ASUS GC31R User Manual
Displayed below is the user manual for GC31R by ASUS which is a product in the External Graphics Card Enclosures category. This manual has pages.
Related Manuals
ROG XG Mobile Setup Guide
Front View
Rear View
Kickstand
Air vents Left View (with ROG XG Mobile connector)
Right View
Power connector
USB 3.2 Gen 1 port
Air vents
Unlock switch
Release clips
Status indicator
Top View
Air vents
Memory card reader
Getting started
IMPORTANT! Follow the instructions and ensure to save all data and stop applications that are
using the current GPU before switching the GPUs.
1. Plug the bundled AC power cord into the power connector of your ROG XG Mobile.
2. Plug your ROG XG Mobile into a 100V~240V power source.
3. Plug the ROG XG Mobile connector into your Notebook PC’s ROG XG Mobile interface
and USB Type-C® combo port.
4. Once you see the status indicator on the ROG XG Mobile connector turns white, push
the unlock switch to to lock the connector.
5. In the pop-up Settings window, activate the ROG XG Mobile. The status indicator turns
red when the activation is complete.
Connect your ROG XG Mobile
LAN port
HDMI port
DisplayPort
NOTE: For more information on devices supporting the ROG XG Mobile, please visit the ROG
ocial website.
More info:
E17279
First Edition / December 2020
E17279_GC31_UM_8pages.indd 1-4E17279_GC31_UM_8pages.indd 1-4 12/15/2020 10:37:46 AM12/15/2020 10:37:46 AM
WARNING!
• This device is not suitable for use in locations where children are likely to be present.
• This device is not a toy. Keep out of reach of children.
• For your safety, connect this device to a properly grounded electrical outlet only.
1. Left or right-click in the notication area (the right end of the taskbar) and
deactivate the ROG XG Mobile in the Settings window.
2. When the status indicator on the ROG XG Mobile connector turns white, push the
unlock switch to to unlock the connector.
3. Press the release clips on both sides of the ROG XG Mobile connector to remove your
ROG XG Mobile from your Notebook PC.
Remove your ROG XG Mobile
Safety notices for your ROG XG Mobile
Copyright Information
You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without
limitation, in the Manual or website, are and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND
INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY ASUS.
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
Coating Notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating
is applied to insulate the device except on the areas where the I/O ports are located.
India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of
lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated
diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials
and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed
in Schedule II of the Rule.
UL Safety Notices
• DO NOT use the External Graphics Extender near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
• DO NOT use the External Graphics Extender during an electrical storm. There may be a remote
risk of electric shock from lightning.
• DO NOT use the External Graphics Extender in the vicinity of a gas leak.
IMPORTANT!
• Never attempt to disassemble and reassemble the product.
• This product should only be used in environments with ambient temperatures between 5°C
(41°F) and 35°C (95°F).
• Power supply specications:
- Input voltage: 100-240Vac
- Input frequency: 50-60Hz
- Rating output current: 5A (100W)
- Rating output voltage: 20V
Federal Communications Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077
Responsible Party:
Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name :
External Graphics Extender
Model Number :
GC31 (GC31S, GC31R)
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ver. 180620
Simplied EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration
of conformity is available at https://www.asus.com/support/.
E17279_GC31_UM_8pages.indd 5-8E17279_GC31_UM_8pages.indd 5-8 12/15/2020 10:37:46 AM12/15/2020 10:37:46 AM