Table of Contents
ASUS MZ27AQ User Manual
Displayed below is the user manual for MZ27AQ by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
MZ27A Series
LCD Monitor
User Guide
harman/kardon
ii
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
First Edition
June 2017
iii
Table of contents
Notices ......................................................................................................... iv
Safety Information ....................................................................................... v
Care & Cleaning ......................................................................................... vii
Takeback Services .................................................................................... viii
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor base ..................................................... 1-2
1.3.1 Connecting the Woofer ................................................... 1-3
1.4 Connect cables ............................................................................. 1-4
1.4.1 Rear of the LCD monitor ................................................. 1-4
1.5 Monitor introduction .................................................................... 1-5
1.5.1 Using the 5-way button ................................................... 1-5
1.5.2 QuickFit Function ............................................................ 1-6
1.5.3 EyeCheck Function ......................................................... 1-7
2.1 Adjusting the monitor .................................................................. 2-1
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 Howtorecongure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-2
3.2 Specications ............................................................................. 3-10
3.3 Troubleshooting (FAQ) .............................................................. 3-11
3.4 Supported Timing List ............................................................... 3-12
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product implements power management functionality. In case of no
signal input after 10 seconds, the product automatically goes to sleep/
standby mode.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energyefciency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
AEEE Yönetmeliine Uygundur
v
Safety Information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
• This product may contain chemicals known to the State of California
to cause cancer, and birth defects or other reproductive harm. Wash
hands after handling.
vi
• This product complies with the “India E-Waste (Management) Rules,
2016” and prohibits use of lead, mercury, hexavalent chromium,
polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers
(PBDEs) in concentrations exceeding 0.1 % by weight in homogenous
materials and 0.01 % by weight in homogenous materials for cadmium,
except for the exemptions listed in Schedule II of the Rule.
vii
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
viii
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
1-1
ASUS LCD Monitor MZ27A Series
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x Adapter
1x Woofer
1x HDMI cable (optional)
1x DP cable (optional)
•If any of the above items is damaged or missing, contact your retailer
immediately.
CAUTION
harman/kardon
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Have the front of the monitor face down on a table.
2. Attach the base to the arm.
3. Turn the screw clockwise to secure the base. Then adjust the monitor
to the angle that is most comfortable for you.
•We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1-3
ASUS LCD Monitor MZ27A Series
1.3.1 Connecting the Woofer
1. Detach the woofer stand and unroute the woofer cable.
2. Align the triangle marks on the woofer and on the stand. Then
replace the stand.
3. Connect the woofer cable to the monitor's woofer jack.
HDMI-2 HDMI-1
1-4 Chapter 1: Product Introduction
1.4 Connect cables
1.4.1 Rear of the LCD monitor
HDMI-2 HDMI-1
HDMI-2 HDMI-1
8 9 10
1 2 3 3 4
5 6 7
1. 5-way button
2. Power indicator
3. Stereo speakers
4. Kensington Lock
5. Woofer jack
6. Earphone jack
7. HDMI-2 port
8. HDMI-1 port
9. DisplayPort
10. DC-IN port
1-5
ASUS LCD Monitor MZ27A Series
1.5 Monitor introduction
1.5.1 Using the 5-way button
Use the 5-way button on the back of the monitor to adjust the image
settings and more. Move the 5-way button into 5 different positions to
activate various functions.
Menu
Close
Power Off
Volume
Blue Light Filter
1
2
3
4
5
1. Menu:
Push the
5-way
button:
• Once to enter the
button functions menu
.
• Twice to enter the OSD menu.
2. Close:
• Move the
5-way
button left to
close the button functions menu.
3. Power off:
• Move the 5-way
button right to power off the monitor
.
• The color definition of the power indicator is as the table below.
Status Description
White ON
Amber Standby mode
OFF OFF
4. Volume:
• Move the 5-way
button up to enter the Voulme menu
.
5. Blue Light Filter:
• Move the 5-way
button down to enter the Blue Light Filter menu
.
1-6 Chapter 1: Product Introduction
1.5.2 QuickFit Function
The QuickFit function allows users to have a preview of the document or
photo layout directly on screen without printing test copies.
QuickFit has three patterns:
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid 1 Alignment Grid 2
2. Paper size: Provides users to view their documents in real size on the
screen.
A4 B5 Letter
A4 B5 Letter
EXIT
3. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
3x5
2x2
4x6
8x10 5x7
1-7
ASUS LCD Monitor MZ27A Series
1.5.3 EyeCheck Function
The EyeCheck function contains three patterns: (1) Snellen Chart
(2) Amslter Grid (3) Astigmatism.
1. Snellen Chart
P1 P2 P3
L0.1
L0.2
L0.3
L0.4
L0.5
L0.6
L0.7
L0.8
L0.9
L1.0
L1.2
•To switch between P1~P3,
move the 5-way
button down.
2. Amslter Grid
While focusing at the center point, to check all lines should be straight.
3. Astigmatism
To check each line should be the same width.
2-1 Chapter 2: Setup
2.1 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling while changing its
angle.
• Youcanadjustthemonitor’sanglefrom-5˚to22˚.
-5˚ to +22˚
•It is normal that the monitor slightly shakes while you adjust the viewing
angle.
3-1 Chapter 3: General Instruction
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Splendid
Scenery mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
Standard Mode HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
MOVE/ENTER BACK/EXIT
1. Push the 5-way button twice to activate the OSD menu.
2. Move the 5-way button (left, right, up, or down) to toggle
between options in the menu. As you move from one icon to another,
the option name is highlighted.
3. To select the highlighted item on the menu, push the button.
4. Move the 5-way button or to select the desired parameter or
adjust the parameter value on the slide bar.
5. Move the 5-way button once to return to previous menu or
button repeatedly to exit the OSD menu.
• In OSD menu > Sound > AudioWizard > User Mode submenu, push the
button to exit the equalizer settings menu.
3-2
ASUS LCD Monitor MZ27A Series
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
Splendid
Scenery mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
Standard Mode HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
MOVE/ENTER BACK/EXIT
• Scenery mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Intelligence Technology.
• Standard Mode: This is the best choice for document editing
with SPLENDID™ Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with
SPLENDID™ Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene
game or watching dark-scene movie with SPLENDID™ Video
Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and
graphics from PCs.
• Reading Mode: This is the best choice for book reading with
SPLENDID™ Video Intelligence Technology.
• Darkroom Mode: This is the best choice for a weak ambient
light environmen with SPLENDID™ Video Intelligence
Technology.
3-3 Chapter 3: General Instruction
• In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR
functionsarenotuser-congurable.
• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness,
Brightness,Contrast,andASCRfunctionsarenotuser-congurable.
• In the Reading Mode, the Saturation, SkinTone, ASCR, Contrast, and Color
Temp.functionsarenotuser-congurable.
2. Blue Light Filter
In this function, you can adjust the blue light filter level.
Standard Mode
MOVE/ENTER
Blue Light Filter
Level 0
Level 1
Level 2
Level 3
Level 4
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
• Level 0: No change.
• Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated, the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level 3,
the Brightness function is user-configurable. Level 4 is optimized
setting. It is compliance with TUV Low Blue Light Certification.
The Brightness function is not user-configurable.
• Users should take some time away from the display if working for long
hours: It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduce eye strain. Repeat these exercises often.
If eye strain continues, please contact a physician. Eye exercoses: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Use Blue Light Filter to reduce 70% (max.) harmful
blue light to avoiding CVS (Computer Vision Syndrome).
3-4
ASUS LCD Monitor MZ27A Series
3. Color
Select the image color you like from this function.
Standard Mode
MOVE/ENTER
Color
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
• Brightness: Adjust the brightness level. The adjusting range is
from 0 to 100.
• Contrast: Adjust the contrast level. The adjusting range is from
0 to 100.
• Saturation: Adjust the saturation level. The adjusting range is
from 0 to 100.
• Color Temp.: Select the desired color temperature. Available
options: Cool, Normal, Warm, and User Mode.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
congurable;theadjustingrangeisfrom0~100.
• Skin Tone: Select the desired skin color. Available options:
Reddish, Natural, and Yellowish.
3-5 Chapter 3: General Instruction
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, and Adaptive-Sync from this main function.
Standard Mode
MOVE/ENTER
Image
Sharpness
VividPixel
ASCR
Trace Free
Aspect Control
Adaptive-Sync
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjust the aspect ratio to Full, 4:3, or
OverScan.
• 4:3 is only available when input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technol ogy that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync: Allows an Adaptive-Sync supported graphics
source (HDMI and DisplayPort) to dynamically adjust display
refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.
3-6
ASUS LCD Monitor MZ27A Series
5. Sound
Adjust the sound settings to your preference.
Standard Mode
MOVE/ENTER
Sound
Volume
AudioWizard
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
• Volume: Adjusts the output volume level.
• AudioWizard: Select the preset sound mode. Available options:
Music Mode, Movie Mode, Gaming Mode, and User Mode.
• In the User Mode, you can adjust the equalizer settings.
6. Input Select
Select the input source.
Standard Mode
MOVE/ENTER
HDMI-1
HDMI-2
Input Select
DisplayPort
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
3-7 Chapter 3: General Instruction
7. System Setup
Adjustthesystemconguration.
Standard Mode
MOVE/ENTER
System Setup
Splendid Demo Mode
GamePlus
QuickFit
EyeCheck
ECO Mode
OSD Setup
Language
More
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
(Page 1/2)
Standard Mode
MOVE/ENTER
System Setup
Back
Key Lock
Information
Power Indicator
Power Key Lock
All Reset
HDMI-1 2560 x 1440 @ 60Hz
ASUS MZ27A
BACK/EXIT
(Page 2/2)
• Splendid Demo Mode: Activate the demo mode for the
Splendid function.
• GamePlus: The GamePlus Function provides a toolkit and
creates a better gaming environment for users when playing
different types of games. Particularly, Crosshair function is
specially designed for new gamers or beginners interested in
First Person Shooter (FPS) games.
3-8
ASUS LCD Monitor MZ27A Series
To active GamePlus:
• Select ON to enter the GamePlus main menu.
• Move the 5-way button or to select between
Crosshair, Timer, and FPS Counter function.
• Push the 5-way button toconrmthefunctionyou
choose. Move the 5-way button to go back.
GamePlus Main Menu GamePlus — Crosshair GamePlus — Timer
NEXT BACK/EXIT
GamePlus
FPS
Crosshair
FPS Counter
Display Alignment
Timer
GamePlus
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus — FPS
Counter
NEXT BACK/EXIT
GamePlus
FPS
3-9 Chapter 3: General Instruction
• QuickFit: Please refer to page 1-6.
• EyeCheck: Please refer to page 1-7.
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and
Transparency of the OSD screen.
• Language: Select OSD language.
• More: Return the next page of System Setting.
• Back: Return the previous page of System Setting.
• Key Lock: Pressing the second button on the right for more than
five seconds to activate the key lock function.
• Information: Display the monitor information.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: Disable/Enable the power key.
• All Reset: Select YES to revert all settings to the factory default
mode.
3-10
ASUS LCD Monitor MZ27A Series
3.2 Specications
Model MZ27AQ
Panel Size 27.0 inches (68.6 cm) diagonal
(Active Display Area: 596.74 (H) x 335.66 (V) mm
Max. Resolution 2560 (H) x 1440 (V) pixels
Brightness (Typ.) 350 cd/m2
Contrast Ratio (Typ.) 1000:1
Viewing Angle
(CR≤10) 178°(V);178°(H)
Display Colors 16.7M colors (8 bits)
Response Time (Typ.) 5ms (G to G)
Terminals
Inputs: 2 HDMI, 1 DP
Audio
input: N/A
Audio
Speaker
Speaker
output: Yes (stereo 6W x2, external woofer 5W x1)
Power consumption ≤ 52W
Standby power
consumption < 0.5W at AC100V ~ AC220V
Power off power
consumption < 0.5W at AC100V ~ AC220V
Phys. Dimension (incl.
base) (HxWxD) 433.2 x 613.6 x 225.2 mm
Box Dimension
(HxWxD) 695±5 x 517±5 x 127±5 mm
Net Weight (incl. stand) 4.3 ±1.0 kg
Gross Weight (Esti.) 6.8 ±1.0 kg
VESA Wall Mounting N/A
Voltage Rating 65W adapter DC 19V 3.42A
AC 100 ~ 240V at 50/60Hz (Delta ADP-65GD B)
Temperature Operatingtemperature:0~40˚C
Storagetemperature:-30~65˚C
Accessories Power cable, Adapter, Quick Start Guide, Warranty card, Woofer,
HDMI cable (optional), DP cable (optional)
Regulation approvals
CE, CB, BSMI, FCC, CCC, CU(EAC), VCCI, RCM, UL/cUL,
MSIP(KCC), KC(EK), Energy Star 7.0, HDMI, DP, Windows 7/8/10
WHQL, China Energy Label, E-Standby, GEMS, J-Moss, EPEAT
(SILVER), RoHS, WEEE, EuP(Energy Saving Only)
*Specicationssubjecttochangewithoutnotice.
3-11 Chapter 3: General Instruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the 5-way button to check if the monitor is
in the ON mode.
• Check if the power adapter is connected to the
monitor and the power cord is properly connected to
the adapter and the power outlet.
• Check Power Indicator function in main menu OSD.
Select ON to turn on power LED.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the ON
mode.
• Make sure the signal cable is properly connected the
monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available monitor
to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Select the appropriate Color Temperature via OSD.
No sound or sound is low • Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
3-12
ASUS LCD Monitor MZ27A Series
3.4 Supported Timing List
Mode Resolution
(active dot)
Resolution
(total dot)
Horizontal
Frequency
(KHz)
Vertical
Frequency
(Hz)
Nominal Pixel
Color (MHz)
DOS 720x400@70Hz 900 x 449 31.469 70.087 28.322
VGA
640x480@60Hz 800 x 525 31.469 59.940 25.175
640x480@72Hz 832 x 520 37.861 72.809 31.500
640x480@75Hz 840 x 500 37.500 75.000 31.500
SVGA
800x600@56Hz 1024 x 625 35.156 56.250 36.000
800x600@60Hz 1056 x 628 37.879 60.317 40.000
800x600@72Hz 1040 x 666 48.077 72.188 50.000
800x600@75Hz 1056 x 625 46.875 75.000 49.500
XGA
1024x768@60Hz 1344 x 806 48.363 60.004 65.000
1024x768@70Hz 1328 x 806 56.476 70.069 75.000
1024x768@75Hz 1312 x 800 60.023 75.029 78.750
VESA 1152x864@75Hz 1600 x 900 67.5 75.000 108.00
SXGA
1280x1024@60Hz 1688 x 1066 63.981 60.020 108.000
1280x1024@75Hz 1688 x 1066 79.976 75.025 135.00
1280x960@60Hz 1800 x 1000 60.000 60.000 108.00
WXGA
1280x800@60Hz 1680 x 831 49.702 59.810 83.500
1280x720@60Hz 1650 x 750 45.00 60.000 74.25
1280x768@60Hz 1664 x 798 47.776 59.870 79.5
1360x768@60Hz 1792 x 795 47.712 60.015 85.500
1366x768@60Hz 1792 x 798 47.712 59.790 85.500
WXGA+ 1440x900@60Hz 1904 x 934 55.935 59.887 106.500
UXGA 1600x1200@60Hz 2160 x 1250 75.000 60.000 162.000
WSXGA+ 1680x1050@60Hz 2240 x 1089 65.290 59.954 146.250
WUXGA 1920x1080@60Hz 2200 x 1125 67.500 60.000 148.500
WQHD 2560x1440@60Hz 2720 x 1481 88.79 59.95 241.5
MAC 640x480@66.66Hz 864 x 525 35 66.66 30.24
SVGA 832x624@75Hz 1152 x 667 49.714 74.533 57.27
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.