dirty, add a few drops of pH-neutral

detergent. Finish off with a dry cloth.

• Do not use corrosive or abrasive detergents. If any of

these products inadvertently comes into contact with

the surfaces of the appliance, clean immediately with

a damp microfibre cloth.

INTERIOR SURFACES

• After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove any

deposits or stains caused by food residues To dry any

condensation that has formed as a result of cooking

foods with a high water content, let the oven to cool

completely and then wipe it with a cloth or sponge.

• Clean the glass in the door with a suitable liquid

detergent.

• Activate the “Smart Clean” function for optimum

cleaning of the internal surfaces (If present).

• The oven door can be removed to facilitate cleaning.

• The top heating element of the grill can be lowered

to clean the upper panel of the oven.

ACCESSORIES

Soak the accessories in a washing-up liquid solution

after use, handling them with oven gloves if they

are still hot. Food residues can be removed using a

washing-up brush or a sponge.

Make sure that the oven has

cooled down before carrying out

any maintenance or cleaning.

Do not use steam cleaners.

Do not use wire wool, abrasive

scourers or abrasive/corrosive

cleaning agents, as these could

damage the surfaces of the

appliance.

Wear protective gloves.

The oven must be disconnected

from the mains before carrying

out any kind of maintenance

work.

MAINTENANCE AND

CLEANING

REPLACING THE LIGHT

1. Disconnect the oven from the power supply.

2. Unscrew the cover from the light, replace the bulb

and screw the cover back on the light.

3. Reconnect the oven to the power supply.

Please note: Only use 25-40 W/230~V types E-14, T300°C

incandescent bulbs or 20-40 W/230~V type G9, T300°C

halogen bulbs. The bulb used in the product is specically

designed for domestic appliances and is not suitable for

general room lighting within the home (EC Regulation

244/2009). Light bulbs are available from our After-sales

Service.

- If using halogen bulbs, do not handle them with your bare

hands as your ngerprints could cause damage. Do not use

the oven until the light cover has been retted.

CLEANING THE CATALYTIC PANELS

ONLY IN SOME MODELS

This oven is equipped with special catalytic panels

that facilitate cleaning of the cooking compartment

thanks to their special self-cleaning coating, which is

highly porous and able to absorb grease and grime.

These panels are fitted to the shelf guides: When

repositioning and then refitting the shelf guides,

make sure that the hooks at the top are slotted into

the appropriate holes in the panels.

To make best use of the catalytic panels’ self-cleaning

properties, we recommend heating the oven to 200°C

for around one hour using the “Convection Bake”

function. The oven must be empty during this time.

Then leave the appliance to cool down before

removing any remaining food residues using a non-

abrasive sponge.

Please note: Using corrosive or abrasive cleaning agents,

sti brushes, pan scourers or oven sprays could damage the

catalytic surface and compromise its self-cleaning properties.

Please contact our After-sales Service if you require

replacement panels.

REMOVING AND REFITTING THE DOOR

1. To remove the door, open it fully and lower the

catches until they are in the unlock position.

2. Close the door as much as you can.

Take a firm hold of the door with both hands – do not

hold it by the handle.

Simply remove the door by continuing to close it

while pulling it upwards at the same time until it is

released from its seating. Put the door to one side,

resting it on a soft surface.

~15°

3. Refit the door by moving it towards the oven,

aligning the hooks of the hinges with their seating

and securing the upper part onto its seating.

4. Lower the door and then open it fully.

Lower the catches into their original position:

Makesure that you lower them down completely.

Apply gentle pressure to check that the catches are in

the correct position.

“CLICK”

5. Try closing the door and check to make sure that it

lines up with the control panel. If it does not, repeat

the steps above: The door could become damaged if

it does not work properly.

LOWER THE TOP HEATING ELEMENT

ONLY IN SOME MODELS

3. To reposition the heating element, lift it up, pulling

it slightly towards you, making sure it comes to rest

on the lateral supports.

1. Remove the lateral shelf guides.

2. Pull the heating element out a little and lower it.

Problem Possible cause Solution

The oven is not working. Power cut.

Disconnection from the

mains.

Check for the presence of mains electrical

power and whether the oven is connected to

the electricity supply.

Turn off the oven and restart it to see if the

fault persists.

The display shows the letter “F”

followed by a number or letter.

Software problem. Contact you nearest Client After-sales Service

Centre and state the number following the

letter “F”.

PRODUCT FICHE

WWW The product fiche with energy data of this

appliance can be downloaded from Whirlpool website

docs.whirlpool.eu

HOW TO OBTAIN THE USE AND CARE GUIDE

> WWW Download the Use and Care Guide

from our website docs.whirlpool.eu

(youcan use this QR Code), specifying the

product’s commercial code.

> Alternatively, contact our Client After-sales Service.

CONTACTING OUR AFTERSALES SERVICE

You can find our contact details in the warranty

manual. When

contacting our Client

After-sales Service,

please state the codes

provided on your

product’s identification

plate.

Model: xxxXXXXxx

XXXXXX XXXXXX XXXXX XXXXXXX

400011097902

Printed in Italy

TROUBLESHOOTING