Table of Contents
- WAH7706
- User’s Guide
- Technical Reference
- Home
- Internet
- Wi-Fi
- Router
- Applications
- System
- Troubleshooting
- Customer Support
- Common Services
- Legal Information
- Index
Zyxel WAH7706 v2 User Manual
Displayed below is the user manual for WAH7706 v2 by Zyxel which is a product in the Wireless Routers category. This manual has pages.
Related Manuals
Quick Start Guide
www.zyxel.com
WAH7706
LTE Portable Router
Version 1.00
Edition 1, 02/2016
Copyright © 2016 ZyXEL Communications Corporation
User’s Guide
Default Login Details
LAN IP Address http://192.168.1.1
User Name admin
Password 1234
WAH7706 User’s Guide
2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
Screenshots and graphics in this book may differ slightly from your product due to differences in
your product firmware or your computer operating system. Every effort has been made to ensure
that the information in this manual is accurate.
Related Documentation
•Quick Start Guide
The Quick Start Guide shows how to connect the WAH7706 and access the Web Configurator.
•More Information
Go to support.zyxel.com to find other information on the WAH7706.
Contents Overview
WAH7706 User’s Guide
3
Contents Overview
User’ s Guide ......................................................................................... ......................... .......................7
Introduction ...............................................................................................................................................8
The Web Configurator .............................................................................................................................12
Technical Reference ..........................................................................................................................19
Home .......................................................................................................................................................20
Internet ....................................................................................................................................................24
Wi-Fi ........................................................................................................................................................32
Router .....................................................................................................................................................51
Applications .............................................................................................................................................60
System ....................................................................................................................................................67
Troubleshooting ......................................................................................................................................77
Table of Contents
WAH7706 User’s Guide
4
Table of Contents
Contents Overview ..............................................................................................................................3
Table of Contents .................................................................................................................................4
Part I: User’s Guide ...........................................................................................7
Chapter 1
Introduction...........................................................................................................................................8
1.1 Overview ............................................................................................................................................8
1.2 Ways to Manage the WAH7706 ..........................................................................................................8
1.3 Good Habits for Managing the WAH7706 ...........................................................................................9
1.4 Hardware Connections ........................................................................................................................9
1.5 Turn on/off the WAH7706 ....................................................................................................................9
1.6 OLED Display and Icons .....................................................................................................................9
1.7 Resetting the WAH7706 .................................................................................................................... 11
1.7.1 How to Use the Physical Reset Button .................................................................................... 11
Chapter 2
The Web Configurator........................................................................................................................12
2.1 Overview ...........................................................................................................................................12
2.2 Login Accounts ..................................................................................................................................12
2.3 Access ...............................................................................................................................................12
2.4 Navigating the Web Configurator ......................................................................................................14
2.4.1 Title Bar ...................................................................................................................................15
2.4.2 Navigation Panel .....................................................................................................................15
Part II: Technical Reference............................................................................19
Chapter 3
Home....................................................................................................................................................20
3.1 Overview ...........................................................................................................................................20
3.2 Home .................................................................................................................................................20
3.3 Setup Wizard .....................................................................................................................................21
3.3.1 Internet ....................................................................................................................................21
3.3.2 Wi-Fi ........................................................................................................................................22
Table of Contents
WAH7706 User’s Guide
5
Chapter 4
Internet.................................................................................................................................................24
4.1 Overview ...........................................................................................................................................24
4.1.1 What You Can Do in this Chapter ............................................................................................24
4.2 Internet Status Screen .......................................................................................................................25
4.3 PIN Settings Screen ..........................................................................................................................26
4.4 APN Configuration Screen ................................................................................................................27
4.5 Network Selection Screen .................................................................................................................28
4.6 Data Usage/Statistic Screen .............................................................................................................29
Chapter 5
Wi-Fi.....................................................................................................................................................32
5.1 Overview ...........................................................................................................................................32
5.1.1 What You Can Do in this Chapter ............................................................................................32
5.1.2 What You Need to Know ..........................................................................................................33
5.2 Wi-Fi Status Screen ..........................................................................................................................33
5.3 Wi-Fi Settings Screen ......................................................................................................................34
5.4 MAC Filter Screen ............................................................................................................................37
5.5 WPS Screen ......................................................................................................................................38
5.6 Technical Reference ..........................................................................................................................39
5.6.1 Wireless Network Overview .....................................................................................................39
5.6.2 Additional Wireless Terms .......................................................................................................41
5.6.3 Wireless Security Overview .....................................................................................................41
5.6.4 Signal Problems ......................................................................................................................43
5.6.5 WiFi Protected Setup (WPS) ...................................................................................................44
Chapter 6
Router ..................................................................................................................................................51
6.1 Overview ...........................................................................................................................................51
6.1.1 What You Can Do in this Chapter ............................................................................................51
6.2 LAN IP Screen .................................................................................................................................51
6.3 DHCP Server Screen ........................................................................................................................52
6.4 DNS Settings Screen ........................................................................................................................54
6.5 Connected Devices Screen ...............................................................................................................54
6.6 IPv4/Port Filter Screen ......................................................................................................................55
6.7 IPv6/Port Filter Screen ......................................................................................................................56
6.8 URL Filter Screen ..............................................................................................................................57
6.9 IP/Port Forwarding Screen ................................................................................................................58
Chapter 7
Applications ........................................................................................................................................60
7.1 Overview ...........................................................................................................................................60
7.1.1 What You Can Do in this Chapter ............................................................................................60
Table of Contents
WAH7706 User’s Guide
6
7.2 Contact List Screen ...........................................................................................................................60
7.3 SIM Contacts Screen ........................................................................................................................61
7.4 Contacts Settings Screen ..................................................................................................................62
7.5 New SMS Screen .............................................................................................................................62
7.6 Inbox Screen .....................................................................................................................................63
7.7 Outbox Screen ..................................................................................................................................64
7.8 Draft Screen ......................................................................................................................................64
7.9 SIM SMS Screen ...............................................................................................................................65
7.10 File Sharing Screen .........................................................................................................................66
Chapter 8
System.................................................................................................................................................67
8.1 Overview ...........................................................................................................................................67
8.1.1 What You Can Do in this Chapter ............................................................................................67
8.2 System Information Screen ...............................................................................................................67
8.3 User Account Screen ........................................................................................................................68
8.4 Settings Profile Screen ......................................................................................................................70
8.4.1 Reset Settings .........................................................................................................................70
8.4.2 Save Current Settings .............................................................................................................71
8.4.3 Import & Export Settings Profile ..............................................................................................71
8.5 Firmware Upgrade Screen ................................................................................................................71
8.6 Time Settings Screen .......................................................................................................................72
8.7 Power Saving Screen ........................................................................................................................74
8.8 System Log Screen ...........................................................................................................................74
Chapter 9
Troubleshooting..................................................................................................................................77
9.1 Overview ...........................................................................................................................................77
9.2 Power, and Hardware Installation .....................................................................................................77
9.3 WAH7706 Access and Login ............................................................................................................77
9.4 Internet Access .................................................................................................................................79
9.5 Wireless Connections .......................................................................................................................80
9.6 Getting More Troubleshooting Help ..................................................................................................80
Appendix A Customer Support ..........................................................................................................81
Appendix B Common Services ..........................................................................................................87
Appendix C Legal Information ...........................................................................................................91
Index ....................................................................................................................................................99
7
PART I
User’s Guide
WAH7706 User’s Guide
8
CHAPTER 1
Introduction
1.1 Overview
This chapter introduces the main features and applications of the WAH7706.
The WAH7706 is a wireless router, which can connect to a mobile network and the Internet through
a wireless WAN connection and provide easy network access to mobile users without additional
wiring. You can set up a wireless network with other IEEE 802.11b/g/n compatible devices.
A range of services such as a firewall are also available for secure Internet computing.
Optionally, you can insert a micro SD card up to 32GB in size to use the WAH7706 as a portal
storage device at the same time.
Your WAH7706 is easy to install, configure and use. The embedded Web-based configurator enables
simple, straightforward management and maintenance. See the Quick Start Guide for how to make
hardware connections.
1.2 Ways to Manage the WAH7706
You can use the following way to manage the WAH7706.
WAH7706
Chapter 1 Introduction
WAH7706 User’s Guide
9
Web Configurator
The Web Configurator allows easy WAH7706 setup and management using an Internet browser.
This User’s Guide provides information about the Web Configurator.
1.3 Good Habits for Managing the WAH7706
Do the following things regularly to make the WAH7706 more secure and to manage it more
effectively.
• Change the password often. Use a password that’s not easy to guess and that consists of
different types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier
working configuration may be useful if the device becomes unstable or even crashes. If you
forget your password, you will have to reset the WAH7706 to its factory default settings. If you
backed up an earlier configuration file, you won’t have to totally re-configure the WAH7706; you
can simply restore your last configuration.
1.4 Hardware Connections
See your Quick Start Guide for information on making hardware connections. You need to insert a
SIM card before you can use the WAH7706.
1.5 Turn on/off the WAH7706
To turn on the device, press the power button and hold until the ZyXEL logo displays in the OLED
screen.
To turn off the device, press the power button and hold until the word “Shut Down” displays in the
OLED screen.
1.6 OLED Display and Icons
The OLED display is enabled by default when you turn on the WAH7706. You can check the icons
display in the OLED screen to see the connection status, battery life and signal strength.
Note: To enable or disable the OLED display, press the power or the WPS button and
release after the WAH7706 is turned on.
Figure 1 WAH7706 OLED Display
Chapter 1 Introduction
WAH7706 User’s Guide
10
The following table describes the OLED icons.
Table 1 WAH7706 OLED Icons
ICONS DESCRIPTION
The more bars that display, the stronger the signal strength.
The type of the mobile network to which the WAH7706 is connecting.
The Wi-Fi signal strength and the number of wireless clients which are currently connecting
to the WAH7706.
The current battery level and charging state.
There is no SIM card inserted.
There is an error on your SIM card.
There is PIN code authentication on the inserted SIM card.
Chapter 1 Introduction
WAH7706 User’s Guide
11
1.7 Resetting the WAH7706
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the physical Reset button to reload the factory-default configuration file. This means that
you will lose all configurations that you had previously saved, the password will be reset to 1234
and the IP address will be reset to 192.168.1.1.
1.7.1 How to Use the Physical Reset Button
1Make sure the WAH7706 is turned on.
2Remove the bottom cover and press the Reset button until the WAH7706 reboot and set the
WAH7706 back to its factory-default configurations.
This shows the number of unread text messages in the SMS inbox.
The icon is grayed out if there is no messages.
The WAH7706 is sending and receiving data to/from the WAN.
Table 1 WAH7706 OLED Icons (continued)
ICONS DESCRIPTION
WAH7706 User’s Guide
12
CHAPTER 2
The Web Configurator
2.1 Overview
The WAH7706 Web Configurator allows easy management using an Internet browser.
In order to use the Web Configurator, you must:
• Use Internet Explorer 8.0 and later versions, Mozilla Firefox 43.0 and 44.0 versions, Safari 7.0
and 8.0 versions, or Google Chrome 40.0 and 41.0 versions.
• Allow pop-up windows.
• Enable JavaScript (enabled by default).
• Enable Java permissions (enabled by default).
• Enable cookies.
The recommended screen resolution is 1024 x 768 pixels and higher.
2.2 Login Accounts
There is one system account that you can use to log in to the WAH7706: “admin”. The admin
account allows you full access to all system configurations. The default admin user name is “admin”
and password is “1234”.
2.3 Access
1Make sure your WAH7706 hardware is properly connected. See the Quick Start Guide.
2Launch your web browser.
Chapter 2 The Web Configurator
WAH7706 User’s Guide
13
3Type "http://192.168.1.1" as the website address. The Login screen appears.
Your computer must be in the same subnet in order to access this website address.
4Enter the user name (default: “admin” ) and password (default: “1234” ). See Section 2.2 on page
12 for more information about login accounts. Click Login.
5The following screen displays if you have not yet changed your password. Enter a new password,
retype it to confirm and click OK.
6The Home screen appears.
Chapter 2 The Web Configurator
WAH7706 User’s Guide
14
2.4 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Home screen.
Figure 2 The Web Configurator’s Main Screen
The Web Configurator’s main screen is divided into these parts:
A
C
B
D
Chapter 2 The Web Configurator
WAH7706 User’s Guide
15
•A - Title Bar
•B - Navigation Panel_Sub-Menus
•C - Main Window
•D - Navigation Panel_Main Menus
2.4.1 Title Bar
The title bar provides some useful links that always appear over the screens below, regardless of
how deep into the Web Configurator you navigate.
Figure 3 Title Bar
The icons provide the following functions.
2.4.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure WAH7706 features. The
following sections introduce the WAH7706’s navigation panel menus and their screens.
Figure 4 Navigation Panel
Table 2 Title Bar: Web Configurator Icons
LABEL DESCRIPTION
SIM This shows whether a SIM card is inserted in the WAH7706.
The icon shows if there is no SIM card inserted.
Signal Strength This shows the current signal strength to the mobile network.
The icon is grayed out if the mobile data connection is not up.
Service Provider This shows the name of the service provider for the mobile network to which the
WAH7706 is connected.
This shows Searching... if the WAH7706 is not connected to a mobile network yet.
Roaming This shows whether the WAH7706 is connected to another service provider’s mobile
network using roaming.
The icon is grayed out if roaming is disabled on the WAH7706.
Internet This shows whether the WAH7706 has an Internet connection.
The icon shows if the WAH7706 in not connected to the Internet.
Wi-Fi This shows whether the WAH7706’s Wi-Fi network is active and the number of the
connected wireless clients.
Battery The icon shows the battery status.
Language Choose your language from the drop-down list on the upper right corner of the title bar.
Logout Click this to log out of the Web Configurator.
Chapter 2 The Web Configurator
WAH7706 User’s Guide
16
Home Menu
The dashboard displays general device information, system status, system resource usage, and
interface status.
The Home menu screens display status and statistics information.
Table 3 Home Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
Home Display connection mode, wireless LAN information and the
WAH7706’s traffic statistics.
Use this screen to access the wizard.
Chapter 2 The Web Configurator
WAH7706 User’s Guide
17
Internet Menu
WiFi Menu
Router Menu
Table 4 Internet Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
Internet
Internet Status Configure the WAN settings on the WAH7706 for Internet access.
PIN Settings Configure the PIN code when PIN code authentication is enabled.
Change the PIN code for the inserted SIM card.
APN
Configuration Configure user-defined connection profiles.
Network
Selection Display available Public Land Mobile Networks and select a preferred
network for roaming.
Data Usage/
Statistic Specify limiting the amount of the package data and view the
WAH7706’s traffic statistics.
Table 5 WiFi Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
WiFi
Wi-Fi Status Display information about the 2.4GHz/5GHz wireless LAN.
Wi-Fi Settings Enable the wireless LAN and configure the basic wireless settings.
MAC Filter Deny wireless clients based on their MAC addresses from connecting
to the WAH7706.
WPS Activate WPS.
Table 6 Router Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
LAN IP Configure the management IP address for the WAH7706 LAN
interface.
DHCP Server Enable the DHCP server on the WAH7706.
Configure static DHCP entries.
DNS Settings Configure the first and second DNS server IP addresses.
Connected Devices View current clients information of network clients connected to the
WAH7706.
Firewall IPv4/Port Filter Configure IPv4/Port filtering rules.
IPv6/Port Filter Configure IPv6/Port filtering rules.
URL Filter Configure URL filtering rules.
IP/Port
Forwarding
Configure port forwarding rules.
Chapter 2 The Web Configurator
WAH7706 User’s Guide
18
Applications Menu
System Menu
Table 7 Applications Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
Contacts Contact List Configure the contact list saved on the WAH7706.
SIM Contacts Display the contact list saved on the SIM card.
Contacts
Settings
Import or export your contacts.
Short Message
New SMS Send new SMS messages.
Inbox Display messages received on the WAH7706.
Outbox Display messages sent from the WAH7706.
Draft Display messages not yet sent from the WAH7706.
SIM SMS Display messages received on the SIM card.
File Sharing Enable file sharing through the WAH7706.
Table 8 System Menu Screens Summary
MAIN MENU SUB-MENU FUNCTION
System
System
Information Display the WAH7706’s basic information and restart the WAH7706.
User Account Change administrative settings and the password of your WAH7706.
Settings Profile Backup and restore device configurations, or reset your device
settings back to the factory default.
Firmware
Upgrade Upload new firmware to the WAH7706.
Time Settings Change the WAH7706’s time and date.
Select your time zone and configure daylight saving time.
Power Saving Enable and configure the power saving settings in the WAH7706.
System Log Configure to where the WAH7706 is to send logs.
View the logged messages.
19
PART II
Technical Reference
WAH7706 User’s Guide
20
CHAPTER 3
Home
3.1 Overview
Use the Home screen to check status information about the WAH7706. Use the Wizard screens to
configure the WAH7706’s basic Internet access, wireless settings, and the password of your
WAH7706.
3.2 Home
This screen is the first thing you see when you log into the WAH7706. It also appears every time
you click the Home icon in the navigation panel. The Home screen displays the WAH7706’s
connection mode, wireless LAN information and traffic statistics.
Figure 5 Home
The following table describes the labels in this screen.
Table 9 Home
LABEL DESCRIPTION
Manager
Connection
Mode This field displays the connected mode of the WAH7706. Select Always to connect to
the mobile network automatically if there is an available mobile network. Otherwise,
select Manual.
Setup Wizard Click this button to set up the Internet and Wi-Fi.
Wi-Fi 2.4G
SSID This displays a descriptive name used to identify the WAH7706 in the 2.4GHz wireless
LAN.
Chapter 3 Home
WAH7706 User’s Guide
21
3.3 Setup Wizard
Click Home > Setup Wizard to open the wizard screen.
3.3.1 Internet
Select the Auto option if you did not configure the connection profile. Click Next to continue.
Figure 6 Setup Wizard > Set Up Internet: APN Profile
Select the Internet connection mode of the WAH7706. Click Next to continue.
Encryption This displays the level of wireless security the WAH7706 is using.
Clients This field displays the total number of the associated stations.
Wi-Fi 5G
SSID This displays a descriptive name used to identify the WAH7706 in the 5GHz wireless
LAN.
Encryption This displays the level of wireless security the WAH7706 is using.
Clients This field displays the total number of the associated stations.
Internet This field displays the total amount of data in kilobytes that has been transmitted and
received on the WAN interface since the WAH7706 last restarted.
Table 9 Home (continued)
LABEL DESCRIPTION
Chapter 3 Home
WAH7706 User’s Guide
22
Figure 7 Setup Wizard > Set Up Internet: Connection Mode
Specify limiting the amount of the package data and reminding the percentage of the package data
usage. Click Next to configure the Wi-Fi settings.
Figure 8 Setup Wizard > Set Up Internet: Package Data Limit
3.3.2 Wi-Fi
This screen shows the default Wi-Fi key and SSID for the WAH7706’s wireless network. If you set
up a new key and SSID, the wireless clients will lose their wireless connection and need to use new
wireless settings. Click Next to change the login password.
Chapter 3 Home
WAH7706 User’s Guide
23
Figure 9 Wizard > Set Up Wi-Fi
Click Apply to save your changes. The WAH7706 will restart.
Ta ble 10 Apply Settings
WAH7706 User’s Guide
24
CHAPTER 4
Internet
4.1 Overview
This chapter discusses the WAH7706’s Internet screens. Use these screens to configure your
WAH7706 for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks, such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
Figure 10 LAN/Wireless LAN and Wireless WAN
4.1.1 What You Can Do in this Chapter
•Use the Internet Status screen to configure the WAN settings on the WAH7706 for Internet
access (Section 4.2 on page 25).
•Use the PIN Settings screen to enable or disable PIN code authentication (Section 4.3 on page
26).
•Use the APN Configuration screen to configure user-defined connection profiles (Section 4.4 on
page 27).
•Use the Network Selection screen to display available Public Land Mobile Networks and select a
preferred network for roaming (Section 4.5 on page 28).
•Use the Data Usage/Statistic screen to specify limiting the amount of the package data and
view the WAH7706’s traffic statistics (Section 4.6 on page 29).
WAH7706
LAN
Chapter 4 Internet
WAH7706 User’s Guide
25
4.2 Internet Status Screen
Use this screen to change your WAH7706’s Internet access settings. Click Internet > Internet
Status. The screen appears as shown next.
Figure 11 Internet > Internet Status
The following table describes the labels in this screen.
Table 11 Internet > Internet Status
LABEL DESCRIPTION
Internet Status
Network
Provider
This shows the name of the service provider for the mobile network to which the WAH7706
is connected.
Internet Status This shows the mobile data connection status.
IP Address
(IPv4)
This field displays the current IPv4 address assigned to the WAN interface.
IP Address
(IPv6)
This field displays the current IPv6 address assigned to the WAN interface.
Signal Level This shows the current signal strength to the mobile network in dBm.
Network Type This shows the type of the mobile network (such as LTE, UMTS, GSM, HSPA+, etc.) to which
the WAH7706 is connecting.
Connection
Time
This field displays how long you connect to the Internet through IPv4.
Internet Settings
Chapter 4 Internet
WAH7706 User’s Guide
26
4.3 PIN Settings Screen
Use this screen to turn on or turn off PIN code authentication on the inserted SIM card. Click
Internet > PIN Settings. The screen appears as shown next.
Figure 12 Internet > PIN Settings
Allow Data
Roaming
Select this check box to enable data roaming on the WAH7706.
4G roaming is to use your mobile device in an area which is not covered by your service
provider. Enable roaming to ensure that your WAH7706 is kept connected to the Internet
when you are travelling outside the geographical coverage area of the network to which you
are registered.
Cellular
Network Mode
Select the type of the network (4G Mo de, 3G Mode, or 2G Mode) to which you want the
WAH7706 to connect and click Apply to save your settings.
Otherwise, select Auto to have the WAH7706 connect to an available network using the
default settings on the SIM card. If the currently registered mobile network is not available
or the mobile network’s signal strength is too low, the WAH7706 switches to another
available mobile network.
Internet
Connection
Method
Select Always to connect to the mobile network automatically if there is an available mobile
network. Otherwise, select Manual.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Table 11 Internet > Internet Status (continued)
LABEL DESCRIPTION
Chapter 4 Internet
WAH7706 User’s Guide
27
The following table describes the labels in this screen.
4.4 APN Configuration Screen
Use this screen to view or configure a connection profile. A connection profile defines the
parameters that you need to connect to a mobile network, such as the APN, user name and
password. Click Internet > APN Configuration. The screen appears as shown next.
Figure 13 Internet > APN Configuration
Ta ble 12 Internet > PIN Settings
LABEL DESCRIPTION
PIN Protection
Enable PIN
Protection
Click On to turn on PIN code authentication. Otherwise, click Off to turn off PIN code
authentication.
A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN code,
you cannot use the SIM card.
Change PIN Code
Current PIN Enter the default or existing PIN code for the inserted SIM card.
New PIN Configure a new PIN code for the SIM card. You can specify any four to eight digits to havea
new PIN code.
Confirm New
PIN
Enter the new PIN code again for confirmation.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 4 Internet
WAH7706 User’s Guide
28
The following table describes the labels in this screen.
4.5 Network Selection Screen
This screen allows you to view available Public Land Mobile Networks (PLMNs) and select your
preferred network when the WAH7706 is outside the geographical coverage area of the network to
which you are registered and roaming is enabled.
Click Internet > Network Selection. The screen appears as shown next.
Figure 14 Internet > Network Selection
Ta ble 13 Internet > APN Configuration
LABEL DESCRIPTION
Select APN
Profile
Select Auto to reload the default profile. Otherwise, select Manual to configure a
connection profile.
APN This field displays the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charging method.
You can enter up to 30 printable ASCII characters. Spaces are allowed.
Username This field displays the user name in the profile.
Type the user name (of up to 31 printable ASCII characters) given to you by your service
provider.
Password This field displays the password in the profile.
Type the password (of up to 31 printable ASCII characters) associated with the user name
above.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 4 Internet
WAH7706 User’s Guide
29
The following table describes the labels in this screen.
4.6 Data Usage/Statistic Screen
This screen allows you to configure limiting the amount of the package data and view the
WAH7706’s traffic statistics.
Click Internet > Data Usage/St atistic. The screen appears as shown next.
Ta ble 14 Internet > Network Selection
LABEL DESCRIPTION
Select PLMN
Mode
Select Auto to have the WAH7706 automatically connect to the first available mobile
network using roaming when it is outside the coverage area of the original service provider’s
network.
Select Manual to display the network list and manually select a preferred network.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 4 Internet
WAH7706 User’s Guide
30
Figure 15 Internet > Data Usage/Statistic
The following table describes the labels in this screen.
Ta ble 15 Internet > Data Usage/Statistic
LABEL DESCRIPTION
Package Data Limit Setting
Enable Data
Limit
Select the check box to enable data limits.
My Internet
package data
limit is
Specify the limiting the amount of the package data in this field.
Chapter 4 Internet
WAH7706 User’s Guide
31
Remind me
when data
usage is more
than
Specify the reminding percentage of the package data usage in this field.
Usage cycle
reset date
Specify the date that you want the WAH7706 to restart calculating the amount of the
package data per month.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Reset Network Statistics
Reset all
statistics and
histories
Click Reset to remove all traffic statistics.
Current Connection Statistics
Data Flow This indicates the current traffic flow transmitting from/to the WAH7706.
Sent This indicates the number of transmitted packets on the WAH7706.
Received This indicates the number of received packets on the WAH7706.
Total Connection Statistics
Data Flow This indicates total traffic flows transmitting from/to the WAH7706.
Sent This indicates the number of transmitted packets on the WAH7706.
Received This indicates the number of received packets on the WAH7706.
Ta ble 15 Internet > Data Usage/Statistic
LABEL DESCRIPTION
WAH7706 User’s Guide
32
CHAPTER 5
Wi-Fi
5.1 Overview
This chapter describes the WAH7706’s Wi-Fi screens. Use these screens to set up your WAH7706’s
wireless LAN connection.
5.1.1 What You Can Do in this Chapter
•Use the Wi-Fi Status screen to view information about the 2.4GHz/5GHz wireless LAN (Section
5.2 on page 33).
•Use the Wi-Fi Settings screen to enable the wireless LAN, enter the SSID and select the
wireless security mode (Section 5.3 on page 34).
•Use the MAC Filter screen to deny wireless clients based on their MAC addresses from
connecting to the WAH7706 (Section 5.4 on page 37).
•Use the WPS screen to activate WPS via PBC or PIN configuration (Section 5.5 on page 38).
Chapter 5 Wi-Fi
WAH7706 User’s Guide
33
5.1.2 What You Need to Know
Wireless Basics
“Wireless” is essentially radio communication. In the same way that walkie-talkie radios send and
receive information over the airwaves, wireless networking devices exchange information with one
another. A wireless networking device is just like a radio that lets your computer exchange
information with radios attached to other computers. Like walkie-talkies, most wireless networking
devices operate at radio frequency bands that are open to the public and do not require a license to
use. However, wireless networking is different from that of most traditional radio communications in
that there a number of wireless networking standards available with different methods of data
encryption.
Guest WLAN
Guest WLAN allows you to set up a wireless network where users can access to Internet via the
WAH7706 (Z), but not other networks connected to the Z. In the following figure, a guest user can
access the Internet from the guest wireless network A via Z but not the home or company network
N.
Note: The home or company network N and Guest WLAN network are independent
networks.
Guest Wireless LAN NetworkFinding Out More
See Section 5.6 on page 39 for advanced technical information on wireless networks.
5.2 Wi-Fi Status Screen
Use this screen to view information about the 2.4GHz/5GHz wireless LAN. Click Wi-Fi > Wi-Fi
Status to access this screen.
N
A
Z
Chapter 5 Wi-Fi
WAH7706 User’s Guide
34
Figure 16 Wi-Fi > Wi-Fi Status
The following table describes the labels in this screen.
5.3 Wi-Fi Settings Screen
Use this screen to enable the wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the WAH7706 from a computer connected to the wireless
LAN and you change the WAH7706’s SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the WAH7706’s new
settings.
To access this screen, click Wi-Fi > Wi-Fi Settings.
Ta ble 16 Wi-Fi > Wi-Fi Status
LABEL DESCRIPTION
Wi-Fi Status
SSID 1/ SSID2 The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
This displays the basic wireless settings of SSID 1 and SSID 2.
SSID 1/ SSID2 This displays a descriptive name used to identify the WAH7706 in the 2.4GHz/5GHz
wireless LAN.
Encryption This field displays the level of wireless security the WAH7706 is using.
MAC Address This field displays the 2.4GHz/5GHz wireless adapter MAC Address of your device.
Channel This field displays the channel number which you select manually.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
35
Figure 17 Wi-Fi > Wi-Fi Settings
The following table describes the labels in this screen.
Ta ble 17 Wi-Fi > Wi-Fi Settings
LABEL DESCRIPTION
Max Wi-Fi client
number
Select a number to specify maximum client the Guest Wi-Fi network can use. Click Apply to
save your changes.
SSID 1/ SSID 2 Select SSID 1 (or SSID 2) to configure the basic wireless settings.
Enable SSID 1
(or SSID 2)
Select the check box to enable the wireless LAN of the WAH7706.
Wireless Band Select the frequency band to set whether you want to apply the wireless and security
settings to the default 2.4GHz or 5GHz wireless LAN.
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
36
Encryption
Mode
Select WPA, WPA2, or WPA/WPA2 to add security on this wireless network. The wireless
clients which want to associate to this network must have same wireless security settings as
the WAH7706. When you select to use a security, additional options appears in this screen.
Select WPA/WPA2 to allow wireless devices that support either WPA or WPA2 to connect to
your WAH7706’s wireless network.
Select WPA to allow only wireless devices that support WPA to connect to your WAH7706’s
wireless network.
Select WPA2 to allow only wireless devices that support WPA2 to connect to your
WAH7706’s wireless network.
Or you can select NO ENCRYPTION to allow any client to associate this network without
any data encryption or authentication.
SSID Visibility Select Disable to hide the SSID in the outgoing beacon frame so a station cannot obtain the
SSID through scanning using a site survey tool. Otherwise, select Enable.
Wi-Fi Network
Mode
If you set Wireless Band to 2.4GHz, you can use the 802.11 mode from the following:
•802.11 bgn: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN
devices to associate with the WAH7706. The transmission rate of your WAH7706 might
be reduced.
If you set Wireless Band to 5GHz, you can use the 802.11 mode from the following:
•802.11a/n/ac: allows IEEE802.11n, IEEE802.11a and IEEE 802.11c compliant WLAN
devices to associate with the WAH7706.
Channel Width This field displays the wireless channel width used by WAH7706.
A standard 20MHz channel offers transfer speeds of up to 144Mbps (2.4GHz) or 217Mbps
(5GHZ) whereas a 40MHz channel uses two standard channels and offers speeds of up to
300Mbps (2.4GHz) or 450Mbps (5GHZ).
Channel Set the channel depending on your particular region.
Select a channel or use Auto Channel to have the WAH7706 automatically determine a
channel to use. If you are having problems with wireless interference, changing the channel
may help. Try to use a channel that is as many channels away from any channels used by
neighboring APs as possible. The channel number which the WAH7706 is currently using
then displays next to this field.
The following fields are available if you set Encryption Mode to WPA, WPA2, or WPA/
WPA2.
Encryption Type Select the encryption type (AES-CCMP or AUTO) for data encryption.
Select AES-CCMP if your wireless clients can all use AES-CCMP.
Select AUTO (TKIP+AES - CC MP) to allow the wireless clients to use either TKIP or AES-
CCMP.
Encryption Key The WEP keys are used to encrypt data. Both the WAH7706 and the wireless clients must
use the same WEP key for data transmission.
Select ASCII in order to enter ASCII characters as WEP key. Select HEX in order to enter
hexadecimal characters as a WEP key.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 17 Wi-Fi > Wi-Fi Settings
LABEL DESCRIPTION
Chapter 5 Wi-Fi
WAH7706 User’s Guide
37
5.4 MAC Filter Screen
This screen allows you to configure the WAH7706 to exclude specific devices from accessing the
WAH7706 (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this
screen.
Use this screen to view your WAH7706’s MAC filter settings and add new MAC filter rules. Click Wi-
Fi > MAC Filter. The screen appears as shown.
Figure 18 Wi-Fi > MAC Filter
The following table describes the labels in this screen.
Ta ble 18 Wi-Fi > MAC Filter
LABEL DESCRIPTION
SSID 1/ SSID 2 Select SSID 1 (or SSID 2) to configure the MAC filtering rules.
Enable MAC
Filter of SSID 1
(or SSID 2)
Select Enable MAC Filter of SSID 1 (or SSID 2) to prohibit devices with the MAC
addresses you configured.
Blacklist This field displays how many entries you display on this page.
Add New Click Add New to create a new entry.
Delete All Click Delet e All to remove all entries.
This field displays the index number of the MAC address entry.
MAC Address This field displays the MAC addresses of the wireless devices that are allowed or denied
access to the WAH7706.
Click Add New or Edit to enter or change the MAC address of the wireless devices that are
allowed or denied access to the WAH7706 in this field. Enter the MAC addresses in a valid
MAC address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Description This field displays the name of the MAC address entry.
Click Add New or Edit to enter a descriptive name to identify the MAC address entry. You
can enter up to 20 printable ASCII characters. Spaces are allowed.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
38
5.5 WPS Screen
Use this screen to configure Wi-Fi Protected Setup (WPS) on your WAH7706.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See Section 5.6.5.3 on page 46 for more information about WPS.
Note: To use the WPS feature, make sure you have wireless enabled in the Wi-Fi > Wi-
Fi Settings screen.
Note: If you want to use the WPS feature set the security type to WPA or None.
Click Wi-Fi > WPS. The following screen displays.
Figure 19 Wi-Fi > WPS
The following table describes the labels in this screen.
Action Click Edit to go to the screen where you can edit the rule.
Click Delete to remove the MAC address entry.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 18 Wi-Fi > MAC Filter (continued)
LABEL DESCRIPTION
Ta ble 19 Wi-Fi > WPS
LABEL DESCRIPTION
Select WPS
Interface
Select SSID 1 (or SSID 2 ) to configure WPS.
Enable Select On to activate WPS on the WAH7706. Otherwise, select Off.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
39
5.6 Technical Reference
This section discusses wireless LANs in depth.
5.6.1 Wireless Network Overview
Wireless networks consist of wireless clients, access points and bridges.
• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can connect with
numerous wireless clients and let them access the network.
• A bridge is a radio that relays communications between access points and wireless clients,
extending a network’s range.
Traditionally, a wireless network operates in one of two ways.
• An “infrastructure” type of network has one or more access points and one or more wireless
clients. The wireless clients connect to the access points.
• An “ad-hoc” type of network is one in which there is no access point. Wireless clients connect to
one another in order to exchange information.
The following figure provides an example of a wireless network.
Select WPS
Method
•Select PBC to set up a WPS wireless network using Push Button Configuration (PBC).
If you select PBC, click Activate to add another WPS-enabled wireless device (within
wireless range of the WAH7706) to your wireless network. This button may either be a
physical button on the outside of device, or a menu button similar to the Connect button on
this screen.
Note: You must press the other wireless device’s WPS button within two minutes of pressing
this button.
•Select PIN to set up a WPS wireless network by entering the PIN of the client into the
WAH7706.
WPS PIN This field is available only when you set Select WPS Method to PIN.
Select this option and enter the PIN of the device that you are setting up a WPS connection
with and click Apply to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device’s
settings.
Note: You must also activate WPS on that device within two minutes to have it present its PIN
to the WAH7706.
Ta ble 19 Wi-Fi > WPS (continued)
LABEL DESCRIPTION
Chapter 5 Wi-Fi
WAH7706 User’s Guide
40
Figure 20 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B use the
access point (AP) to interact with the other devices (such as the printer) or with the Internet. Your
WAH7706 is the AP.
Every wireless network must follow these basic guidelines.
• Every device in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentifier.
• If two wireless networks overlap, they should use a different channel.
Like radio stations or television channels, each wireless network uses a specific channel, or
frequency, to send and receive information.
• Every device in the same wireless network must use security compatible with the AP.
Security stops unauthorized devices from using the wireless network. It can also protect the
information that is sent in the wireless network.
Radio Channels
In the radio spectrum, there are certain frequency bands allocated for unlicensed, civilian use. For
the purposes of wireless networking, these bands are divided into numerous channels. This allows a
variety of networks to exist in the same place without interfering with one another. When you
create a network, you must select a channel to use.
Since the available unlicensed spectrum varies from one country to another, the number of
available channels also varies.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
41
5.6.2 Additional Wireless Terms
The following table describes some wireless network terms and acronyms used in the WAH7706’s
Web Configurator.
5.6.3 Wireless Security Overview
By their nature, radio communications are simple to intercept. For wireless data networks, this
means that anyone within range of a wireless network without security can not only read the data
passing over the airwaves, but also join the network. Once an unauthorized person has access to
the network, he or she can steal information or introduce malware (malicious software) intended to
compromise the network. For these reasons, a variety of security systems have been developed to
ensure that only authorized people can use a wireless data network, or understand the data carried
on it.
These security standards do two things. First, they authenticate. This means that only people
presenting the right credentials (often a username and password, or a “key” phrase) can access the
network. Second, they encrypt. This means that the information sent over the air is encoded. Only
people with the code key can understand the information, and only people who have been
authenticated are given the code key.
These security standards vary in effectiveness. Some can be broken, such as the old Wired
Equivalent Protocol (WEP). Using WEP is better than using no security at all, but it will not keep a
determined attacker out. Other security standards are secure in themselves but can be broken if a
user does not use them properly. For example, the WPA-PSK security standard is very secure if you
use a long key which is difficult for an attacker’s software to guess - for example, a twenty-letter
long string of apparently random numbers and letters - but it is not very secure if you use a short
key which is very easy to guess - for example, a three-letter word from the dictionary.
Because of the damage that can be done by a malicious attacker, it’s not just people who have
sensitive information on their network who should use security. Everybody who uses any wireless
network should ensure that effective security is in place.
A good way to come up with effective security keys, passwords and so on is to use obscure
information that you personally will easily remember, and to enter it in a way that appears random
Ta ble 20 Additional Wireless Terms
TERM DESCRIPTION
RTS/CTS Threshold In a wireless network which covers a large area, wireless devices are sometimes not
aware of each other’s presence. This may cause them to send information to the AP
at the same time and result in information colliding and not getting through.
By setting this value lower than the default value, the wireless devices must
sometimes get permission to send information to the WAH7706. The lower the value,
the more often the devices must get permission.
If this value is greater than the fragmentation threshold value (see below), then
wireless devices never have to get permission to send information to the WAH7706.
Preamble A preamble affects the timing in your wireless network. There are two preamble
modes: long and short. If a device uses a different preamble mode than the
WAH7706 does, it cannot communicate with the WAH7706.
Authentication The process of verifying whether a wireless device is allowed to use the wireless
network.
Fragmentation
Threshold
A small fragmentation threshold is recommended for busy networks, while a larger
threshold provides faster performance if the network is not very busy.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
42
and does not include real words. For example, if your mother owns a 1970 Dodge Challenger and
her favorite movie is Vanishing Point (which you know was made in 1971) you could use
“70dodchal71vanpoi” as your security key.
The following sections introduce different types of wireless security you can set up in the wireless
network.
5.6.3.1 SSID
Normally, the WAH7706 acts like a beacon and regularly broadcasts the SSID in the area. You can
hide the SSID instead, in which case the WAH7706 does not broadcast the SSID. In addition, you
should change the default SSID to something that is difficult to guess.
This type of security is fairly weak, however, because there are ways for unauthorized wireless
devices to get the SSID. In addition, unauthorized wireless devices can still see the information that
is sent in the wireless network.
5.6.3.2 MAC Address Filter
Every device that can use a wireless network has a unique identification number, called a MAC
address.1 A MAC address is usually written using twelve hexadecimal characters2; for example,
00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each device in the wireless
network, see the device’s User’s Guide or other documentation.
You can use the MAC address filter to tell the WAH7706 which devices are allowed or not allowed to
use the wireless network. If a device is allowed to use the wireless network, it still has to have the
correct information (SSID, channel, and security). If a device is not allowed to use the wireless
network, it does not matter if it has the correct information.
This type of security does not protect the information that is sent in the wireless network.
Furthermore, there are ways for unauthorized wireless devices to get the MAC address of an
authorized device. Then, they can use that MAC address to use the wireless network.
5.6.3.3 User Authentication
Authentication is the process of verifying whether a wireless device is allowed to use the wireless
network. You can make every user log in to the wireless network before using it. However, every
device in the wireless network has to support IEEE 802.1x to do this.
For wireless networks, you can store the user names and passwords for each user in a RADIUS
server. This is a server used in businesses more than in homes. If you do not have a RADIUS server,
you cannot set up user names and passwords for your users.
Unauthorized wireless devices can still see the information that is sent in the wireless network,
even if they cannot use the wireless network. Furthermore, there are ways for unauthorized
wireless users to get a valid user name and password. Then, they can use that user name and
password to use the wireless network.
1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds
of wireless devices might not have MAC addresses.
2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
43
5.6.3.4 Encryption
Wireless networks can use encryption to protect the information that is sent in the wireless
network. Encryption is like a secret code. If you do not know the secret code, you cannot
understand the message.
The types of encryption you can choose depend on the type of authentication. (See Section 5.6.3.3
on page 42 for information about this.)
For example, if the wireless network has a RADIUS server, you can choose WPA or WPA2. If users
do not log in to the wireless network, you can choose no encryption, Static WEP, WPA-PSK, or
WPA2-PSK.
Usually, you should set up the strongest encryption that every device in the wireless network
supports. For example, suppose you have a wireless network with the WAH7706 and you do not
have a RADIUS server. Therefore, there is no authentication. Suppose the wireless network has two
devices. Device A only supports WEP, and device B supports WEP and WPA. Therefore, you should
set up Static WEP in the wireless network.
Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger
encryption. The other types of encryption are better than none at all, but it is still
possible for unauthorized wireless devices to figure out the original information
pretty quickly.
When you select WPA2 or WPA2-PSK in your WAH7706, you can also select an option (WPA
compatible) to support WPA as well. In this case, if some of the devices support WPA and some
support WPA2, you should set up WPA2-PSK or WPA2 (depending on the type of wireless network
login) and select the WPA compatible option in the WAH7706.
Many types of encryption use a key to protect the information in the wireless network. The longer
the key, the stronger the encryption. Every device in the wireless network must have the same key.
5.6.4 Signal Problems
Because wireless networks are radio networks, their signals are subject to limitations of distance,
interference and absorption.
Problems with distance occur when the two radios are too far apart. Problems with interference
occur when other radio waves interrupt the data signal. Interference may come from other radio
transmissions, such as military or air traffic control communications, or from machines that are
coincidental emitters such as electric motors or microwaves. Problems with absorption occur when
physical objects (such as thick walls) are between the two radios, muffling the signal.
Ta ble 21 Types of Encryption for Each Type of Authentication
NO AUTHENTICATION RADIUS SERVER
Weakest No Security WPA
Static WEP
WPA-PSK
Strongest WPA2-PSK WPA2
Chapter 5 Wi-Fi
WAH7706 User’s Guide
44
5.6.5 WiFi Protected Setup (WPS)
Your WAH7706 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
Depending on the devices you have, you can either press a button (on the device itself, or in its
configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device
to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set
up a secure network by themselves.
5.6.5.1 Push Button Configuration
WPS Push Button Configuration (PBC) is initiated by pressing a button on each WPS-enabled
device, and allowing them to connect automatically. You do not need to enter any information.
Not every WPS-enabled device has a physical WPS button. Some may have a WPS PBC button in
their configuration utilities instead of or in addition to the physical button.
Take the following steps to set up WPS using the button.
1Ensure that the two devices you want to set up are within wireless range of one another.
2Look for a WPS button on each device. If the device does not have one, log into its configuration
utility and locate the button (see the device’s User’s Guide for how to do this - for the WAH7706,
see Section 5.5 on page 38).
3Press the button on one of the devices (it doesn’t matter which). For the WAH7706 you must press
the WPS button for more than three seconds.
4Within two minutes, press the button on the other device. The registrar sends the network name
(SSID) and security key through an secure connection to the enrollee.
If you need to make sure that WPS worked, check the list of associated wireless clients in the AP’s
configuration utility. If you see the wireless client in the list, WPS was successful.
5.6.5.2 PIN Configuration
Each WPS-enabled device has its own PIN (Personal Identification Number). This may either be
static (it cannot be changed) or dynamic (in some devices you can generate a new PIN by clicking
on a button in the configuration interface).
Use the PIN method instead of the push-button configuration (PBC) method if you want to ensure
that the connection is established between the devices you specify, not just the first two devices to
activate WPS in range of each other. However, you need to log into the configuration interfaces of
both devices to use the PIN method.
When you use the PIN method, you must enter the PIN from one device (usually the wireless client)
into the second device (usually the Access Point or wireless router). Then, when WPS is activated
Chapter 5 Wi-Fi
WAH7706 User’s Guide
45
on the first device, it presents its PIN to the second device. If the PIN matches, one device sends
the network and security information to the other, allowing it to join the network.
Take the following steps to set up a WPS connection between an access point or wireless router
(referred to here as the AP) and a client device using the PIN method.
1Ensure WPS is enabled on both devices.
2Access the WPS section of the AP’s configuration interface. See the device’s User’s Guide for how to
do this.
3Look for the client’s WPS PIN; it will be displayed either on the device, or in the WPS section of the
client’s configuration interface (see the device’s User’s Guide for how to find the WPS PIN - for the
WAH7706, see Section 5.5 on page 38).
4Enter the client’s PIN in the AP’s configuration interface.
5If the client device’s configuration interface has an area for entering another device’s PIN, you can
either enter the client’s PIN in the AP, or enter the AP’s PIN in the client - it does not matter which.
6Start WPS on both devices within two minutes.
7Use the configuration utility to activate WPS, not the push-button on the device itself.
8On a computer connected to the wireless client, try to connect to the Internet. If you can connect,
WPS was successful.
If you cannot connect, check the list of associated wireless clients in the AP’s configuration utility. If
you see the wireless client in the list, WPS was successful.
The following figure shows a WPS-enabled wireless client (installed in a notebook computer)
connecting to the WPS-enabled AP via the PIN method.
Chapter 5 Wi-Fi
WAH7706 User’s Guide
46
Figure 21 Example WPS Process: PIN Method
5.6.5.3 How WPS Works
When two WPS-enabled devices connect, each device must assume a specific role. One device acts
as the registrar (the device that supplies network and security settings) and the other device acts
as the enrollee (the device that receives network and security settings. The registrar creates a
secure EAP (Extensible Authentication Protocol) tunnel and sends the network name (SSID) and the
WPA-PSK or WPA2-PSK pre-shared key to the enrollee. Whether WPA-PSK or WPA2-PSK is used
depends on the standards supported by the devices. If the registrar is already part of a network, it
sends the existing information. If not, it generates the SSID and WPA(2)-PSK randomly.
The following figure shows a WPS-enabled client (installed in a notebook computer) connecting to a
WPS-enabled access point.
ENROLLEE
SECURE EAP TUNNEL
SSID
WPA(2)-PSK
WITHIN 2 MINUTES
COMMUNICATION
This device’s
WPS
Enter WPS PIN
WPS
from other device:
WPS PIN: 123456
WPS
START
WPS
START
REGISTRAR
Chapter 5 Wi-Fi
WAH7706 User’s Guide
47
Figure 22 How WPS works
The roles of registrar and enrollee last only as long as the WPS setup process is active (two
minutes). The next time you use WPS, a different device can be the registrar if necessary.
The WPS connection process is like a handshake; only two devices participate in each WPS
transaction. If you want to add more devices you should repeat the process with one of the existing
networked devices and the new device.
Note that the access point (AP) is not always the registrar, and the wireless client is not always the
enrollee. All WPS-certified APs can be a registrar, and so can some WPS-enabled wireless clients.
By default, a WPS devices is “unconfigured”. This means that it is not part of an existing network
and can act as either enrollee or registrar (if it supports both functions). If the registrar is
unconfigured, the security settings it transmits to the enrollee are randomly-generated. Once a
WPS-enabled device has connected to another device using WPS, it becomes “configured”. A
configured wireless client can still act as enrollee or registrar in subsequent WPS connections, but a
configured access point can no longer act as enrollee. It will be the registrar in all subsequent WPS
connections in which it is involved. If you want a configured AP to act as an enrollee, you must reset
it to its factory defaults.
5.6.5.4 Example WPS Network Setup
This section shows how security settings are distributed in an example WPS setup.
The following figure shows an example network. In step 1, both AP1 and Client 1 are
unconfigured. When WPS is activated on both, they perform the handshake. In this example, AP1
is the registrar, and Client 1 is the enrollee. The registrar randomly generates the security
information to set up the network, since it is unconfigured and has no existing information.
SECURE TUNNEL
SECURITY INFO
WITHIN 2 MINUTES
COMMUNICATION
ACTIVATE
WPS
ACTIVATE
WPS
WPS HANDSHAKE
REGISTRARENROLLEE
Chapter 5 Wi-Fi
WAH7706 User’s Guide
48
Figure 23 WPS: Example Network Step 1
In step 2, you add another wireless client to the network. You know that Client 1 supports registrar
mode, but it is better to use AP1 for the WPS handshake with the new client since you must
connect to the access point anyway in order to use the network. In this case, AP1 must be the
registrar, since it is configured (it already has security information for the network). AP1 supplies
the existing security information to Client 2.
Figure 24 WPS: Example Network Step 2
In step 3, you add another access point (AP2) to your network. AP2 is out of range of AP1, so you
cannot use AP1 for the WPS handshake with the new access point. However, you know that Client
2 supports the registrar function, so you use it to perform the WPS handshake instead.
REGISTRARENROLLEE
SECURITY INFO
CLIENT 1 AP1
REGISTRAR
CLIENT 1 AP1
ENROLLEE
CLIENT 2
EXISTING CONNECTION
SECURITY INFO
Chapter 5 Wi-Fi
WAH7706 User’s Guide
49
Figure 25 WPS: Example Network Step 3
5.6.5.5 Limitations of WPS
WPS has some limitations of which you should be aware.
• WPS works in Infrastructure networks only (where an AP and a wireless client communicate). It
does not work in Ad-Hoc networks (where there is no AP).
• When you use WPS, it works between two devices only. You cannot enroll multiple devices
simultaneously, you must enroll one after the other.
For instance, if you have two enrollees and one registrar you must set up the first enrollee (by
pressing the WPS button on the registrar and the first enrollee, for example), then check that it
successfully enrolled, then set up the second device in the same way.
• WPS works only with other WPS-enabled devices. However, you can still add non-WPS devices to
a network you already set up using WPS.
WPS works by automatically issuing a randomly-generated WPA-PSK or WPA2-PSK pre-shared
key from the registrar device to the enrollee devices. Whether the network uses WPA-PSK or
WPA2-PSK depends on the device. You can check the configuration interface of the registrar
device to discover the key the network is using (if the device supports this feature). Then, you
can enter the key into the non-WPS device and join the network as normal (the non-WPS device
must also support WPA-PSK or WPA2-PSK).
• When you use the PBC method, there is a short period (from the moment you press the button
on one device to the moment you press the button on the other device) when any WPS-enabled
device could join the network. This is because the registrar has no way of identifying the
“correct” enrollee, and cannot differentiate between your enrollee and a rogue device. This is a
possible way for a hacker to gain access to a network.
You can easily check to see if this has happened. WPS works between only two devices
simultaneously, so if another device has enrolled your device will be unable to enroll, and will not
have access to the network. If this happens, open the access point’s configuration interface and
look at the list of associated clients (usually displayed by MAC address). It does not matter if the
CLIENT 1 AP1
REGISTRAR
CLIENT 2
EXISTING CONNECTION
SECURITY INFO
ENROLLEE
AP2
EXISTING CONNECTION
Chapter 5 Wi-Fi
WAH7706 User’s Guide
50
access point is the WPS registrar, the enrollee, or was not involved in the WPS handshake; a
rogue device must still associate with the access point to gain access to the network. Check the
MAC addresses of your wireless clients (usually printed on a label on the bottom of the device). If
there is an unknown MAC address you can remove it or reset the AP.
WAH7706 User’s Guide
51
CHAPTER 6
Router
6.1 Overview
This chapter describes how you can configure the management IP address, DHCP settings of your
WAH7706, the IP filtering and content filtering settings.
The Internet Protocol (IP) address identifies a device on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to communicate across
the network. These networking devices are also known as hosts.
6.1.1 What You Can Do in this Chapter
•Use the LAN IP screen to configure the WAH7706’s LAN IP address (Section 6.2 on page 51).
•Use the DHCP Server screen to enable the DHCP server on the WAH7706 (Section 6.3 on page
52).
•Use the DNS Settings screen to configure the WAH7706’s DNS settings (Section 6.4 on page
54).
•Use the Connected De vices screen to view current clients information (Section 6.5 on page
54).
•Use the IPv4/Port Filter screen to view and configure IPv4/Port filtering rules (Section 6.6 on
page 55).
•Use the IPv6/Port Filter screen to view and configure IPv6/Port filtering rules (Section 6.7 on
page 56).
•Use the URL Filter screen to view and configure content filtering rules (Section 6.8 on page 57).
•Use the IP/Port Forwarding screen to view and configure port forwarding rules (Section 6.9 on
page 58).
6.2 LAN IP Screen
Use this screen to view or configure the management IP address for your WAH7706. To access this
screen, click Router > LAN IP.
Note: If you change the WAH7706’s IP address, you need to use the new IP address to
access the WAH7706’s web configurator.
Chapter 6 Router
WAH7706 User’s Guide
52
Figure 26 Router > LAN IP
The following table describes the labels in this screen.
6.3 DHCP Server Screen
The WAH7706 has built-in DHCP server capability that assigns IP addresses to systems that support
DHCP client capability. Use this screen to enable the DHCP server. To access this screen, click
Router > DHCP Server.
Ta ble 22 Router > LAN IP
LABEL DESCRIPTION
Host Name This shows the default host name.
Enter the new host name for the WAH7706 if you want to change it.
IP Address This shows the default LAN IP address.
Enter the new IP address for the WAH7706’s LAN interface if you want to change it.
Subnet Mask This shows the default subnet mask.
Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 6 Router
WAH7706 User’s Guide
53
Figure 27 Router > DHCP Server
The following table describes the labels in this screen.
Ta ble 23 Router > DHCP Server
LABEL DESCRIPTION
DHCP Settings
Enable DHCP Server Select the check box to enable the DHCP server on the WAH7706.
Start IP The WAH7706 is pre-configured with a pool of 100 IP addresses starting from
192.168.0.100 to 192.168.0.199.
This field specifies the first of the contiguous addresses in the IP address pool.
End IP This field specifies the last of the contiguous addresses in the IP address pool.
Lease Time
(minutes)
Specify how long (in minutes) each computer can use the information (especially the IP
address) before it has to request the information again.
Static DHCP List
Add New Click Add New to create a new entry.
This field displays the index number of the static IP address entry.
IP Address This field displays the IP address that the WAH7706 assigns to a device with the entry’s
MAC address.
MAC Address This field displays the MAC address of the device to which the WAH7706 assigns the
entry’s IP address.
Action Click Edit to go to the screen where you can edit the static IP address.
Click Delete to remove the static IP address entry.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 6 Router
WAH7706 User’s Guide
54
6.4 DNS Settings Screen
Click Router > DNS Settings to configure the WAH7706’s DNS settings. The following screen
displays.
Figure 28 Router > DNS Settings
The following table describes the labels in this screen.
6.5 Connected Devices Screen
Click Router > Connected Devices to view current clients information (including IP Address, Host
Name and MAC Address) of network clients connected to the WAH7706. The following screen
displays.
Figure 29 Router > Connected Devices
Ta ble 24 Router > DNS Settings
LABEL DESCRIPTION
DNS Mode Select Auto if your ISP dynamically assigns DNS server information (and the WAH7706's
WAN IP address). Otherwise, select Manual if you have the IP address of a DNS server.
Primary DNS
Secondary DNS
Select Manual if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 6 Router
WAH7706 User’s Guide
55
The following table describes the labels in this screen.
6.6 IPv4/Port Filter Screen
The WAH7706 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. To access this screen, click Router > Firewall > IPv4/Port Filter.
Figure 30 Router > Firewall > IPv4/Port Filter
The following table describes the labels in this screen.
Ta ble 25 Router > Connected Devices
LABEL DESCRIPTION
MAC Address This field displays the MAC address of the device.
Host Name (If
any)
This field displays the device host name.
IP Address This field displays the IP address that the WAH7706 assigns to the device.
Ta ble 26 Router > Firewall > IPv4/Port Filter
LABEL DESCRIPTION
IPv4/Port Filter
Enable IPv4/
Port Filter
Select the check box to enable the rule.
IPv4/Port Filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Source IP This field displays the source IP addresses to which this rule applies.
Port This field displays a single port number of the source or the starting port number of a range.
Enter the port number/range of the source that define the traffic type, for example TCP port
80 defines web traffic.
Protocol This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets
for which you want to apply the rule.
Dest. IP This field displays the destination IP addresses to which this rule applies.
Chapter 6 Router
WAH7706 User’s Guide
56
6.7 IPv6/Port Filter Screen
The WAH7706 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. To access this screen, click Router > Firewall > IPv6/Port Filter.
Figure 31 Router > Firewall > IPv6/Port Filter
The following table describes the labels in this screen.
Port This field displays a single port number of the destination or the starting port number of a
range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Comment Enter descriptions of the rule in this field.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 26 Router > Firewall > IPv4/Port Filter
LABEL DESCRIPTION
Ta ble 27 Router > Firewall > IPv6/Port Filter
LABEL DESCRIPTION
IPv6/Port Filter
Enable IPv6/
Port Filter
Select the check box to enable the rule.
IPv6/Port Filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Source IP This field displays the source IP addresses to which this rule applies.
Chapter 6 Router
WAH7706 User’s Guide
57
6.8 URL Filter Screen
Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Router > Firewall > URL Filter.
Figure 32 Router > Firewall > URL Filter
Port This field displays a single port number of the source or the starting port number of a range.
Enter the port number/range of the source that define the traffic type, for example TCP port
80 defines web traffic.
Protocol This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets
for which you want to apply the rule.
Dest. IP This field displays the destination IP addresses to which this rule applies.
Port This field displays a single port number of the destination or the starting port number of a
range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Comment Enter descriptions of the rule in this field.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 27 Router > Firewall > IPv6/Port Filter
LABEL DESCRIPTION
Chapter 6 Router
WAH7706 User’s Guide
58
The following table describes the labels in this screen.
6.9 IP/Port Forwarding Screen
Use this screen to configure port forwarding rules. To access this screen, click Router > Firewall >
IP/Port Forwarding.
Figure 33 Router > Firewall > IP/Port Forwarding
The following table describes the labels in this screen.
Ta ble 28 Router > Firewall > URL Filter
LABEL DESCRIPTION
URL filter
Enable URL
Filter
Select the check box to enable the rule.
URL filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Keywords of
URL or Domain
This field displays the website URL to which the WAH7706 blocks.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 29 Router > Firewall > IP/Port Forwarding
LABEL DESCRIPTION
IP/Port Forwarding
Enable IP/Port
Forwarding
Select the check box to enable port forwarding rules.
Chapter 6 Router
WAH7706 User’s Guide
59
Filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Private IP This field displays the inside IP address of the server.
Enter the inside IP address of the virtual server here.
Private Port A private port is a port that causes (or triggers) the WAH7706 to record the IP address of
the LAN computer that sent the traffic to a server on the WAN.
Enter the port number/range of the private in this field.
Global Port A global port is a port that a server on the WAN uses when it sends out a particular service.
The WAH7706 forwards the traffic with this port to the client computer on the LAN that
requested the service.
Enter the port number/range of the global in this field.
Protocol This field displays the protocol (TCP, UDP, TCP+UDP) used to transport the packets for
which you want to apply the rule.
Action Click Edit to go to the screen where you can edit the port forwarding rule.
Click Delete to remove the port forwarding rule.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Ta ble 29 Router > Firewall > IP/Port Forwarding
LABEL DESCRIPTION
WAH7706 User’s Guide
60
CHAPTER 7
Applications
7.1 Overview
This chapter shows you how to set up a contact list, send and view the text messages, and
configure file sharing.
SMS (Short Message Service) allows you to send and view the text messages that the WAH7706
received from mobile devices or the service provider.
When the SMS box is full the WAH7706 will begin to delete older entries as it adds new ones.
7.1.1 What You Can Do in this Chapter
•Use the Application > Contacts > Contact List screen to configure the contact list saved on
the WAH7706 (Section 7.2 on page 60).
•Use the Application > Contacts > SIM Contacts screen to view the contact list saved on the
SIM card (Section 7.3 on page 61).
•Use the Application > Contacts > Contacts Settings screen to import or export the contacts
files (Section 7.4 on page 62).
•Use the Application > Short Message > New SMS screen to send new messages (Section 7.5
on page 62).
•Use the Application > Short Message > Inbox screen to view messages received on the
WAH7706 (Section 7.6 on page 63).
•Use the Application > Short Message > Outbox screen to view messages sent from the
WAH7706 (Section 7.7 on page 64).
•Use the Application > Short Message > Draft screen to view messages not yet sent from the
WAH7706 (Section 7.8 on page 64).
•Use the Application > Short Message > SIM SMS screen to view messages received on the
SIM card (Section 7.9 on page 65).
•Use the Application > File Sharing screen to allow file sharing via the WAH7706 using
Windows Explorer or the workgroup name (Section 7.10 on page 66).
7.2 Contact List Screen
Use this screen to configure the contact list saved on the WAH7706. To access this screen, click
Application > Contacts > Contact List.
Chapter 7 Applications
WAH7706 User’s Guide
61
Figure 34 Application > Contacts > Contact List
The following table describes the labels in this screen.
7.3 SIM Contacts Screen
Use this screen to view the contact list saved on the SIM card. To access this screen, click
Application > Contacts > SIM Contacts.
Figure 35 Application > Contacts > SIM Contacts
The following table describes the labels in this screen.
Ta ble 30 Application > Contacts > Contact List
LABEL DESCRIPTION
Delete Select the check box which next to the contact name and click Delete to remove the entry.
New Click New to create a new entry.
Contact Name This field displays a descriptive name used to identify contacts.
Number This field displays the mobile phone number of contacts.
Actions Click Edit to go to the screen where you can edit the contact details.
Ta ble 31 Application > Contacts > SIM Contacts
LABEL DESCRIPTION
This field displays the index number of the contacts.
Contact Name This field displays a descriptive name used to identify contacts.
Number This field displays the mobile phone number of contacts.
Chapter 7 Applications
WAH7706 User’s Guide
62
7.4 Contacts Settings Screen
Use this screen to import or export the contacts files. To access this screen, click Application >
Contacts > Contacts Settings.
Figure 36 Application > Contacts > Contacts Settings
The following table describes the labels in this screen.
7.5 New SMS Screen
Use this screen to send messages using the WAH7706. To access this screen, click Application >
Short Message > New SMS.
Type a phone number and message content. You can type up to 70 characters in one message. If
the message exceeds 70 characters, more than one SMS will be sent. The maximum number of
SMS that can be sent is 20 (1000 characters total). Click Send to send the message. Click Save to
store the message as a draft. Click Reset to reload the previous configuration for this screen.
Ta ble 32 Application > Contacts > Contacts Settings
LABEL DESCRIPTION
Import Contacts
Import from
File
Click Choose File to find the .csv file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Import to begin the upload process.
Export Contacts
Export to File A CSV (comma-separated values) file is a way to store textual and numeric data. A vCard is
an electronic business card, and it can store images and sound as well as text.
Select a contact format from the drop-down list box to export your contacts.
Click Export to begin the download process.
Chapter 7 Applications
WAH7706 User’s Guide
63
Figure 37 Application > Short Message > New SMS
7.6 Inbox Screen
Use this screen to view messages received on the WAH7706. To access this screen, click
Application > Short Message > Inbox.
Figure 38 Application > Short Message > Inbox
The following table describes the labels in this screen.
Ta ble 33 Application > Short Message > Inbox
LABEL DESCRIPTION
Delete All Click Delete All to remove all messages.
This field displays the index number of the message.
From This field displays the name from which the message is sent.
Time This field displays the date and time the message was received.
Content This field displays the content of the message.
Action Click Delete to remove the message record.
Chapter 7 Applications
WAH7706 User’s Guide
64
7.7 Outbox Screen
Use this screen to view messages sent from the WAH7706. To access this screen, click Application
> Short Message > Outbox.
Figure 39 Application > Short Message > Outbox
The following table describes the labels in this screen.
7.8 Draft Screen
Use this screen to view messages not yet sent from the WAH7706. To access this screen, click
Application > Short Message > Draft.
Figure 40 Application > Short Message > Draft
Ta ble 34 Application > Short Message > Outbox
LABEL DESCRIPTION
Delete All Click Delete All to remove all messages.
This field displays the index number of the message.
To This field displays the name the message is sent to.
Time This field displays the date and time the message was sent.
Content This field displays the content of the message.
Action Click Delete to remove the message record.
Chapter 7 Applications
WAH7706 User’s Guide
65
The following table describes the labels in this screen.
7.9 SIM SMS Screen
Use this screen to view messages received on the SIM card. To access this screen, click
Application > Short Message > SIM SMS.
Figure 41 Application > Short Message > SIM SMS
The following table describes the labels in this screen.
Ta ble 35 Application > Short Message > Draft
LABEL DESCRIPTION
Delete All Click Delete All to remove all messages.
This field displays the index number of the message.
To This field displays the name the message is sent to.
Time This field displays the date and time the message was sent.
Content This field displays the content of the message.
Action Click Delete to remove the message record.
Click Send to deliver the message.
Ta ble 36 Application > Short Message > SIM SMS
LABEL DESCRIPTION
Delete All Click Delete All to remove all messages.
This field displays the index number of the message.
From This field displays the mobile phone number from which the message is sent.
Time This field displays the date and time the message was received.
Content This field displays the content of the message.
Action Click Delete to remove the message record.
Chapter 7 Applications
WAH7706 User’s Guide
66
7.10 File Sharing Screen
Use this screen to share files on a micro SD card connected to your WAH7706 with users on your
network. To access this screen, click Application > File Sharing.
Figure 42 Application > File Sharing
The following table describes the labels in this screen.
Ta ble 37 Application > File Sharing
LABEL DESCRIPTION
Enable File
Sharing
Select this to enable file sharing through the WAH7706 using Windows Explorer or by
browsing to your work group.
Server Name Specify the name to identify the WAH7706 in a work group.
Sharing Name You can add the WAH7706 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your WAH7706 automatically joins. You can set the
WAH7706’s workgroup name to be exactly the same as the workgroup name to which your
computer belongs to.
Note: The WAH7706 will not be able to join the workgroup if your local area network has
restrictions set up that do not allow devices to join a workgroup. In this case,
contact your network administrator.
Apply Click this button to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
WAH7706 User’s Guide
67
CHAPTER 8
System
8.1 Overview
Use the system screens to configure general WAH7706 settings.
8.1.1 What You Can Do in this Chapter
•Use the System Information screen to view basic information about the WAH7706 and restart
the WAH7706 (Section 8.2 on page 67).
•Use the User Account screen to set the domain name and change the WAH7706’s system
password (Section 8.3 on page 68).
•Use the Settings Profile screen to reset your device settings back to the factory default, backup
configuration, and restoring configuration (Section 8.4 on page 70).
•Use the Firmware Upgrade screen to upload new firmware to your WAH7706 (Section 8.5 on
page 71).
•Use the Time Settings screen to change the WAH7706’s time and date and configure daylight
saving time (Section 8.6 on page 72).
•Use the Power Saving screen to enable and configure the power saving settings in the
WAH7706 (Section 8.7 on page 74).
•Use the System Log screens to view logged messages and specify to where the WAH7706 is to
send logs (Section 8.8 on page 74).
8.2 System Information Screen
Use this screen to view basic information about the WAH7706 and restart the WAH7706. To access
this screen, click System > System Information.
Chapter 8 System
WAH7706 User’s Guide
68
Figure 43 System > System Information
The following table describes the labels in this screen.
8.3 User Account Screen
This screen allows you to set the domain name and change the WAH7706’s system password. It is
strongly recommended that you change your WAH7706's system password. To access this screen,
click System > User Account.
See Section 2.2 on page 12 for more information about login accounts.
Ta ble 38 System > System Information
LABEL DESCRIPTION
About the 4G Hotspot
Firmware
Version
This displays the current firmware version of the WAH7706.
IMEI This displays the International Mobile Equipment Number (IMEI) which is the serial number
of the built-in 3G module. IMEI is a unique 15-digit number used to identify a mobile device.
Hardware
Version
This displays the hardware version of the WAH7706.
Wi-Fi1 MAC
Address
Wi-Fi2 MAC
Address
This is the MAC address of the wireless network.
Reboot Device
Reboot Device Click Reboot to restart the device. Wait a few minutes until the login screen appears. If the
login screen does not appear, type the IP address of the device in your Web browser.
Chapter 8 System
WAH7706 User’s Guide
69
Figure 44 System > User Account
The following table describes the labels in this screen.
Ta ble 39 System > User Account
LABEL DESCRIPTION
Login Web URL Setting
Web Domain Name Enter the domain name you want to give to the WAH7706.
Apply Click Apply to save your changes back to the WAH7706.
User Settings
Username Username is a unique name to identify the WAH7706 in an Ethernet network.
Password Type your new system password of between 4 and 24 characters. Note that as you type
a password, the screen displays as dot (.) for each character you type.
Confirm Password Type the new password again in this field.
Auto Logout After Type how many minutes a management session can be left idle before the session times
out. The default is 3 minutes. After it times out you have to log in with your password
again.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 8 System
WAH7706 User’s Guide
70
8.4 Settings Profile Screen
The Settings Profile screen allows you to backup and restore device configurations. You can also
reset your device settings back to the factory default. To access this screen, click System >
Settings Profile.
Figure 45 System > Settings Profile
8.4.1 Reset Settings
Click the Restore button to clear all user-entered configuration information and return the
WAH7706 to its factory defaults. The WAH7706 automatically restarts.
You can also press the Reset button on the rear panel to reset the factory defaults of your
WAH7706. Refer to Section 1.7 on page 11 for more information on the Reset button.
Chapter 8 System
WAH7706 User’s Guide
71
8.4.2 Save Current Settings
Enter the profile name you specified in the New Profile Name field, and click Save. The profile
you saved will be displayed in the Profile List field.
The following table describes the labels in this screen.
8.4.3 Import & Export Settings Profile
This screen allows you to upload a new or previously saved configuration file from your computer to
your WAH7706.
Type in the location of the file you want to upload in the Apply Profile from File field or click
Choose File to find it. Remember that you must decompress compressed (.ZIP) files before you
can upload them. Click Apply to begin the upload process. The WAH7706 automatically restarts.
Do not turn off the WAH7706 while configuration file upload is in
progress.
Backup Configuration allows you to back up (save) the WAH7706’s current configuration to a file on
your computer. The configuration file should be saved and edited in UTF-8 (without BOM) format, if
you’re using Windows Notepad, make sure you choose File > Save as UTF-8 in the text editor.
Once your WAH7706 is configured and functioning properly, it is highly recommended that you back
up your configuration file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
Select one profile from the drop-down list box in the Export Profile to File field, and click Export
to save the WAH7706’s current configuration to your computer.
After the WAH7706 configuration has been restored successfully, the login screen appears. If you
uploaded the default configuration file you may need to change the IP address of your computer to
be in the same subnet as that of the default device IP address (192.168.1.1).
8.5 Firmware Upgrade Screen
This screen allows you to upload new firmware to your WAH7706. You can download new firmware
releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
Only use firmware for your device’s specific model.
Ta ble 40 System > Settings Profile
LABEL DESCRIPTION
This field displays the index number of the profile.
profile name This field displays the profile name you specified in the New Profile Name field.
saved date This field displays the saved time and date of the profile.
Action Click Apply to use the configuration to the WAH7706.
Click Delete to go to the screen where you can remove the profile.
Chapter 8 System
WAH7706 User’s Guide
72
To access this screen, click System > Firmware Upgrade. This screen displays the current
firmware version and status of the WAH7706. Type in the location of the file you want to upload in
the Select Firmware File field or click Choose File to find it. Remember that you must
decompress compressed (.ZIP) files before you can upload them. You can select the check box to
return the WAH7706 to its factory defaults after upgrading the new firmware. Click Apply to begin
the upload process.
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After
a successful upload, the system will reboot.
Do NOT turn off the WAH7706 while firmware upload is in progress!
Figure 46 System > Firmware Upgrade
8.6 Time Settings Screen
For effective scheduling and logging, the WAH7706 system time must be accurate. The WAH7706
has a software mechanism to get the current time and date from an external server. To change your
WAH7706’s time zone, click System > Time Settings. The screen displays as shown. You can
have the WAH7706 get the date and time from a time server or change the IP address or URL of
your time server.
Chapter 8 System
WAH7706 User’s Guide
73
Figure 47 System > Time Settings
The following table describes the labels in this screen.
Ta ble 41 System > Time Settings
LABEL DESCRIPTION
Date & Time
Device time This field displays the present time and date of your WAH7706.
Set Automatically Select Prefer Cellular Service Time to to have the WAH7706 get the time and date
from the cellular service server.
Select Prefer NTP server to have the WAH7706 get the time and date from the time
server you specify.
NTP Server
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
NTP Server 1~5 Enter the IP address or URL of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 8 System
WAH7706 User’s Guide
74
8.7 Power Saving Screen
This screen allows you to enable and configure the power saving settings in the WAH7706. To
access this screen, click System > Power Saving.
Figure 48 System > Power Saving
he following table describes the labels in this screen.
8.8 System Log Screen
Use this screen to specify which logs to display and to where the WAH7706 is to send logs. Click
System > System Log. The screen displays as shown.
Ta ble 42 System > Power Saving
LABEL DESCRIPTION
WiFi Power Saving Select the number of minutes the WAH7706 waits before it turns off wireless
connections to save battery power when the USB port is not connected and there is no
wireless clients associating with the WAH7706.
WWAN Power
Saving
Select the number of minutes the WAH7706 waits before it turns off the mobile network
to save battery power when the USB port is not connected and there is no wireless
clients associating with the WAH7706.
Apply Click Apply to save your changes back to the WAH7706.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 8 System
WAH7706 User’s Guide
75
Figure 49 System > System Log
he following table describes the labels in this screen.
Ta ble 43 System > System Log
LABEL DESCRIPTION
System Log Setting
Enable Log Select the check box to enable system logging.
Log Level Select the level of the logs that the WAH7706 is to record and send to the syslog server.
The WAH7706 displays and records the logs with the level equal to or higher than what
you selected.
Enable Remote Log Select the check box to enable syslog logging.
Syslog logging sends a log to an external log server.
Remote Log Host Enter the server name or IP address of the syslog server that will log the selected log
level of logs.
Remote Log Port Enter the port number of the syslog server.
Apply Click Apply to save your changes back to the WAH7706.
Chapter 8 System
WAH7706 User’s Guide
76
Reset Click Reset to reload the previous configuration for this screen.
System Log Display
The log wraps around and deletes the old entries after it fills. Select what logs you want to see from the Log
Level drop list. When you select a log level, the WAH7706 searches through all logs of that level or higher.
The screen displays the time the log message was recorded. It also displays the reason the log message was
generated.
Refresh Click Refresh to renew the log screen.
Ta ble 43 System > System Log
LABEL DESCRIPTION
WAH7706 User’s Guide
77
CHAPTER 9
Troubleshooting
9.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•Power, and Hardware Installation
•WAH7706 Access and Login
•Internet Access
•Wireless Connections
9.2 Power, and Hardware Installation
The WAH7706 does not turn on. The OLED display is not on.
1Make sure the WAH7706 is correctly installed (refer to your Quick Start Guide).
2Make sure the battery is installed and charged. Press the power button to turn the WAH7706 on.
See Section 1.5 on page 9 and Section 1.6 on page 9.
3If the problem continues, contact the vendor.
9.3 WAH7706 Access and Login
I forgot the IP address for the WAH7706.
1The default IP address is 192.168.1.1.
2If you changed the IP address and have forgotten it, you have to reset the device to its factory
defaults. See Section 1.7 on page 11.
Chapter 9 Troubleshooting
WAH7706 User’s Guide
78
I cannot see or access the Login screen in the web configurator.
1Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I
forgot the IP address for the WAH7706.
2Make sure the WAH7706 is correctly installed and turned on. See the Quick Start Guide and Section
1.5 on page 9.
3Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
enabled.
4Make sure your computer is connected to the WAH7706 and is in the same subnet as the WAH7706.
5Reset the device to its factory defaults, and try to access the WAH7706 with the default IP address.
See Section 1.7 on page 11.
6Disconnect your computer from the Internet (Wireless and/or Ethernet) and then insert the
WAH7706 again.
7If the problem continues, contact the vendor.
I forgot the password.
1The default password is admin or guest.
2If this does not work, you have to reset the device to its factory defaults. See Section 1.7 on page
11.
I can see the Login screen, but I cannot log in to the WAH7706.
1Make sure you have entered the user name and password correctly. The default password is 1234.
This fields are case-sensitive, so make sure [Caps Lock] is not on.
2This can happen when you fail to log out properly from your last session. Try logging in again after
five minutes.
3Disconnect and connect to the WAH7706 again.
4If this does not work, you have to reset the device to its factory defaults. See Section 1.7 on page
11.
Chapter 9 Troubleshooting
WAH7706 User’s Guide
79
9.4 Internet Access
I cannot access the Internet through a 3G/4G wireless WAN connection.
1Make sure you insert a 4G SIM card into the card slot before turning on the WAH7706.
2Make sure your mobile access information (such as APN) is entered correctly in the WAN screen.
These fields are case-sensitive, so make sure [Caps Lock] is not on. Check with your service
provider for the correct APN if you don't have it.
3Make sure your SIM card’s account is valid and has an active data plan. Check your service contract
or contact your service provider directly.
4If you are using a pre-paid SIM card, insert the SIM card on another mobile device to check if the
SIM card still works. If the SIM card works without any problems on another mobile device, contact
the vendor. Otherwise, contact your service provider.
5If the problem continues, contact your ISP.
I cannot access the Internet anymore. I had access to the Internet (with the WAH7706), but
my Internet connection is not available anymore.
1Reboot the WAH7706.
2If the problem continues, contact your ISP.
The Internet connection is slow or intermittent.
1There might be a lot of traffic on the network. If the WAH7706 is sending or receiving a lot of
information, try closing some programs that use the Internet, especially peer-to-peer applications.
2Check the signal strength. If the signal strength is low, try moving the WAH7706 closer to the ISP’s
base station if possible, and look around to see if there are any devices that might be interfering
with the wireless network (for example, microwaves, other wireless networks, and so on).
3Reboot the WAH7706.
4If the problem continues, contact the network administrator or vendor.
Chapter 9 Troubleshooting
WAH7706 User’s Guide
80
9.5 Wireless Connections
I cannot access the WAH7706 or ping any computer from the WLAN.
1Make sure the wireless LAN is enabled on the WAH7706.
2Make sure the wireless adapter (installed on your computer) is working properly.
3Make sure the wireless adapter (installed on your computer) is IEEE 802.11 compatible and
supports the same wireless standard as the WAH7706’s active radio.
4Make sure your computer (with a wireless adapter installed) is within the transmission range of the
WAH7706.
5Check that both the WAH7706 and your computer are using the same wireless and wireless security
settings.
Hackers have accessed my WEP-encrypted wireless LAN.
WEP is extremely insecure. Its encryption can be broken by an attacker, using widely-available
software. It is strongly recommended that you use a more effective security mechanism. Use the
strongest security mechanism that all the wireless devices in your network support. WPA2 or WPA2-
PSK is recommended.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages automatically
overwrite existing log messages, starting with the oldest existing log message first.
9.6 Getting More Troubleshooting Help
Search for support information for your model at www.zyxel.com for more troubleshooting
suggestions.
WAH7706 User’s Guide
81
APPENDIX A
Customer Support
In the event of problems that cannot be solved by using this manual, you should contact your
vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you
bought the device.
See http://www.zyxel.com/homepage.shtml and also
http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml for the latest information.
Please have the following information ready when you contact an office.
Required Information
• Product model and serial number.
• Warranty Information.
• Date that you received your device.
• Brief description of the problem and the steps you took to solve it.
Corporate Headquarters (Worldwide)
Taiwan
• ZyXEL Communications Corporation
• http://www.zyxel.com
Asia
China
• ZyXEL Communications (Shanghai) Corp.
ZyXEL Communications (Beijing) Corp.
ZyXEL Communications (Tianjin) Corp.
• http://www.zyxel.cn
India
• ZyXEL Technology India Pvt Ltd
• http://www.zyxel.in
Kazakhstan
•ZyXEL Kazakhstan
Appendix A Customer Support
WAH7706 User’s Guide
82
• http://www.zyxel.kz
Korea
• ZyXEL Korea Corp.
• http://www.zyxel.kr
Malaysia
• ZyXEL Malaysia Sdn Bhd.
• http://www.zyxel.com.my
Pakistan
• ZyXEL Pakistan (Pvt.) Ltd.
• http://www.zyxel.com.pk
Philippines
• ZyXEL Philippines
• http://www.zyxel.com.ph
Singapore
• ZyXEL Singapore Pte Ltd.
• http://www.zyxel.com.sg
Taiwan
• ZyXEL Communications Corporation
• http://www.zyxel.com/tw/zh/
Thailand
• ZyXEL Thailand Co., Ltd
• http://www.zyxel.co.th
Vietnam
• ZyXEL Communications Corporation-Vietnam Office
• http://www.zyxel.com/vn/vi
Europe
Austria
• ZyXEL Deutschland GmbH
• http://www.zyxel.de
Appendix A Customer Support
WAH7706 User’s Guide
83
Belarus
•ZyXEL BY
• http://www.zyxel.by
Belgium
• ZyXEL Communications B.V.
• http://www.zyxel.com/be/nl/
• http://www.zyxel.com/be/fr/
Bulgaria
•ZyXEL България
• http://www.zyxel.com/bg/bg/
Czech Republic
• ZyXEL Communications Czech s.r.o
• http://www.zyxel.cz
Denmark
• ZyXEL Communications A/S
• http://www.zyxel.dk
Estonia
•ZyXEL Estonia
• http://www.zyxel.com/ee/et/
Finland
• ZyXEL Communications
• http://www.zyxel.fi
France
•ZyXEL France
• http://www.zyxel.fr
Germany
• ZyXEL Deutschland GmbH
• http://www.zyxel.de
Hungary
• ZyXEL Hungary & SEE
• http://www.zyxel.hu
Appendix A Customer Support
WAH7706 User’s Guide
84
Italy
• ZyXEL Communications Italy
• http://www.zyxel.it/
Latvia
•ZyXEL Latvia
• http://www.zyxel.com/lv/lv/homepage.shtml
Lithuania
• ZyXEL Lithuania
• http://www.zyxel.com/lt/lt/homepage.shtml
Netherlands
•ZyXEL Benelux
• http://www.zyxel.nl
Norway
• ZyXEL Communications
• http://www.zyxel.no
Poland
• ZyXEL Communications Poland
• http://www.zyxel.pl
Romania
•ZyXEL Romania
• http://www.zyxel.com/ro/ro
Russia
• ZyXEL Russia
• http://www.zyxel.ru
Slovakia
• ZyXEL Communications Czech s.r.o. organizacna zlozka
• http://www.zyxel.sk
Spain
• ZyXEL Communications ES Ltd
• http://www.zyxel.es
Sweden
• ZyXEL Communications
Appendix A Customer Support
WAH7706 User’s Guide
85
• http://www.zyxel.se
Switzerland
•Studerus AG
• http://www.zyxel.ch/
Turkey
•ZyXEL Turkey A.S.
• http://www.zyxel.com.tr
UK
• ZyXEL Communications UK Ltd.
• http://www.zyxel.co.uk
Ukraine
•ZyXEL Ukraine
• http://www.ua.zyxel.com
Latin America
Argentina
• ZyXEL Communication Corporation
• http://www.zyxel.com/ec/es/
Brazil
• ZyXEL Communications Brasil Ltda.
• https://www.zyxel.com/br/pt/
Ecuador
• ZyXEL Communication Corporation
• http://www.zyxel.com/ec/es/
Middle East
Israel
• ZyXEL Communication Corporation
• http://il.zyxel.com/homepage.shtml
Middle East
• ZyXEL Communication Corporation
Appendix A Customer Support
WAH7706 User’s Guide
86
• http://www.zyxel.com/me/en/
North America
USA
• ZyXEL Communications, Inc. - North America Headquarters
• http://www.zyxel.com/us/en/
Oceania
Australia
• ZyXEL Communications Corporation
• http://www.zyxel.com/au/en/
Africa
South Africa
• Nology (Pty) Ltd.
• http://www.zyxel.co.za
WAH7706 User’s Guide
87
APPENDIX B
Common Services
The following table lists some commonly-used services and their associated protocols and port
numbers. For a comprehensive list of port numbers, ICMP type/code numbers and services, visit
the IANA (Internet Assigned Number Authority) web site.
•Name: This is a short, descriptive name for the service. You can use this one or create a
different one, if you like.
•Protocol: This is the type of IP protocol used by the service. If this is TCP/UDP, then the service
uses the same port number with TCP and UDP. If this is USER-DEFINED, the Port(s) is the IP
protocol number, not the port number.
•Port(s): This value depends on the Protocol. Please refer to RFC 1700 for further information
about port numbers.
•If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number.
•If the Protocol is USER, this is the IP protocol number.
•Description: This is a brief explanation of the applications that use this service or the situations
in which this service is used.
Ta ble 44 Commonly Used Services
NAME PROTOCOL PORT(S) DESCRIPTION
AH
(IPSEC_TUNNEL)
User-Defined 51 The IPSEC AH (Authentication Header) tunneling
protocol uses this service.
AIM/New-ICQ TCP 5190 AOL’s Internet Messenger service. It is also used as
a listening port by ICQ.
AUTH TCP 113 Authentication protocol used by some servers.
BGP TCP 179 Border Gateway Protocol.
BOOTP_CLIENT UDP 68 DHCP Client.
BOOTP_SERVER UDP 67 DHCP Server.
CU-SEEME TCP
UDP
7648
24032
A popular videoconferencing solution from White
Pines Software.
DNS TCP/UDP 53 Domain Name Server, a service that matches web
names (for example www.zyxel.com) to IP
numbers.
ESP
(IPSEC_TUNNEL)
User-Defined 50 The IPSEC ESP (Encapsulation Security Protocol)
tunneling protocol uses this service.
FINGER TCP 79 Finger is a UNIX or Internet related command that
can be used to find out if a user is logged on.
FTP TCP
TCP
20
21
File Transfer Program, a program to enable fast
transfer of files, including large files that may not
be possible by e-mail.
H.323 TCP 1720 NetMeeting uses this protocol.
HTTP TCP 80 Hyper Text Transfer Protocol - a client/server
protocol for the world wide web.
Appendix B Common Services
WAH7706 User’s Guide
88
HTTPS TCP 443 HTTPS is a secured http session often used in e-
commerce.
ICMP User-Defined 1Internet Control Message Protocol is often used for
diagnostic or routing purposes.
ICQ UDP 4000 This is a popular Internet chat program.
IGMP (MULTICAST) User-Defined 2Internet Group Management Protocol is used when
sending packets to a specific group of hosts.
IKE UDP 500 The Internet Key Exchange algorithm is used for
key distribution and management.
IRC TCP/UDP 6667 This is another popular Internet chat program.
MSN Messenger TCP 1863 Microsoft Networks’ messenger service uses this
protocol.
NEW-ICQ TCP 5190 An Internet chat program.
NEWS TCP 144 A protocol for news groups.
NFS UDP 2049 Network File System - NFS is a client/server
distributed file service that provides transparent file
sharing for network environments.
NNTP TCP 119 Network News Transport Protocol is the delivery
mechanism for the USENET newsgroup service.
PING User-Defined 1Packet INternet Groper is a protocol that sends out
ICMP echo requests to test whether or not a remote
host is reachable.
POP3 TCP 110 Post Office Protocol version 3 lets a client computer
get e-mail from a POP3 server through a temporary
connection (TCP/IP or other).
PPTP TCP 1723 Point-to-Point Tunneling Protocol enables secure
transfer of data over public networks. This is the
control channel.
PPTP_TUNNEL
(GRE)
User-Defined 47 PPTP (Point-to-Point Tunneling Protocol) enables
secure transfer of data over public networks. This is
the data channel.
RCMD TCP 512 Remote Command Service.
REAL_AUDIO TCP 7070 A streaming audio service that enables real time
sound over the web.
REXEC TCP 514 Remote Execution Daemon.
RLOGIN TCP 513 Remote Login.
RTELNET TCP 107 Remote Telnet.
RTSP TCP/UDP 554 The Real Time Streaming (media control) Protocol
(RTSP) is a remote control for multimedia on the
Internet.
SFTP TCP 115 Simple File Transfer Protocol.
SMTP TCP 25 Simple Mail Transfer Protocol is the message-
exchange standard for the Internet. SMTP enables
you to move messages from one e-mail server to
another.
SNMP TCP/UDP 161 Simple Network Management Program.
SNMP-TRAPS TCP/UDP 162 Traps for use with the SNMP (RFC:1215).
Ta ble 44 Commonly Used Services (continued)
NAME PROTOCOL PORT(S) DESCRIPTION
Appendix B Common Services
WAH7706 User’s Guide
89
SQL-NET TCP 1521 Structured Query Language is an interface to
access data on many different types of database
systems, including mainframes, midrange systems,
UNIX systems and network servers.
SSH TCP/UDP 22 Secure Shell Remote Login Program.
STRM WORKS UDP 1558 Stream Works Protocol.
SYSLOG UDP 514 Syslog allows you to send system logs to a UNIX
server.
TACACS UDP 49 Login Host Protocol used for (Terminal Access
Controller Access Control System).
TELNET TCP 23 Telnet is the login and terminal emulation protocol
common on the Internet and in UNIX
environments. It operates over TCP/IP networks.
Its primary function is to allow users to log into
remote host systems.
TFTP UDP 69 Trivial File Transfer Protocol is an Internet file
transfer protocol similar to FTP, but uses the UDP
(User Datagram Protocol) rather than TCP
(Transmission Control Protocol).
VDOLIVE TCP 7000 Another videoconferencing solution.
Ta ble 44 Commonly Used Services (continued)
NAME PROTOCOL PORT(S) DESCRIPTION
Appendix B Common Services
WAH7706 User’s Guide
90
WAH7706 User’s Guide
91
APPENDIX C
Legal Information
Copyright
Copyright © 2016 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into
any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or
otherwise, without the prior written permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.
Disclaimer
ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it
convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any
products described herein without notice. This publication is subject to change without notice.
Regulatory Notice and Statement
UNITED STATES of AMERICA
The following information applies if you use the product within USA area.
FCC EMC St atement
• The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
device.
• This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
• If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the devices
•Connect the equipment to an outlet other than the receiver’s
•Consult a dealer or an experienced radio/TV technician for assistance
FCC Radiation Exposure St atement
• This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or
transmitter.
CANADA
The following information applies if you use the product within Canada area
Industry Canada ICES statement
ICAN ICES-3 (B)/NMB-3(B)
Appendix C Legal Information
WAH7706 User’s Guide
92
Industry Canada RSS-GEN & RSS-247 st atement
• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
• This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz , the following attention must be paid,
• The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate;
and
• The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) of
RSS 247 shall be clearly indicated.
If the product with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz , the following attention must be paid.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit
• Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
• Le présent émetteur radio de modèle s'il fait partie du matériel de catégorieI) a été approuvé par Industrie Canada pour fonctionner
avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement
interdits pour l'exploitation de l'émetteur.
Lorsque la fonction sans fil 5G fonctionnant en5150-5250 MHz and 5725-5850 MHz est activée pour ce produit , il est nécessaire de porter
une attention particulière aux choses suivantes
• Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire
les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
• Pour les dispositifs munis d’antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5
850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l’exploitation non point à point, selon
le cas;
• Les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée
à la section 6.2.2 3) du CNR-247, doivent être clairement indiqués.
Lorsque la fonction sans fil 5G fonctionnant en 5250-5350 MHz et 5470-5725 MHz est activée pour ce produit , il est nécessaire de
porter une attention particulière aux choses suivantes
• Pour les dispositifs munis d’antennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5 250 à
5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la limite de la p.i.r.e.
Industry Canada radiation exposure statement
This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
EUROPEAN UNION
The following information applies if you use the product within the European Union.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive)
Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/
5/EC (R&TTE)
Български
(Bulgarian) С настоящото ZyXEL декларира, че това оборудване е в съответствие със съществените изисквания и другите
приложими разпоредбите на Директива 1999/5/ЕC.
Español
(Spanish) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Čeština
(Czech) ZyXEL tímto prohlašuje, že tento zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/EC.
Dansk (Danish) Undertegnede ZyXEL erklærer herved, at følgende udstyr udstyr overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Appendix C Legal Information
WAH7706 User’s Guide
93
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
National Restrictions
This product may be used in all EU countries (and other countries following the EU Directive 1999/5/EC) without any limitation except for
the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune
limitation, excepté pour les pays mentionnés ci-dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 1999/5/EC) senza nessuna limitazione,
eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 1999/5/CE
folgen) mit Außnahme der folgenden aufgeführten Staaten:
In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless
local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements
or both are applicable.
The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their
national regulations for both the 2.4GHz and 5GHz wireless LANs.
The following countries have restrictions and/or requirements in addition to those given in the table labeled “Overview of Regulatory
Requirements for Wireless LANs”:.
Belgium
Deutsch
(German) Hiermit erklärt ZyXEL, dass sich das Gerät Ausstattung in Übereinstimmung mit den grundlegenden Anforderungen
und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EU befindet.
Eesti keel
(Estonian) Käesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Ελληνικά
(Greek) ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ZyXEL ∆ΗΛΩΝΕΙ ΟΤΙ εξοπλισμός ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕC.
English Hereby, ZyXEL declares that this device is in compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.
Français
(French) Par la présente ZyXEL déclare que l'appareil équipements est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/EC.
Hrvatski
(Croatian) ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC.
Íslenska
(Icelandic) Hér með lýsir, ZyXEL því yfir að þessi búnaður er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipunar
1999/5/EC.
Italiano
(Italian) Con la presente ZyXEL dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Latviešu valoda
(Latvian) Ar šo ZyXEL deklarē, ka iekārtas atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių kalba
(Lithuanian) Šiuo ZyXEL deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Magyar
(Hungarian) Alulírott, ZyXEL nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EK
irányelv egyéb elõírásainak.
Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagħmir jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li
hemm fid-Dirrettiva 1999/5/EC.
Nederlands
(Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EC.
Polski (Polish) Niniejszym ZyXEL oświadcza, że sprzęt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português
(Portuguese) ZyXEL declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/EC.
Română
(Romanian) Prin prezenta, ZyXEL declară că acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi
relevante ale Directivei 1999/5/EC.
Slovenčina
(Slovak) ZyXEL týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/EC.
Slovenščina
(Slovene) ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/EC.
Suomi
(Finnish) ZyXEL vakuuttaa täten että laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
(Swedish) Härmed intygar ZyXEL att denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EC.
Norsk
(Norwegian) Erklærer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante
bestemmelser I direktiv 1999/5/EF.
Appendix C Legal Information
WAH7706 User’s Guide
94
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range
exceeding 300 meters. Please check http://www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch
Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des
services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails.
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless
this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.” Please
check http://www.sviluppoeconomico.gov.it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in
Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.
Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.
Latvia
The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://
www.esd.lv for more details.
2.4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas: http://
www.esd.lv.
Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in
those countries.
2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding
the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm).
List of national codes
Safety Warnings
• Do not use this product near water, for example, in a wet basement or near a swimming pool.
• Do not expose your device to dampness, dust or corrosive liquids.
• Do not store things on the device.
• Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY
qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting
it to a power outlet.
COUNTRY ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE
Austria AT Liechtenstein LI
Belgium BE Lithuania LT
Bulgaria BG Luxembourg LU
Croatia HR Malta MT
Cyprus CY Netherlands NL
Czech Republic CZ Norway NO
Denmark DK Poland PL
Estonia EE Portugal PT
Finland FI Romania RO
France FR Serbia RS
Germany DE Slovakia SK
Greece GR Slovenia SI
Hungary HU Spain ES
Iceland IS Switzerland CH
Ireland IE Sweden SE
Italy IT Turkey TR
Latvia LV United Kingdom GB
Appendix C Legal Information
WAH7706 User’s Guide
95
• Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor
or cord.
• Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example,
110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it
from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.
• Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.
• CAUTION: Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instruction. Dispose
them at the applicable collection point for the recycling of electrical and electronic devices. For detailed information about recycling of
this product, please contact your local city office, your household waste disposal service or the store where you purchased the product.
• Do not obstruct the device ventilation slots, as insufficient airflow may harm your device.
The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power
supply cord is intended to serve as the disconnect device,
• For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device;
• For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible.
Environment Statement
ErP (Energy-related Products)
ZyXEL products put on the EU market in compliance with the requirement of the European Parliament and the Council published Directive
2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called
as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures,
power consumption has satisfied regulation requirements which are:
Network standby power consumption < 12W, and/or
Off mode power consumption < 0.5W, and/or
Standby mode power consumption < 0.5W.
Wireless setting, please refer to "Wireless" chapter for more detail.
European Union - Disposal and Recycling Information
The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic
waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate
collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development.
Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gemäß den örtlichen Bestimmungen getrennt vom Hausmüll
entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum
Zeitpunkt der Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natürliche Ressourcen zu
sparen und die Umwelt und die menschliche Gesundheit zu schützen.
El símbolo de abajo indica que según las regulaciones locales, su producto y/o su batería deberán depositarse como basura separada de la
doméstica. Cuando este producto alcance el final de su vida útil, llévelo a un punto limpio. Cuando llegue el momento de desechar el
producto, la recogida por separado éste y/o su batería ayudará a salvar los recursos naturales y a proteger la salud humana y
medioambiental.
Le symbole ci-dessous signifie que selon les réglementations locales votre produit et/ou sa batterie doivent être éliminés séparément des
ordures ménagères. Lorsque ce produit atteint sa fin de vie, amenez-le à un centre de recyclage. Au moment de la mise au rebut, la
collecte séparée de votre produit et/ou de sa batterie aidera à économiser les ressources naturelles et protéger l'environnement et la
santé humaine.
Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti
domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello
smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente
e la salute umana.
Symbolen innebär att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat från hushållsavfallet. När den här
produkten når slutet av sin livslängd ska du ta den till en återvinningsstation. Vid tiden för kasseringen bidrar du till en bättre miljö och
mänsklig hälsa genom att göra dig av med den på ett återvinningsställe.
Appendix C Legal Information
WAH7706 User’s Guide
96
Environmental Product Declaration
Appendix C Legal Information
WAH7706 User’s Guide
97
台灣
以下訊息僅適用於產品具有無線功能且銷售至台灣地區
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用， 俟無干擾之虞，始得繼續使用。
無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作， 發射的信號應維持於操作頻帶中
以下訊息僅適用於產品操作於 5.25-5.35 秭赫頻帶內並銷售至台灣地區
• 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
以下訊息僅適用於產品屬於專業安裝並銷售至台灣地區
• 本器材須經專業工程人員安裝及設定，始得 設置使用，且不得直接販售給一般消費者
安全警告
為了您的安全，請先閱讀以下警告及指示 :
• 請勿將此產品接近水、火焰或放置在高溫的環境。
• 避免設備接觸任何液體 - 切勿讓設備接觸水、雨水、高濕度、污水腐蝕性的液體或其他水份。
• 灰塵及污物 - 切勿接觸灰塵、污物、沙土、食物或其他不合適的材料。
• 雷雨天氣時，不要安裝，使用或維修此設備。有遭受電擊的風險。
• 切勿重摔或撞擊設備，並勿使用不正確的電源變壓器。
• 若接上不正確的電源變壓器會有爆炸的風險。
• 請勿隨意更換產品內的電池。
• 如果更換不正確之電池型式，會有爆炸的風險，請依製造商說明書處理使用過之電池。
• 請將廢電池丟棄在適當的電器或電子設備回收處。
• 請勿將設備解體。
• 請勿阻礙設備的散熱孔，空氣對流不足將會造成設備損害。
• 請插在正確的電壓供給插座 ( 如 : 北美 / 台灣電壓 110V AC，歐洲是 230V AC)。
• 假若電源變壓器或電源變壓器的纜線損壞，請從插座拔除，若您還繼續插電使用，會有觸電死亡的風險。
• 請勿試圖修理電源變壓器或電源變壓器的纜線，若有毀損，請直接聯絡您購買的店家，購買一個新的電源變壓器。
• 請勿將此設備安裝於室外，此設備僅適合放置於室內。
• 請勿隨一般垃圾丟棄。
• 請參閱產品背貼上的設備額定功率。
• 請參考產品型錄或是彩盒上的作業溫度。
• 產品沒有斷電裝置或者採用電源線的插頭視為斷電裝置的一部分，以下警語將適用 :
－ 對永久連接之設備， 在設備外部須安裝可觸及之斷電裝置；
－ 對插接式之設備， 插座必須接近安裝之地點而且是易於觸及的。
Viewing Certifications
Go to http://www.zyxel.com to view this product’s documentation and certifications.
ZyXEL Limited Warranty
ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific
period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the
authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of
purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or
replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to
restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally
equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has
been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.
Note
Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other
warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in
no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought
the device at http://www.zyxel.com/web/support_warranty_info.php.
Registration
Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at
www.us.zyxel.com for North American products.
Appendix C Legal Information
WAH7706 User’s Guide
98
Open Source Licenses
This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are
provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under
those Licenses, please contact support@zyxel.com.tw to get it.
Index
WAH7706 User’s Guide
99
Index
A
access 12
authentication 41, 42
RADIUS server 42
B
Broadband 24
C
certifications 94
viewing 97
channel, wireless LAN 40
configuration 8
contact information 81
cookies 12
copyright 91
CTS threshold 41
current date/time 72
customer support 81
D
data fragment threshold 41
date 72
disclaimer 91
documentation
related 2
E
encryption 43
ESSID 80
Extended Service Set IDentification 35
F
filters
MAC address 37, 42
Firefox 12
fragmentation threshold 41
G
General wireless LAN screen 34
Guide
Quick Start 2
H
hardware connections 9
I
installation 8
Internet Explorer 12
IP Address 51
J
Java
permissions 12
JavaScripts 12
Index
WAH7706 User’s Guide
100
L
LEDs 9, 11
limitations
wireless LAN 43
WPS 49
logout
Web Configurator 15
M
MAC address
filter 37, 42
MAC authentication 37
maintenance 8
management 8
managing the device
good habits 9
N
Netscape Navigator 12
O
other documentation 2
overview 8
P
PBC 44
PIN, WPS 44
example 46
pop-up windows 12
preamble 41
Push Button Configuration, see PBC
push button, WPS 44
Q
Quick Start Guide 2
R
RADIUS server 42
related documentation 2
RTS threshold 41
S
screen resolution 12
security
wireless LAN 41
Service Set 35
SIM card 9
SSID 42
status 20
supported browsers 12
T
thresholds
data fragment 41
RTS/CTS 41
time 72
U
use 8
W
WAN
Wide Area Network, see WAN 24
warranty 97
note 97
Index
WAH7706 User’s Guide
101
Web Configurator 9, 12
access 12
requirements 12
supported browsers 12
web configurator 8
WEP 43
Wi-Fi 32
wireless channel 80
wireless LAN 32, 39, 80
authentication 41, 42
channel 40
encryption 43
example 39
fragmentation threshold 41
limitations 43
MAC address filter 37, 42
preamble 41
RADIUS server 42
RTS/CTS threshold 41
security 41
SSID 42
WEP 43
WPA 43
WPA-PSK 43
WPS 44, 46
example 47
limitations 49
PIN 44
push button 44
wireless security 80
WPA 43
WPA-PSK 43
WPS 44, 46
example 47
limitations 49
PIN 44
example 46
push button 44